Transfer rate when moving larger files with MBP +AEBS over 802.11 n

Hi Everyone
I´m very confused about the capabilites of the new AEBS dual band.
I have a Macbook Pro C2D 2,4ghz late 2007 running Snow Leopard , with an airport card N compatible.
Recently i add to my home network an AEBS dual band , and i configure it in bridge mode , with support to the N and G nets.
So when i try to copy a big file (around 2 GB) between the MBP and a FS mounted via NFS, sometime i have transfer rates about 9 to 12 MBytes / s , but after this al the copy´s that y do slow down to 3,4 MBytes / s.
Also i test this copy operation with a 2,5" USB connected directly to the AEBS, and the results are the same , the max rate transfer is 3,4 MBytes /s.
I tried with various radio modes , and different locations (Ireland, etc...) due to the limitation in Spain to use the 5ghz band.
If i look the properties of the connection with de alt button it shows me that the MBP is connected to the N network at 5Ghz and 300 Mbits /s , but the transfers only reach 3,4 Mbytes /s. When i have a G net the transfers reach 2,4 Mbytes / s , i think that i have an limitation in my airport card or a misconfiguration in the AEBS.
Sorry for my English.
Thanks in advance.
Nacho López.

Hi Paul,
The last test is....crazy.
The environment (my home) are the next:
AEBS dual band
MBP connected via wifi N (5ghz)
An old box with ubuntu server 8.10 (Pentium4) with a SATA drive
External USB 2,5" connected directly to the old box via usb.
I perform 2 test , a copy to the SATA drive of the old box, and another copy to the external USB mounted on the old box in the directory /opt/COMPARTIDO/usb.
Here are the results of a scp :
-----COPY TO THE MOUNTED USB-----------------
batman-3:Movies Nacho$ scp -r Ironman\ P1\ \[1080p\]\[AC3\].avi [email protected]:/opt/COMPARTIDO/usb
[email protected]'s password:
[email protected]'s password:
Ironman P1 [1080p][AC3].avi 100% 3334MB 19.6MB/s 02:50
-------19.6MB/S TO MOVE 3,3GB OF DATA IN 02:50--------------
-------COPY FROM MBP TO THE SATA DRIVE OF THE OLD BOX------------------
batman-3:Movies Nacho$ scp -r Ironman\ P1\ \[1080p\]\[AC3\].avi [email protected]:/opt/COMPARTIDO/Mldonkey/incoming/directories
[email protected]'s password:
Ironman P1 [1080p][AC3].avi 100% 3334MB 15.7MB/s 03:33
-------15.7MB/s------------------------------------------------------
So definitly mi issue is not related to wifi N or the performance of my disks. I suspect that maybe the AEBS don´t manage well the protocols like SAMBA (the external usb drive was poor perfomance shared via AEBS) or NFS (the directory shared from the old box also has the same poor perfomance).
If you can, try it, a simple unix scp can makes fly your files over your network.
I´ll continue posting what if discover about this.
Regards,
Nacho.

Similar Messages

  • Labview 2009 SP1 crashes when moving large selection with arrow key

    If I select a lot (10 or 15) of Block Diagram components and try to move them some distance with the arrow key, I will frequently get a program crash.  Since a smaller number of components seems to crash after a longer travel distance, it looks like some kind of buffer overflow error.  I do not see this problem when using the mouse to move selections.
    I have checked to be sure I have the latest video driver for my NVIDIA Quatro FX570.  I have also tried working with no hardware acceleration and no combined writes.  This is happening on Windows XP SP3 with all the current updates.
    It has become so bad that I have to do a Save As every fifteen minutes to keep from losing data.
    Why don't I use my mouse for all movements?  Because it is not as accurate and not so easy to restrict to one dimension of movement.   My hand is not as steady as it once was.
    I hoping someone will have a suggestion that will clear up this problem.
    Solved!
    Go to Solution.

    As I indicated, I had the same problem with 8.5 and just DID a new installation of Labview 2009.
    Since it is possible my three-monitor setup, which obviously requires more video memory, may be at the root of the problem, I am satisfied with the workaround of dragging the objects near their final destination and then using the arrow keys.  
    Three monitors are ideal for front panel, block diagram and Help/Internet/Probe Window.  When I had to work in the field with only one monitor, I felt severely handicapped.
    You may consider the matter closed.
    Thanks for attempting to duplicate the failure.

  • Bridge CS3 now crashes when moving/copying files

    As the title says.
    A few days ago Bridge started freezing and I dumped the preference files from the user Library, the computer's Library and also the one in the "Save preferences" folder. Now it's giving me problems when moving/copying files with the 'Move to" and "Copy to" commands on the File menu. It works fine when I use one of the options on the "Recent Folders" list, but when I want to select a folder using the "Choose Folder" option, it just crashes.

    Hi Robert,
    I'm a developer from Br team. Thanks for reporting Br. problems.
    It seems like a memory issue. Please try this to help us identify the root cause:
    1. Disable all startup scripts (Edit->Preferences->Startup Scripts->Disable All), then restart Br.
    2. When Br is running, kill "SwitchBoard" process in task manager.
    3. When do Copy&Move operations, don't use Drag&Drop, try to use "Move To / Copy To" menu. (A known issue of Bridge, should be fixed in later versions)
    Does the crash still happens?
    Thanks very much!

  • I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library.  However, when I plug in my iPod it says it is already synced with another iTunes Library.

    I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library.  However, when I plug in my iPod it says it is already synced with another iTunes Library. 
    I don't see anything in Help that shows when you already have transfered all the files over.  Why would it want to erase and sync when I already have all the music folder copied over?  I didn't have an issue when I had another technician copy from one laptop to another.  Home sharing is also on but not being recognized.

    I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
    tt2

  • Reading large file with JCA Adapter in OSB

    Hello,
    We are searching for a solution how to read large file (>50M) from network drive and deliver it to queue via OSB 11gR4 (10.3.4). The problem is when reading the file with JCA File Adapter. It seems that it cannot handle as large files as we have. The documentation provides a way to bypass file size limitation by using Chunk Read but it seems to require BPEL Process execution which is not possible in our environment. Does anyone know if there are ways to implement this without having BPEL Process?
    Our usecase:
    read file from network drive -> transfer with OSB -> deliver MQ
    Other options than JCA File Adapter can be considered, if anyone can advice...

    If it's a plain routing use case and no message processing is required then you may simply use OSB's FILE transport instead of JCA adapter. Create a messaging type proxy service and select request message type as "binary". Also enable the content streaming (Disk buffer, compression).
    From OSB Dev guide -
    Oracle JCA Adapter for FTP and Files – Attachments (large payload support), pre- and post-processing of files, using a re-entrant valve for processing ZIP files, content streaming, and file chunked read are not supported with Oracle Service Bus.
    http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/jca.htm#BABBICIA
    You may also refer -
    Reading huge flat file in OSB 11gR1
    Regards,
    Anuj

  • Error code 36 when moving big files

    getting error code 36 when moving big files from my mbp (10.6.8) to my external hard drive. have tried using the sudo command in terminal, but it doesnt work. what do i do?

    sorry about that
    I'm moving movie files around 800mb++ to HFS+ and NTFS formatted drives. no problems when using the NTFS drives with other computers but i cant really test the HFS drive on another computer since im the only one with a mac.
    I've tried:
    sudo cp /source/folder /destination/folder
    but to no avail.

  • I recently switched from PC to Mac and am able to find and transfer most of the larger files of music to iTunes, but there are about 750 songs that are held in sub-files that require me to dig in and transfer them one by one to iTunes.. I've tried transfe

    I recently switched from PC to Mac and am able to find and transfer most of the larger files of music to iTunes, but there are about 750 songs that are held in sub-files that require me to dig in and transfer them one by one to iTunes.. I've tried transferring the parent folders, but it doesn't seem to work.  Does anyone know of a more efficient way of getting iTunes to dig into the subfolders and transfer the music without me having to go one by one?

    There is a good general guide to switching from Windows to Mac at the following link that touches on moving music as well How to Move to a Mac - Get your stuff from your PC to your new Mac
    There are also these guides:
    How to move music between authorised computers
    Networking with a Windows PC
    Don't forget to deauthorise your old PC if you are disposing of it so you don't use up your 5 allowances: About iTunes Music Store Authorisation and Deauthorisation

  • I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

    I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

    Do some testing to get your method working right with some less than important footage.
    Copy/paste files where you want then.
    Use the FCE Reconnect feature to tell FCE where the newly copied files reside.
    Make sure the new location and files are working as expected with your Projects.
    Delete the original files if no longer required.
    Al

  • TS1368 when downloading large files such as videos of television season do you need to turn off autolock to prevent download from halting

    when downloading large files such as videos of a television season do you need to turn off autolock to prevent download from halting? And if so, if the download will take a significant amount of time (not sure how much offhand) how do you prevent burn in from prolonged screen image?

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder.  Why?

    When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder.  Why?  I have a heirarchical embedded folder structure under \Documents.  Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder).  Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file.  If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved.  This just started happening.  I noticed it after upgrading to Mavericks.  Is this a bug or could anything else be causing this?

    As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system.  It is isolated to "Column View"; the Icon and List views in Finder behave correctly.  Issue is being escalated to engineering, and Apple will call to report status in a couple days.  In all likelihood, this is a bug that will need to be addressed in a future update.

  • Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick?

    Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
    Background / other symptoms:
    The Flash drive in question has been formatted HFS.
    I get no error messages, including on the Console, and no sound indicators.
    I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
    Finder copying on this stick works just fine on my other Mac.
    I can move files within another (FAT32-formatted) USB flash drive.
    The quirky USB HFS Flash drive works fine on my other Mac.
    Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
    If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.

    Why does the Yosemite Finder become unresponsive when moving a file within my USB Flash stick? I have to Relaunch the Finder to get it working again.
    Background / other symptoms:
    The Flash drive in question has been formatted HFS.
    I get no error messages, including on the Console, and no sound indicators.
    I can copy files, using the Finder, from a hard-drive to the usb flash drive with no problem.
    Finder copying on this stick works just fine on my other Mac.
    I can move files within another (FAT32-formatted) USB flash drive.
    The quirky USB HFS Flash drive works fine on my other Mac.
    Outside of the Finder, I can use mv just fine to move the files on the HFS flash drive.
    If the HFS-formatted Flash drive were faulty, I would at least expect some sort of error in the Console app, but perhaps not from the Finder.

  • Please a solution against crashes when opening a file with Acrobat XI pro?

    Hello,
    Am a member of Adobe Creative Cloud.
    Am also constantly having crashes when opening a file with Acrobat XI pro.
    Am running on Windows 7 Home Premium, Service Pack 1, 64 bit - RAM 20 GB -
    The crash happens systematically after the installation of the update. Within one day I uninstalled and reinstalled the program 4x! It takes of a lot of my time.... Thank you for providing a definitive solution!
    Best regards

    I've been having the same issue!  I try to open it and it crashes - says re-open, it crashes...  I re-installed it yesterday and it opened and worked fine.  Closed it out at the end of the day thinking everything was finally fine but this morning the same crashes it had yesterday...  HELP!!!

  • Large file with fstream with WS6U2

    I can't read large file (>2GB) with the stl fstream. Can anyone do this or is this a limitation of WS6U2 fstream classes. I can read large files with low level function C functions

    I thought that WS6U2 meant Forte 6 Update 2. As to more information, the OS is SunOS 5.8, the file system is NFS mounted from an HP-UX 11.00 box and it's largefile enabled. my belief is that fstream does not implement access to large files, but I can't be sure.
    Anyway, I'm not sure by what you mean by the access to the OS support for largefiles by the compiler, but as I mentioned before, I can read more then 2GB with open() and read(). My problem is with fstream. My belief is that fstream must be largefile enabled. Any idea?

  • I am trying to send a large file and it takes over 15 hours and still doesnt send the complete file

    I am sending a large file over the internet to Graphistudio. When i try and send the file it tells me it is going to take 19 hours. when i have sent these files in the past it has never taken this long. when it does finish sending it doesnt even send all the file and bits are missing.

    What method or app are you using to send the "large" file with?  Emails, for instance are often limited to 35 or 40 MB's maximum size by the ISP provider.  You would need to use an FTP setup to send a larger file.   And what is the size of the file in MB's or GB's?  You might check out the following free FTP Apps for Mac:
           http://mac.appstorm.net/roundups/internet-roundup/top-7-free-ftp-clients-for-mac /

  • Can't transfer large files with remote connection

    Hi all,
    I'm trying to figure out why we can't transfer large files (< 20MB) over a remote connection.
    The remote machine is a G5 running 10.4.11, the files reside on a Mac OS X SATA RAID. We are logged into the remote machine via afp with an administrator's account.
    We can transfer files smaller than 20 MB with no problem. When we attempt to transfer files larger than 20 MB, we get the "The operation can't be completed because you don't have sufficient permissions for some of the items."
    We can transfer large files from the remote machine to this one (a Mac Pro running 10.4.11) no problem.
    The console log reports the following error:
    NAT Port Mapping (LLQ event port.): timeout
    I'm over my head on this one - does anyone have any ideas?
    Thanks,
    David

    I tried both these things with no luck.
    The mDNSResponder starts up right after the force quit - is this right?
    The following is the console log, which differs from the previous logs where we had the same problem:
    DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb4f70 and its source is FOUND
    DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb3990 and its source is FOUND
    DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb2b80 and its source is FOUND
    DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb1270 and its source is FOUND
    Feb 4 06:13:57 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[951]: starting
    Feb 4 06:13:58 Russia mDNSResponder: Adding browse domain local.
    In HrOamApplicationGetCommandBars
    In HrOamApplicationGetCommandBars
    In HrOamApplicationGetCommandBars
    Feb 4 06:23:12 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[970]: starting
    Feb 4 06:23:13 Russia mDNSResponder: Adding browse domain local.
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
    [442] http://discussions.apple.com/resources/merge line 4046: ReferenceError: Can't find variable: tinyMCE
    Thanks,
    David

Maybe you are looking for

  • Call RFC Function Module and return 1000 records at a time

    I would like to call a Remote Enabled Function Module from a non SAP system.  This function module will select data from the database and return it to the calling program. Suppose there are 100,000 records that need to be returned, but the calling mo

  • Error when submitting podcast: We had difficulty reading this feed. host parameter is null

    I'm attempting to submit a podcast through iTunes and keep getting this error. I've tried on two computers, one being a Mac and one PC. My RSS feed is here: http://www.whitewolfdental.com/wp-content/media/rss.xml If I go to File -> Subscribe to Podca

  • SENDING EMAIL USING ORACLE9i CLIENT/SERVER

    I HAVE DOWNLOADED 2 UTILITY LIBRARIES D2KCOMN and D2KWUTIL TO MY COMPUTER. THESE 2 LIBRARIES ARE COPIED TO AN ORACLE FORM. ON THE FORM, THERS IS A BUTTON. IN THE WHEN-BUTTON-PRESSED-TRIGGER, I HAVE CODED WIN_API_SHELL.WINEXEC('"C:\PROGRAM FILES\MICRO

  • Partial Payment Tab via T-code F-30

    Good Morning SAP Guru's, I am stuck on a problem here.  I have two co.codes and on the one company code, when you use the partial payment tab when using F-30, it gives me the appropriate post key of 06 or 16 however under another co.code, it gives me

  • To Do's

    Hi everyone, new iPhone user here. Is there anyway to sync the To Do's in my mac mail application to my iPhone 3gs? My notes sync with it but I don't know about the to do's. Thanks