Transfer rules are mandatry While creating Info source

Hello BI Guru's
Is transfer rules are mandatry while creating Info Source in BI.
Please currect me if i am wrong.
I have created one genric extracter and want to create info source for that in BI and planning to create Transfermation btween Datasources and infosource and from info source loading data target through transfermation.
Please advise me which way is best way to follow the desing?

hi,
in BI 7.0 transfer rules and update rules are not mandantory,
DataSource -> Transformation -> (DTP)-->Data Target
instead of TR/UR-- transformation is there
if helpful asign points
regards
harikrishna.N

Similar Messages

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Version error while creating info package of data source 0fi_gl_10

Dear Friends,
I have replicated the data source 0fi_gl_10 into sap bw but while creating info package i am getting error " The DataSource 0FI_GL_10(E01CLNT200) does not exist in object version A". IS the manual activation always should be done for that ?
Regards
Nilesh

Hi,
Please check if the veriosn of DataSource is A or not. Sometimes it shows as active but if you open the datasource then it might be in modified version only. Do activate it manually, it will serve your purpose to create a infopackge.
Regards,
Anjum.

While creating info record mandatory fields are disable .

hi all,
while creating info record some mandatory fields are disable (valid to) in condition what i can do to procede further?
how i fill data in that field?

Hello,
I think that is set as a mandatrory field. You can give any values in days here. Enter 1 or 2 and proceed.
Prase

Update mode options while creating info package

Hi all .
while creating info package in update tab we have different radio buttons as
FULL UPDATE,DELTA UPDATE,INTIALIZE DELTA PROCESS. could you pls explain this optons.
Thanks in advance.
Cheers,
sami.

Hi Sami,
We have two update modes 1)Full update 2)Init Load(to enable delta)
Full Load --->Master data Load
Init Load----->Transaction data Load.
Full Update-To load Historical Data.
Init-This is done to enable the Delta Upload.
Delta will be done only if the Init has happened.
For deltas they are Data source specific which are delta enabled.
1. Full Load (Extracts whole data available in source)
2. Initialization (without data transfer): Enables only delta and no data.
3. Initialization with data: Extracts whole data from source and enables delta.
4. Delta: Extracts only modified or new data.
Above modes works for Master as well as Transaction also.
For further information check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
Cheers,
Tanish.

Error while creating Info Spoke....

Hi,
I am facing one problem while creating Info Spoke.I have 4 DSO which included in one Infoset & that infoset incluede in one Multiprovider. I want to creat info spoke on this Multiprovider.But when i changed the tab or at time of save & activate it gaves me error as "InfoObject ZCGNCRM2___F100 is not available in version A". I checked this info-obj.its already in active version. I reactivate it.I reactivate infoset & multiprovider also.But still exist this error.
Please suggest me any solutuion.

Hi Sandeep,
Check this info object is included in any of your DSO or Info set and Multi provider.If yes check all are active or not.
activate the info object once again using program RSDG_IOBJ_ACTIVATE and activate your Info spoke
Check below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0d48577-9542-2e10-05a1-d6c1e07ea641?quicklink=index&overridelayout=true
Regards,
Venkatesh

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

Transfer Rules are Inactive in BI 7.0

Hi,
I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
Object 0PS_CLM_CST object version not found in table
Object 0PS_CLM_CST object version not found in table
Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
Please provide me solution.

>
subba reddy wrote:
> Hi,
>
>
> I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
> and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
> Object 0PS_CLM_CST object version not found in table
> Object 0PS_CLM_CST object version not found in table
> Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
> Please provide me solution.
Hi,
After running the above program,catchup your infosurce and do manually activation of your transfer rules and updates as well,if present.
check whether all the InfoObjects are mapped correctly and the status is active or not.
Hope it helps...

Transfer rules are inactive in BW Production system

The transfer rules are inactive in BW(Production) for the datasource 0FI_GL_4. I tried to activate by executing a program "RS_TRASNSTRU_ACTIVATE_ALL" and another option by moving transport request from Quality to production( I have done the replicate datasource as well). In the quality system the data flow is ok to ODS(0FIGL_O02). but in Production not able to activate the transfer rules. please suggest me the best practice.
Regards,
Leo.

Hi,
Whenever we get such an error, we first need to check the Transfer Rules (TR) in the Administrator Workbench.
Check each rule if they are inactive. If so then Activate the same.
You need to first replicate the relevant data source, by right click on the source system of D/s ->Replicate Datasources.
Now execute the following ABAP Report Program u201CRS_TRANSTRU_ACTIVATE_ALLu201D.
It asks for Source System Name, InfoSource Name, and 2check boxes. For activating only those TR/TS which are set by some lock, we can check the option for u201CLOCKu201D. For activating only those TR/TS which are Inactive, we check for the option for u201COnly
Inactiveu201D.
Once executed it will activate the TR/TS again within that particular InfoSource even though they are already active.
Regards,
Suman

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Error while creating data source in bi for uc connect

Hi Experts,
we have using ud connect to pull the data from ms sql server using jdbc,we have maintained all the settings in the j2ee engine and also we performed the smoke test which showed the tables content in the ms sql data base.
and also we have maintained the rfc connection between the j2ee and sap bi,and performed the test connection which excecuted great.
but while creating the data source in sap bi administration work bench(rsa1)>sourcesytem>udconnect>create
we have maintained the following parameters
rfc destination----
we have maintained the rfc destination,which we could see in sm59 for the sap bi client
logical system name----
we have mentioned a generic logical system name(here we are not sure)
type of connector----
jdbc
name of the connector------ sdk_jdbc
sourcesystemname----
it has taken the logical system name description when we enter the logical system name.
once after maintaining the setting.when we performed the check.
it showed us the error
check failed rfc connection:check destination

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Error while creating Info Package

Hi,
I am new to SAP-BW .Could anyone help me in fixing the following error .
I have created an Info source for characteristic data and then trying to create a Infopackage to load master data , I have used the characteristic Material Number(IO-MAT) in this case .
When creating the Info Package I got two data sources in the pop up , Material number (Master data)IO_MAT_ATTR and Material number (Texts) IO_MAT_TEXT .
I was able to load data from a flat file into Data Source Material Number (Master data) But when I was trying to follow the same procedure and load the data for 'Material number(Texts) IO_MAT_TEXT' it gives me the following error .
Select the Language field in the source system -> Long Text
I am not able to figure out and proceed further. Pls help me out.
Regards
Sudha

I have another question..I was able to fix the error regarding info package but unable to load the data..(data load is being failed)
In the DataSource/Transfer Structure I have LANGU , /BIC/ZB4_MAT (Material Number infoobject which i created) and TXTSH Fields ..
the flat file which i used has Language, MaterialNumber,description pattern alone..
(eg . E , M001,cookie ) and when i try to load this data..and check in the Monitor - Administration Workbench..it shows as unsuccessful..
The following error msg :
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
I could'nt see the long text of Help information...
could you help me out in figuring out this..
Points assigned for previous answer..
Regards
Sudha

Transfer rules are mandatry While creating Info source

Similar Messages

Maybe you are looking for