Transfer Rules for two Source System in Production

Hi All,
I have a question.
I have source system ECDCLNT230 (ECC Devlopment) which is connected to BIDCLNT200(BID Devlopment) I have two production source system ECPCLNT410 (ECP Pre Production Client) & ECPCLNT400 (ECP Production Client) which i want to connect with BIPCLNT400. when i transport my content from ECDCLNT230 to ECPCLNT410 and ECPCLNT400 , it works fine. i created 2 source system in BIPCLNT400 and replicated data source in to BIPCLNT400 so all data source has replicated.
Now when i transport the request from BIDCLNT200 to BIPCLNT400, i need two transfer rules, two transformation one for each source system. for that what kind of settings are required.
Thanks is advance.
Regards,
Komik Shah

Hi,
If I understand correctly, in your BW Production system, you want to connect / load data from your ECC Pre Production and Production system.
In this case, to automate the transport needed for changes of transfer rules for both source system, you will need to have two tranfer rules in your BW Dev. You can either create two source system in Dev pointing to the same ECC Dev system, or one to ECC Dev and the second to ECC QA. Use different name for this two source system.
In BW Production, you then then maintain the source system conversion of both source system.
Thanks.

Similar Messages

Activating transfer rules for new source system

Hi
we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
Regards
Sujai

Hi Sujai,
There are many cases when this program is used.
When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
If the program does not work,then you are left with the transport option.
Thanks & Regards,
Suchitra.V

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Why no transfer rules in our BI system

Hi.experts:
I have a BI system,and the patch level is BI_CONT 703 patch 8..and My SAP BW version is SAP_BW 700 patch 0018.I found that no transfer rules for 3.X datasource and 3.X infosource.
Any body has the same situation?
Best Regards
Martin Xie

Hi,
Not sure if this helps.
Check in BI Content tab --> Source system assignment button. Flag the source system for which you are installing the transfer rules. Then you will get transfer rules for the source sytem.
If nothing is flagged in the source system assignment, you can find transfer rules for all the systems.
Regards,
Murali.

Process chain - Two source system issue

Hi Experts,
I face problem when i transport a process chain from BW DEV to Quality.
I have two source systems in Quality ECI and EXS.EXS is a sandbox server(Source system) which we no longer use.
When i transport the process chain from DEV to QA, i get two DTP's automatically added to Process chain in quality for two source systems ECI and EXS whereas i do not want the data to be loaded from EXS client.
I checked the BW dev system, it has only one DTP in the process chain.
Now I want to elminate the other DTP in the process chain in quality.
Please suggest.
Regards,
Srini

I Dont think so a DTP for EXS system has got created automatically when you transport the PC to QA (which actually doesn't exist in DEV).
Please check you DEV system once again, there might a DTP from EXS system also.. other wise go the Release TR and then check the contents-->iif you find two DTP's there then it is there in the dev system..
Any ways if you want to delete the other DTP from the PC in QA.. you can Delete it directly from the PC itself.. Goto change mode of the PC and then select the DTP which you want to delete-->then right click and hten Click on Remove Process -->then activate the PC..
Note: You might have authorization to edit the PC in QA then only you will be able to do the changes..

No transfer rules for FI master data sources

Hi all
I didnt get transfer rules for some of the FI master datasources.
0GLACCEXT_T011_HIER
0NEG_POSTNG_TEXT
0ITEMSELFLG_TEXT
When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
*Infosource(transaction data) is not known.
How to resolve this isssue.
Thanks.

Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if any and install the same.
Not all the fields will be mapped with BI info objects. Only necessary ones as defined in BI content will be available for you.
If you feel the mapping is incomplete you can modify the same according to the requirement.
Hope this helps.
Regards,
Rangz

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Want to transfer data from 2 source systems

hi everybody ,
i want to transfer data from 2 source systems into a info cube, how can we do that and i dont want to transfer duplicate data from two source systems. like i have 1,2,3,4 records in one source system and 1,5,6,7 records in the other system.i want to transfer 1,2,3,4,5,6,7 in to the cube. can u help me to solve this problem?

Hi
The solution given by Paolo will not work 100% correct.
Even if you create ODS and with record number as key of ODS the data in ODS will be record no 1,2,3,4,5,6,7
But data of record 1 will be overwritten (first it will hold data from 1st source system and then from 2nd source system) since record number is key. Also you can not differentiate the values of data that means which data is coming from which system.
For this you need to use compouding of infoobjects. In this expample, record number should be compounded with Source system ID infoobject-0soursystem. Then your ODS will contain source system ID along with record number as keys and record 1 will not be overwritten.
Have a look at SDN threads on compounding-
Re: Compounding
Re: Tips on Compounding with Source System ID
Hope it helps
Regards
Pradip
(don't forget points)

Transfer rules for Functional Location hierarchy

Hi
I am trying to install Transfer rules for 0FUNC_LOC_HIER from BI Content.
But i could not find any .
Where do i can find T/Rs or Is there any procedure for that ?
Regards
sateesh

Hi Sateesh,
I am not sure if the hierarchy datasource 0FUNC_LOC_HIER supports the transfer methog PSA,
if it only supports IDoc then its will not have transfer rules that you can maintain. You can
check in table ROOSOURCE in the source system (field transfer method) to see if the datasource supports
PSA transfer methd. If it does then you could create your own transfer rules.
Best Regards,
Des

How to refer field of DataSource in transfer rule for DSO object in BI 7.0

hello Gurus,
I am new to BI 7.
pls tellme how to refer field of DataSource in transfer rule for DSO object.
I will assign points to proper answer.
Praveen.

hi praveen,
when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
hope this will help you.
regards
vaibhav

Two source system in RSA1

Hello All,
I have the following scenario.
I have two source system ECDCLNT200 and ECDCLNT230 and one BI system BIDCLNT200. client 200 is used for configuration and client 230 is used for data loading and validation.now firstly i created source system ECDCLNT230 in RSA1 then it comes under SAP menu but when i try to create ECDCLNT200 in SAP Menu it comes automatically under BI menu. i deleted it and tried again but the same problem is there.
if i remain the same configuration means ECDCLNT200 under BI menu then will it create any problem in future ? or if i want to create ECDCLNT200 under SAP menu what is the otheroption ?
I tried both the way. first i rightclick on main node and selected create source system and second time i right click on SAP and select create source system but couldn't create it.
Please let me know the solution.
Regards,
Komik Shah

Thanks vincent,
i got the solution through SAP note.
I have assigned the points.
Thank you again
Regards,
Komik Shah

Creating two source systems

Hi all,
Can I create two source systems in BW (RSA1) for the same R/3 system? I like to have one for FI and CO, and the other for HR and PY.
Thanks a lot,
Regards
Vic

Hi Roberto,
I need them for the same client.
Regards
Vic

Not getting transfer rules for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL

Hello Bi experts,
Actually i am implementing standard Purchasing module in BI system.
While implementing , i have installed cube 0PUR_C04 with data flow before options.
After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
I am getting transfer rule for 2LIS_02_S011 only.
0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
I will be also very thankful if anybody just give me overview of purchasing.
Thanks,
Sada.

Hello Mani,
Thanks a lot.you are the first one who has answered my que. which i expect .
Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
Cube->Purchasing Groups                                                                                0PUR_C04
           Update Rule->0PUR_C04 2LIS_02_HDR                                                                       AY0XVMCJPXXXXXXXXXXXXXXXX
                                Infosource->Purchasing Data (Document Header Level) as of 2.0B      2LIS_02_HDR
           Update Rule->0PUR_C04 2LIS_02_ITM                                                                         4YSO2PF9XXXXXXXXXXXXXXXXX
                                 INfosource->Purchasing Data (Document Item Level) as of 2.0B          2LIS_02_ITM
           Update Rule->0PUR_C04 2LIS_02_S011                                                                      CSB3FHGQXXXXXXXXXXXXXXXXX
                                 Infosurce->Purchasing groups                                                               2LIS_02_S011
                                                  Transfer Rule->from 2LIS_02_S011 for SC4 Client 600        2LIS_02_S011                  SCXCLNTXXX
                                                                         Datasource->Purchasing groups                    2LIS_02_S011
           Update Rule->0PUR_C04 2LIS_02_SCL                                                                        4ZZ0DMZXXXXXXXXXXXXXXXXXX
                                 Infosource->Pur.Data (Document Schedule Line Level)                         2LIS_02_SCL
Mani i am expecting answer from you.
Thanks,
Sada

Transfer Rules for two Source System in Production

Similar Messages

Maybe you are looking for