Transfer video problems with FCE and Quicktime 7.6?

Are there any problems tranferring video with the new Quicktime (7.6)? I stopped downloaded upgrades to Quicktime last year when I could only transfer 5 mins of video at a time with Quicktime 7.3 (or 7.1.3).
Apple makes these upgrades so now I can't use iTunes or new Pages without upgrading Quicktime. However, i've heard there are still problems with digital video transfers etc.

Just for your info: I bought FCE HD3 in 2006, I had Quicktime 7. But when Quicktime 7.1.3 came out a year or so later - that's when I had to go back to using QT 7. Which meant I had to spend several days rebooting the entire system back to what it was when I bought it.
That cost me a lot more than what the Xpress was worth.
But I really do appreciate your advice. It saves me doing the same again. My complaint is, why can't Apple answer these questions themselves? My dealer could not even get an answer.

Similar Messages

Problem with itunes and quicktime

I installed the lastest version itunes, then itunes crashed on me, then microsoft crash analysis popped up with a message to unistall quicktime and then to repair itunes. So I did that and now itunes will not work and when I click on the itunes icon I get an error message about quicktime. I tried a system restore, and I tried downloading quicktime sepeartly, but I still get the same error message. I haven't tried re-installing itunes yet because I'm afraid of losing all of my music, help!!!
ibm Windows XP
ibm Windows XP

Katrina, maybe you can give me some information on how I can get the iTunes program installed, so I can install my music on my Ipod.
I've tried to install the iTunes program on my computer but every time I try to open the iTunes program after clicking on the iTunes setup, an error message always appears saying it need to close and if I want to send the error message to Microsoft or do I not want to send it.
I cannot understand this problem. I bought my Ipod over a year ago and I had the iTunes program installed on this computer and it was working fine, and when I tried playing a video that I had purchased from the Music Store, it would play the video but it wouldn't play the audio. I also had the other version of that same song, where it would only be the audio version, and when I would play that, it would play the audio. When it didn't play the audio and it played the video, I ended up erasing the whole program and erasing all of my music from my Ipod, when I restored my Ipod. I knew that all of my music would be lost when I restored my Ipod. I've been trying everything to get the program up and running again on my computer. Do you have any information on what I need to do in order to get the iTunes up and running again?
Pentium Windows XP

Having problem with transcription and quicktimes

I work with Liveops. Am on their transcription team. Have downloaded the quicktime pro. Still cannot get the audio to work on my computer. If someone wants to help me feel free to email me at [email protected] Am frustrated since I am a computer novice. thanks.

Yes, I tried several times, but I always have the same problem, this is the problem that I have.
Error! Cannot initialize the hard drive. Check the hardware configuration. Note: LabVIEW Real-Time supports Parallel ATA hard drives and Serial ATA hard drives. Serial ATA hard drives must be configured to use "compatibility" mode to appear as a Parallel ATA drive, or to use "AHCI/RAID" mode to appear as a Serial ATA drive.
The strange thing, is when I turn on the computer, it shows that I have the hard drive connected, and I changed the in the BIOS configuration to make the hard drive compatible, I can't format the hard drive with the USB utility either.
Please, I really help need on this.
"Everything that has a beginning has an end"

Strange Problem with FCP and Quicktime

Hi,
I finished an edit off yesterday and expotrted in 2 ways ones a uncompressed Quicktime movie. (I am running FCP so it's called an FCP movie) and a compressed version botth are 2' 42" long.
When I import the compressed verion back in it plays fine. When I import the uncompressed FCP/QT movie back in the time line stops and starts. The audio plays, but the video element just won't play properly. I am running QT 7. Does anyone have any thoughts why?
cheers, Dame

Hey Man,
We don't have a lot of luck explaining stuff to each other do we! Remember when I had problems over exporting FCP as a QT uncompressed movie. You were getting a bit shouty as you thought I wasn't listening and it turned out in FCP 3 to export as a QT uncompressed is actually called Final Cut Pro Movie in the Export Options?
Anyway, I meant I was having problems importing an uncompressed QT via a firewire on to my timeline. But in a strange backwards sort of way, by doing the complete opposite of what you suggested, you pointed me in the right direction!
Thanks for your help once again buddy.
Dame

Video problem with leopard and G5

I'm using a 19" Insignia video monitor and a G5 running Leopard 5.8 and everything was fine until I decided to try and switch the video resolution. Well i hit a resolution that was not supported and the screen went black and it said resolution not supported. fair enough so I restarted and the screen still came up black. I tried looking for prefs and trashing them but no go. I know the monitor is fine because it works in safe boot. I tried changing the resolution in safe boot but it doesn't stay and when I boot normally it goes black again.
Bottom line is how do I reset the display pref to what it was before I changed the resolution. This is very frustrating and should be a simple fix but any info would be greatly appreciated as I've spent hours trying to resolve this issue.
Thanks for any info.
Jeff

Hi Jeff, I think had you waited a few seconds before reboot it would've given you the choice to accpt or not, but...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
Trash these files...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.windowserver.<12digitHex#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist
There may be more than one of each of the above, then trash...
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
Reboot

ITunes / Quicktime Video Problems With Windows VISTA

I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
PC Pentium 4 Other OS Windows Vista Home Premium

I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

Problem with youtube and other video websites

I have a problem with youtube and other video websites:
Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
grts,
agrash

Hmm, so that person had a conflicting plug in.
Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening.

How can I transfer video taken with my iPhone to my iPad WITHOUT using a computer or iTunes? I'm going to Europe for a month and want to use my iPhone to take pics and video, then come back to the hotel room and use my iPad to edit/store each evening. I don't want to use my iPad to take the video...too large/bulky. And I WON'T have a computer with me...I purchased the iPad to take with me so I could use the RDC to my home computer and avoid taking my computer at all. Is this possible?

here is a cheaper solution than camera kit and a lot easier if you have WIFI available.
I use the PhotoSync APP (I think its a $1.99) will transfer videos and photos over WIFI to any other IOS device or even PC/MAC. Great app since I like doing video and photos on my IPHONE and transfer to IPAD2 without synching through computer or doing cloud based storage.
You can even send photos/videos from your MAC/PC to your IOS devices that way too. Makes it so much easier.
Here is the link;
http://www.photosync-app.com/

Video problem with 10.4.2 Tiger

I have been tryig to get video working on my iMac 2Gz with iSight. With the help of several members I have tracked the problem down to strange issue. I can connect to others and the Apple test server and get 15+ frames per second from them. My FPS starts at 15 but quickly declines to 1 with very poor bitstream. I have switched off all other applications including widits but still get the same. I am on a wireless connection but have checked that and it shows an upstream bandwidth of 250kbs normal for broadband in uk. Downstream is 2mbs. All settings with iChat and Quicktime are set to broadband. Anyone got any ideas on this?

HI Kenneth,
If you upgraded from Panther and had Virex on there that is you problem as it does not work in Tiger.
Other suggestions are in the post at the top of the Discussion area called Trouble Shooting Revisted.
Ralph

Problems With Syncing and Audio Play with Itunes

I've been having a problem with Itunes and my iPhone for the past few days. First of all, iTunes will not play any songs. When I press the play button, the speaker changes to the play picture, and the song loads at the top, but the timer stays stuck on zero. Also, when I attempt to sync my iPhone it will not add new songs downloaded onto my phone. I have updated and re-installed iTunes and it has not helped. Also, tonight I even updated my phone settings (which I interestingly enough was able to do despite the fact that I cant get a song to transfer to my iPhone, yet somehow the new program settings were able to make the jump.)
I am using Windows Vista at the moment. Does anyone have any idea as to what could be going on? Any help would be greatly appreciated.

Hi,
Have you tried backing up you iPhone and copying over everything to iTunes etc.Apps,Videos...Then Restoring to factory setting?
If that doesn't work try Manually Managing you Music and Videos.

Problem with Windows7 and Adobe Flash freezing computer?

Hello All, There is a problem with Windows7 and my Adobe Flash causing my computer to freeze. So, Skype, videos, etc will not work. Have tried many things to solve problem. Can Oracle VM be used to run a different operating system...such as XP or Vista where Flash will work properly? I would hate to have a new operating system installed on a new computer. thanks

If you mean Oracle VM VirtualBox, then yes, definitely. A free download, it installs and runs great on Windows 7. http://www.virtualbox.org/

[SOLVED] Problem with zsnes and xcb_io.c on arch64

Well after doing a pacman -Syu, zsnes won't start, when i run it, it gives me the next output
[pablo@pablo-laptop ~]$ zsnes
ZSNES v1.51, (c) 1997-2007, ZSNES Team
Be sure to check http://www.zsnes.com/ for the latest version.
ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.
Use ZSNES -? for command line definitions.
Starting Mouse detection.
Unable to poll /dev/input/event11. Make sure you have read permissions to it.
Unable to poll /dev/input/event10. Make sure you have read permissions to it.
Unable to poll /dev/input/event9. Make sure you have read permissions to it.
Unable to poll /dev/input/event8. Make sure you have read permissions to it.
Unable to poll /dev/input/event7. Make sure you have read permissions to it.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.
zsnes: xcb_io.c:515: _XReply: Assertion `!dpy->xcb->reply_data' failed.
Abortado
it was working fine until yesterday, i've been searching about xcb_io.c but sadly i haven't found anything useful.
Edit:
it seems i can run it fine as sudo but not as a regular user
Edit2:
well it seems that there was something wrong with my .zsnes folder, i deleted it (well first i made a backup of it) and i can run zsnes again.
Edit3:
well, it seems i got a problem with opengl and my catalyst driver (but i'm guessing because i haven't tried with radeon) because i can use it without opengl but as soon as i change the video option to use opengl it crashes with the same error (zsnes: xcb_io.c:515: _XReply: Assertion `!dpy->xcb->reply_data' failed.) should i file a bug report or something???
Last edited by jpablo (2011-08-30 17:12:55)

Finally i had to edit my .htaccess file adding a RewriteBase rule to it.

Problems with Mail and Safari

Hi,
I'm running OS 10.11 and am having some consistent problems with Mail and Safari on my MacPro Dual 2.66. Here they are:
Sometimes, for no apparent reason, selecting these applications from the dock no longer opens the application (or a new window if already opened), but causes them to be revealed in the finder.
In Safari, when this problem occurs, another symptom seems to be that new windows will ONLY open in a new tab, even though I have preferences set to open links in a new window. If I click on a bookmark within a folder in the bookmark toolbar, Safari will open ALL the bookmarks in the folder in new tabs!!
In Mail, when I open my Inbox, clicking on various messages will highlight (in blue) ALL the messages I'm clicking on, instead of simply displaying the highlighted message in the reader.
The only way to get things back to normal is to reboot my machine, which is getting to be a total drag, especially since this seems to happen fairly often.
One other thing that may be related- if my screen saver is running, and I move the mouse to go to an active screen, the computer will "freeze." It stays like this indefinitely- I figured out that if I press the button on the machine itself it will go to sleep, and I can wake it up and then everything is fine, but I don't understand what's going on.
I have tried using Disk Utility and Disk Warrior, and have used OnyX to clean out my system cache and aall sorts of other stuff, but to no avail.
Is anybody else experiencing any of this? I'm starting to get really frustrated. Thanks for any advice.
Cheers,
Andrew

Scott,
I had posted earlier that I had Flash payer problems and then QuickTime and PDF preview problems too, on my Intel PowerMac. I could not figure out what the problem was, because fixing permissions and moving plugins did not work. Console indicated that the Quicktime components were not found, with the problem in a webkit pref file somewhere (nil field value). Anyway, I bailed and reinstalled Leopard from a 10.5.0 DVD, and then updated using the combo updater to 10.5.3. Everything worked. Then, after the 'Java for Mac OSX 10.5 Update 1', it all broke again. This time, repairing permissions resulted in:
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
Now it all works again. This is obviously a flaw with the Java update, and also somehow Disk Utility did not find it earlier. Anyway, take a look at reverting the Java update, or manually changing user for those files (I suppose user 0 is root, but maybe it is nobody).
Obscure....

Transfer video problems with FCE and Quicktime 7.6?

Similar Messages

Maybe you are looking for