Transfer stock through UD

dear guru,
i have set inspection origin 06 for return goods from customers,
my lot is created, i have recorded results also, after that when
i go for UD decision for that inspection lot, there is no tab for
Stock tranfer.(in qa11)
please help me out
points will be rewarded
Regards
Pravin

hi
inspection type 06 is not stock relevant ,hence you will not find the stock transfer page.
Processing materials as non-stock-relevant goods
If a material is not stock relevant, the system does not valuate and track the quantity of goods in an inspection lot. All inspection lots with the following inspection lot origins are not stock relevant:
·        02 - Goods issue
·        03 - Production
·        06 - Return from customer
·        07 - Audit
·        10 - Delivery to customer with sales order
·        11 - Delivery to customer without sales order
·        12 - Delivery (general)
·        13 - Production inspection on basis of run schedule header
·        14 - Plant maintenance
·        17 – Externally triggered inspection
regards
thyagarajan

Similar Messages

  • Transfer posting to block stock through quality notification

    Dear QM Experts,
    I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
    1.     Material is batch managed
    2.     Storage location is managed by warehouse management and has storage bin.
    3.     Material has split valuation
    When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
    On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
    Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
    I would be grateful, if someone can throw some light on this.
    Thanking you,
    Anand Rao

    Which valuation category do you use in material master accounting view?
    In my experience..
    Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
    Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
    Anyway try below..
    At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
    I'm not sure why your batch master does not have a valuation type.
    Regards
    Luke

  • Transfer Stock to subcontractor with reference of Sales order

    Hi,
    Scenario:
    MTO strategy
    We have one operation is subcontracting. When we take MRP run all PurReq. & PLOrd are reference to sales order. But  when we want to transfer material to subcontractor through TCode MB1B Mvt type 541 that time system issue the following message.
    Deficit of SL Unrestricted-use 3,150 KG : 119 1002 RM
    Then we have to transfer stock reserved against sale order to unrestricted.
    Requirement:
    Can we transfer stock to subcontractor with reference to sales order.
    Pl tell me how I resolved this issue.
    Thanks & Regards
    Dhamane

    Hello....
    You can not transfer material from Sales order Stock by movement type 541 as both stocks are Special stocks &  has not recommend to transfer between two special stocks.
    For this Solution ,  Transfer posting to transfer the provided components to a new storage location (for example, 9999) by using movement type 311. This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
    Rajiv

  • How can we transfer stock from one vendor to another vendor?

    Dear Gurus,
    How can we transfer stock from one vendor to another vendor?
    pls tell the steps to follow..
    Thanks..

    This is the Normal Third Party Sub Contracting
    Follow these steps
    If components to be provided to a vendor are supplied not by your company but by a third-party, you can order the components from the third-party and specify the subcontractor in the purchase order as the delivery address. At goods receipt the components are posted directly to the stock of the material provided to vendor.
    Entering a Purchase Order for Components
    To order components for a subcontract order from a vendor and have them delivered direct to the subcontractor, enter a standard purchase order with a different delivery address:
    From the Purchasing menu, choose Purchase order ® Create ® Vendor known.
    Maintain the data on the initial screen. Make sure you enter the vendor of the components and the plant concerned.
    Enter the items.
    Then choose Item ® More functions ® Delivery address.
    A dialog box appears in which you enter the delivery address.
    In the field Vendor enter the number of the subcontractor and select the SC vendor box.
    Selecting the box causes the components at goods receipt to be posted directly to the stock of the material provided to vendor when the goods receipt is posted.
    Save the purchase order.
    Posting the Goods Receipt of the Components
    If the subcontractor lets you know that the components have arrived, you can enter the goods receipt for the purchase order. The components are posted directly to the stock of the material provided to vendor.
    Stock Update
    A goods receipt posting has the following results in the system:
    the stock of material provided to vendor at plant level is increased. The stock of material provided to vendor is not managed at storage location level, since the stock is no longer stored at your company.
    Valuated stock at plant level increases.
    Documents
    An accounting document is created for the material document.
    After this normal subcontracting order for finished product.

  • I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices

    I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,

    Hi jhyiesla,
    Im not sure wether I got you right or not. But my advice/s would be as follows:
    These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
    1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
    2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
    3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
    4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
    5) now you can empty your trash on your mac.
    Further,
    - You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
    - If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
    jl

  • I want to transfer data through the serial port in the same coding that hyperterminal uses. How can i do it?

    The serial port seems to be working, and labview seems to be sending the data, but the problem is in which format does it send the data, because in hyperterminal i just input the string "JDX" and it sends it to my device, with labview it sends something but my device does not recognize it.

    nobuto wrote:
    > I want to transfer data through the serial port in the same coding
    > that hyperterminal uses. How can i do it?
    >
    > The serial port seems to be working, and labview seems to be sending
    > the data, but the problem is in which format does it send the data,
    > because in hyperterminal i just input the string "JDX" and it sends it
    > to my device, with labview it sends something but my device does not
    > recognize it.
    Hyperterminal adds the carriage return/line feed to the string which is
    generated by the return key to send out the current line. LabVIEW simply
    sends out what you tell it, so try to set the string to "Show \ Display"
    format and add a \r or \n or \r\n to the command you want to send out.
    Assumes of course that you set the right baudr
    ate/bits/parity etc in
    LabVIEW with the VISA property node, when opening the serial port.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Can i transfer stock with transfer order in Inventory management?

    Can i transfer stock with transfer order in Inventory management between two storage locations in the same plant?

    I hope you are referring a transfer order and the transfer between two storage locations connected to the same warehouse, and just not doing movement at IM level with a transfer order.
    But, if you are referring to making a bin-bin transfer within the warehosue and you want to influence the storage location to storage location automatically, yes, you can do this. You should use 'storage location control' configuration under WM-IM interface to drive this. Essentially, you need to maintain the warehouse, destiantion storage type, plant, destination storage location and movement type 311. When you perform the transfer order confirmation to move inventory from a storage type (inventory is under source storage location) to the destination storage type (per the configuration setting) there will be an automatic transfer posting made to move inventory at IM level from source to desintation storage location.

  • I need to transfer information through firewire cable and could not remember how it works, please, help

    Please help, I need urgently to transfer information through firewire cable and I could not remember how it was that I do it. I've connected the computers and restarted one of them by pushing T on startup but it did not work.

    Shut down both Macs.  Connect them via FW cable.
    On the Mac you want to copy FROM.  Start up but make sure you are holding down the T key as soon as you press the power button.  And keep holding down the T key until the FireWire emblem appears on the screen - that's the indicator that the Mac is in Target Disk Mode (TDM).  Note: if you release the T key too soon the Mac won't go into Target Disk Mode.
    Start up the second Mac.  The first Mac will appear in the Finder as a disk.  You can use the Finder to copy whatever you want from the Mac that's in TDM.
    When you're done, shut down both Macs.  The Mac that's in Target Disk Mode can be shut down by holding down the power button until it turns off.

  • How to transfer stock from sample usage to  unrestricted use

    Dear  sir
    how to transfer stock from sample usage to  unrestricted use

    I suppose user has accidently posted quantity to sample usage?
    Do you see material document with movement type 333 for this material?
    You can search material document list using MB51 transaction
    or If you know the inspection lot, You can list material documents list from inspection lot.
    If you can find the material document number -->Use MBST transaction to reverse the movement
    If you can not find material document --> use Mb1C transaction use movement type 561.
    In either case stock can not be return to same inspection lot. You can activate another inspection lot using inspection type 05 if needed.
    Hope this helps.

  • RE: Material in stock through IW31

    Hello All,
    My client has the requirement that all goods purchased must first enter their centralized store. In IW31, when we create an order for a component though item category N, the material is consumed directly at time of GR. The only exception being for material type UNBW. However the problem with UNBW is that there is no stock valuation update available. Our client would like to have valuation too.
    Is there any other material type that may fulfil their requirement.
    Is it possible at all to receive material into stock through IW31. We really dont want to go into using item category L and then go thorugh MRP runs.
    I would like to know if you have been able to do this through item category N.
    Thanks for reading this.
    Regards,
    Soumyadeep

    I wonder if it makes any sense to have materials not relevant to inventory (N) and non-valuated, which would be the purpose of managing such materials ?

  • Transfer data through bdc using as01 tr. code

    hi gurus,
    please tell me transfer data through bdc using as01 tr. code.please guide me through coading how to i will proceed.i am using call tr. through recording.
    thanks
    subhasis

    Subhasis,
    Best way to Convert data to AS01 is to Use BAPI BAPI_FIXEDASSET_CREATE.
    Trouble free and easy conversion.
    Hope this helps.
    Vinodh Balakrishnan

  • Populate Tax Code in RKWA table while doing transfer posting through MIGO.

    Hi All,
    I have a requirement where for certain countries i have to pass the tax code to RKWA table while doing Transfer posting through MIGO transaction.
    For certain countries which i have to pass the Tax code to RKWA table, basically will not be having the tax code. For this reason im looking for BADi/User exits where i can update the RKWA table with the tax code. If the tax code is not derived, im getting the error as 'No tax information found'.
    Please suggest if any BADi/exits are available for this requirement.
    Regards,
    Santosh

    Check the following SAP notes:
    139176
    579241
    Regards,
    Indranil

  • Transfer stock from Storage Location to Bin

    Dear All,
    what is the procedure to transfer stock from Storage Location to  Bin  ( T.Code and Mov.Type)
    waiting for your Reply
    with best regards
    Suman

    Dear Kiran
    Thnaks for your reply
    Im doing Process as below...
    T.Code:LT01
    click on Transfer Order ( Header)  select WITHOUT REFERENCE
    WHNO: CWH
    MOV.TYPE:999
    MATL:
    QTY:PLANT:
    S/L
    NEXT SCREEN
    DESTINATION
    ST.TYPE:
    STORAGE SEC:
    BIN NO:
    AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
    "CANNOT FIND SOURCE STORAGE BIN"
    AFTER THAT IF I ENTERED 
    FROM
    ST.TYPE:
    STORAGE SEC:
    BIN NO:
    THEN SYSTEM GIVES ERROR MESSAGE
    STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
    EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
    PL. CORRECT IF IM WRONG 
    with best regards
    Suman

  • How do I transfer photos through Bluetooth from iPhone to iPhone ?

    How do I transfer photos through Bluetooth from iPhone to iPhone ?

    Hi Soorya3d,
    Thanks for visiting Apple Support Communities.
    If both iPhones meet the requirements, you can use AirDrop to wirelessly transfer files between them. See this article for the requirements and steps to use AirDrop:
    iOS: Use AirDrop to wirelessly share content
    http://support.apple.com/kb/ht5887
    All the best,
    Jeremy

  • I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

    The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
    Matt

Maybe you are looking for