Transfer Rules not activating 0PROFIT_CTR_ATTR

Hi,
I am activating Transfer Rules for 0PROFIT_CTR_ATTR from production, it's giving me a error
" Data element for InfoObject WAERS 0OBJ_CURR could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject WAERS 0OBJ_CURR. The data element should be of type CUKY and length 000005. The technical name of the data element is /BIC/OW_######################.
Procedure
Check the log.
Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary. "
Kindly help me.
Regards
Manna Das

Hi,
Dont understand why are you activating the transfer rules in production system directly.
We normally activate objects in development system and transport to quality and production environment.
if you are trying to activate the transfer rules directly then you need to check if all the dependent objects are collected and activated in BI system.
Looking at the error message i feel that curreny field is missing in the transfer rules ... Just read the datasource fields and see if there are any fields missing related to currency.
Regards,
Anup

Similar Messages

Transfer rules not activated

Hi Guys,
This is Venkat, unable to activate Transfer rules.It doesnot Showing any errors while activating the Transfer rules and also in the DISPLAY LOGS.But while trying to transfer the field(0crm_guid)from assignInfoobjct-field by using propose transfer rules spindle to Communication str/Transfer rules it was not allow this field to transfer into the transfer rules.After activating it was showing the message Transferstuctute was activated.
could u Pl help me .

Hello Venkat,
you made a detailed description. I just don't know, which transfer rules you mean. Which transaction code you are using?
Regards,
Christian

Transfer Rules not Activating when transported to QAS.

Folks:
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

Folks:
I forgot to mention that the datasource is 0DIVISION_TEXT.
We are on BW 3.5.
I have transported and activated the datasource in BW QAS.
But the Transfer rules are not activated in QAS.
I have transported the info-pakge successfully.
When I try to activate the transfer rules manually in QAS I get the following error message:
You do not have permission to create table /BIC/B0000116000
Message no. DT097
Is there a authorization issue here that is affecting the replication of the datasource?
Thanks
Denny

Activation of transfer Rule not available: Help Sought

Hi All,
I have encountered error in loading data due to
dataSource not having the same status as the source system in the Business Information Warehouse. There is a timestamp difference. The recommended solution in HELP was to replicate the datasource again and activate the transfer rules.... I have done the prescribed replication but have not been succesful in activating the transfer rules. The activate button is disabled. I tried to delete the transfer rule and assigned it again. But still the activate button is disabled?
Thanks! Hope you can help ASAP.
Philips

Hi,
Replicate the datasource first. Then once you are done with that. Run the program RS_TRANSTRU_ACTIVATE_ALL in SE38. You will get a selection screen . Give the Source system name and the infosource name execute. This would activate your transfer rule. We use this in the production enviornment.

Transfer rules not availble in Business content

Hi,
In process of installting Purchasing module related business content I am facing problem with Transfer rules. I have activated all datsources related to Purchasing module in R/3 side and replicated in BW .
Except for 2 datsources all other replicated properly. the datasources 2lis_02_itm and 2lis_02_hdr replicated and are in modified version. why they are not in active verion. can anyone help me in this??
and when i go to business content only infosurce, communication structure are available for this datasources and transfer rules are not available. I tried the option sof delting the datsource and replicating again, activating the source system etc. and replicating it number of times.but nothing worked.
and another issue is when I replicated it didnt propmpt me anythng to selct the option of replciate in 3.x or 7.0 version.
Request anybody's help in this to get the transfer rules.
Thanks,
Kumar.

Hello,
Install the business content for purhcasing properly in BI7.
If you install 2LIS_02_ACC for eg.. you will see... Cube/DSO-Transformation(TRCS)-Infosource-Transformation(RSDS)-datasource.
Sometimes the TRCS or RSDS will be inactive after installing... check the start routine of the transformation and correct accordingly..
Let us know how it goes..
Praveen Tati

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran RS_TRANSTRU_ACTIVATE_ALL program but still in the job log finding some problems like 0BP_RELTYPES_TEXT is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

For 0PS_C02 cube Project System - Dates update rules not activated!!

Hi All,
When we are trying to install update rules from the BI content for PS module for the cube "0PS_C02 Project System - Dates", the
update rules are not activating. under the cube when BI content activation. What is the issue in activating the update rules from BI content. From BI content the available version objects only will be activated i think. Please rectify and resolve the same at the earliest friends.
thanks,
Sakali

Hi,
Try to activate through program RSAU_UPDR_REACTIVATE_ALL.

Transfer Structure not Activated

Table /BIC/B0000879000 must be created in the database
I am getting this error when i try to activate the transfer structure for 0material infosource. everything was fine before i tried to restore the R/3 Source Connection from RSA1 and right click on Source system and select Restore.
Its not activating any Transfer Structure now......Says table must be created....Though it should activate itself.....
I checked it in the ABAP Dictionary .. the table is not there at all....
Somebody please help me...

always the Activate the Source system connection after the Restore...
Once thats done.. then try replicating the DS and activate the TS.. and then proceed with the loads..
Let me know if u get the issue again?
thanks
Vishnu

Transfer rules not activate

hi friends,
I have activate the transfer rules some error araised that is
InfoObject 0CRM_TR is assigned to several fields of data source 0CRM_OPPT_I.
plz give me solution

Hi,
1) R u passing two fields data into 0CRM_TR.Use correct formula or routine to pass the value.
OR
2) Change the mapping of InfoObject 0CRM_TR from the multiple fields. Try to activate TS manually. Otherwise execute the code RS_TRANSTRU_ACTIVATE_ALL in SE38 there u need to give Infosource and Source system name and click on execute. TS will be activated.
Hope this helps,
With Regards,
Siva.

Update rules not active

Actually i installed the 0CDS_C01 AND ,0CDS_C02( Sales Scheduling agreement Processing).when i'm activating the update rules its giving error message like
"IC=0CDS_C02 IS=80CDS_DS07 error when checking the update rules".
whts reason for this? its urgent...
Thanks

the update rules get activated only when all the depenedent bject on
update rules get activated.
so go to object type and select the update rule with before collection and then
activate the same
pls assign points if helpful.

Update rule not activating for Standard BI Content

Dear Reader,
I am unable to activate the BI Content update rule for sales cube. All the key figures listed in the update rule are RED.
How can i fix this?
Please advise.

HI,
This usually happens if if you have added new fields in the cube and if that field is not properly mapped , ie
no mapping being done but it looks like some routine there for that field but we would have not written the routine
just simply routine symbol appears in that case
if you dont have mapping assign it as initial in update rule or map them properly which will resolve your issue.
Thanks,
Arun.

Transfer rules of export datasource will not activate

We are on BW 3.5
We have an export datasource from an ODS that existed that we are regenerating and ultimately pointing to a different cube. When the transport was created in development, the infosource, transfer rules, transfer structure and communication structure were all on the transport.
When it got to test, the transport got a '12'. The transfer rules said active, but the datasource was not. Runnint RS_TRANSTRU_ACTIVATE_ALL yielded (and still does) the error: "No versioning for PSA table" Error Message: RSAR023
We tried regenerating the export datasource. That took the transfer rule reference out of table RSISOSMAP and made RS_TRANSTRU_ACTIVATE_ALL fail because it couldn't find the transfer rules at all.
We have tried reimporting.
We have tried replicating.
We have tried regenerating.
We have tried sending the datasource replica and datasource.
Nothing is working and it's holding up a large effort underway.
Any thoughts???
Note - we had another ODS with the same situation and we did the same thing and it is active. The only difference is that for the problem export datasource the underlyingn ODS itself was also transported.

Hi,
First transport the ODS and Replica of the datasource to quality. Check whether the ODs and replica 8* object is active.
Replicate them and regenerate them.
Then transport the transfer rules and update rules in the next transport and try activating them.
Thanks,
Arun.

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the

Hi friends
when i have trying to transport infocube 0fiar_c03 with infosource 0fi_ar_4 from development client.the following message has shown as error "No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the control table".pl let me know the possible cause of error.
Rgds
Tukuna

dear Tukuna,
it seems the transfer rules not transport.
try in dev, change transfer rules,
and from menu extras (beside go to) -> object directory entry -> transfer rules -> in next screen, check if package/development class is $TMP, click pencil icon, and choose your package/dev class, system will prompt request, create new request and transport.
if package/dev class isn't $TMP, try following,
rsa1->transport connection->left panel choose 'object type' and middle panel 'infosource' and 'select objects', and choose '0fi_ar_4' and 'transfer', then you will see 0fi_ar_4 in right panel, we will use this infosource to collect transfer rules.
you may need to specify the source system assignment in transport connection when collecting objects, click 'source system assignment' and make sure your r/3 source system is marked.
choose collection mode 'manual' and grouping 'in dataflow before', and 'execute', after objects collection finished, expand the infosource and make sure your transfer rules and datasources are there and marked. click transport (truck icon).
also make sure you maintain the source system mapping in TARGET system (QAS), rsa1->tools->source system mapping (tcode rslgmp), fill 'orgsrcsys' with r/3 dev and 'trgsrcsys' with r/3 QAS, do the same for BW Prod with r/3 qas for 'orgsrcsys' and r/3 prod for 'trgsrcsys'.
hope this helps.

Transfer Rules not activating 0PROFIT_CTR_ATTR

Similar Messages

Maybe you are looking for