Transfer stock from Storage Location to Bin

Dear All,
what is the procedure to transfer stock from Storage Location to Bin ( T.Code and Mov.Type)
waiting for your Reply
with best regards
Suman

Dear Kiran
Thnaks for your reply
Im doing Process as below...
T.Code:LT01
click on Transfer Order ( Header) select WITHOUT REFERENCE
WHNO: CWH
MOV.TYPE:999
MATL:
QTY:PLANT:
S/L
NEXT SCREEN
DESTINATION
ST.TYPE:
STORAGE SEC:
BIN NO:
AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
"CANNOT FIND SOURCE STORAGE BIN"
AFTER THAT IF I ENTERED
FROM
ST.TYPE:
STORAGE SEC:
BIN NO:
THEN SYSTEM GIVES ERROR MESSAGE
STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
PL. CORRECT IF IM WRONG
with best regards
Suman

Similar Messages

Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

Transfer posting from storage to storage locn

Dear All,
I understand we can do the transfer posting from storage location to storage location through Mvt type 311.
The scenario is I have to transfer the goods from Storgae locn 1 unrestricted to storage locn 2 quality inspection.
Kindly let me know if it is possible.

Hi,
There is no direct movement type. You have to do this in 2 steps. 1st with 311 for St.Loc-St.Loc then 322 for Unrestr to QI.
Hope it helps
Shiva

Stock Transfer between 2 Storage locations

Dear All
I want to configure Stock Transfer between 2 Storage locations.
I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
Regards
Vaibhav Mahajan
Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

Hi
Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants doc type UB), just goto MIGO
There are 2 options are there for Stock Transfer between 2 Storage locations
1. one step procedure movement type 311(from unrestricted to unrestricted)
323(from quality to quality)
325(from blocked to blocked)
2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
During this transfer no accounting document will generate because you are transferrring the stock within the plant,
Thanks

Transfer posting value limit from storage location to location

Dear Experts,
1. Is there any option to restrict the stock value that can be transfer-posted between storage locations ?
2. Any option to limit the maximum stock value a storage location can hold ?
Thanks

Dear All,
Thank you for valued feedback.
1. I was aware of the fact that stock is valued at plant level and it was not possible in standard. I was looking if anyone has done any innovative solution for this requirement.
2. Jürgen L - Thanks for the user exit, I was checking this yesterday and thought of check the Quantity in SLoc * Material Price to check the value before posting.
3.Joshua Albert - I had already configured EWS but business is not happy as there is no restriction only an exception email.
The issue is we are have a sales channel, where we created each Saleman as Storage Location and Transfer the stock to Salesman Storage Location and they do door to door selling to retail outlets and then after 2 days they come back with actual sales invoices which are recognized as sales which is consumed from their Sloc and again stock in transferred to their location, but there is no control on this.
I looked at changing the solution to customer consignment with credit management but credit management doesn't work for consignment fill up.
4. Sangeeta Khurana - Could you please give me more info on wht you hve suggested, was not very clear.
Thanks!

Transfer stock from RA01 to a particular BIN

Dear All,
Can anybody tell me how to to update BIN stock.
I have stock in RA01 location. and BIN is showing empty.
Thanks in advance
Shuva

I am working in SAP last 2yrs as support(logistics).In our company its usingLean WMS.
I have the knowledge of configuration and trying to do WMS in IDES server using a help doc.
Can u tel me the difference of interim BIN and only BIN......
thanks
Shuva

How can we transfer stock from one vendor to another vendor?

Dear Gurus,
How can we transfer stock from one vendor to another vendor?
pls tell the steps to follow..
Thanks..

This is the Normal Third Party Sub Contracting
Follow these steps
If components to be provided to a vendor are supplied not by your company but by a third-party, you can order the components from the third-party and specify the subcontractor in the purchase order as the delivery address. At goods receipt the components are posted directly to the stock of the material provided to vendor.
Entering a Purchase Order for Components
To order components for a subcontract order from a vendor and have them delivered direct to the subcontractor, enter a standard purchase order with a different delivery address:
From the Purchasing menu, choose Purchase order ® Create ® Vendor known.
Maintain the data on the initial screen. Make sure you enter the vendor of the components and the plant concerned.
Enter the items.
Then choose Item ® More functions ® Delivery address.
A dialog box appears in which you enter the delivery address.
In the field Vendor enter the number of the subcontractor and select the SC vendor box.
Selecting the box causes the components at goods receipt to be posted directly to the stock of the material provided to vendor when the goods receipt is posted.
Save the purchase order.
Posting the Goods Receipt of the Components
If the subcontractor lets you know that the components have arrived, you can enter the goods receipt for the purchase order. The components are posted directly to the stock of the material provided to vendor.
Stock Update
A goods receipt posting has the following results in the system:
the stock of material provided to vendor at plant level is increased. The stock of material provided to vendor is not managed at storage location level, since the stock is no longer stored at your company.
Valuated stock at plant level increases.
Documents
An accounting document is created for the material document.
After this normal subcontracting order for finished product.

What are the list of .stock by storage location

hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.

Dear Radha Krishna,
You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
Go through standard Reports:
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Tables:
MKPF Header: Material Document
MSEG Document Segment: Material
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
SBSE Stock Mngmt Levels for Inventory Sampling
SKPF Header Data: Inventory Sampling
SLGH Elements of Stock Population
SSCH Strata of Inventory Sampling
T156 Movement Type
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
MSKU Special Stocks with Customer
MSKUH Special Stocks at Customer: History
MSLB Special Stocks with Vendor
MSLBH Special Stocks at Vendor: History
MSPR Project Stock
MSPRH Project Stock: History
MSSAH Total Sales Order Stocks: History
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
MSSQH Total Project Stocks: History
http://goldenink.com/abap/files_in_sap.html
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen.

Negative stock for storage location M7 021

Hello
I use negative stock for some materials
When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA: 24000641 XXXX 9999 YYYYYYY
This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
I set - allowed negative stock in material master data MM02 and for plant in WB02
Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
Could You help me?
Thank You in advance
Arek

Go to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
If use ful award points

Any delivery note can be created if transfer materil in storage location

hi
any delivery note can be created if transfer material between storage location in the same plant. Or can i do the GR for that

Hi,
This might help you.
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators:
E, K, M, Q
See also 321, 343, 349, and 455 for other stock types
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
None
315 Transfer posting storage location to storage location in two steps - placement in storage
In the receiving storage location, the quantity is transferred from the stock in transfer to the unrestricted-use stock.
Possible special stock indicators:
None
Reward points if useful
Regards,
Amrish Purohit

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Valuated Stocks at Storage location Level

Hi Gurus,
Our client wants to develop a report on Quantity and Value of the Stocks at Storage location level. Is there any standard table/T.code where we can see this? We have tried in the Standard reports too.
We have tried this getting from various tables like MARA,MARC,MARD,s031 & S032. But it is hitting the performance heavily. Please advice if anything can be done on this.
with regards,
Saakithyan

Refer this link
http://wiki.sdn.sap.com/wiki/display/ERPSCM/StockTablesandStockTypes
check reports: MC.9 ,S_p00_07000139 also if it fits

Transfer posting between storage location

Hi
2 questions: we are going to create a new storage location to make material movements:
1- We have to move stock between storage location.
Storage A(new): without WM
Storage B: under WM.
We would like to know wich is the best practice to do the transfer: MB1B? 301/311 movement type?
2 - If we decided to create a new storage location with WM. Wich are the recomendations or the points we have to consider:
Under the same Warehouse numer? A knew storage type? Wich are the activities in SPRo?
Thanks in advance for the help
Regards
Enzo

http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
If it is the same physical Warehouse you could use the same Warehouse, otherwise a new or no Warehouse.
If the Storage Locations are near by and stock doesn't cross public roads and it's manually initiated, suggest just use a one step as it's the simplest process.
If there's a significant distance but on-site use two-step or if stock transferred by public roads, use STO.

Authorization Control for Transfer Posting's Storage Location

Dear Gurus,
Hi ! May I know is that SAP has any Authorization Object to control Transfer Posting (SAP R3 4.0B) ?
Let say in MB1B I only allow certain user to do transfer posting with P230 storage location, how should I control it ? With Authorization Profile?
I had tried remove all storage location P230 authorization M_MSEG_LGO from those user who are not allow to use, but sad to say that most of the user who allow to use transaction MB1B also able to do good receipt or transfer posting with storage location P230.
I had check those user's profile, actually in their authorization, there could not get P230 in their M_MSEG_LGO authorization object.
Thank you!
Warm regards

Hi,
I did not tried OLMB before, but I couldn't get the option you ask me to click.
Please refer to the screen, is it the Basis Administration is what you mention lately?
[http://www.pikipimp.com/pp/pimped_photo/s/image/40/552/543/OLMB-compiled.JPG?ts=1232093107390]
I had assign the storage location P230 to the authorize users, but the problem now was those unauthorized users also can use the storage location P230 to do Transfer Posting (MB1B) although I did not assign to them in PFCG.
Thank you.
Warm regards.

RE: Transferring stock from storage type A to storage type B

what movement can I used in WMS to move stock from storage type A to storage type B for replenishment?
Bye

Hi ..
I think for replenishments standard movement type is 319 .
You need to assign storage type with this movement type.
Run Lp22 or Lp24 to generate replenishment .
If its one time activity you can use LT10 with movement 999 to transfer from one storage type to another.
Hope it helps
Jinoy

Transfer stock from Storage Location to Bin

Similar Messages

Maybe you are looking for