Transfer video message file

How do I transfer a video message from Skype to another Windows program file? Thanks in advance.
Spoiler (Highlight to read)

First, you need to save the Skype video message with TalkHelper, then you can send the file to another application.
Record Skype calls, save Skype voicemails and video messages easily with TalkHelper Free Skype Video Recorder on Windows for FREE!

Similar Messages

  • How do I transfer video/photo files from a netbook to my mac?

    I used my Acer netbook basically as a hard drive while on vacation to download video and photos to free up my cameras. How would you recommend transferring these to my iMac now?
    Thanks for your help!!

  • IChat File Transfer/Video Chat won't work... :(

    Hi Everyone,
    I am trying to get ichat to allow file transfers/video chatting on my Mac, I have a feeling that the setup through the routers that we have are not allowing it to function as it is constantly giving me errors. My set up is a Cable Modem hooked into a Netgear WGR614 v6 and then an ethernet wire running from that router to a Linksys WRT54G v8. I have the WRT54G set up with the following settings:
    IP: 192.168.1.136
    Subnet: 255.255.255.0
    Gateway 192.168.1.1
    Static DNS 1 and 2: Are my IP's DNS servers
    Static DNS 3 is blank
    Local IP address is .199 with a subnet of 255.255.255.128
    I have DHCP enabled starting at .200 with 30 users
    My computer is also set up statically at port .233.
    The Netgear WGR614 v6 is set up with the following settings:
    Get IP/DNS dynamically from ISP
    DHCP Range from 192.168.1.2 to 192.168.1.51. Router is on a subnet of 255.255.255.0 the linksys is set up statically to the Netgear
    SO, this brings me to my issue, I am trying to get ichat file transfer/video to work, I have followed the instructions for setting up portforwarding from portforward.com for ichat on both the netgear and the linksys. On the linksys, i set the IP address to forward to as my computers (.233)
    On the netgear, i set the ip address to forward to as 192.168.1.136 (the static IP of the linksys).
    Anyway, I am hoping someone can point out what I am doing wrong as I am still getting this error: An AIM error has occurred. Unable to talk directly to your buddy. I am also getting this error: An AIM service error occurred. The server message was: Serv:RequestTimeout.
    My OS X firewall is off.
    THANK YOU SO MUCH FOR YOUR HELP IN ADVANCE!!

    Hi,
    I am not sure I have understood your Networking here.
    You say the Netgear is getting an IP (Via DHCP) from the ISP.
    You go onto say it is at 192.168.1.1
    It issues IP addresses from 192.168.1.2 through 192.168.1.51 and the Linksys has an IP outside this range at 192.168.1.136
    Your computer is at 192.168.1.233
    As both devices are using the 192.168.1.xxx group and doing DHCP (even with restricted groups) how does the computer know which one to connect to ?
    You should be able to change the group that each device is using for it's own network (I would suggest the Netgear)
    You should also turn Off DHCP (to the LAN) in the Netgear so it's own network (subnet) only goes as far as the Linksys.
    Similarly in the Linksys make sure DHCP is Off or change the Mac to use Manually (Static) with DHCP.
    Both devices can do UPnP found in the Administration tab in the Linksys and the WAN page of the Netgear.
    Turn Off/disable all Port Forwarding in both devices.
    It may also pay to copy across the Linksys and Computer the DNS server IPs from the Netgear.
    2:47 PM Wednesday; August 29, 2007

  • Mavericks/Bonjour Messages File Transfer Fail

    Last week all of our computers running mavericks suddenly stopped being able to send and accept file transfers. The older computers running 10.6.8 can transfer between each other, but not with any running 10.9.
    I have tried networking two computers together using a simple switch and no wireless connection and still get the same results. I've tried new plists, restarts, etc. It seems like I've tried everything I can think of, but none of our new computers can use the file transfer in messages that we used to use constantly.
    The messages connection doctor shows no problems and "full cone" on the router capabilities. The video/audio chat works as well as screen sharing.
    At this point I'm just out of ideas.

    Hi,
    I have a Snow Leopard (iChat 5) and a Leopard (iChat 4) computer.
    I have done Bonjour chats between both of those and my Mavericks computer.
    I can Send and Receive File (pics-in-Chats)  to and from the iChat 4 machine but not to the iChat 5 one.
    I have yet to find the time to check Jabber and AIM chat as well.
    With jabber the file sending is on the same port as the Login (either port 5223 or port 5222)
    In an AIM conversation it moves to a UDP connection on port 5190.  Since iChat 6 Logins have been on port 443
    Bonjour is not clear as to which port is should use, but port 5298 on UDP is most likely.
    Full Cone does not mean the port(s) are open  but it is more likely that they are.
    If this is Bonjour over local traffic it is even less likely they are closed.
    10:14 pm      Friday; April 25, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HOW CAN I TRANSFER VIDEO FILES FROM MY PC TO IPAD MINI VIA ITUNES??? WITHOUT ANY ADDITIONAL DOWNLOADABLE APP

    HOW CAN I TRANSFER VIDEO FILES FROM MY PC TO IPAD MINI USING ITUNES???  i have to google every little thing that has to do with my ipad, why cnt they make it more user friendly???? i have to dl another app just so ican transfer vid files to mu ipad mini. i already converted them to the proper format. i just cant seem to find out how to transfer with with only itunes

    im just new to itunes and ipad mini is my first apple product thats why im really having a hard time with this. i cant transfer the video file to my library... i tried dragging it to the "movies" part in my library but it still doesnt copy to the movie librarry just like how i do it with my songs.. not even the typical list appears.... all it says is movies and studd about the library and itunes, ill post a pic so u can see...

  • How to transfer video and audio files from windows PC to new ipad?

    How to transfer video and audio files from windows PC to new ipad?

    iTunes: Syncing media content to iOS devices and iPod
    Sync with iTunes.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums, artists, playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Follow the same procedure for Movies.

  • How can i transfer video recordings, messages and contacts to computer?

    Hi
    how can i transfer video recordings, messages and contacts to computer... please guide me through..
    regards

    You should read the iPhone user guide. Answers all these questions.

  • How to transfer video files from Sony Handycam DCR-SR42 to Mac?

    How do i transfer video files from a Sony Handycam DCR-SR42 to Mac?

    First suggestion would be to read your manual that came with the camea for proper cable use for transfer.  The iMac has a FW800 port and also USB2.0 port.  Once connected you can import them into iMove and edit them from there.  Some Sony codecs may require converting. 
    Firewire Cable is first needful thing.

  • I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

    I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

    Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.

  • How to save video messages to a file on Mac?

    How to save video messages to a file on Mac? Please, help. Thank you.Claire

    Claire, I use a Mac w/ the latest copy of Skype and it IS possible to first play the file and then download it.  Steps are available for it but it involves some technical wizardry that can be above some muggles.   Then I found a post where some some VERY bright person made a small downloaded program for the Mac which once the video message has been played recently, you can run this program and download the file for safe keeping ( ALWAYS BACKUP or store it in the cloud for safety )  Kudos are deserved to user alvarop for this! http://community.skype.com/t5/Mac/Video-Message-Exporter-App/m-p/2351609 It worked for me to download a video message that I recently played back.  Let me know if you need any assistance getting it downloaded you can PM me on here and I'll be happy to help with a screenshare. Best Regards,-Shawn G

  • Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

    Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

    MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

  • How do you transfer video files from the iPad to a separate device?

    How do I transfer video files from my iPad Air to a separate device or storage device so that I free up memory on my iPad

    You can directly transfer photos and videos via WiFi between the iDevices, PCs, and Macs with an App like Photo Transfer.
    See: https://itunes.apple.com/us/app/photo-transfer-app-easily/id365152940?mt=8
    Or you can upload the photos and videos to the Dropbox service using the Dropbox App on the iDevice, PC, or Mac and download them to the another device using the Dropbox App on that device. By the way, once the videos are on Dropbox you can share them with others.
    See: https://itunes.apple.com/us/app/dropbox/id327630330?mt=8

  • Can't transfer video file

    OK so I'm using the video feature on my 8700 XpressMusic for the first time, and I want to transfer videos to my PC.  I'm using Mass Transfer Mode, and when I view the files on my PC screen the video I'm looking for isn't there (although all the photos are), yet I can definitely see it in the gallery on the phone.  Can anyone suggest why I can't see it?

    connect your phone to the computer and use media transfer after that when you see the folder in the pc you would see their memory card and phone memory.the contenst of the would ne the same as the file manger in the phone if you know how to open that(if not on the phone go to eitheir appliaction or setting to see file manager)after choosing the memory of choice go to the folder were the video is loacted or you can use pc suite how to do
    website of the country of location the click get support and software/pc suite after downloading and the instalation go to transfer videos and you can transfer the video using that
    i hope this would help

  • MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

    MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • Cannot transfer videos taken from my Canon camera(MOV files) to the iPad 4. They have previous with no problems at all. Is this an update issue?

    Cannot transfer videos taken from my Canon camera(MOV files) to the iPad 4. They have previous with no problems at all. Is this an update issue? I tried to sync them over using iTunes last night but it says that they cannot be played on the device. But they have previously

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Maybe you are looking for

  • Connecting to a SOAP web Service

    For my sapp I want to connect to a simple web service . This web service has Several functions .They each accept some arguments and return End result.. The web service is being activated but it always returns an answer of zero (NULL ) which makes me

  • Date and time stamp transfer via Firewire

    Hi Having issues with a Sony micromv camcorder transferring digital recordings via fire wire to Apple macbook- the files are transferrred without the date and time stamp on it. Any way around the problem. Thanks

  • How can I know which line contains the error in JSP

    Hello, I got following compiling error: ava.lang.NullPointerException      at org.apache.jsp.temp1Public_jsp._jspService(temp1Public_jsp.java:252)" Is there a way I can know in which line of the jsp page the null pointer exception occurs. "line 252 "

  • Camileo S10 saves recording in AVI format

    Hi from Spain, I've just received my Camileo S10 bought from an online reseller. I choose the S10 because all over the web, people says that it records .MOV files which is perfect for me as I'm willing to edit the recordings on my Mac using iMovie. F

  • XLE Tables and columns while creating accounting for AP invoices.

    Dear All, Could anybody please tell me what are the columns of the XLE tables gets hitted when i am creating accounting for an AP invoice? Also Please let me know from which tables and which columns, i can get all eligible invoices for payment? any c