Transfer Time Machine backups to a new drive

Is there an automated or an easy way to transfer my current Time Machine back ups to the new Time Capsule (I am sure I will inevitably buy it]. Looks like a great system for notebook users but I wouldn't like to start again with time Machine I like having the security of back ups I have already accrued. My current drive is certainly not full and won't be for a while.

So far not very many people have had much success in copying their Time Machine backups to a new drive although the Restore option in Disk Utility ought to be able to do this. However, SuperDuper will support that capability when their new Leopard compatible version is released which should be in a week or so.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.shirt-pocket.com/blog/

Similar Messages

Transfer Time Machine Backup To A New Drive

Can I transfer my TM backup from one external drive to another external drive, both drives wired, or do I need to start over with the new drive? I own SuperDuper.

just clone the old TM drive to the new one using Superduper.

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Transfer Time Machine backup from one external drive to another

Surely this has been covered, but I can't find it.
If you have your time machine backup on an external drive and get a new (larger) external drive, what is the best way to transfer the backup from one drive to the other (and define the new drive as the backup drive)? Straight copy ? Then to define the new drive, rename old drive to something else and name new drive the backup name?

I haven't tried this yet but a few other methods are described at http://www.macosxhints.com/article.php?story=20071128055047339

HT5096 I need to transfer a time machine backup to a new drive. It keeps failing.

I have a 2TB Time Capsule that I was using for Time Machine for both a MacBook and an iMac. The iMac sparse bundle became corrupted earlier this spring and I was unable to delete it, so I need to reformat the TC. First, however, I need to move the TM sparse bundle for the MacBook to a new drive that I have set up just for TM for the MacBook. After reformatting, I plan to only use the TC for the iMac. I tried moving the sparse bundle tonight to the new drive, following directions listed in several places on this site and on Pondini's site. However, it failed. I am going to guess that it failed b/c I was not hooked up to the TC via ethernet. (I was on WIFI). The new backup drive is a 2TB external that was plugged directly to the MacBook. So, now I have connected them via ethernet. I am again reparing the TC volume using Disk Utility, just to make sure all permissions, etc, are ok before moving. Will I be able to move this file to the new drive easily, or should I plug the new drive directly to the Time Capsule and move it that way (while MacBook is connected via Ethernet).
Alternativey, is there a way to just archive that sparse bundle for the MacBook before I erase the drive?
FYI I am still running Snow Leopard on these machines, but trying to clean up the time machine backups today before installing Lion and moving to iCloud, so time is of the utmost importance here.
Thanks so much!
Kat

OK, this has now failed twice. I repaired the drive using DU and there were no problems (even though it took 2 hours to go thru everything to verify). Right now, the MacBook is connected via Ethernet to the TC. The new TM drive (WD 3TB external, USB 3.0/2.0) is attached to the MacBook via USB. I really need to keep this TM backup for the MacBook and also need to erase the TC. How can I accmplish both? I thought that there was a way to archive a TM sparse bundle?

Cannot transfer Time Machine backups from one external drive to another

Since I bought my 13 inch MacBook Pro in September 2014 I've been keeping Time Machine backups on an external 1TB Lacie Rugged. This is partitioned into three and one of the partitions contains my iPhoto library.
Last weekend I left my MBP disconnected from the power source but with the external hard drive still plugged in. Long story short - the battery level fell below the minimum needed to operate so it turned itself off and 'disconnected' the external hard drive. This resulted in a corrupted iPhoto library which is no longer accessible.
In order to restore my iPhoto Library from another backup I needed to buy a second external hard drive. Yesterday I bought a 2TB Lacie Rugged which I've now partitioned into 5.
I want to move my Time Machine backups from the 1TB Lacie Rugged to a partition on the 2TB Lacie Rugged (to take advantage of the new Lacie's Thunderbolt connection).
I read the Apple article -
HT202380: Time Machine: How to transfer backups from the current backup drive to a new backup drive
and followed the instructions precisely. About 2 hours into the transfer I came back to my MacBook Pro and saw a message saying that it was not possible to complete the transfer because I did not have the correct permissions. The only option was to click the OK button which stopped the transfer.
Can anyone advise what I should do next?
Cheers
Tricia

Hi Eric,
Thank you for your response. I came across another thread yesterday which suggested the Restore via Disk Utility method. It worked for me, too. This was after I had tried following the method suggested in the Apple article above three times but each time the message was the same ....
The operation can't be completed because you don't have permission to access some of the items.
I dare say that Apple would like to have us believe that it's a simple matter of 'drag and drop' but it certainly wasn't for me. From what I've read the permission problem crops up fairly frequently. Before the second and third attempts I had already amended Permissions on the Time Machine backups so that everyone could read and write, so that mustn't have been the problem. I'm the only person who uses my computer so that's not a problem.
The next problem I have is that I decided I would use the Restore route to transfer my SuperDuper clone rather than start from scratch. Unfortunately, the partition size on my original backup disk where SuperDuper clone is is 350GB and the size of the SuperDuper clone partition on my new backup is 300GB.
Of course, Apple says you can resize partitions using Disk Utility. What they don't say is you can downsize partitions but (in my experience and that of many other frustrated users on various forums) you CANNOT upsize using Disk Utility. I have 100GB spare on my external hard drive (from downsizing two partitions by 50GB each) BUT there is no way Disk Utility will let me increase the size of SuperDuper partition to 350GB :-(((
Cheers
Tricia

Easiest way to transfer time machine backup to a larger drive?

My drive was too small and now it is full, I bought a new larger drive. How can I copy the old one to the new one and have time machine just continue on? Thanks for any help guys I'm confused.

Mac OS X v10.6: How to transfer your backups from your current hard drive to a new hard drive
If you upgrade to a new hard drive with a larger capacity, you may want to transfer your existing Time Machine backups to it before using it for regular backups. To keep your existing backups on your new, larger backup hard drive, follow these steps:
Connect your new hard drive.
In Disk Utility, make sure it has a GUID partition and is formatted as Mac OS Extended (Journaled). If needed, reformat the drive as Mac OS Extended with a GUID partition. If you do not know how, see the steps in this article. Note: Back up any data on the hard drive before you format it.
Select the new drive's icon on the desktop and choose Get Info from the File menu.
Make sure "Ignore ownership on this volume" is not enabled.
Open Time Machine preferences in System Preferences.
Slide the Time Machine switch to Off.
In Finder, double-click the current backup hard drive to open its Finder window.
Drag the folder "Backups.backupd" to the new hard drive.
Enter an administrator user name and password, then click OK to start the copying process. This may take some time to complete because all your backups will be copied.
In Time Machine System Preferences click "Select Disk…"
Select your new hard drive, then click "Use for Backup."
Now, on your new hard drive, you will have all of your existing backups from the previous backup hard drive plus have more room for more new backups.
Mac 101: Time Machine

Why isn't my time machine backup updating a new drive correctly?

I bought a new larger hard drive and I am trying to use time machine (lion) to restore the new one and copy all my files. I made a Lion startup disk and use the disk utility to erase the new drive and then choose restore from time machine backup. The process runs great and then after about 3 hours it finishes and restarts the computer. Then the white screen with the grey apple and little spinner below it pop up and the spinner just spins forever.
Does anybody know what I am doing wrong? Thanks

It looks like it tries to start loading safe mode and the loading bar appears under the spinning lines under the apple but then the bar gets almost half full and just dissapears. I'm left with just that grey apple screen and the spinning lines again.
The only other startup option that seemed to get me somewhere other than the grey screen is when I hold the "option" key and choose from the hard drive or the dvd drive to boot. I can run from the dvd OS X disk that I made. Is there anything I can do there?

Can I transfer Time Machine Backup from WD Hard Drive to Time Capsule?

I have a Western Digital 500 Gb. Hard drive and recently purchased a 500 Gb.Time Capsule which, at the moment, am using only for the AirPort feature. I would like to use Time Capsule for my Time Machine backups and use the Western Digital drive as my Aperture Vault. Is there a way to move the Time Machine file from the WD drive to the Time Capsule drive so that I don't lose the old files? My Time Capsule is connected to my iMac via an Ethernet cable.

Unfortunately, no. Time Machine will backup to a local drive (e.g. via USB or FW HDD) using a folder structure. When backing up to a NAS (e.g. Time Capsule or USB HDD connected to a TC or Extreme), TM utilizes a sparsebundle. You cannot easily convert a folder structure to a sparsebundle. The best plan is to start a NEW backup to TC. Connecting via ethernet is highly recommended for the initial backup.
P.S. You can still access the old TM backups until such time that you want to reclaim the use of the HDD.

Moving 1 of 3 Time Machine backups to a new drive?

I have an unpartitioned external hard drive that is the destination for time machine backups for 3 separte computers. I would like to issolate one of these and move it to its own separate hard drive but the only instructions I've been able to uncover for moving backups involves cloning the disk. Is there a way to move only one of these?

Clone the disk and then delete the backups you don't want. Any other method is going to take many times longer and may fail.

I am attempting to restore a time machine backup to a new drive.

I seem to have restored all the files, but the settings arent restore (ie desktop, software settings, where pictures are etc.) how do I restore the settings

See Pondini's TM FAQs, for details.

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
Also, if you want to have dual backups, see -->>
http://pondini.org/TM/27.html.
I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
It should work well for you.
Clinton

How to transfer time machine back up to new hard drive

How to transfer time machine back up to new hard drive?

You may like to take a look at this thread... https://discussions.apple.com/thread/4207670?start=0&tstart=0

How Can I Migrate My Time Machine Backups To A New External Hard Drive?

I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

ivan wrote:
How Can I Migrate My Time Machine Backups To A New External Hard Drive?
I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
Hi iVain
Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
Hope this answers your question. See:
http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

Moving Time Machine backups to a new larger drive?

Just wondering whether using Disk Utility to 'restore' the drive (ie. making a duplicate to a new larger drive) would be 100% functional and compatible with Time Machine?
ie. I want to switch my time machine backups to a larger drive, but I want to take all my existing backup history to the new drive, rather than just doing a fresh backup to the new drive.

bilbo_baggins wrote:
Just wondering whether using Disk Utility to 'restore' the drive (ie. making a duplicate to a new larger drive) would be 100% functional and compatible with Time Machine?
yes, it will work. just turn off TM while you are doing this.
ie. I want to switch my time machine backups to a larger drive, but I want to take all my existing backup history to the new drive, rather than just doing a fresh backup to the new drive.

Transfer Time Machine backups to a new drive

Similar Messages

Maybe you are looking for