Transfer Sales Order from client to client

Hi All,
I am trying to transfer sales order from one sap to other sap system.Here i am using ale idoc process.In the system there are some sales orders,i need to transfer that to other system.we configured message type and added out put types as ALE and it is sending idoc to other sap system and it is not creating automatically so in debug mode i can run that and creating sales order.Here i am facing some issues like
1) Condition types like (ZJPR) manual condition type for base and insurance is not transferring,and i can not see in this in outbound idoc.
2) Will it create sales order automatically or do we need run manually.
All valuable suggestions are welcome.if it not a right place then i can move this to ABAP Connectivity.
Regards,
Madhu.

Thanks Madhu -
Could you please Check that your Distribution Model is setup correctly.You should have Message type ORDERS in your sending and receiving System.
Sender System
Receiver System
If Above setting is not reflected in your system then either create New Distribution model or delete message type from existing Model.-----Add New Message Type-----and distribute model from Sender system.
Regards
Amit

Similar Messages

Transfer sales orders from one compnay code to another

Hi
Is it possible to transfer pending sales order from one company code to another? if yes please let me know complete procedure.
thanks
Sanjay

Hi,
You cannot transfer the sales order like this.If your company is getting closed then you can keep a deadline date before which you can close all the open orders and after that you can start creating the orders in the new company code.
If your delivery date is beyond the deadline date then you can reject the sales orders and create them with new G/L accounts from the new company code.
For this,you have to assign your sales organisation to the new company code.
Reward points if it helps.
Regards
Karan

Transfer Sales orders from sap to non sap

Hi,
I want to tranfer the data meaning sales orders from my SAP system to
external system
Has anybody worked on this or any ideas.
Rgds

Hi,
Use orders idoc and IDOC_OUTPUT_ORDERS Function module to sent the sales order data from SAP to other system. Please check you have all the ALE configuration done in your systems.
KR Jaideep,

Transfer of sales orders from one plant to another

Dear all,
My requirement is as follows:
I have created some 500 sales orders (open) in one sales org+plant.
Now due to plant shifting to other area, I want to transfer all the above open sales orders to another sales org+plant.
One option is to create them manually. But that is time consuming and prone to errors.
Second option is to upload thru LSMW. That too is very tedious.
Third option is to extend/assign new plant to the old sales area and change the plant in the orders. But I want in the new sales org + new plant.
Is there any other option by which I can transfer the above sales orders from one plant to another?
Regards
SAPshed

Hi SAPshed,
The problem is not the change of plant, which is standard functionality, but the change of sales organization.
An awful lot of information depends on the Sales Organization: Company code (!!), customers, materials, prices, profit center, etc.
SAP does not even admit creating a sales order in a Sales Organization A with reference to a sales order with a sales organization B.
IMHO your best option is to try to maintain the current Sales Orders with the current Sales Organization and change the Sales Order in VA02 (your third option).
If you are absolutely sure that all materials and customers are created for the new Sales Area in the same way and that prices (discounts) are the same, you might want to do a direct update to VBAK table to change the Sales Organization (nasty!), but be prepared for the consequences (no SAP support in case of problems, you are on your own).
Therefore if you insist on a different Sales Organization, then option 2) will be your best best.
Best Regards,
Franck
P.S. IMHO it is Best Practice to have a unique Sales Organization / Company Code.

Sales orders from one salesorg. to another in same ssystem

Hi Guys,
I got a requirement like we need to convert or recreate sales orders from one sales organization to another sales organization in the same system without having any impact on the existing system.
Any one have idea how to do it and is there any standard program to do this? is there any standard procedure for that>?
Thanks in advance.
Ram sri

Hi Ramgopal,
I never had this scenario, but the main step would be
Define 2 logical systems: a sender and a receiver
Assign one of them to the client
Set up distribution model
Generate partner profiles
Set up converter (not filter!) /Application Link Enabling (ALE)-> Modelling and Implementing Business Processes-> Converting Data Between Sender and Receiver
Here you can set up conversion rule for your sales org field.
All of this step could be done in transaction SALE.
Regards,
Peter

Error V2 005 when creating a sales order from a quotation

I hope someone can come up with some ideas to help me with this error. My client is creating a sales order from a quotation and immediately on the first screen the error V2 005 pops up. The quotation was not created with reference to any previous document, and at this point not sold-to party has even been copied through to the sales order.
To make this error more interesting, this is only happening with 1 particular customer.
I have checked: credit management, customer hierarchies, material determination, customer info records and none of these are in use.
Can someone please come up with some ideas?
Thanks and regards
Kikas

Dear Sai,
Thanks for this note I am going to try it, however I have some concerns because the issue is only happening in production, with 1 custoemr only, and QA is an updated copy of production and I could not replicate the error in QA using the same customer....
If anyone has any other ideas please I would appreciate it
thanks
Kikas

Enable PDF Generation of Sales Order from Opportunity not working

Hi all,
we are trying to enable the PDF Generation for Sales Order from Opportunity.
We´re working on the ERP-HCI Scenario.
We´ve setup the necessarry configurations (chapter 11.3.11) how described in the document:
https://websmp201.sap-ag.de/~sapidb/012002523100002166322015E/1502_SAP_C4C_ERP_HCI.pdf
1. Create Endpoint in ECC for the WS "SalesDocumentPrintPreviewQuery"
After saving the settings we have an calculated enpoint:
/sap/bc/srt/rfc/sap/salesdocumentprintpreviewquery/{SAP-CLIENT}/salesdocumentprintpreviewquery/salesdocumentprintpreviewquery
2. Create a new Communication Arrangement in C4C for the Scenario "Print Preview of Business Documents in SAP Business Suite"
Question to the following Step:
Go to Advanced Settings and enter the URL you have captured from SOAMANAGER in the Create Endpoint section.
Why we use the host and calculated endpoint from the ECC instead of the HCI settings, and maintain in HCI the target host and endpoint?
The Check Service and Check Connection test was successfull.
Finally if we try the scenario from C4C (Customers > {Select a Customer} > Opportunity > Sales Document > {Click the link}
We got a blank new Window, in the C4C UI we get the error "PDF Document could not be retrieved"
In the ECC > SOA Runtime Error Log i get the following Error!?
What´s wrong with our config?
Thanks in advance,
Fabian

There is nothing impossible in SAP. After all there is a code behind everything that we see in SAP screens and transactions and that code can be changed according to our requirement. That has always been m firm belief.
Like I said get hold of your ABAP programmer and write out the spec and he should be able to do it.
Its news for me that you can generate an automatic PO from a GR so if that is possible then why not this.
Its not been attempted before.
Try creating a new Sales doc type and map it to a delivery and see if it works. Much similar to a cash sale and rush order when both docs get generated immediately. Maybe you need to map your copy control criteria too in a way it can be done.Also maybe you need to create a new field called Immediae sales Order like we have an immediate delivery check box in a sales order so that an automatic sales order can be generated when you save a delivery.
Like I said it needs some coding.
regards
Jude

Releasing Sales Orders from SNP to DP at correct levels

We have a requirement where we want to do month to date tracking of sales orders in DP compared with the forecast. We have three important characteristics in DP at which we want the data to be released - Product, Location and Customer. Is there a way to release Sales Order data from SNP to DP at such a detailed level ? A product at a location could have sales orders from multiple customers.

why would you want to send Sales Orders from SNP to DP
Why not load it into DP planning area through a cube in the DW workbench directly
As far as i know you can only trasfer from SNP to DP in Product Location (or similar characterstic Level)
DP to SNP demand transfer can use descriptive characteristics but dont think you can do it in reverse

Error in replication sales order from CRM 5 to ECC 6

Hi,
I am new to the middleware
When I am trying to replicate the sales order from CRM 5 to ECC 6, i found the following error in SMW01 R/3 adapter is called
Message no. CRM_ORDER_MISC024
I am unable to track what may be the problem and even I have checked the SMQ1 & SMQ2 in both CRM and ECC but nil.
Can anybody help me out?
Thanks in advance

Hi Binu,
Try check also the SMQ1 & SMQ2 on R/3 when you start trigger the
document transfer from CRM to ECC. If you cannot see any similar document
appear here, seems like your Middleware filter has not properly set.
Check Middleware filter for document transfer, if I am not mistake, the object
is SALES_DOCUMENT.
Just check, if there filter which block the document to be sent to R/3.
Hope this helps.
Gun.

Error when replicate sales order from crm to r3

Hello Guys,
When I replicate a sales orders from a CRM system to R3 system the system does the following error in the smw01:
queue name: R3AD_SAL_ERR
error1:
Please enter sold-to party or ship-to party
Nº mensagem VP112
error2:
Sales document XXXX was not changed
Nº mensagem V4219
Any idea, why this happens?
Mary

Hello guys,
I have solved my problem by my own.
The problem was in the distribution of partner functions from crm to R3 (spro -> CRM->Basic Functions-> Partner processing->Data Transfer-> distribution of partner functions from crm to R3).
The partner functions assigned to sales orders in R3 was the AG, WE, RE and RG, and in the CRM was SP, SH, BP, PY, the partner functions map wasn't correct
I have had to map the correct partner functions between crm and r3. I have put in CRM the same partners functions that R3.
Best regards
Mary

Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

Hi Experts,
             I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
           I'll get all the required data with field in an excel file.
             Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankar

Hi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
        Enter the Dragon

Uploading open sales orders from sap

hi all,
i need to upload open sales orders from legacy to sap. pls advice what steps need to be followed for the same.
1) how we will we download open sales order from legacy and where..... is it to some flat file or some other option is there . pls tell some options.
2) how we will uload the sales ordes into sap . thru lsmw or is there some other option ?
3) there will be more number of fields in sap than in legacy. i think we need to manully create an excel file and add more fields manually in excel file so that the compulsonry feilds as per sap are present in sap ?
4) how will availability check happen in sap after sales order are t/f from legacy ?
rgds
pamela

hi pamela,
1.a. you need to down load in EXCEL in legact format and convert the same in LSMW format and upload it
2.a. LSMW - Functionally, BDC, BAPI - Technically. to my knowledge LSMW is better option.
3.a. first you download to EXCEL file from LEGACY, then align the same to SAP format you can add those fields that are mandatory as per your requriment.
4.a.You are uploading sales orders in SAP which are showing OPEN status from LEGACY before you uploading the sales orders MM consultant would have uploaded its stock through 561 - dont worry on that, even though if stock is not uploaded also not an issue it will confirm at the later date.
5.a. we have used LSMW process for our PREVIOUS ASSIGNMENT, before that we tested BAPI for it some how it was not capturing some fields.
hope all your queries are solved
balajia

Load Sales Order from Xml file

Hi,
I want to load a sales order from xml file. How can I do so? Where I'll get the xml schema for Sales Order or other documents (delivery,invoice etc)?
Plz reply with code and xml file.

When I'm going to load SO from xml file, it's showing an error:
"The connected value 0 was not found in table Uasge of Nota Fiscal".
What is this table for? Which attribute is related with this table?
How can I find out that?

I want to load a sales order from xml file. How can I do.

Hi,
I want to load a sales order from XML file. How can I do ? how can i create the sales order?
what are the necessary setting for create the sales orders.
with Regards,
Prakesh.

Three options come to my mind.
Option 1: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (BAPI) and Program (CREATEFROMDAT2).
Option 2: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (DINP) and Program (RVINVB10).
Option 3: Translate the xml to IDoc so that ORDER04 / ORDER05 Idoc can be used to create Sales order (WEDI transaction).

How to transfer sales bom from SAP R/3 to APO?

Hi Experts,
I just want to ask how to transfer sales bom from R/3 to APO? if i change my bom usage to 5 and use this BOM in my Production version be enough to send it to APO?
Also, this is my first time using sales bom, could you please help me understand how sales bom work in APO planning?
Thanks so much.
Mylene

Hi Senthil,
Thanks again for your reply. I was trying to CIF sales BOM in APO but only the header material are being created in APO. The component are not added in PDS. This is how I create it in SAP R/3:
1. transaction cs01 --> enter header material, plant and BOM USAGE =5
2. inside cs01, i entered components, quantity for each components and ITEM category = L (stock item)
i also eneterd base quantity for header material
3. create production version for header material with routing and this BOM
4. create and activate material CIF model for header and components
5. create and activate PDS CIF model for header and components.
After doing all these steps, PDS is created in APO but I only have the header material (no components)
I tried changing BOM to other bom usage and components were populated in PDS.
Am i missing nay steps? Thanks.
Regards,
Mylene

Transfer Sales Order from client to client

Similar Messages

Maybe you are looking for