Transfer R/3 Quality Notifications to CRM
Hello CRM Fellows,
has anyone tried to Transfer R/3 Quality Notifications to CRM? Quality Notifications are store in the R/3 Table QMEL. A search in the CRM Table SMOFTABLES returns no Results for the Key QMEL in the field R3TABNAME. So it seems that there is no standard Exchange defined for Quality Notifications. Is there a way to exchange them?
Regards
Gregor
Gregor,
Unfortunately it looks like that object only supports mobile sales and not CRM online, since it went to a SMO* table. You could probably create a custom adapter object that reuses some of the standard extractors to get the data into the CRM online database. Unfortuantely it looks like your option is to do some middleware enhancements at this point.
I would guess if you can reuse extractor modules that were built for mobile on the R/3 end and only have to write the CRM portion, you might be able to get the object built in two months or less.
Good luck,
Stephen
Similar Messages
-
Transfer posting to block stock through quality notification
Dear QM Experts,
I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
1. Material is batch managed
2. Storage location is managed by warehouse management and has storage bin.
3. Material has split valuation
When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
I would be grateful, if someone can throw some light on this.
Thanking you,
Anand RaoWhich valuation category do you use in material master accounting view?
In my experience..
Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
Anyway try below..
At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
I'm not sure why your batch master does not have a valuation type.
Regards
Luke -
Enhancement to automate Quality notification after stock transfer posted.
Hi PP Gurus,
Here we need to create Quality Notification (type Q2 and Q3) only when Stock of material is moved to Blocked stock through movement type 344. If the material/batch is against vendor it should open Quality notification type Q2 and if it is against Production order it should open Quality Notification type Q3.
If anybody worked on such requirement please help.
Thanks & Regards,
Abu ArbabHi,
The development is done using MB_DOCUMENT_BADI (which will be triggered once document is posted against movement type 344), which eventually trigger FM IQS0_CREATE_VIQMEL.
Best Regards,
Abu Arbab
Edited by: abu arbaba on Mar 20, 2009 4:06 PM -
SAP ECC Service notification from CRM Complaint
Hi,
As there are some links and document are available to create the quality notification in SAP ECC from the CRM complaint, using action profile for this some setting also needed in SAP ECC QM, but as in ECC we already have the service notification (IW51) which is working fine, is there any option to create the service notification in SAP ECC instead of quality notification.
Regards,
ZafarHi,
In the notification type, insted of quality notification just maintain the service/PM notification type system will create the notification in SAP ECC.
We also wanted some other details to be pass from CRM to ECC for that we have created a function module in SAP ECC which updates the notiifcation and then that function module need to be called in SAP CRM after the Create Notification FM in SAP CRM Action.
Regards,
Zafar -
Quality Notification- Action Box
HI,
I am configuring Quality Notifications for Customer related defect and Material defect. In Action Box I have to include transfer posting from unrestricted to quality inspection and also transfer posting from unrestricted to Blocked stock.
I want to know which functional module I have to include in customization of action box and also which Functional module should be processed when doing saving.
I have used functional module QMLR_CREATE_INSP_LOT and Functional module which have to be processed while saving is QMLR_CREATE_INSP_LOT_STEP2 for vendor related defects.
Now to configure Customer related defect and Material defect, what Functional module I have to use and what Functional module I have to use while to process saving.
Thanx in Advance,
Praveen KumarHi,
Quality notification is like a complaint report. By using tcode QM01, you can create.
In this give input of material no in reference object tab page.
In subject give coding, ex.. rewok, rejection.and complaint qty.
In execution give the coordinator name.
After that release.
Reward points if useful.
Regards,
Dharma -
If Quality notification as follow up action fails
Dear all
I have a situation where Quality notification is configured as a Follow up action once the UD is made.
So I am getting Create notification screen once UD is filled and SAVE button is clicked.
In Case some wrong data is entered in the Create notification screen and I am coming out of Notification without saving the notification.
The status of the inspection lot is getting flipped to UDed as expected.
But is there any setting where i can define if the Followup action is not successful( Notification not created), then wont make the UD of Inspection lot also. (OR some user status will get updated saying Notif not created etc..)Hi Navdeep,
Thanks to Anand for his correct feedback.
Please note that as per standard SAP, unless and otherwise there is a defect created, there can't be a 1:1 link with inspection lot with the notification, though in the notification header table there is a placeholder available (QMEL-PRUEFLOS) to capture this inspection lot field. You are trying to use a follow-up action wherein, after UD you are always creating a notification based on business case. I believe, the FM you are using in follow-up action, is not presently populating QMEL-PRUEFLOS. So there can't be a link to find out when there is failures in notification creation, but UD happening successfully.
You can try out the below approach -
Approach - 1
During the UD save process, there should be additional checks happening. Ask the follow-up FM to update QMEL-PRUEFLOS or TEXT field with inspection lot for all successful notification creation and UD update, and send a confirmation email to approver or task processing partners, or the UD processing user ID (This email part can be skipped in case if this is not required). In case of any failures in notification creation at save, it should truncate the UD save process too and send a message to UD processing user for this failure.
Approach - 2
You can create a batch job running at the background to validate for which inspection lot there is no notification created, even though UD is done. Send a mail to the UD processing user to create a notification, as that is not created. User can then create it manually it by updating TEXT field in notification in foreground.
Thanks,
Arijit -
Existing Quality Notification takes long time to open for certain vendors
Hello Gurus,
I have users complaining about the wait time( 2 t0 5 mintues) when opening of an Quality notification in QM03 for certain vendors. For soem vendors its fast and they always fast but for some it takes really long time and it always long.
I tried the sql trace but nothin out of ordinary compare to the ones both kind slow and fast.
Any help or idea would be really appreciated1
Regards,
KhanDear Khan
I think you need refer this to SAP itself. This is more of some program error than your execution. Please check this note if it can help you
Note 1324998 - IQS9: Performance for general selection
Regards
Gajesh -
Email and sms alerts against Quality Notifications
I need to send an e-mail and an sms alert to various people within the organisation and to the respective vendor whenever I create a Quality notification. I also need to attach a copy of the print out of the notification in Smart form alongwith the mail. Please suggest.
Regards
SudhirHi,
You can send the e-mail to all concerned via standard workflow or via using some exits at the time of saving of notification also.
Thanks
SUMIT -
Automatic Creation of Quality Notification
Dear All,
In standard SAP whenever defects recording is done for an inspection lot and saved,automatically a quality notification is also created.In my business scenario they will record defects for almost all the inspection lots hence resulting in a huge number of unwanted quality notification which then later wont be processed at all.
Hence i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
Expecting your valuable comments
Regards
JRHi
i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
1.This is very much possible through SPRO setting.
QCC0>Quality planning>catalogs>select defect calss->
like for Minor defect-->remove Raido button & make it No active function
Just a suggetion ...what you can do for all Critical & major type of defect keep "Active Notification"
for Minor type of defects keep "No Act fuction"
this will reduce unnecessory notification.
2.If you permanently want to remove all notification after defect recording then
Go to Inspection type setting in SPRO & remove notification against inspection type.
QCC0>Qul insp>Insp lot creation-->maintain inspec type.
Regards
Sujit -
Creation of Quality notification
Hi,
I need to create quality notification using BAPI_QUALNOT_CREATE.
I have to create cause text too for the notification.
Can someone guide me to fill the necessary data for header and text.
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 7, 2011 4:37 PMHi
i wanted to know whether anything can be done to stop auto creation of notification.Is there anything which i could in IMG or any setting to avoid that???
1.This is very much possible through SPRO setting.
QCC0>Quality planning>catalogs>select defect calss->
like for Minor defect-->remove Raido button & make it No active function
Just a suggetion ...what you can do for all Critical & major type of defect keep "Active Notification"
for Minor type of defects keep "No Act fuction"
this will reduce unnecessory notification.
2.If you permanently want to remove all notification after defect recording then
Go to Inspection type setting in SPRO & remove notification against inspection type.
QCC0>Qul insp>Insp lot creation-->maintain inspec type.
Regards
Sujit -
Polish letters not displayed correctly in quality notification long text
Hello,
in quality notification: when trying to write text in Polish language, some non-english letters are displayed incorectly.
I did not find possibility to change the text language as in e.g. sales order texts. Using PL as login language solves the situation if MS Word view of long text is opened but not if text displayed in notification in "SAP view". Anyway different login language is not desired solution.
Any help is appreciated
Thanks
Br JanIs there any possibility of upgrading?
2.5.2 is over 5 years old now and there are many improvements and bug fixes for language support in newer versions. -
QM_Control on Required start date in quality notifications
Dear QM experts,
Requirement is,
For Q2 notification type the entries in required start date filed (QMEL-STRMN) to be restricted in such a way so that user can not do entry for last month.
Foe example,
1. Today is June 12, 2009. If a user is creating Q2 notification today he/she may change the required start date in the past but not before 1st June 2009.
2. User should be in a position to enter back date in required filed only for the current month
3. The concept is just similar to period closing activities.
I tried through SPRO-Quality Management-Quality notifications-Notification creation u2013Notification types-Define screen templates-Field Selection: General Screens. Here there is facility to make the field grey, hide or required. One of the limitations is that this is client level setting.
Can the requirement be mapped for particular plant and for perticular notification type?
Thanks is advance
Best Regards,
Anand RaoDear Anand
Here are some of the thoughts. Please check and then come back with your feedback
1) Make Priority button mandatory for Q2 notification .VIQMEL-PRIOK. You can do only for Notification type Q2 by using the influencing fields
2) Make required date in grey so that no changes can be done . do this notification Q2
2) Maintain QM priorities SPRO >Quality Notifications > Notification Processing>Response Control> Define Priorities
3) Maintain Priorities in the QM priority in the same config
When you set the priority in the notification required from and end date is updated in the system automatically
4) Use this exit QQMA0018 Deadline setting based on entered priority to make sure that always the date doesnt fall on past date
Hope this gives some idea
Regards
gajesh -
Quality notification - more reference objects
Hello,
business need is to have quality notification with possibility to refer either production order or purchase order under one notification type.
By standard this seems not possible as:
Complaint Against Vendor references to Purchase order
Internal Problem Report references to Production order.
But in section "User-specific notification" is mentioned
A user-specific notification type has the same basic structure as the standard, predefined notification types. The screen layouts, reference objects, and tab indexes, however, may differ from those in the predefined notification types, depending on how you customize the user-specific notification type.
But I have not found a way in customizing to enable this.
Advice appreciated.
Br, JanThanks for the asnwer, but I think this does not solve my problem.
In the configuaration for "Notification Header and Screen Areas" I do have
- notification header screen H500
- customized screen O550 (BADI)
and both are needed.
The BADI is used to customize refernce object screen, not reference documents screen. But my idea was to change reference document screen area in a way, that both purhcasing and production reference documents are visible in there.
I only managed to get the vendor screen by adding screen area 037 to "Extended View: Tabstrips and Screen Areas" But adding purhcase document as reference to Reference documents remains my problem.
I am kind of able to make the vendor screen visible by e.g. adding screen area 037 Partner overview screen (table control).But creating a new pop-up window for notification reference, where both options (pur ord, prod ord) would be available with copying functionality - in my opinion this requiers completely custom coding. -
Vendor Return Delivery through Quality Notification.
Hi Experts,
I m doing vendor return delivery through quality notification with action box , after giving PO NO. & Material document no we are getting the following error
1) Could not create return delivery
2) Deficit of PU IR quantity 2.000 EA
For the GR based IV reversal after IR tick is not active.
Kindly suggest possible reason for the same
Thanks & Regards
RajeshHi
There is deficit of Quantity i.e the quantity lying in stock is less than 2. and secondly for GR based invoice verification the IR tick should be there in PO in Invoice tab. -
I need to create a Notification in CRM WebUI When we create a new contract
Hi Experts,
I am working in Utility Industry and as per the business requirement I need to create a Notification in CRM WebUI
When we create a new contract & click on apply button.
As per my knowledge we are not maintaining Notification information in CRM System. So could you please
help me to call IW52 during the new contract creation when we click on apply button.
Thanks
RoliHello Roli,
If your requirement is to launch Transaction IW52 after clicking apply button then you can use Transaction Launcher tool in CRM to integrate to CRM WebClient UI.
Calling Transaction Launcher on user action
BOR object or ITS based Transaction Launcher
Regards,
Ashik
Maybe you are looking for
-
Show discontuation / Follow-up materials in Purchase Requisition.
Dear Experts, How can we show discontinuation & Follow-up materials in Purchase Requisition, just like Planned Order. Purchaser would like to know what portion of purchase is atributed to follow-up materials. Anyone good enough
-
Photoshop CC and 2014 spot healing brush tool causing blue screen on windows 8.1
Hi, The problem is when I'm using spot healing brush tool soon as apply it it causing fatal error on my windows. I have all suite up to date. please advice.
-
I took some pictures and a movie on my iphone sync to iTune but it not there to see it back on the phone
-
hi sir/madam, i have a problem with execute_query...ENTER_QUERY is working fine...But EXECUTE_QUERY not giving any response...the code written for both are given below... first trigger go_block(<block name); enter_query; second trigger go_block(<bloc
-
Lines crossed: My daughters Ipod music etc is now on my Ipod
After (I though) backing up my Ipod on my daughters laptop computer and restoring it, I have learned my Ipod now bears HER Apple ID. How do I get my Apple ID back as well as my music?