Transfer Rules is not Activated in BWQ System

Hey all,
I am transporting the Infocubes from BWD to BWQ. I got an error in "errors occured during post-handling RS_After_Import for ISCS L" and "the errors affect the following components: BW-WHM (Warehouse Management)"
I had assign the "conversion of logical systems names" in BWD and BWQ.
The detailed error can be viewed under this path:
http://h1.ripway.com/aywen/TransferRulesDeactivatedinBWQ.zip
thanks...

Hi,
Just check the connection parameters between BWQ and the source system. If it is ok then Replicate the data sources bfore activating the transfer rules.
Still the problem exists try this functional module in SE38 to activate the transfer rules: RS_TRANSTRU_ACTIVATE_ALL
Hope this will help you.
Rgs,
I.R.K

Similar Messages

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

Hierarchy Transfer Strucutre & Transfer Rules are not transported to QA sys

hai
I have one master data infobject. And i loaded the text , attribute, hierarchy data from Flat file.
I need to transport it QA system . I did it.
But when i checked in QA system. It says that "HIERARCHY TRANSFER STRUCUTRE" is not avaialbel in Qa system .
So how can i transport the "Hierarchy Transfer Strucutre & Transfer Rules" to QA ssytem .
Please tell me
rizwan

transaction SM59 / R/3 connections; you should see your system there.
double click and Test connection.
then menu/test/authorization.
if you have transported stuff already then it is most likely because of your flat file source system.... Ensure that they're defined exactly the same way in your DEV and PROD! Right click this source system and perform a CHECK and/or RESTORE and/or ACTIVATE.
Partner profiles should also be similar. Transaction WE20 / Partner type LS / your flat file sys.
Finally ensure that your prod sys can access your flat file the same than your DEV!
did you already import TRules from with flat file?
hope that helps
Olivier.

CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.

Hello and sorry for my english. My name is Jean-Pierre BRETHES and I have a problem with the creativecloud.exe program which doesn't want anymore to start. (since a while now) The icon in the system tray doesn't appear and it still to be gray (not red). When I clic to lunch the program nothing happen. When I try to reinstall it the download end by a windows "error 50" and everything is stopped.
AT the beginning I wanted to download In design program to try the PAO functionalities. Thank to help me. My email adress is <removed email - kglad>. Have a nice day. JP

Hello and sorry for the delay. Thank you for your answer. I did what you wrote and everything is fine now. Really thank you for that. I fully understood regarding my email address in my message. I will not anymore do this error.
Have a nice day.
Sincerely, Jean-Pierre BRETHES
De : kglad
Envoyé : dimanche 6 juillet 2014 23:33
À : Jean Pierre BRETHES
Objet : CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
created by kglad <https://forums.adobe.com/people/kglad> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/6527054#6527054>

Update rules are not active

update rules are not active when transported to quality.
what can possibly be the error. where to check and correct this issue ?
thanks,
Amit

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

Infoobject 0CEPRCS5 not active in the system

hello all,
When I am trying to install anything from BI Content. I am getting these pop ups:
Infoobject 0CEPRCS5 not active in the system and is being deleted"
And it keeps on going for alot of infoobjects, a few of them being 0CEBQRQM,0CERVSVOL,0CECLSM ...all are starting with 0CE.
I need to hit ok to get through all these pop ups and then my objects continue collecting.
What is this pop up for, is any one else seeing these pop ups?
Thanks,
Kiran

For the sake of discussion, I have the same issue for e.g. 0VKAPPSID and 0VKDLGID, when collecting the not assigned characteristics IOCatalog and the related objects before the data flow.
Davide

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Transfer rules are inactive in BW Production system

The transfer rules are inactive in BW(Production) for the datasource 0FI_GL_4. I tried to activate by executing a program "RS_TRASNSTRU_ACTIVATE_ALL" and another option by moving transport request from Quality to production( I have done the replicate datasource as well). In the quality system the data flow is ok to ODS(0FIGL_O02). but in Production not able to activate the transfer rules. please suggest me the best practice.
Regards,
Leo.

Hi,
Whenever we get such an error, we first need to check the Transfer Rules (TR) in the Administrator Workbench.
Check each rule if they are inactive. If so then Activate the same.
You need to first replicate the relevant data source, by right click on the source system of D/s ->Replicate Datasources.
Now execute the following ABAP Report Program u201CRS_TRANSTRU_ACTIVATE_ALLu201D.
It asks for Source System Name, InfoSource Name, and 2check boxes. For activating only those TR/TS which are set by some lock, we can check the option for u201CLOCKu201D. For activating only those TR/TS which are Inactive, we check for the option for u201COnly
Inactiveu201D.
Once executed it will activate the TR/TS again within that particular InfoSource even though they are already active.
Regards,
Suman

2lis_02_HDR transfer rule is Not Avalibale in BI content

Dear all
I am trying to activate 2lis_02_HDR and other Purchase related Transfer rule in Production system of BI for Production System of ECC ,
I am able to see all those datasourese to other module but not able to find 2lis_02_HDR,2LIS_02_ITM in BI content

my recommendation is first dont activate it in production system, do it in dev then transport it. in ecc you will only fin dthe datasources, whil ein BWD you will have to install its cubes first with the replicated datasource first coming in from R/3..try this link as well
http://help.sap.com/saphelp_sm32/helpdata/en/1d/f4383fdb800804e10000000a114084/frameset.htm

Business Rule Library not activated

Hi, can anyone please tell me what drives the activation of Business Rule library?I am currently working on Consolidation of Investments and I have configured the dimension properties, application parameters as stated in 340.But my businessrules librray is not activated and hence I am not able to define the rules of consolidation.
Edited by: 281642 on Aug 30, 2011 6:32 AM

Hi,
Which business rules have you selected?
The business rules at the appset level are visible only if the automatic adjustment business rule is selected in your application.
Hope this helps.

InfoObject available in Transfer Rule but not PSA

Hi experts,
We require 0COMPANY to be included in our DSO. However, standard DSO and DataSource do not have this InfoObject. What is available is only 0COMP_CODE.
As such, we include 0COMPANY in the DSO which are then made available in the transfer rule. In this transfer rule, we assign 0COMPANY to copy the value from 0COMP_CODE and activate it.
After extraction, we do a check in our PSA. However, we are unable to find 0COMPANY in the PSA. What available is only 0COMP_CODE.
Can I know what is the reason 0COMPANY does not exists in PSA? We have included it in Transfer Rule previously and acticvate it accordingly. As such, records in PSA should show both 0COMP_CODE and 0COMPANY, am I right?
Many thanks.
//Points will be rewarded.

After extraction, we do a check in our PSA. However, we are unable to find 0COMPANY in the PSA. What available is only 0COMP_CODE.
Yes you will be only be able to see fields available in the datasource in PSA like 0COMP_CODE here.
Can I know what is the reason 0COMPANY does not exists in PSA? We have included it in Transfer Rule previously and acticvate it accordingly. As such, records in PSA should show both 0COMP_CODE and 0COMPANY, am I right?
PSA will only show fields available in the datasource.
Check the Cube or DSO - this will show 0COMPANY.
Bear in mind if you use 0COMPANY instead of 0COMP_CODE - Master Data of 0COMPANY will be displayed in the report.
I donot know how different they are.

Exit in the Validation rule is not working in Project system

Hi Team,
I have created a validation rule for wbs and inserted a exit under check condition. But when i trying to test the validation rule, exit is not called. Is there any other step to activate the exit??
Best regards,
Dileep

Hi,
The code you have written in the exit must be activated. Please check the same.
Regards,
Harsh.

Table K9RAAANNNNNNN is not active in the system Message no. K/066

Good Morning SAP Guru's-
I am having an issue during our SAP Upgrade from SP12 to SP18 for my client. While testing creating a billing document via t-code VF01, we received the above issue which resulted in a Syntax error. It appears we are missing a table? Initially, I thought activating the operating concern via KEA0 would be the solution as the same table is found in our sandbox and it works there.
Table RKEAK9R
I am not an COPA expert however I do not understand why or what is the solution to fix this. I found notes in SAP but they did not resolve the issue.
Is there something I need to activate in development or ?
Many thanks!!
Edited by: CharlesMM on Jan 19, 2011 5:08 PM

Hi
This table is created in COPA when you create a derivation step in KEDR using "Derivation rule"... The values that you maintain are maintained in this K9RAA... table...
Ensure if your derivation rules are maintained properly post upgrade and try to regenerate your operating concern from KEA0
Notes 446279 or 148609 may be useful
BR, Ajay M
Edited by: Ajay Maheshwari on Jan 19, 2011 9:58 PM

Updates rules are not active when transported from developmet to quality

Dear friends,
I had made some in changes in strat routine in update rules BW development and saved in request and transported to qaultiy
se09-child request -parent request -
In bw testing I have activated the update rules and saved in different request but I now updates rules not acitve .
Please suggest me where ihave gone wrong ..
Regards
shekar reddy

Hi Sriram,
Download the below documents for reference related to Transports
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/205caa59-a948-2e10-b397-9ccafd3d4f5b
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Regards,
Venkatesh

Transfer Rules is not Activated in BWQ System

Similar Messages

Maybe you are looking for