Transfer rules not activate

hi friends,
I have activate the transfer rules some error araised that is
InfoObject 0CRM_TR is assigned to several fields of data source 0CRM_OPPT_I.
plz give me solution

Hi,
1) R u passing two fields data into 0CRM_TR.Use correct formula or routine to pass the value.
OR
2) Change the mapping of InfoObject 0CRM_TR from the multiple fields. Try to activate TS manually. Otherwise execute the code RS_TRANSTRU_ACTIVATE_ALL in SE38 there u need to give Infosource and Source system name and click on execute. TS will be activated.
Hope this helps,
With Regards,
Siva.

Similar Messages

Activation of transfer Rule not available: Help Sought

Hi All,
I have encountered error in loading data due to
dataSource not having the same status as the source system in the Business Information Warehouse. There is a timestamp difference. The recommended solution in HELP was to replicate the datasource again and activate the transfer rules.... I have done the prescribed replication but have not been succesful in activating the transfer rules. The activate button is disabled. I tried to delete the transfer rule and assigned it again. But still the activate button is disabled?
Thanks! Hope you can help ASAP.
Philips

Hi,
Replicate the datasource first. Then once you are done with that. Run the program RS_TRANSTRU_ACTIVATE_ALL in SE38. You will get a selection screen . Give the Source system name and the infosource name execute. This would activate your transfer rule. We use this in the production enviornment.

Transfer Rules not activating 0PROFIT_CTR_ATTR

Hi,
I am activating Transfer Rules for 0PROFIT_CTR_ATTR from production, it's giving me a error
" Data element for InfoObject WAERS 0OBJ_CURR could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject WAERS 0OBJ_CURR. The data element should be of type CUKY and length 000005. The technical name of the data element is /BIC/OW_######################.
Procedure
Check the log.
Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary. "
Kindly help me.
Regards
Manna Das

Hi,
Dont understand why are you activating the transfer rules in production system directly.
We normally activate objects in development system and transport to quality and production environment.
if you are trying to activate the transfer rules directly then you need to check if all the dependent objects are collected and activated in BI system.
Looking at the error message i feel that curreny field is missing in the transfer rules ... Just read the datasource fields and see if there are any fields missing related to currency.
Regards,
Anup

Transfer rules not activated

Hi Guys,
This is Venkat, unable to activate Transfer rules.It doesnot Showing any errors while activating the Transfer rules and also in the DISPLAY LOGS.But while trying to transfer the field(0crm_guid)from assignInfoobjct-field by using propose transfer rules spindle to Communication str/Transfer rules it was not allow this field to transfer into the transfer rules.After activating it was showing the message Transferstuctute was activated.
could u Pl help me .

Hello Venkat,
you made a detailed description. I just don't know, which transfer rules you mean. Which transaction code you are using?
Regards,
Christian

Transfer Rules not Activating when transported to QAS.

Folks:
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

Folks:
I forgot to mention that the datasource is 0DIVISION_TEXT.
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

Transfer rules not availble in Business content

Hi,
In process of installting Purchasing module related business content I am facing problem with Transfer rules. I have activated all datsources related to Purchasing module in R/3 side and replicated in BW .
Except for 2 datsources all other replicated properly. the datasources 2lis_02_itm and 2lis_02_hdr replicated and are in modified version. why they are not in active verion. can anyone help me in this??
and when i go to business content only infosurce, communication structure are available for this datasources and transfer rules are not available. I tried the option sof delting the datsource and replicating again, activating the source system etc. and replicating it number of times.but nothing worked.
and another issue is when I replicated it didnt propmpt me anythng to selct the option of replciate in 3.x or 7.0 version.
Request anybody's help in this to get the transfer rules.
Thanks,
Kumar.

Hello,
Install the business content for purhcasing properly in BI7.
If you install 2LIS_02_ACC for eg.. you will see... Cube/DSO-Transformation(TRCS)-Infosource-Transformation(RSDS)-datasource.
Sometimes the TRCS or RSDS will be inactive after installing... check the start routine of the transformation and correct accordingly..
Let us know how it goes..
Praveen Tati

Unable to transport transfer rules in BI 7(Partition in PSA)

Hi,
I want to activate T.R in Production but not able to that due to Partition in PSA.
Errors accessing partition parameters for table /BIC/B0000341000 (-> long text)
We used the programmed called RS_TRANSTRU_ACTIVATE_ALL but still the same error.
Even when we transported (T.R) from QA to PRD not able to transport to PRD with error 8.In the error analysis it is giving the same MSG u201CPSA partitionu201D
T.R: Transfer Rules
Object Type: Master data Text(0ACTIONREAS_TXT)
Thanks,
Gattu.
Thanks= Points in SDN

Laxman,
Try to repair PSA table at RSRV --> All Elementary Tests --> PSA Tables --> Consistency Between PSA Partitions and SAP Administration Information##.
After repair try to activate.
If still not working, then empty PSA data in production system (if not required...) and import transfer rules and activate if required.,
Hope it Helps
Srini

Dump when activating transfer rules

Hi All,
             I am trying to create transfer rules and activate from a DB connect source system and I am getting the following error when activating.
Runtime Errors         ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
      activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort"
      for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
Can somebody help me with this error?
Thank you.

BI User
Please check the OSS Notes 914998 and 791549 and see these notes helps
Thnaks
Sat

No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the

Hi friends
when i have trying to transport infocube 0fiar_c03 with infosource 0fi_ar_4 from development client.the following message has shown as error "No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the control table".pl let me know the possible cause of error.
Rgds
Tukuna

dear Tukuna,
it seems the transfer rules not transport.
try in dev, change transfer rules,
and from menu extras (beside go to) -> object directory entry -> transfer rules -> in next screen, check if package/development class is $TMP, click pencil icon, and choose your package/dev class, system will prompt request, create new request and transport.
<b>if package/dev class isn't $TMP</b>, try following,
rsa1->transport connection->left panel choose 'object type' and middle panel 'infosource' and 'select objects', and choose '0fi_ar_4' and 'transfer', then you will see 0fi_ar_4 in right panel, we will use this infosource to collect transfer rules.
you may need to specify the source system assignment in transport connection when collecting objects, click 'source system assignment' and make sure your r/3 source system is marked.
choose collection mode 'manual' and grouping 'in dataflow before', and 'execute', after objects collection finished, expand the infosource and make sure your transfer rules and datasources are there and marked. click transport (truck icon).
also make sure you maintain the source system mapping in TARGET system (QAS), rsa1->tools->source system mapping (tcode rslgmp), fill 'orgsrcsys' with r/3 dev and 'trgsrcsys' with r/3 QAS, do the same for BW Prod with r/3 qas for 'orgsrcsys' and r/3 prod for 'trgsrcsys'.
hope this helps.

Transfer rule Activation failing

hi
I am trying to install the BCT transfer rule and activate it - but it fails saying there is syntax error for an infoobject.
This is the error:
<i>E:Field "L_TEXT" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.</i>
The BW version is 3.5.
Any help would be well rewarded.
thanks
Esan

Hi Esan,
Check oss 913954
Symptom
A syntax error is reported in the transfer rules of some product InfoSources.
For example:
0PR_PURCHASE_CATEG_ATTR,
0PR_BASE_UNIT_ATTR or
0PR_ID_CMP_TEXT
The syntax error occurs in the "two-digit source system" routines for determining the system ID. Error message: E: Field "L_TEXT" unknown.
Other terms
PR_BW, 0PR_PURCHASE_CATEG_ATTR, 0PR_BASE_UNIT_ATTR, 0PR_ID_CMP_TEXT,
PRODUCT, L_TEXT
Reason and Prerequisites
The routine contains the "rs_bct_bupa_form_prod_syst" include but the global DATA statement is missing.
Solution
You must insert two new lines between the following two lines in the affected routines:
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
and
$$ end of global - insert your declaration only before this line -
The new lines are as follows:
DATA: l_s_errorlog TYPE rssm_s_errorlog_int,
l_text TYPE string.
Save the routine.
Jaya

Debug the transfer Rule

Hi,
Please let me know how to but the break point in the Transfer Rule to debug it
Regards,
Mayank

Hi Mayank,
You can simulate debugging in transfer rules or update rules if you have used a PSA.
To simulate debuggin with selective records, load your data target via PSA.
Load the info package till PSA.
In the Details tab, in the monitor of your infopackage/scheduler---> in the details tab-->drill down the messages until you start seeing data package.
When you right click on the message Proceesing of Data package1/2/...n, you will find an option to simulate debug.If you select this option it opens a new window where you could mentione---> activate the debugger in the transfer rule or activate the debugger in the update rule...
Please refer to the SAP help link below for further details or clarification.
[ Debugging transfer rules|http://help.sap.com/saphelp_nw04/helpdata/en/5c/37e03ba722cb5ae10000000a114084/frameset.htm]
In DTP, there is one specific processing mode for debugging and you could switch the debugger at particular break points by checking the relevant checkbox.
Hope this helps,
Best regards,
Sunmit.

Not possible to edit Comm. Structure or Activate transfer rule

Hello Experts,
Do you know what is causing the problem in development box we facing? We are neither able to edit Comm. Structure nor activate transfer rule for myself data mast data sources in BW. Basically, it doesn't let us go in edit mode when we open communication/transfer rule screen on workbench (RSA1). This should be something basic problem but I can not think of anything now? Do you have any suggest about what to check?
Thanks,
Nimesh

I agree, Raj.
Details of what I have repeated (multiple times so far) in system:
Regenerated data source from ODS. Replicated data source to info source and then activated by program Teja suggested (that's where I am having trouble because I can not go to edit mode within transfer structure details screen). I tried loading data with init. request from ODS to Cube and failed with time stamp error of data source.
Issue is still unresolve?
Nimesh

Not able to activate the transfer rule and change the transfer rule plz adv

hello friuends..
i m not able to change my transfer rule . i m getting below msg.
InfoObject 0BASE_UOM of communication structure still being used
Message no. RSAR741
Diagnosis
The deletion of the communication structure for InfoSource 8ZPOS_O13 is not possible. InfoObject 0BASE_UOM of the communication structure is still being used. This use must be undone first.
Concretely the communication structure of an InfoSource can only be deleted if there are no update rules for InfoCubes and no transfer structures for source systems for this InfoSource.
System response
Activity was finished without database change.
Procedure
Check the use of your InfoSource 8ZPOS_O13 in the transfer structures. Delete all existing transfer structures of your InfoSource 8ZPOS_O13.
Check the use of your InfoSource 8ZPOS_O13 in update rules for InfoCubes. Delete all existing update rules for your InfoSource 8ZPOS_O13.
Afterwards, you can delete your communication structure for InfoSource 8ZPOS_O13.
where as i have deleted all update rule for the infosource ZPOS_O13 . but still i m not able to change it .
I have check ed it and it not lock in any req . so please let me know how can i proceed .
Thanks in advance.

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

Transfer rules of export datasource will not activate

We are on BW 3.5
We have an export datasource from an ODS that existed that we are regenerating and ultimately pointing to a different cube. When the transport was created in development, the infosource, transfer rules, transfer structure and communication structure were all on the transport.
When it got to test, the transport got a '12'. The transfer rules said active, but the datasource was not. Runnint RS_TRANSTRU_ACTIVATE_ALL yielded (and still does) the error: "No versioning for PSA table" Error Message: RSAR023
We tried regenerating the export datasource. That took the transfer rule reference out of table RSISOSMAP and made RS_TRANSTRU_ACTIVATE_ALL fail because it couldn't find the transfer rules at all.
We have tried reimporting.
We have tried replicating.
We have tried regenerating.
We have tried sending the datasource replica and datasource.
Nothing is working and it's holding up a large effort underway.
Any thoughts???
Note - we had another ODS with the same situation and we did the same thing and it is active. The only difference is that for the problem export datasource the underlyingn ODS itself was also transported.

Hi,
First transport the ODS and Replica of the datasource to quality. Check whether the ODs and replica 8* object is active.
Replicate them and regenerate them.
Then transport the transfer rules and update rules in the next transport and try activating them.
Thanks,
Arun.

BW3.5: Error message when trying to activate the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN

Transfer rules not activate

Similar Messages

Maybe you are looking for