Transfer to MacBook via Target Disc Mode Get red Circle

I'm doing a transfer of HD from iBook to my MacBook and I'm seeing that all my folders within my username box all have the red circle with the white minus symbol in the middle. These red circles appear on my iBook's desktop, documents, library, movies etc, What does that mean? I hope it's not deleted them, I did a migration using the assistant and my photo's and music did not transfer.

This is what you see when you are not logged into the account - it means you don't have permission to access them. It sounds as if you created a user account on your Macbook before running Migration Assistant. If this had the same name as your older user account then on migration the name has probably been changed to the same thing with a -1 on the end. Log out of what you are currently in and try logging in to this account.

Similar Messages

Time machine backup via target disc mode?

My MBP is stuck at the grey screen on start up and the only way to access it is via target mode.
Is there a way to do a time machine back up through target mode or maybe a migration assist back up onto my external, through target mode.
So that once I have formatted my drive and reinstalled lion I can just restore from time machine or migration assit?
Any help or other solutions are greatly appreciated.

I would not attempt a Time Machine backup that way. Carbon Copy Cloner to an second external hard drive would be better. That way you can extract the exact elements that got corrupted.
If the target machine is not visible, you may need to follow these directions:
https://discussions.apple.com/docs/DOC-1689

Transferring Mail using Target Disc Mode

Please I am begging for someone to help me ! I have an older Macbook Pro , that is running , or was running Mavericks 10.9.2. Awhile ago it quit booting and a reinstal using recovery was unsuccessful. Using disk utility i was able to determine the drive is fine and it is in fact an OS X issue. It was time to buy a new computer anyways , so I did. Now connecting the two via fireware using Target Disc Mode I am able to find and transfer all that I have wanted , except for my previous mail folders.
when i look through the folders on the drive of the computer that wont boot , there are two library folders listed. One is all on its own , and one is a sub folder inside the system folder. The only mail folder i can find in either of those folders only carrys previous stationary information. I care not about the stationary! There is no library folder listed inside of my user folder , which makes me wonder , can i access my user library on a dead macbook using target disc mode. Or can i not get access to it this way.
any help is appreciated!

I found the answer In case anyone else is looking .....
https://discussions.apple.com/thread/3686247

Installing OS on wiped PowerMac G4 Using Target Disc Mode?

Hi,
My parents recently bought a new iMac, and I decided to wipe their old PowerMac G4 and reinstall an OS (either 9 or 10.2) with the hope of improving functionality. I wiped the PowerMac by booting it in target disc mode and using the disc utility on a Macbook Pro (intel, running 10.4) to erase the PowerMac HD.
The next step got a little tricky for me, however, because the disc drive on the PowerMac is broken. I tried booting the PowerMac in target disc mode, and running the 10.2 installer on the Macbook Pro (with the intent of choosing the PowerMac as the destination), but as I feared, this failed because the Macbook Pro is Intel-based and can't run 10.2.
Then I tried booting the Macbook in target disc mode with an install disc in it and booting the PowerMac while holding down the -option- key. The PowerMac display shows the firewire drive and I select it. Unfortunately, when using the 10.2 disc I end up with the "prohibitory sign," and when using the OS 9 disc, I dead-end at "The system software on the startup disk only functions on the original media, not if copied to another drive."
I would think that this last message would occur when using a copy of the OS disc, but I am using the original, model-specific, OS 9 disc that came with the PowerMac. The OS 10.2 disc I tried was the disc used to upgrade the PowerMac to OS X a few years after the computer was purchased.
Any help you have to give is much appreciated.

You look to have two possibilities: get an external Firewire optical (not completely cheap, it would seem) or just replace the internal drive with one like this one from OWC. Right now, they are selling a unit from LG, as opposed to the Samsung unit I bought from them a couple of months ago and dropped into my venerable B&W G3.
There are probably comparable drives out there from other sources, but that would probably be the best solution if you plan to continue using the G4 for any appreciable amount of time.

Can I connect a macbook pro and an ibook g4 via ethernet with ibook in target disc mode?

Well, that's the question, really. I just bought a refurb macbook pro as an upgrade for my sister's elderly ibook - which has been a great computer, but which can't run any system newer than Tiger, and which has an extremely crowded hard drive. We began setting up the new computer last night, and got to where we were instructed to use migration assitant to transfer files from the old machine. This is where things fell apart.
1. Although both machines were on my sister's wireless network, the macbook pro did not see the ibook.
2. When we tried to connect the machines via firewire, we had a new problem - our particular macbook pro does not have a firewire 400 port. Same problem when we thought of connecting my sister's extermal verbatim drive. The macbook pro recognized the drive when we connected via USB, but, after asking if we wanted to use Verbatim for Time Machine, it didn't seem to see it when we answered "Not now".
I have ordered an adapter for our firewire cable, but, in the meantime, I have an ethernet cable at home which I used to transfer data from my older iMac G3 to an eMac. Can I use this cable while putting my sister's ibook into target disc mode, or must I wait for the connector? It is VERY frustrating having such a hard time moving information from one Mac to another. I've been a Mac fan (and evangelist) for years because Macs are generally easy and reliable. But now we're stuck.
I've been reading the boards and understand that target disc mode is the way to go, since we can't use migration assitant to move files between an Intel machine and a PPC. The new macbook pro is running Lion, while the old iBook is running Tiger 10.4.11. Neither of us has any experience with Lion, though we've both used Macs for many years.
TIA!

Thanks, Niel! As it turned out, I had a LaCie rugged drive at my place which had both Firewire 400 and Firewire 800 connections and cables. So I hooked it up to the old iBook, pulled my sister's stuff onto it as instructed in the ppc to intel thread, and then hooked it up to the Macbook Pro. Problem solved! - almost. We did have two issues:
1. My sister has a lot of music - more than 12 gigs were on the iBook's hard drive, but only about 6 made it onto the Macbook Pro. Why is that? I also got a message, when I was trying to move the music folder from the old library onto the new one, that OS X needed this folder and it couldn't be modified. Again, why is that? How, then, do you move files from a PPC to a machine running Lion? Again, a lot of her music files did make it over, but not all of them.
2. All her photos did seem to come over - in duplicate, maybe even in triplicate. That is so annoying! The same thing happened to me when I was migrating between my old eMac G4 and my iMac G5. Why on earth does iPhoto do this, and how can we make it stop?!
But we did manage to get a lot of her stuff onto the new machine. When we get the adapter, she'll be able to add the files that are on the Verbatim drive. You've been very helpful!

Macbook in target disk mode locks up when trying to transfer files to another computer. Suggestions?

A week ago I installed snow leopard on my girlfriend's macbook without backing anything up. Dumb idea I know. The installation failed multiple times. I ran her computer in target disc mode to try to save what files I could. Now when I try to transfer files it will freeze up at different times. Sometimes I can transfer a huge amount of data like 4GB's and the other times it locks up trying to transfer 4kB's. I'm at my wits end trying to figure this out. I can see the files but can not transfer them.
Any suggestions or past similar past experiences?

Hi Anand,
Have you noticed when you plug the drive in whether its making any sounds? You can put your ear up to the drive on the Macbook. Its located on the right hand front sided of the top case.
Also, check to see if the target disk mode icon is moving after a few minutes. If the firewire icon has stopped moving it usually indicates that theres something seriously wrong (probably mechanical) with the drive.
Id definitely give Disk Warrior a try. Especially if you have a situation where you can hear the drive running or spin up but it doesn't make any sound after that. Hope this helps.

Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
Here comes the point/questions:
If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
Thanks,
-Alec Page

Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

Macintosh transfer over the presets and preferences WITHOUT transferring the ENTIRE HD with "target disc mode

I'm picking up the new 2014 MBP tomorrow so should be installing over the weekend / next week.
I've been currently using a 2011 MBP with OS 10.7.5, using the "home" folder, which I will NOT be doing on the new one MBP with Mavericks.
What is the best way to transfer over the presets and preferences I want, WITHOUT transferring the ENTIRE HD with "target disc mode" or something similar? I am FRESH installing all APPLICATIONS.
Mainly it's the presets and preferences I want to transfer.
Thanks in advance.

I'm picking up the new 2014 MBP tomorrow so should be installing over the weekend / next week.
I've been currently using a 2011 MBP with OS 10.7.5, using the "home" folder, which I will NOT be doing on the new one MBP with Mavericks.
What is the best way to transfer over the presets and preferences I want, WITHOUT transferring the ENTIRE HD with "target disc mode" or something similar? I am FRESH installing all APPLICATIONS.
Mainly it's the presets and preferences I want to transfer.
Thanks in advance.

Target Disc Mode via Firewire PC Card

I am unable to boot my PowerBook Ti in firewire disc mode as my firewire port died. Since i've been using a PC card with 3 firewire ports on it. When attempting to reboot in firewire disc mode with another mac it just restarts.
I surmise the issue lies in the boot order? Does the PC card load later than when an internal firewire port would become available?
Thanks!

Hello Nathan,
I believe the reason you can not use firewire disc mode is because you need to use the built-in firewire ports for target disc mode to work. The device information for the built-in firewire ports are loaded with Open Firmware as the computer starts up. I'm guessing that the PCMCIA card slot device information isn't loaded until after Open Firmware has loaded, thus making it unavailable for firewire target disc mode.
Hope this helps!
Hi O,
In my experience, the superdrives are reliable and i wouldn't worry about it breaking. That being said, all drives will die eventually, but the superdrives seem to be well built and usually last a long time. Replacing an optical drive on a 12" AL powerbook is actually quite a pain. You basically have to remove everything, including the logic board, to replace it. I wouldn't recommend replacing it yourself unless you have the proper experience and tools required.
Hope this helps!
Brian Cometa (ACHDS)
www.briancometa.com

Target Disc Mode + Disc Mounting issues

I hope this is a suitable forum for this topic.
Anyway, I recently posted a question concerning the connection of 2 Mac's (one disabled), in order to save the contents of the disabled MBP.
I have since obtained a 6 pin to 9 pin cable (to connect my MB's FireWire 400 to MBP's Firewire 800), and have tried to access the MBPs hdd via Firewire/Target Disc Mode.
I have no problems booting the MBP to Target D. Mode, but the disc will not mount on my Macbook.
The main problem that I have noticed is the S.M.A.R.T status on the MBP's internal drive is saying "not supported". From what I have read this is a common status message for 3rd-party installed harddrives, but my internal is the factory installed drive.
Im pretty sure I know the answer: The drive is dead, ie. get a new one. But I just thought I would ask the you guys if there is some way to "fix" the SMART status so that it will mount.
Also, (and this is what makes me 99.9% sure the drive is dead) when linking the 2 computers in Target Disc Mode, the Leopard Install disc that was in the optical drive of the MBP was read on my Macbook, so I know the Firewire cable/both ports are in working order.
Hope this makes sense, as I tend to ramble!
Thanks for any help or suggestions,
Matt

If the drive does not mount and is otherwise inaccessible then booting into Target Disk Mode isn't going to help you. A drive's SMART status is not reported over FireWire or USB. The SMART status is only reported for the internal drive, locally. SMART has nothing to do with whether the drive is working or not. It is merely an information report.
All that you can hope to accomplish might be to purchase recovery software, boot the computer from the recovery software DVD, and hope something is recoverable. Or you can send the drive to one of the many disk recovery businesses to see if anything can be recovered from the dead drive.
File Recovery Software
Data Rescue
File Salvage
TechTool Pro.
The first two have demos you can download. The demo will indicate what if anything is recoverable, but until you pay for the software and get a serial number you cannot recover anything. You would also need the bootable DVD. This will not work if the drive's motor is dead or if the drive's interface board is no longer functioning. Both of these render the drive inaccessible. In this case recovery would have to be through a data recovery service like Drive Savers.
Each of the preceding comes on bootable CD.
Message was edited by: Kappy

Using target disc mode to access a broken laptop

I'm using a 1.33 15" PB with 10.3.9
and broken early 12" still on 10.2.8
During an attempted repair of the 12" DC in jack, also replacing the broken CD/DVD Drive with a SD using a replacement lower case and screen that still had the screen control? and dc in jack in it, broke the connection for the screen control on the 12" logic board, Thought I had it effectively soldered back on, but appears not. Screen won't light up, But appears to powering up, get the dong and hard drive spins up.
Was told to connect the two units together with firewire and use the Target disc mode to access the data on the broken machine. (which normally needs to be logged into on start up normally, but can't, not being able see the screen)
With the 12" powered up, I restarted the 15" holding the "T" key down and get a screen that has a Yellow "Y" like icon that moves around the screen, "O" with 3 extensions off it, 1 solid and other 2 dashes.
After a minute or so, shut it down, now sure if it was eventually going to work or should have waited longer. or done something else?, Was expecting the normal desktop to show up with some kind of icon for the other computer, then maybe figure out from there how to transfer the data to the new unit.
Have no idea what to do next or what the problem might be, if I'm doing something wrong, or have to change settings somewhere on the 15" before doing it?
This a used unit, with a fresh 10.3 install and upgraded to 10.3.9 Haven't even gone into the system preferences yet and don't know what most of it's for anyway, (Just did the initial set up) or if the 12" has hardware problems still, etc,
Have a USB external HD adapter and can take the HD out of the 12" instead and see If that'll work? But still not sure if I'm going to encounter something else again that's not easy to figure out in order to get the data off it. Transfer it to the 15" or be able to use it on the external drive
Thanks in advance, And hopefully simple instructions....

Thanks, That eventually worked, Oddly produced an open OS 9 Virtual PC 3 Application folder on the 15" desktop that I installed on the 12" long ago and never used before the external drive icon as I named it for the 12" showed up
Clicking on the external hard drive icon had it open the 15" system folder? Hard drive content window (the os 10.3.9 having a different format than what I'm used to seeing)
All the familiar folders from the 12" were there, but the couple times I tried to open one of them, the external hard drive icon and related entire open desktop window, (Hard drive content) disappeared and produced an error message to properly eject the item, But there nothing there to eject anymore, subsequent attempts to get it back failing, But eventually got it up again.
But can't open the 12" mail application to retrieve my old emails and can't seem to find the file to rebuild the 15" mailbox into what I had in my 12" or save/find those emails, but not sure where to look, must be files somewhere for them.
Every time I click on the mail app in the 12" file, it pops down into application bar and disappears. Tried dragging it into the 15"s icon and that not doing anything either. Also dragging it into the app tool bar and trying to open it and it doing nothing, Presume unable to in the later os.
Will this still happen if I take the HD out? and connect with my USB adapter? Need to boot from this? (have no idea how to do that)
Any suggestions on where to find my old mailbox files? Tried opening a number of odd files in the system folder and found nothing in some of them.
I'm presuming this isn't working because it's still an OS X 10.2.8 application But all the other files appear to still be there and think I found the mail before at one time.
Also got an error in iphoto, Can't open it because it needs to be opened in the later version. But found the 12" iphoto file and dragged it to the desktop and took a bit to transfer, so presume I should move it or specific files in it into the 15" iphoto 15" file to retreive the photo's. (and also moved my camera app to reinstall) Same with my itunes which only had a few cd's in it.
The 12" desktop also took a bit to find, but moved that file to the 15" desk top and those files took a little while to transfer. Some of those are MS Word files so also moved the MS Word app and expect to need to reinstall it before trying to open any of those word doc's.
Still wonder why it produced that os 9 as an open folder which was a virtual pc 3 program I never got around to using,

Help, can't startup PB except by target disc mode

On normal start up, I get the "You need to restart your computer......" message with start symbol behind the writing. every time I try to restart the same thing happens. I've tried all the keys on start up tricks and the only ones that work are option/startup where I can choose Hard Drive, OS Disc, or Hardware tools. If I choose Hard Drive, it goes back to the kernal panic screen with "you need to .....". If I choose OS Disc, it goes to a light gray screen with the apple symbol in the middle and just stays there (also does this if I try to startup holding C with startup disc). If I choose Hardware Tools, it lets me test the hard drive and everything checks out fine but when I restart back to the "You need to restart.....". It will also startup in target disc mode hooked up to my iMac. All of my apps and files were there so I transfered everything, whew! I can then insert the startup disc into the PB and it comes up on my iMac in target disc mode. I then try to open and reinstall OS 10.4 but it tells me I have to restart to start the process and I can't do this in target disc mode. I just ant to be able to erase everything on my PB and reinstall OS 10.4 with the PB start discs. Is this possible? thanks....
J.R.

Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
Have you recently added RAM?
May be a solution on one of these links.
Mac OS X Kernel Panic FAQ
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics
Avoiding and eliminating Kernel panics
12-Step Program to Isolate Freezes and/or Kernel Panics
You should be able to erase your PB (in target disc mode) hard drive while it is connected to the iMac. Use Disc Utility on the iMac. You can even install Tiger on the PB while it is connected to the iMac via TDM.
 Cheers, Tom

Is it possible to install OSX on another computer via Target disk mode?

Hey there...
a friend of mine has an older iBook. the drive on this iBook is broken (snapped off) so there's no way of using it.
is it possible to install OS Panther from another computer (use OS X panther install running on a MacBook, or G4) targeting the iBook via Target Disk mode?
thanks!
-

Hello Again SCHPiLKAS!
As roam posted, you cannot use the Intel MacBook install discs, on the PPC iBook.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
If the iBook meets the Panther System Requirements, and the Additional Panther System Requirements, and you have a Full Retail Version, of the Panther Install CDs, you can use Firewire Target Disk Mode, to install the system.
The Panther discs should look, exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
ali b

I put my macbook into target disk mode and now it won't start up in regular mode

I put my macbook into target disk mode and now it won't start up in OSX. I have used my install disk and repaired the drive. I have held down the option key to choose the system. I have tried to start in safe mode with same result. The apple screen appears, but the gear just keeps turning. I can get it back into target disk mode by connecting it by firewaire to my macbook pro. It will start up in Windows when I choose that system. What can I do to get it to start up with OSX?
Thanks for your help.

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

Using thunderbolt to firewire adapter for target disc mode

I need to transfer several GB of data from a 2011 iMac running OS 10.6 to a new Mac Mini running OS 10.9. Can I connect the older iMac to the newer Mini with a Thunderbolt to Firewire adapter and boot the iMac into Target Disc Mode and transfer the data to the new Mac Mini? I've used TDM with two Firewire machines, but not with a newer Thunderbolt to Firewire Machine using an adapter.
Thanks for any input.
--SL

Hi Salnews,
I've done quite a bit of research on this, as this is what I plan to do (only from a MBP on 10.9, but I don't think your situation would be any different) and everything I've read says the answer is yes.
EDIT: I see you're on 10.6.7. You should update to 10.6.8 first.

Transfer to MacBook via Target Disc Mode Get red Circle

Similar Messages

Maybe you are looking for