Transfer Request for the movement type 103

Dear Experts,
We are creating Batch and we are receiving the batches against movment typ 101. in the sane time material is comming to WM through 103 movement type.
Against 103 mov. type one TR will create. but in our case while doing stock transfer from storage type 901 [GR for Production] to 001[FG Stock] we are directly using LT10 transaction, If we do the stock trasfer here it will not ask TR No againt which TO has to be cleared.
Now I have observed in LB11 [TR display] since last year all TR are appearing in the list. Is there any harm in our process since we have not done TO against TR.
Please suggest how to come out from this situation.
Thanks in Adavance.

Old TRs won't cause any problem. You can eliminate them in LB02 > (menu) > Edit > Set Final Delivery.
If you want to eliminate TR creation for GR, you have to carry out you settings in SPRO > LE > WM > Interfaces > IM > Define Movement Types - here choose LE-WM interface and remove the TR creation indicator from V_T321-TBFKZ of the relevant WM-mvt record.
However, if you have TR and process it to get the TO, you can manually modify the suggestion given by SAP's search strategy. In this case you could use TR insted of manual LT10 process.
Regards,
Csaba

Similar Messages

Quality Inspection for a Movement Type 103 , change batch when doing QA11 .

Hi all,
I activated Quality Inspection for a Movement Type 103 . When do MIGO(GR 103) reference to PO ( include material A, qty 100 PC), it will create insp lot. Material A needs batch management.
1st time use QA11 to post 50 PC to stock, it will create a new batch( or you can select a exist batch ).
2nd time use QA11 to post another 50 PC to stock, it will use the batch 1st time used, and you can't change this batch number .
The question is : how to change batch number at the 2nd time ?
Thanks.

Hi,
Pls. check that how u have configured the new batch number in configuration for goods movement.

Accounting doc for the movement types

hi gurus
i want to know the accounting documents created while we transfer posting the stock in all possible movement types. and also tell me how many accounting documents created per transaction.
regards
Ram
09486627305

go to MB03 and enter the material document no and go inside go for finnancial document there in you can see the acc documents for that material document.
Only one acc document created for each material movement which are subject to account postings.
or try MB51 list of material documents once you run the list there in you can chaeck the FI document for each material document nuber dispalyed in the list.
Regards
Sujoy

Posting the account doc for the movement type 311

Hi Experts,
Can you please brief me about the Accounting doc while using the 311 movement type. if there is involve the split valutation in internal purpose or external purpose.
Regards

nilupriya wrote:
Hi Experts,
>
> Can you please brief me about the Accounting doc while using the 311 movement type. if there is involve the split valutation in internal purpose or external purpose.
>
> Regards
Hi Nilu,
See that Mvt 311 is trf betwn st.loc to st.loc, where the goods are not leaving any valuation area, hence there's no value change, which means Accounting Documents are not created as they are not necessary.
Hope its clear
Shiva

Find Material Document with Movement type 103 for material document 105

Hi experts,
In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
Regards,
Abdullah

Hi,
you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
Regards,
Chaitanya

Restriction of Selecting Reason for movement based on the movement type

HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.

Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush

Movement type 103 batch creation.

Hi all
i want the movement type 103 in goods receipt movement types to create batch for the goods receipt, how can i do?
thanks in advance

Go to OMJJ t.code, in details screen you will have option to create new batch. choose the relevent option
Regards
Antony

How to set error message for 541 Movement type

Dear gurus,
            I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
<removed by moderator>
Message was edited by: Jürgen L

Hi,
   The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
   If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
Regards,
AKPT

Reason for Movements for selected movement type in MB1A/B/C

All,
When a user goes to MB1A, MB1B, MB1C and selects a movement type is there a way to show only the reasons for movements for that selected movement type?
Currenlty, when the users clicks F4 or wants to view the options available for reasons for movements, it shows them EVERYONE movement type and its associated reason for movement. The list is HUGE. So, I want to know to shorten the list to show only the applicable ones for the movement type the user has selected.
I know the user can enter the movement type and the list gets filtered but this is a manual step the user must perform. Is there any way the system can restrict the reasons for movements based off the Movement Type already selected by the user?
Please let me know how to show only those reason codes for the selected movement type in transactions MB1A, MB1B, and MB1C.
Thanks for your help in advance!

To shorten the list you can select the movemnt types the user requirs and make his/her personal list so when he.she do f4 onlt personal list will be displaed.
U can create personal list by doing the F4 and put cursor on movement type and below will be icon to add into personal list.after selecting all the movement types. close the window and adain do f4 u will only see the entries of u r personal list.

WM-Error during search for WM movement type (261 )

HI FRIENDS
I HAVE THE ERROR DURING GOODS ISSUE FOR PRODUCTION ORDER...
PLS SUGGEST ME TO SOLVE THIS ISSUE
Error during search for WM movement type (261 )
Message no. L9 005
Diagnosis
A movement type of the Warehouse Management system and certain parameters are assigned to each movement type of the Inventory Management system.
In this case, no movement type of the Warehouse Management system was assigned to the Inventory Management movement type used by the parameters enclosed in parentheses in the error message.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
WIHT REGARDS
DINESH

Hi,
The IM and WM linkage may not be proper for the movement type. Maintain an entry for your warehouse with movement type 261 and Movment Indicator l combination in transaction OMLR. In the "Assign WM Movement Type References to IM Movement Types" section (button), change the "Reference Movement Type WM" to 261 (to match "Reference Mvmt Type" under button LE-WM "Interface to Inventory Management")
And also .....
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location. I hope this will help you. Thanking you.

What is the movement type on stock transfer across company codes

<Deleted original post contents and retypes in capitalized letters - moderator >
What is the movement type at the time of stock transfer between the company codes..
Edited by: Arun Varadarajan on Sep 1, 2008 10:56 PM

HI,
Stock Transport Orders : -
1. Plant to Plant one Step - Transfer Posting using Mvt Type 301
2. Plant to Plant two Step - GI:303 & GR: 305
3. Stock. Transport Order. w/o SD - GI: 351 & GR: 101
4. Stock. Transport Order with SD - GI: 641 & GR: 101
5. Stock. Transport Order with billing - GI: 643 & GR: 101
Refer STO's in the below path for more details
http://help.sap.com/saphelp_47x200/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
Thanks & Regards,
Kiran

Storage Location field mandatory for Movement Type 103

Hi , We are using movement type 103 and 105 to receive material.
Here we want to make storage location mandatory for movement type 103.
How can we do that.
Regards
SHREY

Thx for all yr replies ....
I do agree with yr statements ....
103 doesn't update inventory at storage location level therefore it doesn't make sense to have storage location at the time of 103.
But at our end , we are using 103 for MIGO data entry by store user and 105 for MIGO approval .Store users are the right person who are enter correct storage location to which material should go.Therefore looking for a way thru which store user can enter storage lcoation at the time of 103 only.
Since approvers or purchaser are not very sure about the correct storage lcoation to which material should move therefore storage location at PO level or 105 level will not help me.
Any work around ??
Regards
Shreyh

Use of Movement type 103 for goods confirmation

Hi All,
In SRM, as I understand, It always picks up 101 as Goods Receipt movement type during goods confirmation. But we want to use 103 as movement type instead of 101. Also we want to release from GR blocked stock using movement type 105 from SRM itself. We dont want to go to SAP Backend to release the blocked stock.
SO can you help me with the following:
1. How to change the movement type for GR from 101 to 103.
2. Can the release of blocked stock using 105 can be carried out from SRM?
Regards

hi,
your requirement is not possible in SRM.
In SRM there is no movement type concept .It is only is ECC6.0. Even the movement type 101 is also not appearing in
SRM. In the ECS (Extended Classic Scenario) after confirmation is done in SRM ,the movement type 101 is reflected in ECC6.0
similarly 102 - Return dely can be done in SRM.
But you can try..
Check the program for doing the confirmation in SRM.Try to modify the Program to suit your requirement.
Regards
G.Ganesh Kumar

Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed

SharePoint 2010 -
I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
Export works fine. But during Import, I get the following errors
[ListItem] [Admin] Progress: Importing
[ListItem] [Admin]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Hol plans.xls] Progress: Importing
[ListItem] [Hol plans.xls]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Time.doc] Progress: Importing
[ListItem] [Time.doc]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [AP Docs] Progress: Importing
[ListItem] [AP Docs]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf] Progress: Importing
[ListItem] [Update - June 27th.pdf]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Progress: Import did not complete.
1. Does the console application treated as a Sandbox Solution?
2. Do I need to configure CAS policy in wss_usercode.config? and what?
3. What else could be configured to make this work?
I have tried adding the following in wss_custom_minimaltrust.config but no avail.
<SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
and
<PermissionSet
                    class="NamedPermissionSet"
                    version="1"
                    Name="SPRestricted">
<IPermission
                      class="SqlClientPermission"
                      version="1"
                      Unrestricted="true"
                            />

</PermissionSet>
UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
Regards, Amit Gupta

Hi,
According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
Simple solution is to change the trust the trust level to FULL: <trust   level="[Full]"    originUrl="URL" />
In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
For more information, you can refer to:
http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

Hi Friends,
Request for the permission of type System.Data.SqlClient.SqlClientPermission System.Data Version 1.0.5000.0 Culture neutral .This error is recieving when ever i tried to use the sql connection (with Visual
studio C#) in sharepoint portal installed application.
Please help me if any answers for the issue.

Hi,
Open wss_mediumtrust.config & wss_minimaltrust.config. SharePoint 2013(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\).
Find in wss_mediumtrust.config:
<SecurityClass
Name="SqlClientPermission"
Description="System.Data.SqlClient.SqlClientPermis sion, System.Data,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
Copy and paste it in to the <SecurityClasses> node of wss_minimaltrust.config.
In the PermissionSet section of this configuration file, add the following:
Find in wss_mediumtrust.config:
<IPermission class="SqlClientPermission" version="1" Unrestricted="true"/>
Copy and paste it in to the a <PermissionSet> node of wss_minimaltrust.config.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/en-US/a1c8f2bf-2575-40b4-87f1-4f98462b3234/request-for-the-permission-of-type-systemdatasqlclientsqlclientpermission-systemdata-version?forum=tfssetup
Best Regards
Dennis Guo
TechNet Community Support

Transfer Request for the movement type 103

Similar Messages

Maybe you are looking for