Transfer Structure Status - Clock Symbol

I have data in my ODS and have moved that data to the cube. I have lost some of that data in the cube because of a delete of overlapping conditions. I need to get that data back into the cube from the ODS. I was going to load it from the ODS, but when I did, it only loaded a small portion of the packages from the ODS. The reason is because after our ERP upgrade, we had to activate the InfoSource. Now when you look at the Reconstruct tab in the ODS, the normal double green check marks have now been replaced with one check mark and a clock symbol. It appears this data cannot be recovered. Does anyone know if it is possible to recover this data and be able to move it to the cube.
Thanks, Keith J

Hi Keith,
When ever there is change to transfer structure in re construction tab we will get that clock symbol. In your case as you are loading data from ODS to CUBE , from your first load from ODS to recent load there is change in your ODS object structure,that is the reason u are seeing clock symbol.if u are trying to reconstruct your requests it will pop up a message stating that to ignore the request click no,I think it will upload that request again,if not do an init load from ODS again and schedule your deltas regularly
Regards
KK

Similar Messages

"Transfer structure is not yet active" in each variant of a process chain

I run a big process chain in test environment that I had never run before, but find almost every variant of the process chain show the red error, when I right click the red color variant, get the msg at the status bar that says "Transfer structure is not yet active". Is there a way that can do the mass activation of all master data attributes?
Thanks

Hi I have the same error message
When I intend running the program to Activate Transfer Structures I get the following error messages
@5C\QError@     Activation not possible: Transfer structure contains invalid field LANGU
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@     Activation not possible: Transfer structure contains invalid field NODENAME
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@     Activation not possible: Transfer structure contains invalid field LANGU
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
@5C\QError@     Transfer structure 0MATERIAL_HIER_AB1 NOT activated successfully Activate manually
Please Advise on how to fix it .

Transfer structure

Hi All
i have to create a transfer structure.
in dso and cube i have 27 fields.
but in tranfer structure it is showing 50 fields.
i have to select the 27 fields out of 50 or i have to activate 50 fields in transfer structure.
Thanks & Regards
krishna

Hi,
Basically when creating the transfer structure you need to map the transfer structure fields with the ODS/Cube fields that are present in the communication structure.
You just need to Transfer the fields, that you have identified in Data source to the transfer structure and map the relevant fields in the Transfer structure.
Once the mapping is done. Just activate the Transfer structure.
Most importatnt would be to decide on the mapping between data source and Communication structure fields.
Hope it helps!!!
Regards,

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Transfer Structure 'USES' Box

Hello Friends
I have a quick question for you.What is the 'USES' checkbox for in the Transfer Structure on the far left side, right next to the CONVE box.What does teh 'Uses' box signify and what does a green check present or absent there mean.
Thanks.

Hi Krish,
The column 'USES' identify whether the field is used in the communication structure or not.
To give you an example, lets say you have two fields KTOPL and HKONT in your extract structure of the data source and you have transferred these fields to the transfer structure, however you have mapped only KTOPL to an info-object where as HKONT is not mapped (in assign info-object section of transfer rules tab). That means KTOPL will only appear in the communication structure. If you check the USES column, you can see that it will be checked (a tick mark) for KTOPL where as "blank" for HKONT.
Hope it clarifes.
Thanks
Soumya

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer Structure Creation

Hi,
I am trying to develop a tool to automate the transfer structure/info source creation. Does anyone know the table or function modules that create these?
Thanks in advance.
Alex.

Hi:
In transaction BAPI,
check the BAPI BAPI_ISOURCE_MD_T_CREATE in the Data Warehousing BAPIs (Under InfoSourceMasterXfer).
Thanks for any points you choose to assign.
Best Regards -
Ron Silberstein
SAP

Transfer structure have two different tech names?

Hi BW experts,
we got issue in transfer structure which have two different technical names:
ZCUSTOMER_DC and
ZCUSTOMER_PS
where zcustomer is the info source name.
The impact: PSA data can't be accessed ...
Any help and feedback is highly appreciated!
Regards,
Lilly

Hi Dinesh,
Thanks for your feedback.
Unfortunately, this issue is thru our system landscape incl. production. If I try to delete the DS assignment I will lose data in the PSA, right?
However, I did try to delete the DS assignment and delete the info source (the one which is available on dev only), failed, the message I get is info object xyz still being used in communication structure (I believe it must the TS with old prefix), deletion not possible.
The problem is I am not able to delete the TS with old prefix , because it is not visible in system (AWB).
Any further feedback appreciated

Transfer structure copied into another structure ?

Hello ,
Iam trying to transport an transfer structure and iam getting an error and when i looked into the SE09 log i noticed somethng strange .
I am not understanding why a transfer structure is copied into another structure as shown below in Bold while transporting ??? is this somethng normal or somehtng happening strangely in my system ?
" Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
Transfer structure 80MATERIALM_CB activated under the name 80MATERIALM_CA
It is not necessary to copy dependent objects for transfer structure 80MATERIALM_CA
Object 80MATERIALM object version not found in table
Activating Transfer Rules 80MATERIALM_CA ...
3 Transfer Rule(s) of the transfer structure 80MATERIALM_CA removed from control table
3 InfoObject(s) of the transfer structure 80MATERIALM_CA removed from control table
Formulas have been saved
Saving Structure /BIC/CACA80MATERIALM ...
Activating Structure /BIC/CACA80MATERIALM ...
Saving Structure /BIC/CCCA80MATERIALM ...
Activating Structure /BIC/CCCA80MATERIALM ...
Saving Structure /BIC/B0000015000 ...
Activating Structure /BIC/B0000015000 ...
 Object 80MATERIALM object version not found in table
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Delete Mode)
Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISFS L
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import methods of change/transport request CD3K900107 completed
 Start of subsequent processing ... 20060821140054
 End of subsequent processing... 20060821140146"
Your inputs are highly appreciated !!

Gimmo,
Do u mean i need to install and transport 0material to test system ??? coz currently i didnt install 0material in dev also thnking i dont need coz its an export datasource .
Regards
Deenu

Transfer Structure Could not be Collected

I am trying to activate some Business Content (CO-OM-CCA Costs & Allocations).
In the Select Object Popup, after selecting the required object and I am pressing the Transfer Selection. Now I am getting the errors as below
1) Object 0VALUATION_TEXT D6B100PCC (Transfer Structure,ISTS) could not be collected for object 0VALUATION_TEXT D6B100PCC (Transfer Rules,ISMP)
2) Object '0VALUATION_TEXT D6B100PCC' (ISTS) of type 'Transfer Structure' is not available in version 'D'
Message no. RSO252
This error is coming even I try to activate some DEMO Content (CO-PA Demo Cube).
I am Grouping the objects with the Option In Dataflow Before and Afterwards with Collection Mode as Collect Automatically
I am following the SAP Best Practices - BW Scenario
https://media.sdn.sap.com/html/submitted_docs/Best_Practices/BW/html/index.htm
Your help will be appreciated

Hi Nathan,
Make sure the objects are active. If so, then goto the infosource -> Extras (from menu) -> Object directory.. -> Transfer rules -> assign the package and it would ask for transfer structure later so assign the package to that as well.
Bye
Dinesh

Transfer structure 0BUS_AREA_TEXT_HA does not exist

We are transporting InfoCube - 0FIGL_C10. which we had collected in a transport request with grouping as in Data Flow Before. This request ended with return code 12 with error message "Transfer structure 0BUS_AREA_TEXT_HA does not exist, Error RSAR 440 when handling objects with type R3TR ISTS"
After this I collected the transfer rules of 0BUS_AREA_Text with grouping as dataflow before and after. the transport of this request also failed with return code 12 with the same error message "Transfer structure 0BUS_AREA_TEXT_HA does not exist, Error RSAR 440 when handling objects with type R3TR ISTS"
has any one faced this error, please suggest the corrective action to be taken,

hi all,
I'm now getting the same error when I try to activate a created "transfer rules" for any type of DataSource of my cProject.
"Transfer structure 0DPR_***********_DA does not exist
Message no. RSAR440"
please show me on step by step because I'm a new guy of this SAP.
Thanks,
Chuong Hoang
R&D engineer of global cybersoft - vn

Transfer structure prefix error

Hi all,
 When i active the transfer structure of any infosource of Ecc5.0.,I got an error message 'Transfer structure prefix for source system T90CLNT090 is not defined'. The source system T90CLNT090 is the current client of bw system.Any one who met the problem before,or have some idea about this,appreciate for sharing your experience.
best regard,
Eric

Hi Natovian,
Thanks again for ur time replying me!
I tried to follow what ever u said.. but still unsuccessful.
The Following is the screen that appears after I used SE37--> RSAP_BIW_DISCONNECT:
http://farm1.static.flickr.com/212/495977912_6f890cad34_o.jpg
I tried to see the entries for SLOGSYS & RLOGSYS using the TCODE SE16, following is the RSBASIDOC table screen which appears as:
http://farm1.static.flickr.com/208/495995911_2213885c8e_o.jpg
From the above table(screen) which combination do I have to use as entries to the following Screen(Using SE37 RSAP_BIW_CONNECT) :
http://farm1.static.flickr.com/226/495977908_9c0ee51f29_o.jpg
D I have to enter an entry for the RFC target system:??
Note: I am Using SAP ECC 5.0 IDES version; have 3 source systems defined
 1. Source system T90CLNT090 with clinet 800 ( through which I run rsa1 to move on to BW 3.5 Administrator Work Bench screen) .Its a Combined Client I guess!! But basically I enter into R/3 System first before I jusm onto BW screens
 2 nd and 3rd are the Flat File Source Systems(SS_DEMOFF & SS_ODSFLAT) which I created by my own. and My use ID is SAPUSER for 800 Client to enter SAP.
Do I have to have a BW source System as well do make this work??
I have selecetd and tried the folloowing entries from the RSBASIDOC table :
http://farm1.static.flickr.com/191/495977906_e10a056721_o.jpg
and in the result, it says that the logical system already exists.
I even tried using the flat table combination but the follwing is the result screen:
http://farm1.static.flickr.com/226/495977956_073272c7ab_o.jpg
I tried my level best to actually let you know, whats really happenening with my issue.
Hope u will have a clear picture of my problem.
Awaiting for ur precioius reply!!
Vamsi.
I tried defining a BW source system but got stuck in the middle filling up those details.
Thanks

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran RS_TRANSTRU_ACTIVATE_ALL program but still in the job log finding some problems like 0BP_RELTYPES_TEXT is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Transfer Structure - Transport Problem

Hi Experts,
I am transporting infosource from BW DEV to BW QA ( Datasource is transported and it is replicated) but when the request is imported in QA it gives me error saying " Transfer structure does not exist " . This Infosource is used for Remote Cube .
Could anyone help me in this as in QA I see Infosource in Deactivated state even though remote cube( based on this Infosource) is active .
Regards,
Vijay.

hi Vijay,
seems transfer structure not collected, maybe source system not choose/assigned. try in bw dev, with infosource selected for transport, choose grouping 'in dataflow before' and collection mode 'manual', click 'source system assignment' and make sure your source system is marked. then execute to collect objects. after finished, expand the infosource, and make sure there is transfer structure and marked. then create transport request, stms and transport again. hope this helps.

Transfer Structure 2LIS_03_BX_QB does not exist

Hi all,
I got the following error message when transporting infosource 2LIS_03_BX.
"Transfer Structure 2LIS_03_BX_QB does not exist"
Maybe somebody can help me.
Thanks and appreciate that,
-Martin-

hi Martin,
try in dev rsa1->transport connection with infosource 2lis_03_bx as starting point, collection mode 'manual', grouping 'in dataflow before', and click 'source system assignment' (yellow box with x) and make sure r/3 source system is marked. then click execute. it will collect objects, after finish, make sure transfer rules, transf structure and datasource are marked following the infosource. create request and transport.

Transfer Structure Status - Clock Symbol

Similar Messages

Maybe you are looking for