Transfer reports from Crystal Enterprise 9 to Crystal Reports server 2008

Hello,
a decision was made to stand up our new Crystal Reports Server 2008 box and only load new reports to it that were created in Crystal Reports 2008, or ones that were modified in CR 2008.
Now I have all of my users set up and some reports loaded on the new server. There has been a new decision to now move a couple hundred reports off the old server onto the new and also have the same folder structure and schedules as exists on the old CR 9 server.
Is there an export/import tool that will allow for this?

Hi,
i`m not quite sure if you can do this from CRE9 to CRS2008 with the Import Wizard. I think its only supported beginning with CE10.
Check the Import Wizard Guide from:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_importwiz_en.pdf
Regards
-Seb.

Similar Messages

  • MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition

    Hello Team, 
    Is there any issue/conflicts/limitationn to install MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition. 
    OR their is nothing to worry about it I guess their is memory limitation between both of them. Please suggest
     Regards
    Naveed Amir

    Hi,
    Here you can find the officially Hardware and Software Requirements for SQL Server 2008 R2:
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
    There should be NO problem as much as I know if the basic limitation fit you (as shanky mentioned).
    I had (an clients still have) several servers with Windows Server 2008 R2 Standard & SQL
    Server 2008 R2 Enterprise and Standard with no problem (today I have one old developing server with this exact installations work great for several years).
    [Personal Site] [Blog] [Facebook]

  • RUNNIG CRYSTAL REPORTS FROM ORACLE FORMS (for oracle report team too)

    I WANT TO RUN CRYSTAL REPORT FROM THE ORACE FORMS 6i how can i
    run this if any one has syntax or any detail please send me
    or reply
    thanks

    Ask the Crystal support forum how do you invoke their tool from
    a command line.
    You can then use host command from forms.
    You can also try and find out if they have an OLE2 interface and
    then work with the OLE2 package in forms.

  • Can Connect but Not Open Reports from BusinessObjects Enterprise

    I have a new installation of Crystal 2008.  I can logon to the Respository Explorer, but when I try to access a report, I receive the folllowing message:
    ================================================================
    The report could not be opened from BusinessObjects Enterprise.
    Possibly the report is on a different BusinessObjects Enterprise system than the one you are currently logged onto.  If this problem persists, please contact your admistrator.
    ================================================================
    The server administrator has tried his profile and gets the same message
    I installed CR2008 on a different PC and can access without problems
    I had Crystal XIR2 installed and uninstalled it prior to CR2008
    I also had Crystal Beta for VS2020 that I uniinstalled prior to installing CR2008.
    I've tried suspending my virus protection and firewall
    It doesn't seem to be a secuity issue, but something is blocking access.  I assumed the problem would go away after uninstalling the other versions of crystal and running a registry cleaner, but I still have the same problem.
    Any Suggestions??

    Hi,
    One of the probable causes of this error message is when the Input File Repository Server (FRS) is stopped, disabled, or is not accessible over the network.
    In addition to what Philip has recommended, i would suggest you to first verify if your IFRS server is started and enabled. Also, kindly perform the port binding for the IFRS server by:
    1. Login to CMC with an Administrator account.
    2. Navigate to Servers >> Input File Repository Server >> Properties
    3. Check the Request Port button and assign a port number.
    4. Also assign the IP Address of the Server in IP Address radio button.
    5. Restart the server and test the issue.
    I hope it works for you.
    Regards,
    Nakul Mehta

  • Can you drill to an xmlp report from a query or xlmp report?

    Within PeopleSoft Financials 9.1 (people tools 8.51) is it possible to create an expression to drill down to an xmlp report?
    I have two reports, summary and detail. Each report has its own source query. Within the summary query I added a drilling url expression to drill to the detail query and pass values to run the detail query. I would like to add a second url to drill to the xmlp report . I tried doing this by using the “component url”. This only gets me to the “query report viewer” page. I can’t get it to open up the detail report. Is there a way to add the drilling url in my query or directly to the RTF report so that the detail report can be drilled to directly from the summary report? Can it pass parameters from the summary report?
    Thanks,
    Raquel

    Within PeopleSoft Financials 9.1 (people tools 8.51) is it possible to create an expression to drill down to an xmlp report?
    I have two reports, summary and detail. Each report has its own source query. Within the summary query I added a drilling url expression to drill to the detail query and pass values to run the detail query. I would like to add a second url to drill to the xmlp report . I tried doing this by using the “component url”. This only gets me to the “query report viewer” page. I can’t get it to open up the detail report. Is there a way to add the drilling url in my query or directly to the RTF report so that the detail report can be drilled to directly from the summary report? Can it pass parameters from the summary report?
    Thanks,
    Raquel

  • How to add results to report from sequence call disabled in report options ?

    Hello,
    I need to add text to report from a sequence called by a sequence call. The record results option for the sequence call is disabled because the sequence call is normally done thousands of times. Therefore, I don't want to fill in useless text in the report. But, if a certain condition in called sequence fulfills, I would put a text into the report. (Yes, this is related to a sporadic communication problem with the instrument which I want to record into the report.) Which options I have ?
    I have attached an example which doesn't add the text from the sequence to the report.
    Regards,
    Petri
    Attachments:
    report test.seq ‏45 KB

    Hello Ray,
    I encounter same behaviour with NONE adapter action step with post-expression as with a statement step as in my first example. With other words, if record results in sequence call in mainsequence is disabled, I cannot get any records into the report.
    Attached a modified sequence using NONE adapter action.
    Regards,
    Petri
    Attachments:
    report test.seq ‏53 KB

  • Running Oracle Reports from JSF Application in Websphere Application Server

    Hi everybody;
    in our company we are developing jsf applications and we want to use our existing Oracle reports. Reports are deployed in Oracle Application Server 10G. Is there a way to call those reports from our jsf applications deployed in websphere application server.

    Calling reports is just constructing and submitting a URL. So constuct the url in your jsf app or create static hyperlinks in your jsf app to go to the needed url. The url should look something like:
    http ://hostname:7777/reports/rwservlet?report=myrep.jsp&userid=scott/tiger@dev10g&desformat=html&destype=cache

  • Configure SSO Connection from SAP Enterprise Portal to BOE Server

    Hi Guys,
    We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
    SAP EP with AD Authentication
    SAP EP configured with SNC to SAP BI7 system
    SAP BOE XI 3.1 - SAP Integration Kit
    BOE Server configured with SAP Authentication via SAP BI7 System
    We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
    Let me know if this is at all possible

    Hi,
    You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
    If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
    For more details check BOXI Admin guide and SAP Integration Guide.
    Thanks,
    Muhammad

  • Simple way to export a report to PDF on demand in CR Server 2008?

    Hi,
    I have this intranet application written in JavaScript with smidgens of c# that I'm modifying for a client.  They've decided to purchase Crystal Server 2008 and they want their application to call Crystal Server 2008 and export a report to PDF to a folder on the intranet server.
    I've been beating my head against the wall trying to find a simple way to do this but I'm coming up blank.  Maybe my approach is wrong. 
    I've tried the .Net SDK (wssdk_net_samples_12) and apparently it's doesn't work... exactly.  I've been told they're going to get a working SDK for .Net > Crystal Server 2008 before the end of September(they hope).
    I've tried the URL reporting and it almost does what I'm looking for.  I can call a report directly using the URL... unfortunately it's wrapped in an HTML file and I can't figure out how to get just the PDF out of it.
    Does anyone know how I can do this? 
    I'm just looking to send some info to the Crystal Server 2008 and have it send back a PDF.
    Thanks in advance,
    J

    Hi Jason,
    This question might be better addressed on the .NET forum:
    .NET SDK Application Development
    -or-
    SAP Crystal Reports, version for Visual Studio
    I recommend that you post this question on that forum.
    Regards,
    Dan

  • Where can I download the Crystal Run Time for Windows Server 2008 64 bit ?

    Hi,
    Where can I download the Crystal Reports 08 RunTime for Windows Server 2008 64 bit ?
    Rock
    Edited by: Rock_1234 on Aug 5, 2009 9:25 AM

    Thanks all for your replys.
    As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
    Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
    ' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
    When will be 64 bit runtimes for CR 08 will be available?
    Thanks

  • Transfer data from 2 oracle version to sql server 2005

    Hi,
    I have two database servers on different machines. They are
    1) Oracle 8.1.7.4
    2) Oracle 7.3.1.4
    I have to create agents which can transfer tables from these two databases to one machine having sql server 2005 database.
    Please tell me what are the options. What drivers i need to install on machine having sql server 2005 so that i can transfer data from both oracle versions.
    Thanks
    Rajneesh.

    You could create a linked server. Install the Oracle client on the server with SQL Server 2005, setup the TNS to your Oracle databases, create the linked server and then grab the data that way. There are migration tools as well but if the database is small in size I found linked servers to work and give me better control over the migration. This assumes that the database is not very large. If it is really large a migration tool might be a better option.

  • XL reporter error   SB1 Patch level 11 on server 2008

    Good Morning Everyone,
    XL reporter error on patch level 11, server 2008:
    Unable to connect to XL Reporter
    Error!  Server communication failed:
    Cause: Error! Unable to get document! Type: 36
    Cause: Application-defined or object-defined error
    I have referred to the note 1304722( upgrade to P47), but is there any work around?

    Dear Gordon,
    No I am not. I do know there is a fix on Patch 47, but I wanted to know if there was a work around. They will be upgrading to 8.8, but for now I though maybe someone had a solution for a work around.

  • Reports quit working after upgrade to SQL Server 2008

    Folks,
    I'm running Visual Studio 2008 (sp1) and recently upgraded to SQL Server 2008. Reports worked fine until after upgrade. Now I get the "Login Failed" error message.
    Here is code snippets:
            CrystalDecisions.CrystalReports.Engine.ReportDocument oReport = new   CrystalDecisions.CrystalReports.Engine.ReportDocument();
            TableLogOnInfo LonOnInfo = new TableLogOnInfo();
            TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
            TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
            private Tables crTables;
            private Table crTable;
            ConnectionInfo crConnectionInfo = new ConnectionInfo();
                crConnectionInfo.IntegratedSecurity = true;
                crConnectionInfo.ServerName = Properties.Settings.Default.InstanceName + "
    Instance";
                crConnectionInfo.DatabaseName = "DATABASE";
                crTables = oReport.Database.Tables;
                for (int i = 0; i < crTables.Count; i++)
                    crTable = crTables<i>;
                    crtableLogoninfo = crTable.LogOnInfo;
                    crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                    crTable.ApplyLogOnInfo(crtableLogoninfo);
                oReport.RecordSelectionFormula = xFormula;
                crystalReportViewer1.ReportSource = oReport;
    Has anyone had this problem? Any help would be appreciated.
    Terry

    CR 2008 does not support MS SQL 2008 yet, meaning we have not had time to test it completely and add it to our supported platforms.txt file.
    One thing I noticed is you are using trusted authenication:
    crConnectionInfo.IntegratedSecurity = true;
    Make sure you give access to all users, MS changed the security properties a lot since SQL 2005 and you can't simply log into any database now. If you have a DBA check with that person on how to configure NT Authentication or the Help file. You can also do a quick test and simply use MS SQL Server authentication to confirm if it's a user permission issue.
    Try creating a report that doesn't use Integrated Security, check the box off on your data logon prompt in the Designer.

  • Printing from OSX Lion Client to Windows Server 2008

    I have tried these methods:
    =============
    via System Preferences
    IP Printer (Line Printer Daemon - LPD)
    Address (both Server Name and IP Address)
    e.g.  lpd://servername/queue
    Queue
    Print Using (HP LaserJet P4010 Series)
    Result:  
    After a test print is sent, the print queue dialog reads:
    Processing Job.
    Copying Print Data.
    Connecting to Printer.
    Paused - "/usr/libexec/cups/backend/lpd failed"
    **** I have also tried using the hostname in place of the IP address
    I get something to the effect of:
    D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Pre-processing tasks:
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Post-processing tasks:
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Read 8170 bytes of print data...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Wrote 8170 bytes of print data...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to 10.157.32.92:515 for printer DOBL_24HR1
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to printer.
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connecting to printer.", current level=INFO
    D [10/Nov/2011:12:24:35 -0500] [Job 27] STATE: -connecting-to-device
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to printer.
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connected to printer.", current level=INFO
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to 10.157.32.92:515 (local port 1009)...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command 02 DOBL_24HR1
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Sending command string (12 bytes)...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Reading command status...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command returning 1
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Backend returned status 1 (failed)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Printer stopped due to backend errors; please consult the error_log file for details.
    D [10/Nov/2011:12:24:35 -0500] [Job 27] End of messages
    D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state=5(stopped)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-message="/usr/libexec/cups/backend/lpd failed"
    D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-reasons=paused
    =============
    via System PreferencesWindows *navigated to the server (e.g. smb://servername/printer/) with the browser.
    Result:
    After a test print is sent, i login to the dialog box with:
    DOMAIN\USERNAME
    PASSWORD
    (*) Remember this password in my keychain
    Status - On Hold (Authentication Required)
    **** I have also tried various formats for the username here:
    DOMAIN\USERNAME & password
    USERNAME & password
    SERVER\USERNAME & password
    Here's the Log output:
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Queued on "DOBL_24HR1" by "lab".
    D [10/Nov/2011:12:26:21 -0500] [Job 28] job-sheets=none,none
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[0]="DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[1]="28"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[2]="lab"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[3]="testprint"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[4]="1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=3671 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:ad3091e2-399a-3964-4c78-b8a81bf25bdf job-originating-host-name=localhost time-at-creation=1320945980 time-at-processing=1320945980 PageSize=Letter"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[6]="/private/var/spool/cups/d00028-001"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[0]="<CFProcessPath>"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[11]="[email protected]"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[12]="SOFTWARE=CUPS/1.5.0"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[14]="USER=root"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[17]="IPP_PORT=631"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[18]="CHARSET=utf-8"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[19]="LANG=en_US.UTF-8"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[20]="APPLE_LANGUAGE=en-US"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[21]="PPD=/private/etc/cups/ppd/DOBL_24HR1.ppd"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[22]="RIP_MAX_CACHE=128m"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[23]="CONTENT_TYPE=application/vnd.cups-banner"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[24]="DEVICE_URI=smb://utlab-prsrv-02/DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[25]="PRINTER_INFO=DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[26]="PRINTER_LOCATION="
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[27]="PRINTER=DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[28]="PRINTER_STATE_REASONS=none"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[29]="CUPS_FILETYPE=document"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[30]="FINAL_CONTENT_TYPE=printer/DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[31]="AUTH_I****"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[32]="AUTH_U****"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[33]="AUTH_P****"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 7646)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgpdftops (PID 7647)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/pstops (PID 7648)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 7649)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started backend /usr/libexec/cups/backend/smb (PID 7650)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started smb backend (PID 7653)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] STATE: +connecting-to-device
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Connecting to printer...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Connecting to printer...", current level=INFO
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Looking up "utlab-prsrv-02"...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Authentication required", current level=ERROR
    D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend (PID=7653) stopped with status 512
    D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend will exit with status 2
    D [10/Nov/2011:12:26:21 -0500] [Job 28] load_banner(filename="/private/var/spool/cups/d00028-001")
    D [10/Nov/2011:12:26:21 -0500] [Job 28] hpPostProcessing launched
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - copying to temp print file "/private/var/spool/cups/tmp/01ddf4ecb23b2"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Final document orientation - 0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Setting language to en-US
    D [10/Nov/2011:12:26:21 -0500] [Job 28] EWU support is absent for device.
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Pages per sheet - 1
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Orientation - portrait
    D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Pre-processing tasks:
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%EndComments     Processor - DriverVersion     "Insert driver info"     (pre, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Post-processing tasks:
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Allowing document iterator to handle job termination...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Using line-by-line file iteration...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - using PPD file "/private/etc/cups/ppd/DOBL_24HR1.ppd"...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PS Matching Mode = AP_ApplicationColorMatching
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - documentMediaBox.size.width = 612, documentMediaBox.size.height = 792
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
    D [10/Nov/2011:12:26:21 -0500] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_comments - %!PS-Adobe-3.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %!PS-Adobe-3.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %APL_DSC_Encoding: UTF8
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Title: (testprint)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Creator: (cgpdftops CUPS filter)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%CreationDate: (Thursday, November 10 2011 12:26:21 EST)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%For: (lab)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%DocumentData: Clean7Bit
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%LanguageLevel: 3
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Pages: 1
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%BoundingBox: (atend)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%PageOrder: Ascend
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%EndComments
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_prolog - userdict/dscInfo 5 dict dup begin
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_setup - %%BeginSetup
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before page loop - %%Page: 1 1
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Copying page 1...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] pagew = 588.0, pagel = 768.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PageLeft = 12.0, PageRight = 600.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PageTop = 780.0, PageBottom = 12.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PageWidth = 612.0, PageLength = 792.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor DriverVersion before line %%EndComments
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Received SIGPIPE
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Wrote 1 pages...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Backend returned status 2 (authentication required)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Job held for authentication.
    D [10/Nov/2011:12:26:21 -0500] [Job 28] End of messages
    D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state=3(idle)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-message="Authentication required"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-reasons=none
    ==============
    via CUPS (localhost:631)here is the syntax of my printer addresses:
    SAMBA--
    smb://username:password@serverhost/printer
    smb://username:password@serverip/printer
    smb://serverhost/printer
    smb://serverip/printer
    I get something like...
    "/usr/libexec/cups/backend/smb failed"
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_comments - %!PS-Adobe-3.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %!PS-Adobe-3.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %APL_DSC_Encoding: UTF8
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Title: (testprint)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Creator: (cgpdftops CUPS filter)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%CreationDate: (Thursday, November 10 2011 12:39:00 EST)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%For: (lab)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%DocumentData: Clean7Bit
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%LanguageLevel: 3
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Pages: 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%BoundingBox: (atend)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%PageOrder: Ascend
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%EndComments
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_prolog - userdict/dscInfo 5 dict dup begin
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_setup - %%BeginSetup
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before page loop - %%Page: 1 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Copying page 1...
    D [10/Nov/2011:12:39:00 -0500] [Job 29] pagew = 588.0, pagel = 768.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PageLeft = 12.0, PageRight = 600.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PageTop = 780.0, PageBottom = 12.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PageWidth = 612.0, PageLength = 792.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor DriverVersion before line %%EndComments
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Current page number is 0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor PageAccounting after line %%Page: 1 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PAGE: 1 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
    D [10/Nov/2011:12:39:00 -0500] [Job 29] ATTR: auth-info-required=username,password
    D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend (PID=8517) stopped with status 512
    D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend will exit with status 2
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Received SIGPIPE
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Wrote 1 pages...
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Backend returned status 2 (authentication required)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Job held for authentication.
    D [10/Nov/2011:12:39:00 -0500] [Job 29] End of messages
    D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state=3(idle)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-message="Authentication required"
    D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-reasons=none
    =================
    So yeah...
    I'm totally stumped now.
    I feel like I've tried every method imaginable, but still no luck.
    Printing from OSX 10.6.8 works just FINE.
    On the server side, I'm running Windows Server 2008... there's only a local admin and a local user account.
    Clients running OSX Lion 10.7.2 -- All updated.
    Printer is an HP LaserJet P4010-4510 series.
    Workstation is an iMac 21.5-inch, Late 2009
    3.06 Ghz Intel Core 2 Duo
    Please help!!!
    --- Richard

    LPD print service is not enabled by default in Server 2008. It can be enabled via the Print Serveer role, but I am remote and cannot confirm the exact setting.
    As for SMB, the error log is showing;
    Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/"
    So it would suggest that there is still an issue with the account detail you are using as you show you have tried this syntax at one stage. If you want to continue to create the queue using SMB rather than LPD then I recommend using the CUPS web page (http://127.0.01:631) to create the queue. This will allow you to enter the syntax exactly as the error message shows. From previous testing I found it was okay to just use the account name rather than domain/account name on a domain bound server.

  • Import into SQL Server db from Sybase 7 data source - SQL Server 2008 R2/2012

    Hi,
    I need to import Sybase 7 data into a SQL Server 2008 R2 or 2012 database.
    Has anyone any experiences about this import?
    Thanks

    The nuance is in basically setting your connection manager right.
    If I remember correctly, I did that using the ODBC/ADO, but I do not remember the Sybase version.
    I suggest you visit a post dedicated to this operation (the author chose to use the ADO.NET type of a provider):
    http://msbimentalist.wordpress.com/2013/11/01/import-and-export-from-sql-server-to-sybase-db-using-ssis/ 
    Arthur My Blog

  • Migrate P6 Pro Rel7 DB from Oracle 10g Express to SQL server 2008

    Please advise the steps needed to migrate my P6 Professional Rel7 (laptop) Oracle 10g Express to P6 Enterprise Rel7 (server) migrating over to SQL server 2008.
    I don't want to lose any of my activity codes during the migration.
    Thanks in advance for any comments or guidance.
    CH

    You can use migrate.bat (Media folder/database/installation). Enter the details of the source (oracle db) to destiny (SQL) . The app will migrate everything, the projects, activities, uds, users, filters, layouts, etc.. .
    Regards,
    Pablo

Maybe you are looking for