Transfer Under SEM-BCS

Hi Experts,
I am using additional financial data for Investments and Equity Data.
I want to perform transfer of Consolidation unit from One Group to another Group.
However, when I execute Transfer activities along with Change Organizational function, the Financial Data is transferd to target group but Goodwill data is not posted to Transferee Company.
Please suggest the procedure for Total Transfer with or without affecting Net Income.
Warm Regards,
USR

Hi,
I guess you tick the "extraordinary amortisation of goodwill" in the C/I system utilisation.
If you tick this function, then you have to provide the usefull life for its amortisation.
Hope it helps.
regards,
Halim

Similar Messages

SEM-BCS: total transfer

Hello,
I need help.
Scenario: Two companies will be merging as one and falls under the same cons group.
Is total transfer (under COI) the correct activity to use?
If yes, please help share what are the different settings, changes, financial data, so I can test in the SEM-BCS.
Thank you in advance

Hi Jouan,
So are you trying to say that total transfer is not for merging one company to another company scenario?
For example company A fully acquired company B. So we intend to merge company B'sfinancial data into company A.
Can we use total transfer for this?
Thank you.
Krezel

General Questions about SEM-BCS Data Transfer

Please help me guys ! I need a clearer picture as to how exactly the loading of data should be done to SAP SEM-Busines Consolidation
Q1) Can I specify the Basic Cubes in my Data Basis Streams that I use for FI & CO in BCS-Workbench ? Or do I need to switch these cubes to Transactional, so it can be used in SEM-BCS ?
Q2) or Do I have to export the data out of my FI & CO cubes in BW to a FLAT FILE, and then load the Flat File into custom Transactional Cubes ?
Q3) Usually, for SEM-BCS would there be any direct connection to SAP R/3 or it`s via BW ?
Please help me with these initial issues guys ! Very much appreciated!

Hi Eugene,
 Great man! You`re back!...Nice to hear from yourself
 Anyways, I still am struggling to understand the Intergration from SEM-BCS with BW and/or R/3. If you have any material that can help me understand the intergration would be helpful.
 So, I had a look into the SAP Note 689229
 It says, all changes of master data nad hierarchies have to be made via the application layer by means of application SEM-BCS :-
a) By Flexible Upload
b) Manually in Consolidation Workbench
c) In Subordinate systems from transports
Hence, am I correct to assume that the only 2 options are permitted: Option (a) Flat File (b) Manually define the master data in BCS-Workbench ?
 So, now assuming that I need to define Consolidation Items into SEM-BCS.
Because there's too many, I would go with option (b) Flat File.
So, I create a Flat File containing the Consolidation Items. Next, how do I get this loaded into BCS-Console ?
Do I have to create a Transactional Info Cube and then load this Consolidation Items Flat File into it? Then following from there, I specify this Transactional Info Cube in my Data Stream ? or
Is there a way, I can directly read the Flat File from SEM-BCS ?
I use the following Info Cubes as source to my Data Basis:-
 Data Target | Virtual InfoProvider
TOTAL RECORDS = 0BCS_C50 | 0ECCS_C05
DOCUMENTS = 0BCS_DS12 | 0BCS_VC12
 P/S: We don`t use the SAP R/3 ECCS Module
Message was edited by: John Mcluskey

SEM-BCS: Merger

Hello Experts,
I have this scenario below:
Two companies will be merging as one company. Both of these companies falls under the same consolidation group.
We plan to use vertical or horizontal merger. However, its not found in the set of COI activity in SEM-BCS.
Is it available in SEM-BCS?
If so, please help provide helpful documentation.
Thank you so much in advance for the big help.
Regards,
Krezel

hi Krezelmina Adjad,
See the following links first:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cfa4ba90-0201-0010-6480-ea9498dcfceb
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/98c4d590-0201-0010-e480-eca9942ffede
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/51ae9d90-0201-0010-92b9-82ef8e5458e7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ed09790-0201-0010-c28e-c639f87d40b9
BASICS OF BCS:
Basics of BCS modelling -
Key figures -
You are generally not permitted to change any properties of the key figures used in SEM-BCS. The only exceptions to this are options that affect the display in Business Explorer and the "Characteristic is document property" setting.
If you want to use your own InfoObjects as key figures for totals records in the InfoCube, consider the following conditions:
1. SEM-BCS supports four roles for key figures in the data stream for totals records: Value in group currency, value in local currency, in transaction currency and quantity. You can assign a maximum of four key figures in the data basis accordingly. If you include additional key figures in the InfoCube, these cannot be processed in the consolidation. You are not permitted to assign other roles, such as 'subassignment,' to key figures either.
2. In SEM-BCS, the values are always stored periodically in the database. Furthermore, year-to-date values or non-cumulative values are not managed separately but result from cumulation in each case over the periods of the current fiscal year up to the current period. (This is a purely technical restriction. The consolidation functions greatly support the process with year-to-date values.) Therefore, you must define InfoObjects as cumulative values. Proceed according to the 0CS_TRN_GC, 0CS_TRN_LC, 0CS_TRN_TC, 0QUANTITY InfoObjects that are delivered.
3. You cannot use referencing key figures in SEM-BCS. If you want to define a key figure with a reference, to transfer the technical properties of the referenced InfoObject identically, you can simply create this with a template instead. However, if you want to use the special BW function linked with referencing key figures (see the online documentation in the BW), enter the referencing key figures in the InfoCube, but assign the referenced key figures to the data basis.
Characteristics
With the following characteristics, you are not permitted to make changes to the properties. Once again, the only exceptions here are the options that affect the display in Business Explorer:
0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR, 0BCS_AREA, 0BCS_AUTODL, 0BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COITOA, 0BCS_CTFLG, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWNEG, 0BCS_GWPROC, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_ORGCH, 0BCS_ORGCHL, 0BCS_PRGRP, 0BCS_REFPER, 0BCS_REFYR, 0BCS_SEQNM, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0CS_COIAC, 0CS_COINR, 0CS_PLEVEL, 0CURRENCY, 0DATE, 0UNIT, 0USERNAME
Compounding -
When you define the compounding of an InfoObject, some compound relationships are not supported:
You cannot compound subassignments to consolidation units.
You are not permitted to compound the document type and the (0CS_PLEVEL) posting level.
You cannot compound noncurrent assets and assets/liabilities to 0BCS_ALTYPE. In addition, you cannot compound to a characteristic from the totals cube, with the exception of consolidation units, partners, and so on, and their higher-level characteristics.
ODS objects / Virtual InfoProvider -
You can generate the ODS objects for additional financial data and the virtual InfoProvider from the data basis maintenance. However, you can also create these manually and enter them in the data basis. If you do this, create the ODS objects and virtual InfoProvider with the same characteristics and structure they would have had if generated by the data basis maintenance. You can only deviate very slightly from this.
You are not permitted to include the following InfoObjects in any InfoProvider, unless they are generated by the data basis automatically:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY
The following InfoObjects must not be contained in the InfoObject catalog, which is defined in the data basis:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY, 0FISCYEAR, 0FISCPER3
Time characteristics -
SAP consolidation SEM-BCS ignores changes with the 0FISCPER, 0FISCPER3, 0FISCVARNT and 0FISCYEAR time characteristics. If you make changes, for instance, if you create hierarchies or attributes, these are not taken into account by SEM-BCS. Therefore, there is no maintenance in the workbench, you cannot use the hierarchies or attributes in the functions of SEM-BCS for selections and so on, and you cannot use the attributes or hierarchies for selections in BW queries.
Characteristic values
The following InfoObjects may have the values set by default by SAP only . You are not permitted to change them, not even by using the BW master data maintenance:
0BCS_AREA, 0BCS_AUTODL, 0BCS_COISRT, 0BCS_CTFLG, 0BCS_DIDIEL, 0BCS_GWMEM, 0BCS_GWPROC, 0BCS_IPAAC, 0BCS_IPATTY, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_REPMOD, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0BCS_TIMMOD, 0CS_COIAC, 0CS_PLEVEL
For these InfoObjects you can only use the tools of the master data service of the Financial Basis to synchronize master data, so the master data is transferred by the SEM-BCS tables to the BI tables, but not the other way round.
Predefined InfoObjects for individual roles
The system automatically uses most of the InfoObjects mentioned here to activate certain data streams. However, there also are some InfoObjects that you must manually enter in the cube for the totals records. Subsequently, you must assign certain roles to these InfoObjects. These roles are allowed for these InfoObjects only, you cannot assign these roles to other InfoObjects.
These are:
0CS_PLEVEL for the posting level role (required)
0BCS_CTFLG for the conversion role (optional)
0BCS_PRGRP for the product group role (optional)
Activate characteristics and key figures from BW Content
Before you create a data basis of SAP consolidation, you have to activate certain InfoObjects from BW Content.
1. You must always activate the following: 0CS_PLEVEL, 0FISCPER, 0FISCPER3, 0FISCVARNT, 0FISCYEAR.
2. If you use documents, you must also activate: 0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR
3. If you use the virtual InfoProvider, activate: 0BCS_REFPER, 0BCS_REFYR, 0BCS_REPMOD, 0BCS_TIMMOD also
4. If you use any data stream in addition to the totals records, also activate: 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8
5. If you use the data streams of the consolidation of investments, activate: 0ACQ_PER, 0ACQ_YEAR, 00BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COISRT, 0BCS_COITOA, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWMEM, 0BCS_GWNEG, 0BCS_GWOFFS, 0BCS_GWPROC, 0BCS_GWRED, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_SEQNUM, 0CS_COIAC, 0CS_COINR
6. If you use organization changes, activate: 0BCS_ORGCH, 0BCS_ORGCHL
7. If you use data streams for stock and delivery data, activate 0BCS_PRGRP.
8. If you use data streams for assets/liabilities or noncurrent assets, activate: 0BCS_ALTYPE, 0BCS_DPER, 0BCS_DYEAR, 0BCS_IPADAU, 0BCS_IPALCM, 0BCS_IPATTY, 0BCS_RETBG
The list of the InfoObjects varies depending on the release. Of course, you do not have to activate InfoObjects that do not exist in your release.
You do not have to activate InfoObjects that are not explicitly specified. However, if you do not activate them, some functions may not be available to you. For example, if you do not activate the 0BCS_CTFLG InfoObject and do not use it for totals records in the InfoCube, the currency translation cannot display any currency translation differences on the initializing data records.
Attributes When you define the InfoObjects in BW, attributes can be assigned to InfoObjects. This results in the following restrictions:
In SEM-BCS 3.1B, 3.2 and 3.5, no InfoObjects that appear in the permanent parameters of a consolidation area or are fixed in a consolidation area may be attributes of an InfoObject used in SEM-BCS.
InfoObjects that are used as a consolidation unit must not have 0FISCVARNT as an attribute.
Note 727776 - Requirements of SEM-BCS for data model.
check these links also:
http://help.sap.com/saphelp_sem40bw/helpdata/en/67/f7e73ac6e7ec28e10000000a114084/frameset.htm
Re: Synchronize Master Data between BCS and BW within the same SEM system
/message/1508507#1508507 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-sem/dataflow-from-r3-to-sem-bcs-950671
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169 [original link is broken]
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9057475ca611d4b2e30050dadfb23f/frameset.htm

How SEM BCS handled balance carried forward?

Hi,
I would like to find out how SEM BCS handled balance carried forward?
Income statement
Profit after Tax - 50
Balance Sheet
Retained profit (last year) - 100
Current Year profit - 50
How do i configurate 'Profit after Tax' = 'Current Year profit' in workbench? Is BCS going to store the computed results?
Balance items (ie 'Retained profit (last year)' and 'Current Year profit') by default are carry forward to next year in BCS.
Do i need to configurate 'Current Year profit' add to 'Retained profit (last year)'?
Pls advise.
Thanks.
Regards, Renee

Hi Renee,
By default, the balance sheet items are to be carried forward to next year. If you dont make any settings, both items, Retained profit (last year) and Current Year profit will be transferred to themselves, that is not correct.
You need to show the system which items are to be carried forward not to themselves.
To force the system to make the proper transfer, in UCWB go to Consolidation Functions -> Balance Carryforward -> Items to be Carried Forward.
Enter there the following information:
Orig. Item__________Debit Item_______Credit Item
Current Year profit____RE (last year)_____RE (last year)
Do the similar operation for all items to be carried to other than themselves items, for example dividends of the current and last years etc.
Hope this helps.

Remote Extractor and Real Time Infocube for SEM BCS

Hi Experts,
I have somes doubts about the integration between SEM and BW.
There is a cycle that have the next processes:
1.- begin in R/3 with the movements in FI, CO and/or general ledgers
2.- Activate the extractors standards for replicate/extract data to BW. For example, 0FI_GL_XXXX.
3.- Configure a method for take the information from BW to SEM.
4.- My doubt begin here... For take the information from SEM to the real time infocube, where I configure? What Have I for configure?
The real time infocube, What is the proposal? Where take the data? Here, Do the remote extractor begin to apply?
Thank you very much for your collaboration.
Regards,
Jeysi Ascanio

We're using 0FI_GL_20 to read directly from FAGLFLEXT into SEM-BCS via a BI remote cube. There are some basic transformations in BI to "populate" the remote cube, then a standard Load from Data Stream in BCS to do final mappings. In the BCS workbench, just create a source data basis off the remote cube.
This works at my current project due to fairly low ECC data volumes. If you are doing any complex mapping on the Company or Fiscal Year / Period infoobjects, you may need to create a inverse mapping routine in the remote cube to transfer selection criteria. If you see messages in the monitor following a data load such as "xx,xxx of xxx,xxx records ignored", that means that you are reading too much data from ECC and it is only getting filtered on the BCS side. We had this problem with a custom extractor and adding an inverse mapping routine cut the load from ~5min to 30sec. (Basically, the custom, template-delivered, extractor only had 0FISCPER, not 0FISCPER3 and 0FISCYEAR, so we would read all 17 K4 periods into BI, map them into BCS, then BCS would throw out the unneeded periods. Unfortunately, we did not have the option to change the extractor, so this was the best approach.).
If I had large data volumes, I would use a regular BI basic cube for staging (or possibly a multi-cube with a mix of basic and realtime, depending on the load requirements to BCS).
If you use 0FI_GL_20, I would strongly recommend you implement OSS Note 1245822, or be on SAP_APPL 603.0002 or later.
Hope that helps,
- Chris

Implementation of SEM-BCS

Hi Experts,
i am trying to implement SEM-BCS. I am still new in it. Are there any documentation about step by step to configure SEM-BCS?
Thanks a lot for your help.

Hi,
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=bw-bcs&cat=sdn_all
Basics of BCS modelling -
Key figures -
You are generally not permitted to change any properties of the key figures used in SEM-BCS. The only exceptions to this are options that affect the display in Business Explorer and the "Characteristic is document property" setting.
If you want to use your own InfoObjects as key figures for totals records in the InfoCube, consider the following conditions:
1. SEM-BCS supports four roles for key figures in the data stream for totals records: Value in group currency, value in local currency, in transaction currency and quantity. You can assign a maximum of four key figures in the data basis accordingly. If you include additional key figures in the InfoCube, these cannot be processed in the consolidation. You are not permitted to assign other roles, such as 'subassignment,' to key figures either.
2. In SEM-BCS, the values are always stored periodically in the database. Furthermore, year-to-date values or non-cumulative values are not managed separately but result from cumulation in each case over the periods of the current fiscal year up to the current period. (This is a purely technical restriction. The consolidation functions greatly support the process with year-to-date values.) Therefore, you must define InfoObjects as cumulative values. Proceed according to the 0CS_TRN_GC, 0CS_TRN_LC, 0CS_TRN_TC, 0QUANTITY InfoObjects that are delivered.
3. You cannot use referencing key figures in SEM-BCS. If you want to define a key figure with a reference, to transfer the technical properties of the referenced InfoObject identically, you can simply create this with a template instead. However, if you want to use the special BW function linked with referencing key figures (see the online documentation in the BW), enter the referencing key figures in the InfoCube, but assign the referenced key figures to the data basis.
Characteristics
With the following characteristics, you are not permitted to make changes to the properties. Once again, the only exceptions here are the options that affect the display in Business Explorer:
0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR, 0BCS_AREA, 0BCS_AUTODL, 0BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COITOA, 0BCS_CTFLG, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWNEG, 0BCS_GWPROC, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_ORGCH, 0BCS_ORGCHL, 0BCS_PRGRP, 0BCS_REFPER, 0BCS_REFYR, 0BCS_SEQNM, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0CS_COIAC, 0CS_COINR, 0CS_PLEVEL, 0CURRENCY, 0DATE, 0UNIT, 0USERNAME
Compounding -
When you define the compounding of an InfoObject, some compound relationships are not supported:
You cannot compound subassignments to consolidation units.
You are not permitted to compound the document type and the (0CS_PLEVEL) posting level.
You cannot compound noncurrent assets and assets/liabilities to 0BCS_ALTYPE. In addition, you cannot compound to a characteristic from the totals cube, with the exception of consolidation units, partners, and so on, and their higher-level characteristics.
ODS objects / Virtual InfoProvider -
You can generate the ODS objects for additional financial data and the virtual InfoProvider from the data basis maintenance. However, you can also create these manually and enter them in the data basis. If you do this, create the ODS objects and virtual InfoProvider with the same characteristics and structure they would have had if generated by the data basis maintenance. You can only deviate very slightly from this.
You are not permitted to include the following InfoObjects in any InfoProvider, unless they are generated by the data basis automatically:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY
The following InfoObjects must not be contained in the InfoObject catalog, which is defined in the data basis:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY, 0FISCYEAR, 0FISCPER3
Time characteristics -
SAP consolidation SEM-BCS ignores changes with the 0FISCPER, 0FISCPER3, 0FISCVARNT and 0FISCYEAR time characteristics. If you make changes, for instance, if you create hierarchies or attributes, these are not taken into account by SEM-BCS. Therefore, there is no maintenance in the workbench, you cannot use the hierarchies or attributes in the functions of SEM-BCS for selections and so on, and you cannot use the attributes or hierarchies for selections in BW queries.
Characteristic values
The following InfoObjects may have the values set by default by SAP only . You are not permitted to change them, not even by using the BW master data maintenance:
0BCS_AREA, 0BCS_AUTODL, 0BCS_COISRT, 0BCS_CTFLG, 0BCS_DIDIEL, 0BCS_GWMEM, 0BCS_GWPROC, 0BCS_IPAAC, 0BCS_IPATTY, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_REPMOD, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0BCS_TIMMOD, 0CS_COIAC, 0CS_PLEVEL
For these InfoObjects you can only use the tools of the master data service of the Financial Basis to synchronize master data, so the master data is transferred by the SEM-BCS tables to the BI tables, but not the other way round.
Predefined InfoObjects for individual roles
The system automatically uses most of the InfoObjects mentioned here to activate certain data streams. However, there also are some InfoObjects that you must manually enter in the cube for the totals records. Subsequently, you must assign certain roles to these InfoObjects. These roles are allowed for these InfoObjects only, you cannot assign these roles to other InfoObjects.
These are:
0CS_PLEVEL for the posting level role (required)
0BCS_CTFLG for the conversion role (optional)
0BCS_PRGRP for the product group role (optional)
Activate characteristics and key figures from BW Content
Before you create a data basis of SAP consolidation, you have to activate certain InfoObjects from BW Content.
1. You must always activate the following: 0CS_PLEVEL, 0FISCPER, 0FISCPER3, 0FISCVARNT, 0FISCYEAR.
2. If you use documents, you must also activate: 0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR
3. If you use the virtual InfoProvider, activate: 0BCS_REFPER, 0BCS_REFYR, 0BCS_REPMOD, 0BCS_TIMMOD also
4. If you use any data stream in addition to the totals records, also activate: 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8
5. If you use the data streams of the consolidation of investments, activate: 0ACQ_PER, 0ACQ_YEAR, 00BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COISRT, 0BCS_COITOA, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWMEM, 0BCS_GWNEG, 0BCS_GWOFFS, 0BCS_GWPROC, 0BCS_GWRED, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_SEQNUM, 0CS_COIAC, 0CS_COINR
6. If you use organization changes, activate: 0BCS_ORGCH, 0BCS_ORGCHL
7. If you use data streams for stock and delivery data, activate 0BCS_PRGRP.
8. If you use data streams for assets/liabilities or noncurrent assets, activate: 0BCS_ALTYPE, 0BCS_DPER, 0BCS_DYEAR, 0BCS_IPADAU, 0BCS_IPALCM, 0BCS_IPATTY, 0BCS_RETBG
The list of the InfoObjects varies depending on the release. Of course, you do not have to activate InfoObjects that do not exist in your release.
You do not have to activate InfoObjects that are not explicitly specified. However, if you do not activate them, some functions may not be available to you. For example, if you do not activate the 0BCS_CTFLG InfoObject and do not use it for totals records in the InfoCube, the currency translation cannot display any currency translation differences on the initializing data records.
Attributes When you define the InfoObjects in BW, attributes can be assigned to InfoObjects. This results in the following restrictions:
In SEM-BCS 3.1B, 3.2 and 3.5, no InfoObjects that appear in the permanent parameters of a consolidation area or are fixed in a consolidation area may be attributes of an InfoObject used in SEM-BCS.
InfoObjects that are used as a consolidation unit must not have 0FISCVARNT as an attribute.
Note 727776 - Requirements of SEM-BCS for data model
Hope it Helps
Chetan
@CP..
Eugene Khusainov
Re: BCS - Modelling requirements
Posted: Feb 24, 2007 10:56 PM in response to: moini kembly Reply E-mail this post
Hi,
On this phase you should determine and describe the following:
- sources of data to be consolidated (R/3, flat files, 3rd parties)
- methods of receiving/uploading these data into BW
- the appropriate BW objects (characteristics, key figures, cubes etc.)
- time characteristics to be used (is it enough to have only fiscal chars? do you need the calendar ones too?)
- is data upload to be directly into totals cube? if not - consider the intermediate cube. What kind of data transformation is to be done during upload of data from interim cube to the totals?
- methods of getting data into totals cube (flexible upload, reading from datastream, manual entries)
- will you need additional financial data? if yes, which ones and how will you load this data?
- what types of data you need to consolidate (actual, plan, forecast etc.)
- how many chars will be given the VERSION role?
- plan the number of consolidation areas. The best way is to have the only one. it will minimize the customization.
- how many consolidation units hierarchies do you have (for example, if you need consolidated reports according to management and IFRS structure of the group, then you have 2 hierarchies)?
- determine the structure of the group hierarchies.
- what is the group's currency? is it one currency or several ones?
- determine the currency translation methods for each data type.
- make sure that all consolidation units have the same chart of accounts. if not, consider the mapping or transformation of the numbering of accounts.
- consider the currency translation types for different groups of accounts in the balanse sheet (for example, fixed assets and equity - historical rate, retairned earnings - everage rate, non-monetary items - current rate etc.).
- consider the kind of translation - periodic/cumulative for different data types and reports.
- determine the set of consolidated reports as an output.
- which custom characteristics you need to bring to the totals cube in order to get the reports needed?
- which standard chars you'll have to customize and how exactly (bringing new attributes, customizing the std or creating the custom chars)
- if you'll replace a standard char with a custom one, consider that some another chars may depend on the char to be replaced. it's especially true for a company code. if you use a custom char for a company, then you have to use the reference chars for partner company, investee company, allocation company etc.
- will your consolidation units be one-dimension structure (by company) or it is a matrix one? if the latter, what is the second cons unit?
- will the BCS functionality cover all your consolidation needs? if not, consider the workarounds. reclassification is to be considered as a tool # 1.
It's just an incomplete introduction to the issues to be determined during a blue-print phase.
Re: BCS in NW2004s
Re: BCS - Data modelling KF question
Re: BCS - Virtual Cube Query error
Re: BCS- data basis
Re: BCS - Virtual Cube problem
Re: BCS - Consolidation group data
check these links...
http://help.sap.com/saphelp_sem40bw/helpdata/en/67/f7e73ac6e7ec28e10000000a114084/frameset.htm
Re: Synchronize Master Data between BCS and BW within the same SEM system
/message/1508507#1508507 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-sem/dataflow-from-r3-to-sem-bcs-950671
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169 [original link is broken]
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9057475ca611d4b2e30050dadfb23f/frameset.htm
Hareesh

Preparation for Consolidation in SEM-BCS.

Hello All,
Im implementing SEM - BCS (BW-based). I have the following versions:
- R/3: SAP ECC 6.0
- BW: 7.0
- SEM: 6.0
What do I have to customize in R/3 in order to extract the correct data to BW?
Do I have to do all the customization in transaction SPRO (Enterprise Controlling -> Integration: Preparation for Consolidation)?
I know that I have to create the companies and assign them to the company codes. I also have to create group chart of accounts and assign it to the transactional chart of accounts.
Can I do this in the account master data or do I have to have a Financial Statement Version for the Group?
Is it necessary to maintain Transaction Types for Consolidation?
Do I have to customize the Consolidation Staging Ledger and extract the data from here to BW?
I think I have to customize all this, but because all this transactions are in EC-CS customizing and I want to implement SEM - BCS (in BW), Im not sure if this is the right path.
Can anyone help me?
Regards,
Helena

Helena Coelho wrote:Helena Coelho wrote:Helena Coelho wrote:Helena Coelho wrote:
GANSHA,
what you are telling me is:
- I don´t have to do the customization in ECC. The only thing I have to do is, identify the tables and extract the data I need to BW.
But this way, how does the system know, which postings are from group companies or not?
The company code in R/3 is equivalent to company (consolidation unit role) in BCS. The Group companies are created in BCS and the companies in BCS are under those group companies.
If I were you, I would check whether Fiscal Year Variant is same across all company codes in R/3. I would also check whether parallel currencies are activated or not. Non-activation of parallel currency is not issue, but I will try to understand what are all the currencies involved and the currency translation flow.
I have created the companies in ECC in order to fill the "Trading Partner" field in the master data ( vendor, customer and G/L accounts) and to use on FI postings.
Yes, you have taken the right steps.
I have created the transaction types in ECC in order to use them on FI postings.
None of this is necessary? I dont have all the company codes in SAP, some of the data will be uploaded to BW by file.
The transaction types in ECC are different from the transaction types (also known as Movement Types) in BCS. You will continue to maintain the FI transaction types.
Regarding the chart of accounts, I dont have a group chart of accounts. For what I understand theres two ways:
- creating a group chart of accounts in ECC and in BW will be available as part of the GL account master data
or
- creating Financial statement items for consolidation in ECC, Build a Financial Statement Version for the Group (linking the operational chart of accounts to the consolidation items).
I think, this is the only way for me to use the consolidation staging ledger (totals table GLT3)? Or am I wrong?
What you are telling me is that I dont have to do this in ECC, but in BCS customizing?
Im confused ... please help me!!!
Helena
In your ECC, whether GLT3 table is activated? In many clients' companies, GLT3 table is not activated. The GL totals data is available in BSEG table.
If you do not have Group COA/ Group GL accounts maintained now, there are many ways to get GL totals data with Group GL level info added. You have already mentioned the steps.
One more method is create a custom mapping table of Operational GL accounts with Group GL accounts outside R/3 (to be maintained as part of BW) and make your R/3 GL totals data to flow thru this table, so that the final data in BW is available in both operational GL accounts and Group GL accounts. Developers will be able to help you.
Edited by: GANSHA on Jan 11, 2008 8:39 AM

What is help to create prototype of SEM BCS?

Hi guys,
Can give me an idea about the role:"help to create prototype of SEM BCS"?
thanks

hi,
you create window
for secondary window :
right click on window ->create template--> go template tab
under template create TEXT node in that label is hard code
For main window:
right click on window ->create table line-->table tab
under template create TEXT node in that label is hard code
regards,
bhupal.
Edited by: bhupal reddy on Aug 6, 2008 8:19 AM

FI-GL Activating for Consolidation SEM BCS

Hello together,
can somebody tell me in a few steps how to activate the FI-GL (0FI_GL_6) that it can be used for consolidation in SEM BCS. My problem is that FI_GL_6 (and also FIGL_C10 for new FI-GL) have not all required fields for consolidation in SEM BCS, especially movement type is missing.
I know how to use the BCS data collection functionality "load of data stream" and I also know how to activate the BI Content for FI (and how to connect the data basis from BCS with the "FI Cube" via source data basis).
But how can I prepare the FI Cube (DataSource, InfoSource) that it concludes all neccessary informations?
I need following InfoObjects in the BI Content: how to?
these InfoObjects are not containend in the standard FI-GL Business Content...or do you know other possibilities for getting FI-GL data in BW and ready for consolidation in BCS?
0PCOMPANY
0MOVE_TYPE
nicht notwendig
0FUNC_AREA
0COMP_CODE
0PROFIT_CTR
0COUNTRY
0PCOMPANY
0GL_ACCOUNT
Thanks for support

Hi MP M,
Hi Install all the components related to that flow.I mean Datasource,Transfer rules,Infosource,Update rules,Cube.Then nothing is missing in this flow which are in BI Content.
For the Info objects not in the flow
Search them individually from the BI Content and Install them.Later you map them respective fields in the transfer rules manually.Then maintain update rules to them.
Hope this helps
Regards
Karthik

CONSOLIDATION EC-CS Vs SEM-BCS

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. no ALL CAPS in the subject. I'd also recommend that you post in the Consolidations forum instead of here.>
Hi All,
Please explain me the difference btween
1. CONSOLIDATION SEM BCS AND CONSOLIDATION
EC CS.
2. under what circumstances each SEM BCS or EC CS will be used.
3. if possible plz give an example or a scenario.
thanks in advance.
Regards
Sirisha

Hi,
BCS is Business consolidation and Simulation and EC CS is Consolidation and Simulation in ECC 6.0 BCS is entirely out side R/3 and EC CS is R/3, here they have included some features in R/3 for consolidation and at the same time BCS is out side R/3 and has more features....while taking the reports then you take help of BW... end of the day you will get the data from R/3 even for BCS also...
Hope understood
Thanks,
Vasu...

Cartesis Vs SEM BCS Advantages / Disadvantages

Experts
Can somebody guide me, with advantages and disadvantages of implementing Cartesis Vs SEM BCS solution in major business scenarios ?
e.g Comparitive study of these two tools on diffrent business aspects.

This question keeps popping up - doesn't anyone use the 'search' function? - so I'll repeat what I posted, paraphrasing a discussion with a SAP sales director in Australia:
Re: Cartesis solution in SAP portfolio
SAP SEM-BCS is supported until 2013.
but SAP now owns 3 consolidation tools, each is currently valid.
- BCS,
- BPC (from Outlooksoft) and
- Cartesis (from Business Objects) all perform consolidation,
Each has its pros and cons;
- BCS - very good consolidation engine but not so user-friendly.
- BPC - user-friendly but not so good consolidation, also has a non-SAP layout.
- Cartesis - better consolidation engine than BPC but not as good as BCS. More user-friendy than BCS but not as good as BPC, again non-SAP layout.
Although each is currently valid, there will be a combination of the best of all 3 in a new product with a SAP layout (or the same new product will be combined into a new release under the name of an existing product) at a date to be determined.

SEM BCS Time Frams

Hi Gurus,
I just want your expert advice on the following issue -->
I am a FI consultant and having no prior experience in BI and SEM.I have been sent for implementation of SEM BCS to one client where I am looking at everything i.e. BI and SEM for the first time.The client is in apparel business and operating across globe.
Just wanted to know the approx time it shall take to complete the comsolidation process under given situation.
Rds

Hi Amit,
Certain things has to be first known:
Number of company
Type of BCS functionalities used by client.
Extent of testing, documentation, training.
Geogrphical location of teams.
Where is your project based out from?

Difference SEM-BCS and BO PLanning & Consolidation

Hi all,
as announced in the subject. I was wondering what the difference between SEM-BCS and BO Planning & Consolidation is(so referring to the consolidation part)?
Is BO Planning & Consolidation = BO Planning + SEM BCS
Looking forward to your ideas!
Best regards
Hagen

Hi Collet,
Sorry I have no time to make a full-fledged comparison SEM-BCS and SAP BPC as you asked.
Regarding your last link: very interesting information. Thank you very much.
The citation from the article:
Known Limitations
In SAP BusinessObjects Planning and Consolidation (BPC), organizations (i.e. entities and groups/consolidation scopes) car vary according to Category and Time. However, all the other dimensions are static, which means they have neither category nor time dependency. As a result, the model presented here will use static Profit Center and Intercompany Profit Center dimensions.
Eliminations (so called Automatic Adjustments in BPC) are primarily driven by Legal Entity and Intercompany dimensions. As a result, when it comes to Matrix Consolidation, each elimination will still occur based on this fact. So, basically, an elimination is triggered if both an Entity and the Intercompany entity are being consolidated under the same node (i.e. Group or Consolidation scope). In other words, BPC does not evaluate as such the Profit Center and Intercompany Profit Center dimensions when it comes to performing eliminations. Amounts will be eliminated based on the Legal Entity view. However, it is possible to analyze and group eliminations by Profit Center later on. As a result, Matrix consolidation will heavily leverage the reporting/filtering capabilities of the product.
I'm afraid that in SEM-BCS' sense the Matrix consolidation has much more deep meaning than that presented here.

Consolidation SEM BCS Vs EC CS

Hi All,
Please explain me the difference btween
1. Consolidation SEM BCS and Consolidation EC CS.
2. under what circumstances each SEM BCS or EC CS will be used.
3. if possible plz give an example or a scenario.
thanks in advance. i apperciate for reply.
Regards
Sirisha

Hello
SEM BCS and ECCS both are consolidation applications of SAP System.
ECCS is based on R/3 where as SEM BCS is based on BW.
There are no special circumstances, however SEM BCS is the latest version. Moreover the recent direction of SAP is towards BPC u2013
Business Planning & Consolidation.
Hope this helps.
Ambadas

Transfer Under SEM-BCS

Similar Messages

Maybe you are looking for