Transfer Status Stop Sign?

Hey, Im trying to transfer some clips from my Cannon Vixia hf10 to Final Cut Express and everything has gone well except a few of the crucial clips have a stop sign next to them when i put them in the que and it will not transfer those clips... is there anything i can do in order to get them into final cut express?

Make sure:
• Your Easy Setup matches your footage specs.
• Your Log and Transfer preferences are set to +Plain Stereo.+ Click the "gear" button in the upper right of the window and choose preferences, then set your audio to plain stereo.
• In the same preferences window, hit the +Clear Logging Autofill Cache+ button.
If all else fails, try trashing your preferences:
http://fcpbook.com/Misc1.html

Similar Messages

MacBook Pro not booting after stop sign appears

Hi,
On Friday I was browsing twitter whilst running photoshop CS5 on my MacBook Pro 13", when safari crashed on me. I tried to close safari normally, but it wasn't responding.
After trying the various ways of closing the program, I was forced to just leave it and hope for the best. I opened photoshop to try and burn some time whilst waiting for safari to respond - unfortunately photoshop proceeded to crash as well. Shortly after CS5 crashing, I stopped being able to input from the keyboard or trackpad clicks. At this point, not even the finder would open , and after some quick research I decided the only thing left to do was to power down the MBP by holding down the power button for a few seconds.
Once it had powered down I left it for a good amount of time (maybe 20-25 mins) and turned it back on again. Everything seemed to be working just fine with the reboot - untill the grey apple logo was replaced with a 'stop sign' above the loading wheel. This sign stays there for hours and nothing happens, and I can't even boot in safe mode either .
One last thing - I bought this MBP from my cousin, and it has had several problems before (such as replacing the hard drive in the apple store) and is under warranty untill october.

Can you boot to the Recovery partition (holding down the Command and R keys while booting)? If so, use Disk Utility to both verify and repair permissions and verify and, if needed, repair the hard drive. If the hard drive can't be repaired, and you're still under warranty, or even if you can't boot into the Recovery partition, make an appointment at your local Apple Store and have them take a look at it. If your cousin didn't transfer the warranty to you (which, the last time I did it, was an arduous task) then have he/her take it in.
Good luck - let us know if you can get to the Recovery partition...
Clinton

TS3276 Mail account set up. Can not receive mail-Everything is green in Connection doctor but when checking activity it shows stop signs. Was able to receive mail until last week then all of a sudden stopped receiving mail but no changes were made.

My mail account has been set up and working to send and receive mail for several months. All of a sudden I can not receive mail. The connection doctor shows all green lights. No changes have been made and nothing has been changed on preferences on IMAP and SMTP. I can send mail. My other accounts all send and receive mail. When you click on activity the list shows stop signs. All accounts show that they are online.

UPDATE:
I deleted all the messages off the server of the offending email address and everything works fine now.

Mac won't start, gives me the kernel stop-sign

Ok, this is my big big problem..
One day, i was just doing nothing on my dear computer, starting up firefox or something, then suddenly everything stopped. I couldn't do anything. I forced-restarted the computer with the boot-button. When im trying to start it over again, i get to the white startup-screen with the apple-icon in the middle, with the loading-circle underneath it. After a while, the apple-icon changes to a grey stop sign (picture of it further down).
So, what have i tried?
Trying to boot with CD, says i can't install Mac OS, but i can go into the Disk utility, Verify Disk / Repair Disk:
Verifying volume "Macintosh HD"
Checking Journaled HFS Plus volume.
Invalid node structure
Invalid B-tree node size
Invalid node structure
Invalid B-tree node size
Volume check failed
Error: Filesystem verify or repair failed.
I have time machine on my external hdd, but when pressing the time machine-button after trying to start with CD, nothing happens.
When starting the computer holding down SHIFT-button, i get a white screen with black text, and a square saying 'You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." The black text in the foreground says:
panic(cpu 0 caller 0x560d25): "Unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1504.9.37/iokit/Kernel/IOPlatformExpert.cpp:1 389
Debugger called: <panic>
Backtrace (CPU 0), Frame: Return Address (4 potential args on stack)
0x508a3da8 : 0x21b510 (0x5d9514 0x508a3ddc 0x223978 0x0)
0x508a3*** : *and the same thing as the other one but with different numbers
0x508a3*** : *and the same thing as the other one but with different numbers
0x508a3*** : *and the same thing as the other one but with different numbers
0x508a3*** : *and the same thing as the other one but with different numbers
0x508a3*** : *and the same thing as the other one but with different numbers
0x508a3*** : *and the same thing as the other one but with different numbers
BSD process name corresponding to current thread: Unknown
Mac OS version:
Not yet set
Kernel version
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System uptime in nanoseconds: 368530813
The Apple stop sign:
http://a248.e.akamai.net/7/248/51/1068051125396238/www.info.apple.com/images/kba se/106464/106464_1.gif
Ok, so i cant boot the computer with the shift key, just gives me bad error message. Nothing particular is happening while booting with the X-button and i've tried to reset PRAM.
I really don't know what to do... and my computer is from 2009, has worked pretty good (until now), and i dont have any warranty...
EDIT:
I've also tried to boot it with holding down cmd-s, and i just get a repeated message saying alot of stuff...
"rooting via boot-uuid from /chosen: ******* (alot of numbers and letters)
waitingon <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResou rceMatch</key><stringID"2>boot-uid-media</string></dict>
Got bootdevice =IOService:/AppleACPIPlatformExpert/PC10@0(AppleACPIPCI/SATA@B/AppleMCP79AHCI/P RT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorage Drivers/ST9320423ASGMedia/IOGUIDPartitionScheme/Customer02
BSD root: disk0s2, major 14, minor 2
hfs_swap_BTNode: record ¤0 invalid offset (0x0031)
hfs: node=0 fileID=4 volume= device=root_device
hfs_mountroot failed: 5
cannot mount root, errno= 19"
Something like that.....

There is this Apple Knowledge Base article, which describes your issue:
http://support.apple.com/kb/TS1892?viewlocale=en_US
However, it sounds as though you have tried most of what's there. If it won't allow you to reinstall the OS, then there is definitely something amiss with your hard drive.
Sometimes a third-party disk utility (such as Drive Genius) can repair a drive when Apple's own Disk Utility cannot.
Good luck with it.

R&R Queue Demon is hanging in status STOPPING

Hi folks,
I'm currently facing a problem I don't seem to cope with so I hope you may be able to help me. Here we go:
I implemented the SAP CRM Groupware Integration into a CRM 5.0 SP6 system. At first it worked quite well.
But today I encountered a problem with the R&R Queue Demon (tranaction SMOHQUEUE):
I wanted to stop and restart the demon by hitting the corresponding buttons "stop queue demon" and then "start queue demon". But I did not get that far.
Once I pressed "stop queue demon" and then the "refresh" button, the queue demon seems to be stuck in status STOPPING. And I don't seem to find a way to get the demon into status HOLD in order to be able to start it once again. It does not react to my input (i.e. pressing the two buttons I mentioned above).
So when I press "stop queue demon", it says "stopping queue demon successful. press refresh", but when I press "refresh", it's still in status STOPPING.
And when I press "start queue demon", it says "starting queue demon not necessary. already started." which is unfortunately not reflected in the status of the queue demon.
So what can I do to get the demon into status RUNNING again? Is there a way to reset the demon without having to restart the entire server?
Thank you in advance for you help!
best regards
Alex

Hi all,
I was able to solve this problem by deleting a lock entry (transaction SM12) in client 000 which seemed to have blocked the queue demon as described above. After deleting this entry the queue demon switched back to status HOLD and could be restarted immediately. Now it's running again.
But usually you should not delete any lock entries without knowing exactly what it's all about.
I hope this is helpful for others facing the same problem.
regards
Alex

Can't boot on my external hard drive on another Mac (stop sign)

Hi,
My system is placed on an external SSD connected to my iMac.
I've just bought a brand new Mac Mini and I wish to boot it using my SSD.
When I pick it up in the startup alternatives list (maintening the "Alt" key pressed during the boot), I just get a gray screen with a stop sign at the middle. Then the Mini shuts down.
Isn't it possible at all to use the same boot disk on my iMac and on my Mini ? (I don't intend to use it constantly on both, I was just hoping to migrate flawlessly using the same System disk).
Note :
- when I plug it back to my iMac, the iMac boots up normally
- if I boot my Mac Mini using the internal hard drive, I can access to all the content of my SSD. I performed a full disk check on it using the Disk Utility and everything's fine. I just can't boot with it.
- of course, both of the systems (iMac/SSD and Mac Mini internal HDD) are up-to-date (10.8.2)
Thanks for your help.

Most likely, the new mini can't boot with the iMac's components. See Don't install a version of Mac OS X earlier than what came with your Mac and Computer-specific Mac OS X releases for details.

MacBook Pro unable to boot up [Stop Sign], after rEFIt Installation

I was trying to install Windows on my MacBook Pro, Intel Based.
Followed this tutorial, http://riactant.wordpress.com/2009/02/25/install-windows-on-boot-camp-using-exte rnal-usb-optical-drive/
Downloaded and installed rEFIt and rebooted my MacBook Twice.
After rebooting twice, my MacBook no longer boots up.
It will stay at the apple logo until it turns into a stop sign, a circle with a slash across.
I have searched desperately for a method but came to no conclusion.
When i did command + s, It keeps saying "Searching for root device", or something along that line.
When I tried to boot from my Installation disc while holding down C.
I went into Disk Utility and my Mac HD was renamed to disk0s2.
I am very afraid that my data will be lost, all my freelance invoices and work will be gone.
I am unable to go into safe mode.
I am VERY sure this happened immediately after I installed rEFIt.
If only there's a way for me to somehow restore to the moment before I installed this software.

If you've never backed anything up because you weren't expecting to need backups, you would have lost all your data sooner or later no matter what else you did. Fooling unnecessarily with rEFIt just brought it about a little sooner.
Replace your hard drive before messing around with it any more. Once you get a new drive installed and your machine back up and running, mount the old one in an external enclosure and see whether data recovery software can salvage any of your files.
Data Rescue: http://www.prosofteng.com/products/data_rescue.php
FileSalvage: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
Both utilities are offered in demo versions that will show you what the full version could recover before you have to pay for anything.

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

When i try to play Music or a video the volume comes up with full bars and a stop sign, how do i get back my volume?

When i try to play a music or video or anything the volume bars come up full but with a stop sign underneath, i don't know how to get back my sound.

The way that usually works best is to move the entire iTunes folder folder from the current location to X:\iTunes where X: is the letter of the external drive.
If you moved the iTunes Media folder "by hand" instead of using iTunes to relocate the media folder then:
Move the main iTunes folder to X:\iTunes
Move iTunes Media inside it as X:\iTunes\iTunes Media
Press and hold down the shift key as you click the icon to start iTunes
Keep holding until asked to choose or create a library.
(If iTunes opens normally/with an empty library close it and go back to step 3)
Click choose and open X:\iTunes\iTunes Library.itl.
If you still have a problem try my script FindTracks.
tt2

Stop sign in the start process of process chain

Hi Team,
We are seeing a 'stop sign' in the Start process of a 'Process Chain'. Normally there's a green tick. Any idea why ? We did manually post a day's data.
Thanks,
R T

option 1. right click and display all jobs. If you see two released jobs, delete one of them. Also check the validity on the user-id of the scheduled job.
option 2. activate & schedule the pc again. If it still shows red stop. right click & get more info from the message long text. May be the start process is deleted somehow.
Kumar Gudiseva.

After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message: "DAVE Networking Dave kernel extensions could not be loaded! Error 71 - Too many levels of remote in path."

After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message:
"DAVE Networking
Dave kernel extensions could not be loaded! Error
71 - Too many levels of remote in path."
I have uninstalled DAVE and used Clean App to remove trace elements of program, however I still get the message and am unable to eliminate the error messages. When I click OK the message goes away briefly and then comes back up.
Any solutions would be great.

Dave,
Thanks....What I did was load the free eval version of Dave 9.0 and then used the uninstaller which must have deleted the kernel giving me the problem.
Thanks for the response.
Razor

Impossible to stop signing into AIM on 1.4.1.1

Hi,
I seem to have a similar issue as reported by some in 1.3.1 ("Upon trying to add the AIM account, the spinner just kept going on signing in."). While I do see my contacts and can chat on the Pre with AIM, there is no option to sign out because it never stops signing in.
This is very annoying while I am at my computer. Please tell me there is a fix coming soon or I will have to disable AIM, which is not cool.
Thanks,
Adam

1) For the first time which you are login with Microsoft Account, you will need Internet Connect to authenticate your access , however once you successfully logged in with Microsoft Account once, then you could login with same account even without internet
connection. However if you change your password for Microsoft Account it only effect when you connect to internet.
2) You don't need to switch your account, you just need to login with Microsoft Account only for Store and then install your Apps while you are using your local account.

Wont boot - Stop sign at boot

Hi!.
I have a iMac G5 "20 2.0 GHz Intel, and when i boot does just a Stop Sign up.
Ive tried to use Disk Utility and boot form SL disk and i wont reinstall due to very inportant files that is not backuped (Family pictures and family videos).
Post if you have a solution or you need some more details!.
Plz post ASAP
-- Guru IPB

You have, as you say, an intel Mac, but are posting on the G5 Mac page. I will ask that your post be moved.
Try using Disk Utility to repair your drive:
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.

Booting the compute: It wants to start then the screen get a big red stop sign and will not finish booting

I turn on the computere. It starts to boot I get the apple logo in the center of the screen. Then I get a red stop sign in the middle of the screen. The small wheel is still turing but the computer will not start.

Start your iMac with the original DVD that came with the computer then run disk utility on the hard drive to repair it, also repair your permissions.

Hyper-v virtual machine management in status stopping

Hello,
I had a problem with one vm showing status backing up.
I read on TechNet that restarting the hyper-v virtual machine management service would solve the problem.
I have tried to shutdown the service but it now says status stopping...
How long time does it take to shutdown the service? Is there anything I can do to hurry it up?
ps. I have production vm running on the host that I can't take down...
Regards
Roger

Hi Roger,
I also tested in my lab to disable that service forcibly ,then I found that it will leads the VMs to unexpected shutdown .
Based on this ,it seems that restarting the host is necessary .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Transfer Status Stop Sign?

Similar Messages

Maybe you are looking for