Transfer Requirement for Goods Receipt Item

Hi All,
We are trying to create Transfer Order for Goods Receipt items using an ITS mobile application.We are using the function module L_TO_CREATE_TR to create Transfer Order by passing the Transfer Requirement from the Goods Receipt as an input to the function module. Our requirement is to create one Transfer Orde per Goods Receipt item. We need to create Transfer Order for the items simulatneously from different terminals.Since we have only one Transfer Requirement for the entire Goods Receipt document, we are not able to create Transfer Orders simultaneously because of the system lock (Transfer Requirement is locked).
Is it possible to create separate Transfer Rquirement for the individual items in the Goods Receipt via customizing/User exit.
Your guidance in this regard will be great help for us.
Regards,
Shaju

Hi Dirk,
Thank you for your reply.
Our enduser will be using handheld device for Transfer Order creation. The user will pick the GR item material from one storage type (902) and the Transfer Requirement will be locked at this moment.Later while placing the SU in destination bin the user will scan the destination bin and the Transfer Order will be created at the time of scanning. Till the completion of the entire process the Transfer Requirement will be locked and no one else can pick the materials of the same GR from 902 storage type.
We are trying to create Transfer Requirements for each Goods Receipt Item and we are not able to find any user exit in Goods Receipt Creation or any customizing option.
Can you please check and help us to resolve the same.
Regards,
Shaju
Edited by: shaju tv on Apr 5, 2010 11:40 AM

Similar Messages

No transfer exists for goods receipt reference(From ECC to SNC )

Hi All,
We are facing one issue in ECC and SNC while transferring Goods Reciept Information to SNC via ECC.
We recieved ASN information from SNC and did Goods Reciept against ASN via Inbound delivery.
Now when we used the report RSMIPROACT to transfer Goods Reciept Information it is giving message
"No transfer exists for goods receipt referenc".
I did all setting like
I ticked check box for Goods Reciept Reference and Delivery03.
Source list is maintained and also Message type STPOD is configured for Logical system.
Please can some one help me in telling me why system is not selecting any PO for transfer of GR information even tough Goods Reciept is done for PO.
OR
Is there anyotherway where we can send the Goods Reciept Information from ECC to SNC
Thanks and Regards
Raghavendra Pai

Hi Raghavendra ,
Make sure in We20 following setting is required:
Go to your partner type LS (logical system) and create outbound parameter:
Message Type:STPPOD
Receiver Port:<Your port number> which connects to PI from ECC
Transfer IDoc Immed checked with Output mode=2
Basic type:DELVRY03
Checked Cancel Processing After Syntax Error.
No other setting is required in above outbound parameter.
Go to RSMIPROACT report
You need enter following data:
1)Plant
2)MRP area of plant
3)If want for all material then enter * or enter list of materials
4)Enter target system (SNC system)
5)checked only Goods receipt Reference
6)In execution parameter select Update run radio button
7)Log select log complete report
8)IDoc type DELVRY03
Lastly main thing is GR date enter GR date.
When you execute RSMIPROACT report you will get this message "No transfer exists for goods receipt reference" then it will ask whether you want to change your selection click on NO.
Now check whether IDoc is got triggered or not?
Let me know for any clarification.
Thanks,
Nikhil

Error "Post the HUs for goods receipt so that they can be transfer "

Hi Gurus,
I am facing a problem while doing PGR the inbound delivery,
I am moving stock from one SLOC (AY02- HU Managed) to Another SLOC
(AA99-
Non HU). Inbound delivery is created .
I did automatic packing and packed the HU generated and saved the
inbound delivery. While doing PGR I am getting error "Post the HUs for
goods receipt so that they can be transfer posted Message no.
HUFUNCTIONS254". Kindly Assist
Steps for Reconstruction
1) MB1B post with 311 movement type.
2) delivery gets created.
3) pack the HU's automatically and HU's were generated, save the inbound.
4) Do PGR .
Regards
Gopi

Hello,
There is a "concept problem". You are not doing a reception, you are posting an issue. After running MB1B system should create an Outbound delivery.
In a HU-managed storage location you should use existing HU in order to pack the delivery. Instead of generate new HUs in the OD, try to pack existing ones.
Regards

Print programs for Goods Receipt, GI, ST, Subcont. TP, Consignment TP ...

Hello Gurus,
There is a Business requirement to have a separate print forms for every Inventory transactions like Goods Receipt, Goods Issue, Stock Transfer, Sub-Contracting Transfer Posting, Consignment Transfer Posting, etc.
We need to use the Transaction MB90 to print all the Inventory documents.
While checking the Output types, we find that basically WE03 is for Goods Receipt (Collective Slips) & WA03 is for Goods Issue / Transfer postings (Collective Slip)
I would like to know that inorder to assign a different Smart Form & Program (One for each of the transactions listed above) to the output types, is there a way around to work with these 2 Output types & have the 5 different Smart Forms - Programs assigned to these 2 Output types or do I need to create a copy of these output types & use them instead, one output type for each Smart form - Print program combination
Regards,
Zafar.

First, you can maintain PRINT ID in the IMG for each movement type 
Second, you can create multiple OUTPUT TYPE - one for each.
Third, in MN21, create ouotput records using a combination of OUTPUT TYPE and PRINT ID
 
Example:
GR movement types 101, 105, etc, you can have PRINT ID 1 and OUTPUT TYPE Z001
GI movmeent types 201,261, etc. you can have PRINT ID 2 and OUTPUT TYPE Z002
 
Configure PRINT ID: IMG path: Materials Management > Inventory Management and Physical Inventory > Print Control 
Configure OUTPUT TYPE: IMG path: Materials Management > Inventory Management and Physical Inventory > Output Determination

Regarding Outbound IDOC for Goods Receipt with MBGMCR03

Hi Experts,
Please let me know ,how to handle TYPE QUANT fields when i am generating an Outbound IDOC for Goods receipt for message type MBGMCR with the IDOC type MBGMCR03.
At item level when passing the value for quantity received field ,the QUAN value into NUMC or CHAR before MASTER_IDOC_DISTRIBUTE to pass it to data record it is showing correctly in my BADI .
after generating the idoc , the field value is appended with next field value passed.
before generating IDOC
erfmg( 60.000) - ENTRY_QTY(060)
efrme (EA)       - ENTRY-UOM(EA)
after generating IDOC
IN WE02
ENTRY_QTY-060EA
later field values are mismatching .
Please let me know the resolution.
Thanks & regards
Vishnu

Hi,
     Standard Idoc types for invoice is INVOIC01 and INVOIC02.
- Use WE30 for seeing Idoc types with segment.
Or otherwise go for Custom Idoc
           Create Custom Idoc type with required fields,custom output type and assign it to partner profiles.(If there is no std idoc type or output type)
          Use Funtion module MASTER_IDOC_DISTRIBUTE to generate Idocs while saving MIRO, for this you need to find exit or implement implicit enhancement while saving MIRO.
http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreatecustomIDOC - Creating Custom idocs

Quality Certificate for Goods Receipt - FAIR

Hi Guys,
I’m after some advice with regards to the QM module.
We implemented QM last year to support our incoming inspection process flow.
The following dynamic rules were created via TCODE QDR1
Z01       Inspection Always
Z02       3 Inspections Plus Annual
Z03       One Off Inspection
In the material master we have actived the inspection type 01.
Next steps:
Quality Certificate for Goods Receipt
We would like to set the certification flag to identify that a first article inspection report (FAIR) is required from goods externally procured.
Today all vendors are required to provide a FAIR with the 1st off receipt for a new material or items which have not been delivered for more than 12mths.
Is it possible to set/create much a rule in QM for the 1st del to be flagged certificate required?
My initial thoughts were
1. To setup quality information records for each material + vendor with the certificate “FAIR”.
2. Then create and assign an inspection plan for the first off delivery.
Problems I can see,
1.     The certificate is only required for the first delivery regardless if the material requires a 2nd 3rd or 4th del to be inspected
2.     How to apply the settings and reset them when a FAIR requirement (Annual)
3.     Creation of this rule would have to accommodate the current QM rules not impact?
Has anyone implement certifications in this way or could they suggest a way it could be managed.
Many Thanks
Paul

Hi Craig,
First thanks for the information on DMR this has solved the problem.
I do have a second question if you could it would be appreciated.
Can you change the QM control key for a PO.
In the material master I've activate QM with control key 0000 no certificate required
After raising a PO a change note is then released under this circumstances the vendors are required to provide a certificate with the PO.
To mange this I would like to change the control key in the PO - I get the error message.
Control key Z001 cannot be used here
Message no. ME554
Diagnosis
You wish to change the control key for quality management in procurement. Only the following changes are allowed:
Set current control key from material
Set existing control key of item 0000
Procedure
Is it possible to change the key at direct in the PO?
Thanks
Paul

Create Automatic Reservation for Goods receipt of FG

When an order is created, the components from the store are reserved automatically. It implies automatic reservation for good issue.
What about AUTOMATIC reservation for goods receipt of finished product? Is it possible to make automatic reservation in PP for goods receipt of finished product, when finished product is ready?
I know that manual reservation for goods receipt of finished product can be done by using MB21 (521).
Thanks in advance.

Your requirement is a little bit confusing...
If you have production order, why do you need GR-reservation for the to-be produced material? The production order itself is a GR-MRP element nad you can post the GR agains it.
If you don't have production order, I understand you need something to plan the GR.
But it seems you want to have both the PrdOrd and the GR-reservation --> you will have the same thing twice in your system.

BAPI needed for Goods Receipt Purchase Order(Transaction : MIGO)

Hi all,
We have a requirement where in we need to post the documents throuh BAPI for Goods receipt Purchase order(Transaction: MIGO).
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

Hi,
use 'BAPI_GOODSMVT_CREATE'
Check this sample.
code
REPORT ZRICH_0001 .
Structures for BAPI
DATA: GM_HEADER TYPE BAPI2017_GM_HEAD_01.
DATA: GM_CODE TYPE BAPI2017_GM_CODE.
DATA: GM_HEADRET TYPE BAPI2017_GM_HEAD_RET.
DATA: GM_ITEM TYPE TABLE OF
BAPI2017_GM_ITEM_CREATE WITH HEADER LINE.
DATA: GM_RETURN TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA: GM_RETMTD TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
CLEAR: GM_RETURN, GM_RETMTD. REFRESH GM_RETURN.
Setup BAPI header data.
GM_HEADER-PSTNG_DATE = SY-DATUM.
GM_HEADER-DOC_DATE = SY-DATUM.
GM_CODE-GM_CODE = '04'. " MB1A
Write 971 movement to table
CLEAR GM_ITEM.
MOVE '412' TO GM_ITEM-MOVE_TYPE .
MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
MOVE '3800533484' TO GM_ITEM-MATERIAL.
MOVE '1' TO GM_ITEM-ENTRY_QNT.
*MOVE 'PC' TO GM_ITEM-ENTRY_UOM.
MOVE '1060' TO GM_ITEM-PLANT.
MOVE '0007' TO GM_ITEM-STGE_LOC.
*MOVE '0901' TO GM_ITEM-MOVE_REAS.
MOVE 'P203601001' TO GM_ITEM-WBS_ELEM.
MOVE 'P203601001' TO GM_ITEM-VAL_WBS_ELEM.
APPEND GM_ITEM.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = GM_HEADER
GOODSMVT_CODE = GM_CODE
IMPORTING
GOODSMVT_HEADRET = GM_HEADRET
MATERIALDOCUMENT = GM_RETMTD
TABLES
GOODSMVT_ITEM = GM_ITEM
RETURN = GM_RETURN.
IF NOT GM_RETMTD IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.
WRITE:/ GM_RETMTD.
LOOP AT GM_RETURN.
WRITE:/ GM_RETURN.
ENDLOOP.
[/code]
Also check the Bapis
BAPI_PO_CREATE --> To create Purchase Order
BAPI_PO_CHANGE --> To change Purchase Order
BAPI_PO_GETDETAIL --> Todisplay Purchase Order
Regards,
Raj.

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Define Number Assignment for Goods Receipt/Issue Slips

Hi Experts,
please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
Customizing for this functionality is composed by the following points:
1. functionality activation at plant level
2. number range group/interval code assignment
3. Groups and intervals creation
4. Plant / Storage Location / Movement type combination assignment to number range group.
Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
You receive a message from SAP that you have to insert the relevant object manually into transport request.
Please can you tell me exactly what I have to put into transport request as object:
- Program ID (I think R3TR)
- Object Type
- Object name
and any other relevant information with all the details.
Thank you very much
Kind Regards
Andrea.

Hi
You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
Reward points if usefu;
Thanks & Rgards
Kishore

Determination of a door for goods receipt via MIGO without inboud delivery

All,
Has anyone set up configuration to determine a warehouse management door for goods receipt when there is no inbound delivery? I wish to utilize door to assist in queue determination and I am unable to find the right settings for door determination on goods receipt.
Thank you,
Sandy

For making the Inbound delivery as required for processing a goods recipt, you need to use the confirmation control key in the PO.
The ASN from the Vendor vvia EDI will post as an Inbound delivery in the PO.
In the configuartion of the confirmation control key maintain the Confirmation sequence with Inbound Delivery and mark it as GR relevant and GR assignment.
SPRO - IMG - MM- Purchasing - Confimrations - Set up confimrmation control.
This setting will ensure that GR does not happen without an IBD

Block Vendor for Goods Receipt without QM

Dear Experts,
We have a specific requirement to set a purchasing block in a vendor (XK05), which must necessarily include a block in goods receipt.
As far as I know, and according to SAP Note 64440 - MMIM: Block vendor for goods receipt, this is only possible activating QM for the material.
However, our client cannot do it for all the materials so we need to find out an alternative solution. Does anyone have any idea how can we do it?
Thanks in advance.
Best Regards,
Andreia

Hi guys,
Thank you very much for your quick replies!
Jürgen L, you are right. The requirement is not to block the GR forever, but just during a period of time, in specific situations.
AKTP MM, we will check the BADI: MB_MIGO_BADI, as suggested. I will come back with feedback, as soon as possible.
If you have more suggestions please feel free to share!
Thank you.
Best Regards,
Andreia

What is the field for good receipts?

hi friends
i got the requirement to create the goods receipts
what is the field for good receipts
plz tell me how to create it
thanks in advance
Edited by: Alvaro Tejada Galindo on Feb 25, 2008 5:33 PM

adapt this to your own requirements.
Structures for BAPI
data: gm_header type bapi2017_gm_head_01.
data: gm_code type bapi2017_gm_code.
data: gm_headret type bapi2017_gm_head_ret.
data: gm_item type table of
bapi2017_gm_item_create with header line.
data: gm_return type bapiret2 occurs 0.
data: gm_retmtd type bapi2017_gm_head_ret-mat_doc.
clear: gm_return, gm_retmtd. refresh gm_return.
Setup BAPI header data.
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_code-gm_code = '01'. " MB01
Write 551 movement to table
clear gm_item.
move '101' to gm_item-move_type .
move '000000000040001234' to gm_item-material.
move '1' to gm_item-entry_qnt.
move 'EA' to gm_item-entry_uom.
move '0004' to gm_item-plant.
move '4000' to gm_item-stge_loc.
move '201' to gm_item-move_reas.
Determine cost center per plant
case xresb-werks.
when '0004'.
move '0000041430' to gm_item-costcenter.
when '0006'.
move '0000041630' to gm_item-costcenter.
when '0007'.
move '0000041731' to gm_item-costcenter.
when '0008'.
move '0000041830' to gm_item-costcenter.
endcase.
append gm_item.
Call goods movement BAPI
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gm_header
goodsmvt_code = gm_code
importing
goodsmvt_headret = gm_headret
materialdocument = gm_retmtd
tables
goodsmvt_item = gm_item
return = gm_return.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.

O/p type for good Receipt Note

Hi.
what is the output type for Good Receipt Note?
How can we assign it?

Hi,
1. Use transaction MB03, Enter the material document and material year.
2. click button 'DETAILS FM ITEM'.
3. Now Click button MESSAGES.
4. Here you have to assign a output type.
5. Click further data, select value 'Send with application own transaction' to field 'DISPATCH TIME'.
6. Use transaction MB90, give the output type assigned for the material document and year, u will get the printable output format for goods reciept.
Output type WE01, WE02, and WE03 can be used.

LIV for Goods receipt with out PO?

Hi all,
How to do Invoice posting for Goods receipt withput PO but with vendor ?
Is it possible in SAP? If not what is the alternative?
Please reply.
Thanks,
Aravind

hi all,
Thanks for the replies.
I am very new to MM, so far i have created LIV's with PO reference only.
Please explain me how to create an Invoice with ref to Vendor in MIRO? I tried to create but it is giving the error "Enter atleast one allocation Item with PO reference" ?
Thanks,
Aravind

Transfer Requirement for Goods Receipt Item

Similar Messages

Maybe you are looking for