Transfer rules are inactive in BW Production system

The transfer rules are inactive in BW(Production) for the datasource 0FI_GL_4. I tried to activate by executing a program "RS_TRASNSTRU_ACTIVATE_ALL" and another option by moving transport request from Quality to production( I have done the replicate datasource as well). In the quality system the data flow is ok to ODS(0FIGL_O02). but in Production not able to activate the transfer rules. please suggest me the best practice.
Regards,
Leo.

Hi,
Whenever we get such an error, we first need to check the Transfer Rules (TR) in the Administrator Workbench.
Check each rule if they are inactive. If so then Activate the same.
You need to first replicate the relevant data source, by right click on the source system of D/s ->Replicate Datasources.
Now execute the following ABAP Report Program u201CRS_TRANSTRU_ACTIVATE_ALLu201D.
It asks for Source System Name, InfoSource Name, and 2check boxes. For activating only those TR/TS which are set by some lock, we can check the option for u201CLOCKu201D. For activating only those TR/TS which are Inactive, we check for the option for u201COnly
Inactiveu201D.
Once executed it will activate the TR/TS again within that particular InfoSource even though they are already active.
Regards,
Suman

Similar Messages

Transfer Rules are Inactive in BI 7.0

Hi,
I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
Object 0PS_CLM_CST object version not found in table
Object 0PS_CLM_CST object version not found in table
Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
Please provide me solution.

>
subba reddy wrote:
> Hi,
>
>
> I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
> and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
> Object 0PS_CLM_CST object version not found in table
> Object 0PS_CLM_CST object version not found in table
> Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
> Please provide me solution.
Hi,
After running the above program,catchup your infosurce and do manually activation of your transfer rules and updates as well,if present.
check whether all the InfoObjects are mapped correctly and the status is active or not.
Hope it helps...

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Inactive infoobjects in Production system

Hi All,
I have started the transportation from BI dev to BI production and I am facing a problem all the objects are inactive in BI production while as those objects are active in BI dev.
I cannot use infoobject activation program in production and niether I can do it manually.
I will appreciate your replies.
Let me tell you this is fresh transport and only first unassigned infoobjects were transported.
Regards
Rahul Bindroo

Hi Rahul,
Any message after transport?
Did you replicate your R/3 data sources first before transporting anything. I think you need to replicate r/3 datasources first and than try others. Replicate datasources going to your BW server RSA1->Source Systems and replicate.
Here are the sequence I maintain for transporting but different people do differently. I find it very helpful transporting staffs piece by piece so that if there are any errors, I can solve the problem easily.
BW Transport Sequence:
Info Object Transport only infoobject.
Info Area
Info Catalog
Cube & ODS togather
Multi-Provider/Multicube -
Infoset
Transfer /Update Rules
Role and Authorization
Report
Workbook
Hope it helps..

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

Transfer rules are mandatry While creating Info source

Hello BI Guru's
Is transfer rules are mandatry while creating Info Source in BI.
Please currect me if i am wrong.
I have created one genric extracter and want to create info source for that in BI and planning to create Transfermation btween Datasources and infosource and from info source loading data target through transfermation.
Please advise me which way is best way to follow the desing?

hi,
in BI 7.0 transfer rules and update rules are not mandantory,
DataSource -> Transformation -> (DTP)-->Data Target
instead of TR/UR-- transformation is there
if helpful asign points
regards
harikrishna.N

Inactive DataSource in Production System

Hi Experts,
I have a situation where DataSource inactive once I initialise infoPackage.we transported from Development to Production and it was active (green) in Production System.I tried to initialise infoPackage then I got the message
DataSource 2LIS_13_VDITM must be activated.How can I resolve the issue.Please throw some light on this issue.I am in a position like golive soon.your help will be appreciated and awarde

Hi,
1. Replicate the datasource at Application component Level. i.e. If your datasource is in an application component say, BW then right click on the application component "BW" and select "Replicate Metadata".
2. If you have transfer rules then activate them with program "RS_TRANSTRU_ACTIVATE_ALL".
SE38 -> RS_TRANSTRU_ACTIVATE_ALL, if you are not able to do it, ask help from your basis to do it, they will have option to do changes directly in prodution itself.
Also chk Note 1056060 - DataSource: Reactivation in the production system
Hope this helps,
Regards
CSM Reddy

Infosets are not display in production system

hi,
I am new for this topic ..
I got the production system acesses through client..as per client they send some document regarding infoset which are already created in sapbw database ..but in sq02 and sq01 there is no display of created infoset ...
don't give any urls for this topic plzz explain in few words..
plzzzzz ..urgent
regards,
goodyear..

Procedure
In the InfoSet: Initial Screen, choose InfoSet -> Additional Functions -> Adjust.
This takes you to the Log Display dialog box. The system shows you errors and warnings in the same way as when it is checking or generating an InfoSet. There is an additional Adjust pushbutton on the pushbutton toolbar.
Choose Adjust.
The information from the data dictionary is copied over into the InfoSet.
Choose Generate.
It's recommended that once you have adjusted the InfoSet, you also adjust all the queries belonging to this InfoSet. This ensures that the technical properties that have been changed are also copied over to the query definitions.
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/cb4044455611d189710000e8322d00/content.htm
Hope it helps!
Bye,
Roberto

Transfer Rules is not Activated in BWQ System

Hey all,
I am transporting the Infocubes from BWD to BWQ. I got an error in "errors occured during post-handling RS_After_Import for ISCS L" and "the errors affect the following components: BW-WHM (Warehouse Management)"
I had assign the "conversion of logical systems names" in BWD and BWQ.
The detailed error can be viewed under this path:
http://h1.ripway.com/aywen/TransferRulesDeactivatedinBWQ.zip
thanks...

Hi,
Just check the connection parameters between BWQ and the source system. If it is ok then Replicate the data sources bfore activating the transfer rules.
Still the problem exists try this functional module in SE38 to activate the transfer rules: RS_TRANSTRU_ACTIVATE_ALL
Hope this will help you.
Rgs,
I.R.K

Update rules are inactive

Hello All,
i have added another dimension 0mat_unit to the existing infocube of multiprovider to create a report.
As i added new dimensions underlying update rules became inactive and when i try to activate them iam getting message IC=xxxx IS=yyyy error when checking the update rules.
can you please give ur advice to solve the problem

Hi,
When you add some new objects to your cube then you have to add them in your info source and data source in order to get correct data and if you dont want to populate data to them from source then you can have your own rules like routines and formulas so please add them to comm structure and transfer structure and map the rules and then try to activate them it will work,
Thanks,
Pavan.M

2LIS_02_SCL Transfer Rules are missing

Good Morning everyone, I recently activated BI Content (7.05 SP4) in BW (7.02 SP8) for infocube 0PUR_C01, and I can not see the transfer rules for 2LIS_02_SCL, what can I do?

Juan Orozco wrote:
I did install BC for 2LIS_02_SCL Transfer Rule (ISMP) again with options "In data flow before and afterwards", I got the right flow of objects from 2LIS_02_SCL ECC datasource to 0PUR_C01 Infocube in BW installed, but the Transfer Rule 2LIS_02_SCL status is Modified(Saved), when I try to activate this Transfer Rule, the system send the message "There is no PSA for InfoSource 2LIS_02_SCL_DA and source system LOGSYS120", what can I do?
Case A. RS_TRANSTRU_ACTIVATE_ALL
Case B. Give the tech name of the CLNT120 & generate it. RSDS_DATASOURCE_ACTIVATE_ALL
Case C. Replicate the datasource after adding/deleting fields in R/3. Right-click on this datasource and select 'replicate metadata' again. Activate using FM in Case A.
Edited by: Arun Bala G on Feb 16, 2012 9:29 PM

Hierarchy Transfer Strucutre & Transfer Rules are not transported to QA sys

hai
I have one master data infobject. And i loaded the text , attribute, hierarchy data from Flat file.
I need to transport it QA system . I did it.
But when i checked in QA system. It says that "HIERARCHY TRANSFER STRUCUTRE" is not avaialbel in Qa system .
So how can i transport the "Hierarchy Transfer Strucutre & Transfer Rules" to QA ssytem .
Please tell me
rizwan

transaction SM59 / R/3 connections; you should see your system there.
double click and Test connection.
then menu/test/authorization.
if you have transported stuff already then it is most likely because of your flat file source system.... Ensure that they're defined exactly the same way in your DEV and PROD! Right click this source system and perform a CHECK and/or RESTORE and/or ACTIVATE.
Partner profiles should also be similar. Transaction WE20 / Partner type LS / your flat file sys.
Finally ensure that your prod sys can access your flat file the same than your DEV!
did you already import TRules from with flat file?
hope that helps
Olivier.

Line Breaks are not appearing in Production system

Hi,
In my company users have one problem, which I am not getting the same either Dev or Quality. I tried to replicate it but I am getting fine without any issues. Issue is users create sales order in Interaction Center by using the credit cards. We wrote the code to pop up with the information about the amount being deducted against each card( users can use multiple cards) once the order is saved.
Below is the code in one method of the class. lv_text contains the information like 'Visa 3002 for amount 1209.00 is authorized(#1567)'
CONCATENATE lv_text ' ' INTO lv_text SEPARATED BY cl_abap_char_utilities=>newline.
Problem is in Production we are not getting line breaks whereas I am getting fine in Dev and Quality with the above code. In production, users are getting below. There is full stop between the amount(#1567$) and .
Visa 3002 for amount 1209.00 is authorized(#1567). Visa 5443 for amount
1300 is authorized(#7654). 
But in Dev and Quality the same above message we get like below, which is correct.
Visa 3002 for amount 1209.00 is authorized(#1567).
Visa 5443 for amount 1300 is authorized(#7654).
I changed personal layout values in the Personalization and tried but no use.
Can anyone help me in this regard?
Thanks,
Baasanthi.

Hi Andrei,
I am closing this issue as it is being taken care by team lead.
Thanks,
Baasanthi.

System copy problem...No transfer rules available

Hi ,
We are facing a problem in getting the Transfer Rules...
1.we did a system copy from PRD system and created a Sandbox system .
2.After the system copy the problem came from the source system.....i.e for the datasource's in the table RSOLTPSOURCE the mapping is showing for 2 systems....CRM PRD system & CRM SANDBOX system....
3.Coz of this issue the Transfer rules are not available and the all the DS are inactive......
4.I tried with the FM RS_TRANSTRUC_ACTIVATE_ALL but im getting message as no transfer structure is available.
5.When i tried to manually activate the DS from BW side it is asking to create TRANSFER RULE.
Please help me to sort it out.....
Thanks in Advance
BASKAR

HI ,
I also raised a OSS to SAP ....what they suggested is....
According the logs in BWS there was definitely a systemcopy from BWP to BWS, but the BDLS logs looks very strange, which actually did not converted anything, because the administration tables containing some very strange entries.
Lets take the datasource 0crm_sales_act_1 for example. If you check this datasource in table RSOLTPSOURCE you can see, that it exists currently for both source systems:
OLTPSOURCE LOGSYS OBJVERS
0CRM_SALES_ACT_1 CMPCLNT501 A
0CRM_SALES_ACT_1 CMSCLNT501 A
Unfortunately the root cause of this is unkown, but most probably it is caused by an improper copy procedure, where the consulting note
886102 was not followed.
To solve the problem, please follow the below steps:
1. Implement note 1405233 and 1336119 to your system 2. Go to RSA1 and delete the source System CMS.
3. With function module rsar_logical_system_delete delete the source system CMP:
I_LOGSYS CMPCLNT501
I_FORCE_DELETE X
I_NO_TRANSPORT X
I_NO_AUTHORITY X
4. In your productive BW (BWP) please create a transport request which contains all the source system dependent objects for CMP. Please check note 886102 scenario B3 step 2 for details.
5. In BWS, please recreate the source system to CMS and activate it but please do not replicate the datasources yet.
6. In BWS please maintain the table RSLOGSYSMAP and map CMP to CMS and import the transport request created in step 4.
Please be aware, that such a constellation happens mostly, if some steps are missed or are not carried out properly from consulting note 886102. Please get in touch with your basis colleagues and provide them this note, so the next time such a problem does not occur.
I hope this helps to solve the problem.
Thanks
BASKAR

Transfer rules are inactive in BW Production system

Similar Messages

Maybe you are looking for