Transfer Rule Actrivation Error
We are on BW3.5 and just upgraded R/3 to ERP2005. Our transfer rules for master data are not active, and when we run RS_TRANSTRU_ACTIVATE_ALL, we get an error that reads: "An error occurred when creating transfer structure /BIC/CCBD0PLANT as an IDOC segment in source system"
We were able to use that program to activate the transaction data transfer rules, but something about the master data won't allow the activation.
The Procedure in the error message says to Use the generation log in the source system to identify the error. I am not sure where to look for this.
It appears to be a connection problem, but it is weird that the transaction transfer rules we are able to activate.
This is in a QA system, so we cannot activate directly.
Thanks,
Hi ,
Check whether the transferstructure table is active ...
if not there si a difference between source system data source and transfer rules you assigned...
Replicate the datasource...Check each field for assignment.... and then activate in Dev..
Probably after generating the transstruct/ rules you might changed some thing either in rules or in datasource.
Cheer's
HVR.
Similar Messages
-
Transfer rules activation error after upgrade to BI 7 - DB Connect
Hello all,
We just upgrade our BW system to BW 7. Since that, we now have error when we want to activate Transfer Rules. Here is the error message:
Error generating a program
Message No RSAR245
Template: RSTMPL80
Error code: 6
Row 6
Message: the data object "SY" has no component called "SUBE
The strange thing is that the error occurs only to Transfer rules that are coming from a DB Connect source system (to all of them).
We have kept the datasource in 3.5, we have not migrate them and would not like to do it if possible.
Thanks for your help in advance.Hi Jérémie:
Take a look at this thread, it might help you.
"error Message no. RSAR245"
Regards,
Francisco MIlán. -
Transfer Rules - Activation Error
When I trying to activate Transfer Rules, I'm keeep getting an error as "Error in source system", I could not able to track down to this error.
Anyhelp is greatly appreciated. We have R/3 4.6c and BI 7.0.
Thanks in advanceHi,
Are running on 7.0 ver or 3.5 of bi, in case ur on 3.5 chk weather your data source is replicated as 3.5 or 7.0, in case you are working on 7.0 , then replicating the data source itself activated the "Transformation rules" (if created already), Scaheduling the DTP will do the job of staging.
Hope this will be expedite
Thax & Regards
Vaibhave Sharma -
Error when trying to access 2LIS_VDITM transfer rules
hi everyone,
i need help with this issue if you have any ideas/suggestions
even though i had installed these transfer rules properly and i have loaded data in my infocube,
i now get a meesage_type_x error when i try to access the transfer rules. the error refers to a navigational attribute which:
a. i cannot find in my infocube so i can remove it
b. i cannot find in my infoobjects in BI_cont so i can install it
the error is the following and i would appreciate your input as i am completely stuck in my work now, thanks:
Error analysis |
Short text of error message:
ATR_NAV_OF_DTA_PRO_NOT_FOUND 0SOLD_TO__0DB87SIC1
Long text of error message:
Technical information about the message:
Message class....... "R7"
Number.............. 000
Variable 1.......... "ATR_NAV_OF_DTA_PRO_NOT_FOUND"
| Variable 2.......... "0SOLD_TO__0DB87SIC1"hi
check this link may this helps you
ATR_NAV_OF_DTA_PRO_NOT_FOUND" in 2LIS_13_VDITM
error when installing purchasing infocube
http://boardreader.com/thread/Dump_while_change_or_display_of_a_Transf_6rhnjX163h2.html
Edited by: Srikanth.T on Oct 31, 2011 10:06 AM -
hi friends,
I have activate the transfer rules some error araised that is
InfoObject 0CRM_TR is assigned to several fields of data source 0CRM_OPPT_I.
plz give me solutionHi,
1) R u passing two fields data into 0CRM_TR.Use correct formula or routine to pass the value.
OR
2) Change the mapping of InfoObject 0CRM_TR from the multiple fields. Try to activate TS manually. Otherwise execute the code RS_TRANSTRU_ACTIVATE_ALL in SE38 there u need to give Infosource and Source system name and click on execute. TS will be activated.
Hope this helps,
With Regards,
Siva. -
BW3.5: Error message when trying to activate the transfer rule
When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
ArunabhaHi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN -
Error while activating transfer rules needs help.
The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar -
Error in creating transfer rules beween infosource and datasource in BI 7.0
Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi -
Conversion exit error while activating the transfer rules
Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM -
Error while migrating transfer rules
Hi all,
When migrating <b>2LIS_02_SCL</b> transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199 after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
Regards
KKHello,
unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
Please adjust the rules to the ABAP OO compliance.
This how to paper should help:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
I hope this helps.
Michael -
Error while activating transfer rules
Transfer method 'TRFC with PSA' is not supported by the source system
Message no. RSAR508
Diagnosis
The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
Procedure
Define the PSA in the source system.Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
If you still face this error even after changing Transfer method, check below thread.
Transfer method 'TRFC with PSA' is not supported by the source system
Edited by: koundinya karanam on May 22, 2008 12:47 PM -
Error when transporting transfer rules
Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego LombardiniHello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui -
Error while creating transfer rules.
Hi
I am creating transfer rules and a error message says " IS_00_BB does not exist". (IS_00) is the desc. of the info source)
can someone help me on this????
I had created transfer rules for another cube in the same info area, but no error had come then..
Thanks.
Aswath.Hello,
The problem you are reporting could be that you are using the Transfer
Method 'IDOC' for the affected transfer rule(s). You should use the
'PSA' transfer method (rather than the 'IDOC' method), as the IDOC
method is very old.
If so, please change the transfer method in the affected transfer rules
to 'PSA', then try to activate the transfer structure again. This should
solve the problem, in which case, please let us know by clicking on the
'Close' button.
If the problem persists please create the report that is relevant for your system release
as per the SAP note 493422 and execute the report in your system, the report can be
created in se38, please talk to your basis team if you have problems creating the report.
Best Regards,
Des -
Run time error while activating the Transfer Rules
Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
KishoreHi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma -
BI Content Error when activating transfer rule / SAPSQL_ARRAY_INSERT_DUPREC
Hello Experts,
when i want to iinstall the transfer rule /CRMBW/OLTP_OPPORTUNITY_ITEM
from Data Source /CRMBW/OLTP_OPPORTUNITY_ITEM to InfoSource
/CRMBW/OPPORTUNITY_I (all Business Content Objects) Iam facing the following situation:
1. When I use "Simulate Installation" i get the warning for all of the fields: Field APP_SERVER is not supported by DataSource /CRMBW/OLTP_OPPORTUNITY_ITEM in source system SLOGICOCRM. Transfer rules were deleted however, delivered.
2. When I use "Installation" i get a dump of the following type:
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Error in the ABAP Application Program
The current ABAP program "CL_RSAR_FORMULAS==============CP" had to be
terminated because it had come across a statement that unfortunately cannot be executed.
More details of the dump are:
Trigger Location of Exception
Program CL_RSAR_FORMULAS==============CP
Include CL_RSAR_FORMULAS==============CM00E
Row 40
Module type (METHOD)
Module Name GENERATE_ACTIVE_VERSION
The problem is, i can not map the transfer rule by myself because the the transfer structure contains some important Routines and Formulas which are missing in thereports and i dont know the source code they are using.
Can anybody help me?
Greetings from Barcelona
Oliver
Edited by: STRATESYS CONSULTING on Jul 23, 2009 2:35 PMHi Oliver,
Can you please check if you can use the SAP notes 1263075 and 985052 to resolve the problem?
Best Regards,
Des
Maybe you are looking for
-
Operations Sub Contracting in Production Orders
Dear All I need to do a operation subcontarcting.The requirement goes as follows There are 3 operations 10 Moulding in house ,20 - Subcontracting To vendor for operation & 30 - With the received Material from Subcontractor One more Moulding operati
-
Hello. My iTunes doesnt work at all. When I click on iTunes, it doesnt open or anything. I have uninstalled it and then re-installed it many times, it didnt work. Because of my iTunes not working, i had no choice but to put my songs on manually using
-
HT1414 i phone 5 sound dose not work what should i do i restore still not working?
help cant seem to get the sound on my to work after i install the os7?
-
Does Adobe have a phone support option? I have been using ps2 for years and today the program tells me that my 30 day trial has ended . . .can any one help with this issue?
-
Internal order types and number ranges
We have two SAP instances and want to load Internal order types and number ranges and Internal orders from 4.6 to 4.5 version. I need to determine if there is an overlap of number ranges for the internal order types used in 4.6 and 4.5 Could you plea