Transfer video to FCP7 and get white image.
I've been off FCP7 for well over a year and have forgotten things. However, I shot HD with Canon 50D and when I import from the card the clip is there but when I click to Viewer it only shows white (in 16x9). When I hit space bar the video plays but when I stop by space bar the viewer screen again is white?
I've never seen that before. Same with photos.
And FCP crashes almost every time unless I save the clip quickly.
Make sure the viewer is set to display RGB and not Alpha:
MtD
Similar Messages
-
How can i transfer video recordings, messages and contacts to computer?
Hi
how can i transfer video recordings, messages and contacts to computer... please guide me through..
regardsYou should read the iPhone user guide. Answers all these questions.
-
The best way to transfer videos between devices and mac?
I have an iphone 4s, ipad and a macbook pro - is there any way to transfer videos wirelessly betwen these platforms?
As far as I know icloud only allows photostream of photos only but nit videos. This is quite inconvenient for video users as I normally take videos using my iphone 4s and would like to edit using ipad/mac's iMovie. I suppose I could transfer videos using a wire between iphone and Mac (still a PAIN without being able to transfer wirelessly), and what about between iphone and ipad? I understand Apple might be concerned about storage and speed for video transfer via icloud, if we could selectively do the transfer and have the option to delete them from icloud after the transfer it will be very much easier for video editor like myself.
Or have I just missed something? Is there indeed a way to do so??If you want to transfer photos and videos from the Mac to the iPhone (but not in the other direction) you can use iTunes and sync via wi-fi: http://support.apple.com/kb/HT1386
If you want to wirelessly tranfer videos in the other direction you may want to look into a 3rd party app such as http://www.photosync-app.com Note that I have not used that app so be sure to investigate others as well. -
Best way to transfer video between iphone and mac wirelessly?
Please suggest me the best way to transfer files between mac and iphone wirelessly.Mainly for videos.
If you want to transfer photos and videos from the Mac to the iPhone (but not in the other direction) you can use iTunes and sync via wi-fi: http://support.apple.com/kb/HT1386
If you want to wirelessly tranfer videos in the other direction you may want to look into a 3rd party app such as http://www.photosync-app.com Note that I have not used that app so be sure to investigate others as well. -
When I open a HTML document in Safari rather then getting an image, I get a ? in a box. Why is this and how can I change it to get the images back?
monkeyde,
You are getting entagled in the two confusing meanings of the term pixels, namely as a unit identical to points and equalling 1/72 inch, and the basic component of raster images (and effects).
You can read on in this very recent thread:
Is there a way to get Illustrator to know how many pixels are in an inch? -
Switching users and get white screen
I have now had this happen twice, and it seems to be a mountain lion flaw. I am either logged in and switch users; or I am logged in, it goes to sleep, I wake it, and then switch users. I cannot isolate it completely, but I get a white screen. I am able to move my mouse, but everything is white. I eventually have to just shut it down. I have reset my PRAM, and at a later time even unplugged my computer for a little and rebooted. It takes a few days to get it to reoccur. I think it is isolated to the following scenario, but not positive: I am working on my user, leave my computer, come back and it is a sleep, wake it from sleep, and then switch user, and then WHITE SCREEN where mouse cursor can be moved. I am using a Mid 2010 imac.
Please Help,
SamThe 10.8.1 seems to have fixed it from locking up completely, but the transitions between usres is still slower than Lion. At least no freezing up yet.
-
How tcan i transfer video recordings, messages and contacts to computer?
how to transfer video recordings to computer? only pictures are transfered....
You should read the iPhone user guide. Answers all these questions.
-
Trying to export movie from QuickTime Pro to AVI and getting white screen
Hi there,
I am trying to export a movie from QuickTime Pro to an an AVI file. It goes through the process as if everything has worked, but when I open the finished file, all I get is a white screen with no audio or picture.
I need to save lectures from school from the school website to my computer so that I can watch them when I do not have internet access. QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie..
I need some way to get the files to my computer. Any suggestions?I am trying to export a movie from QuickTime Pro to an an AVI file
AVI is just a container ... specifically, which codec are you using when exporting? And why export to AVI?
QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie
That usually means that your system doesn't have the codec installed needed to view the video, but your web browser is using a plugin that does. What format are the web videos? Flash?
-DH -
Colour and Black & White Images
Hello,
I was just wondering about how can i classify or check if:
an image is colour or black and white?
Thank you very much for your help.Couple of ideas....
Some graphic file formats give the number of
colours.
if that is 2, then it's a monochrome picture
But I think the real question you're asking is, how
can I tell if an image is
grey scale.
You'd have to go through each pixel in the image, and
check.
When specifying colours in RGB, grey colours are
easy enough to check.
Eg.
( 0, 0, 0 ), ( 100, 100, 100 ), ( 148, 148, 148
)..... ( 255, 255, 255 )
So, if I'm correct.... the following function would
check a single pixel....
public boolean isGreyScale ( Colour aPixelColour )
int r = aPixelColour.getRed();
int g = aPixelColour.getGreen();
int b = aPixelColour.getBlue();
if ( ( r == g ) && ( g = b ) )
return ( true );
else
return ( false );
}regards,
OwenThe problem is that my program is a image searcher tool.
I have a large number of images and i need a good searching technique. If i have to go through each pixel in every image, it will take too long for an effective application.
thank you very much for your help -
Starting Mac pro and getting white screen
Help did restart on restart got some normal sound did not get the apple icon nor the spinning circle. Turned off left it turned on same outcome.
What should I be doing?Step by Step to fix your Mac
Create a data recovery, undelete boot drive -
How do i transfer videos between FCPX and Motion 5?
there is no "Send To" option. The only option i have is under "Share" and it is "Send to Compressor"
Basically, the only work-around is to create a new project containing the exact clip (or section of a clip) you want to "send" to motion, export that project (to quicktime), then open that exported .mov in motion. Do whatever you want to do to it. Then, export the motion project to quicktime. Finally add that result to your FCPX event/timeline where you want it.
We can only hope that Apple will add back the "Send to Motion" feature and rectify this glaring inadequacy. -
How can I try and get an app featured on New and Noteworthy?
I am launching a new app and would like it to be considered for the New and Noteworthy page. Any suggestions on how I can approach this?
Hi,
SAVE an image of any non-SAP System or SAP System (SAP BPMce) on SAP ABAP Transaction
and GET an image and set on output of my ABAP Proxy, so that my ABAP Proxy, send the image to non - SAP system or SAP Java System (SAP BPMce)
You can transfer the image file as a binary stream between the two systems(could be SAP/Non SAP), so one of the parameters on the MI would be an XString, along with others that will help you classify the data at transaction level.
Also, go through the below link where i have tried to answer a similar question.
Decryption of binary data in SAP
Elaborate, if you need more specific answers about your requirement.
Regards,
Chen -
Can I transfer videos with iCloud's
Can I transfer videos with iCloud from one ios device to another?
Welcome to the Apple Support Communities
I'm sorry, but you can't transfer videos to iCloud and you can't increase local storage after buying the device. If you want, you can put your videos on Dropbox or a similar cloud service if you don't want them on your iPad storage -
Hello: I just downloaded a movie but I cannot any video when trying to watch it. I just get n image of white and grey squares. Sound is ok ???
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
How do I get Image Capture to recognize my iPhone so I can transfer videos to my MacBook ?
I cannot delete my old email from my Apple Discussions Profile.
I have an iPhone that is not letting me transfer videos I take with the Camera App onto my MacBook Air.
My photos transfer fine but the videos don't transfer at all.
I have tried Image Capture too and this does not even recognize my iPhone.
I have tried different USB cables and still no luck.
Even though one workaround is emailing videos to myself from my iPhone
this is not ideal because it compresses the files - thus losing video quality - and
it is super time-consuming because I have long videos that I need to break up into smaller clips
in my emails and I have almost 200 videos in all.
I think I have iPhone 5 but I don't know how to confirm.
Please advise.
Many thanks
<Email Edited By Host>In Image Capture, a network printer / scanner will appear under "Shared". If it is hidden, a number will appear adjacent to it, representing the number of hidden devices.
If it still does not appear, try resetting the printing system: Mac OS X: How to reset the printing system
After you do that you will need to add the device again according to the instructions here:
OS X Mavericks: Set up a printer
Follow the instructions below Add a network printer
Also read:
Troubleshooting printer issues in OS X
Maybe you are looking for
-
As I stated above, There is a Facetime error. can someone please help?
-
CFP2120 remote panel shows "downloading panel 0% of 0 bytes" but never loads the panel
body {margin:8px} .LW-yrriRe {font:normal x-small arial}Good morning, I've been trying to run a remote panel with a cFP2120 upgraded to LabVIEW 2009 & fieldpoint 6.05 (it was on labview 8.5 with 6.01) to no avail, the program runs ok in the projec
-
I have table which has 4 columns (A,B,C,D) Table t1 A B C D 1 - - - - 2 - - - - 3 - - - - 4 5 - - - - 6 - - - - 7 - - - - 8 the required output is Table T2 A B C D 1 2 3 4 5 6 7 8 How can i come up with this output
-
Re: Trade-ins Not Showing Up
I just traded 2 games in yesterday and ran into the same issue. After checking my receipt and reviewing the online trade in prices, I did not receive my 10% either. It took 10 minutes to trade in 2 games and didn't even receive my 10%. How difficult
-
Windows Vista 32 bit 6.20 crashes all the time
Since when I updated Skype a while ago, I have been having this problem. I had solved it by installing an older version of skype, but it stopped working a month ago and I had to install 6.20. But it never works now with the following message, any ide