Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Similar Messages

Transfer rules are inactive in BW Production system

The transfer rules are inactive in BW(Production) for the datasource 0FI_GL_4. I tried to activate by executing a program "RS_TRASNSTRU_ACTIVATE_ALL" and another option by moving transport request from Quality to production( I have done the replicate datasource as well). In the quality system the data flow is ok to ODS(0FIGL_O02). but in Production not able to activate the transfer rules. please suggest me the best practice.
Regards,
Leo.

Hi,
Whenever we get such an error, we first need to check the Transfer Rules (TR) in the Administrator Workbench.
Check each rule if they are inactive. If so then Activate the same.
You need to first replicate the relevant data source, by right click on the source system of D/s ->Replicate Datasources.
Now execute the following ABAP Report Program u201CRS_TRANSTRU_ACTIVATE_ALLu201D.
It asks for Source System Name, InfoSource Name, and 2check boxes. For activating only those TR/TS which are set by some lock, we can check the option for u201CLOCKu201D. For activating only those TR/TS which are Inactive, we check for the option for u201COnly
Inactiveu201D.
Once executed it will activate the TR/TS again within that particular InfoSource even though they are already active.
Regards,
Suman

2LIS_02_SCL Transfer Rules are missing

Good Morning everyone, I recently activated BI Content (7.05 SP4) in BW (7.02 SP8) for infocube 0PUR_C01, and I can not see the transfer rules for 2LIS_02_SCL, what can I do?

Juan Orozco wrote:
I did install BC for 2LIS_02_SCL Transfer Rule (ISMP) again with options "In data flow before and afterwards", I got the right flow of objects from 2LIS_02_SCL ECC datasource to 0PUR_C01 Infocube in BW installed, but the Transfer Rule 2LIS_02_SCL status is Modified(Saved), when I try to activate this Transfer Rule, the system send the message "There is no PSA for InfoSource 2LIS_02_SCL_DA and source system LOGSYS120", what can I do?
Case A. RS_TRANSTRU_ACTIVATE_ALL
Case B. Give the tech name of the CLNT120 & generate it. RSDS_DATASOURCE_ACTIVATE_ALL
Case C. Replicate the datasource after adding/deleting fields in R/3. Right-click on this datasource and select 'replicate metadata' again. Activate using FM in Case A.
Edited by: Arun Bala G on Feb 16, 2012 9:29 PM

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Activating transfer rules for new source system

Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
Sujai

Hi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V

Transfer Rules are Inactive in BI 7.0

Hi,
I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
Object 0PS_CLM_CST object version not found in table
Object 0PS_CLM_CST object version not found in table
Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
Please provide me solution.

>
subba reddy wrote:
> Hi,
>
>
> I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
> and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
> Object 0PS_CLM_CST object version not found in table
> Object 0PS_CLM_CST object version not found in table
> Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
> Please provide me solution.
Hi,
After running the above program,catchup your infosurce and do manually activation of your transfer rules and updates as well,if present.
check whether all the InfoObjects are mapped correctly and the status is active or not.
Hope it helps...

Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

Transfer rules are mandatry While creating Info source

Hello BI Guru's
Is transfer rules are mandatry while creating Info Source in BI.
Please currect me if i am wrong.
I have created one genric extracter and want to create info source for that in BI and planning to create Transfermation btween Datasources and infosource and from info source loading data target through transfermation.
Please advise me which way is best way to follow the desing?

hi,
in BI 7.0 transfer rules and update rules are not mandantory,
DataSource -> Transformation -> (DTP)-->Data Target
instead of TR/UR-- transformation is there
if helpful asign points
regards
harikrishna.N

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the

Hi friends
when i have trying to transport infocube 0fiar_c03 with infosource 0fi_ar_4 from development client.the following message has shown as error "No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the control table".pl let me know the possible cause of error.
Rgds
Tukuna

dear Tukuna,
it seems the transfer rules not transport.
try in dev, change transfer rules,
and from menu extras (beside go to) -> object directory entry -> transfer rules -> in next screen, check if package/development class is $TMP, click pencil icon, and choose your package/dev class, system will prompt request, create new request and transport.
<b>if package/dev class isn't $TMP</b>, try following,
rsa1->transport connection->left panel choose 'object type' and middle panel 'infosource' and 'select objects', and choose '0fi_ar_4' and 'transfer', then you will see 0fi_ar_4 in right panel, we will use this infosource to collect transfer rules.
you may need to specify the source system assignment in transport connection when collecting objects, click 'source system assignment' and make sure your r/3 source system is marked.
choose collection mode 'manual' and grouping 'in dataflow before', and 'execute', after objects collection finished, expand the infosource and make sure your transfer rules and datasources are there and marked. click transport (truck icon).
also make sure you maintain the source system mapping in TARGET system (QAS), rsa1->tools->source system mapping (tcode rslgmp), fill 'orgsrcsys' with r/3 dev and 'trgsrcsys' with r/3 QAS, do the same for BW Prod with r/3 qas for 'orgsrcsys' and r/3 prod for 'trgsrcsys'.
hope this helps.

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

Essential transfer parameters are missing in record: 000001

I have been trying to create a delivery ( Type LB) trough ME2O and get
this error .
Essential transfer parameters are missing in record: 000001
Message no. VL 561
Diagnosis
Information necessary for this delivery is missing.
System Response
Depending on the category of the delivery being created, the system
needs the following transfer data:
Outbound delivery::::::::
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery::::::::::::::::::
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
Outbound and inbound deliveries from goods movements::::::
Plant and sales unit transfer data is always mandatory..
Please help me how to fix this issue.
Thanks in advance

hi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P

IDOC in 51 status.Essential transfer parameters are missing in record

Hi All,
Essential transfer parameters are missing in record: 8701 000001
Message no. VL561
I am not understanding what is missing in the IDOC.
Please help me in resolving the issue.
Thanks,
Forum

hi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P

Prevent objects being transported for Sandpit source system

Hi there,
We have a 3-tier systems landscape for BI: DEV, QAS, PRD (we do not have a sandpit BI). In our R/3 development system we habe two clients which are both setup as source system for BI DEV. One of the clients in R/3 DEV serves as sandpit in that system and objects can't be transported from it. However, since this client is connected to BW, objects related to this source system can be transported from BI DEV. We want to prevent that, so only the objects in BW DEV for the real R/3 DEV development client are allowed.
Is there a way in BI to configure a source system in such a way (other than via security roles/profiles), that objects related to this source system can't be transported?
Cheers.

Sander, you should post this in BASIS also. By posting in both the forums, you have a better chance.
In case BASIS folks say that they cannot stop this, try this work-around.
In BWQ, in RSA1, there is a Source System Mapping in one of the tools menu. There, your DEV is mapped to QAS, etc.
There, you may have your R/3 DEV mapped to R/3 QAS.
See if there is an entry for your R/3 Sandpit/Sandbox. If there is one, leave the mapping for it as Blank.
See, the only Objects that are related to Source System in BW are InfoSource-DataSources. If there is no mapping for SOurce System in BWQ, then the transport will fail.
This is just a thought.
Uday-Ram Chamarthy

No posting rules are exist for account key

Guys...
I have done the configuration part and created tax codes for sales and purchases. When i am trying to post the invoice in Customer and vendor, the system is throwing an error message as below.
" No posting rules are exist for account key"
I have checked in OB40, and the details are correct.
Tax procedure, condition types and transaction keys are also correct.
Can someone suggest the solution please?
Thanks
nkonni

Hi
Check weather you have assigned Taxcodes in OBCL T.code or in this Path : Assign Tax Codes for Non-Taxable Transactions for your Company code . if not Assign it.
this shoud solve your issue..
Thanks
Goutam

Transfer rules are missing for selected source system in BI content

Similar Messages

Maybe you are looking for