Transfer vision from DVC PRO 50 to XDCAM for Final Cut Express

Hi there friends....
I would like to transfer vision from DVC PRO 50 to XDCAM 700.
Can you please advise the best/quickest method.
Regards

Hi Flore
This a huge debate. There are very few advantages to the new AVCHD camera's and the vgery long list of negative aspects of AVCHD camera's outweighs any usefulness of them. They are designed for Grandad to pick up and shoot good quality pictures and not for editing.
I have posted below the wiki address for AVCHD, please read the page. It is very important you do read it. It explains in depth about AVCHD.
I feel the is no real place for the hard drive based AVCHD camera. There is a place for a mini-dv tape based camera.
Life will be very hard if you go the Hard-drive camera route. Stay with tape.
Tape is cheap, hardy and easy to move around. Hard drives not so!!!
Take some time to read the following wikipedia page...PLEASE READ THIS PAGE!!!
http://en.wikipedia.org/wiki/AVCHD
You will see that AVCHD is not all the bee's knee's.
I personally hope it dies an extremly painful agonising drawnout death.
AVCHD has no place in the professional domain.
Justin... Durban.. South Africa

Similar Messages

Final Cut Pro X workarounds for Final Cut Express users?

I'm new to FCPX after using FCE for 6 years (I don't know if I was the last FCE holdout out there). While there are some neat features of FCPX, I couldn't help but notice some glaring omissions (to me at least), of which I discovered a workaround. So, I'm posting what I've discovered so far:
1. No text XY coordinates in Titles. FCE let you set the origin of text location by typing in XY coordinates.
Workaround: Don't drag the text's position, keep it centred. Double click the title on the timeline, and under "Video" in the inspector you can adjust the XY coordinates of the entire video.
2. Titles with transitions latch on to the nearest video. As FCE was track-based, the empty space on the track before it let you simply "fade in" the effect so to speak, so the video remained unchanged while the title transitioned in.
Workaround: Create an empty title before your desired title and use the transition between those two titles. You are essentially "creating" the empty space that was formerly in a track.
Also, if there are official answers to these without workarounds, I will gladly hear them. I might add on as I acclimate myself to this. Feel free to add your own that you've come across (I couldn't find a thread like this, even way back when X first came out).

IIf you use the transfirm function in the viewer the XY coordinates appear in the upper left as you drag. Or as you say you can dial in XY values for the title in the video tab. Not sure what the problem is with that as a positioning scheme.
How a transition effects the title is depending entirely on the transition. They are all different and have different behaviors. A fade up using a cross dissolve does not require a blank clip in front of it. Some transitions also have a preset to effect from black which can be overridden by right-clicking on them.

Is the NVIDIA GeForce 8800 GS worth the money for Final Cut Express?

Hi,
I'm considering a new iMac 24, but not sure if the speedier on is worth the money.
Currently I use a MacBook Pro 2.2 for Final Cut Express with a 23" cinema (mostly DV, some HD) and that works okay, but won't play back in real time when I composit video.
Anybody know if the NVIDIA GeForce 8800 GS will help in that area?
Thanks,
KC

The speedier video card is great for 3D stuff, but it won't matter a wink for Final Cut Express, which barely makes use of the video card.
Keep in mind that Final Cut is using the CPU, not video card, to perform the editing, decoding, and encoding of the video. The only time the video card comes into play is during playback of the video, and any of the video options available for iMacs will handle that just fine.
When you composite video, the hard-disk throughput will start to come into play. The dinky 5400 RPM disk in your laptop will adversely affect the performance of that.

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5. I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
2) Use one of the following methods to install FCE 3.5 into Mavericks:
a) Pacifist: http://www.charlessoft.com/
b) Jeremy Johnstone's Terminal method: http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function. FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

Interfacing Video Camera to Mac Pro for Final Cut Express HD Use

I have a lot of Video8 tapes that were made on my Sony DCR-TRV310 that I want to move to my Mac Pro and edit with Final Cut Express HD. The Sony camera only has the three (R,Y,W) output ports and my Mac Pro only has firewire input ports. Does anyone know of a cord solution or do I have to use an additional interface. Thanks

Hello,
Unfortunately there is no "cable solution" You will need an external interface. Something along the lines of an external tv tuner. Elgato Systems makes a few, i've had great success with the Hauppage WinTV PVR USB2 Tuner. This cost me about 150$ Canadian and is compatible with Mac's after a software download from the manufacturer's website.

Final Cut Pro 4.5 and Final Cut Express 3.0 - 5 minute captures then freeze

Something I have found with Final Cut Pro 4.5 and Final Cut Express 3.0.
After Updating to Tiger - 10.4.11 and Quicktime 7.4.1 - Both Pro 4.5 and Express 3.0 will not capture more then 5 minutes and 12 seconds. If you are having this issue the solution I used to fix both Pro and Express issues was an update on the software. Final Cut Pro 5 fixed the problem (or 6 if you can) and with Final Cut Express, version 3.5 fixed the issue but if you can go with FCX 4.
Let me know if this helped or if you have found a different solution. Downgrading the os might help but that is too much of a pain and it's time to upgrade the software anyway.

#29: Need AGP Graphics card
Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
http://docs.info.apple.com/article.html?artnum=302667
The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
Shane

DVC PRO HD for final cut express

Hi,
I recently got some videos in the DVC PRO HD format that I need to edit in Final Cut Express. When I try to view them in Quicktime...the screen is black and I cannot import them into FCE.
I have no idea what to do? Any thoughts?
Thank you.

FCE does not work with the codec, FPRO can, if you can access it. Or, this free app can convert the clips to one that FCE can work with.
http://www.squared5.com/
Make sure the conversion matches the specs of one of the FCE Easy Setups. I'd suggest an AIC (Apple Intermediate Codec).
Al

Best hard drive performance on mac pro for final cut express

This week I'll be setting up a basic 4 core mac pro with 16 gb ram and 2 internal- 2tb WD Caviar Black drives. I'm wondering what would give me the best performance for running final cut express, and I'm considering setting up software raid 0 or using one drive for boot and one for scratch. Or should I set up software raid 0 with boot and scratch partitions? Or other suggestions? Thanks.

My recommendations -
With 2 drives in your Mac Pro, use *one disk for OS X and all of your apps;* the *second disk for data* (including your FCE scratch disk location). Partition each drive as a *single partition,* which will maximize performance over time.
In addition, you should invest in at least 1 external drive to use for backup purposes; if you don't, the day will come when you wish you had.
I strongly recommend AGAINST doing software RAID. Certainly not for your situation with only 2 drives, one of which will be your system HD; but also because hardware RAID is faster, more reliable, and does not require CPU resources to run.
Your internal SATA drives will provide plenty of performance for most video editing needs. You also have the ability to put 4 drives in your Mac Pro, in which case you can utilize the extra drives to provide additional performance if/when you get into serious multi-multi track video compositing.

Which camera to get for Final Cut Express 3.5HD/ upgrade to FCE 4?

Hello everyone!
I know this has been discussed frequently, but i am sort of looking for a costum made solution for me
Following situation: Macbook, 2.16Ghz, 2GB Ram, 320GB HDD @ 5400rpm.
I am running 10.5.3, have Final Cut Express 3.5 installed and am used to work in it,
mainly for editing video files not coming from a camcorder.
I have some experience in SD miniDV recording/editing though.
NOW I was thinking of getting a new camcorder in the 1500$ max range.
I want to edit video files, sometimes burn DVDs, at other times only to have them on the mac.
What i like about some of these new HD consumer models they can record AVCHD and mpeg2 SD in DVD quality. That should allow me to record in mpeg2 and have less hassle with importing/converting into Final Cut Express 3.5 if lower quality is fine (which it is as of now)
At the same time I could upgrade to Final Cut Express 4 and import the AVCHD files, but I still taken aback from how time and resource consuming it is. Plus it does not allow full HD 1920x1080 in FCE 4 does it?
So I was looking at the Sony HDR SR11 as a nice camcorder. Seen it live, seems decent.
On the other hand, is a camera which records in HDV a better solution for me?
I could keep Final Cut 3.5, no need to upgrade right?
Is it less hassle to transfer files to the mac and edit them?
I am very unsure which way to go right now...

Hi Flore
This a huge debate. There are very few advantages to the new AVCHD camera's and the vgery long list of negative aspects of AVCHD camera's outweighs any usefulness of them. They are designed for Grandad to pick up and shoot good quality pictures and not for editing.
I have posted below the wiki address for AVCHD, please read the page. It is very important you do read it. It explains in depth about AVCHD.
I feel the is no real place for the hard drive based AVCHD camera. There is a place for a mini-dv tape based camera.
Life will be very hard if you go the Hard-drive camera route. Stay with tape.
Tape is cheap, hardy and easy to move around. Hard drives not so!!!
Take some time to read the following wikipedia page...PLEASE READ THIS PAGE!!!
http://en.wikipedia.org/wiki/AVCHD
You will see that AVCHD is not all the bee's knee's.
I personally hope it dies an extremly painful agonising drawnout death.
AVCHD has no place in the professional domain.
Justin... Durban.. South Africa

Good substitute for Final Cut Express?

I tried a free month of Final Cut Express over a year ago. When done I found that the version I got If I bought was a newer version. I presume the two versions involved were 3.5 and 4.0. So I must have tried 3.5.
I liked it a lot! It would have been $200 as I recall. Now I find that It's no longer available. It had all the function I want and I cannot afford to pay for Final Cut Pro considering the relatively small amount of "work" I intend to do with it. I've since upgraded to Mountain Lion and it appears I cannot run Final Cut Express on this system. Plus, my iMac is mid 2010 with 4gb memory.
Is there some app out there that can do what FCE did?
One function in particular was very useful to me as a musician -- being able to stretch the audio from my Zoom recorder to match the audio/video from my camcorder.
Thanks for the help.

Hello David
Quick question which may be helpful for Bruce:
I'm familiar with the controversy over the original release of FCX. There was great disatisfaction and disappointment because the first release appeared to be more of a glorified iMovie. Many professional features were replaced with templates creating a 'dumbed down' platform, (nothing like FCP).
Many FC Pro users were outraged. Many abandoned FC, and went with Avid.
Is it true Apple admitted to a 'flawed design' with X, and put back a lot of Pro features that were missing?
Thanx
Mike

Serial code issues for Final Cut Express HD

My birthday present computer came with Final Cut Express HD pre-installed as a little bonus from my dad, but I can't actually use it until I know the serial code to register it. I've looked everywhere but I have found no information on the Apple website as to where one finds the serial code for a pre-installed program. I actually have this same issue with Soundtrack and LiveType, so if anyone has any idea about where to look, that would be wonderful... in the meantime I will keep searching. Thank you.

Even if the software comes pre-installed there should be disks with it. Are you sure it was pre-installed? I never knew Apple to do this in the US with pro apps products. They made bundles that came with computers, discount price if you buy a new computer, but never heard of them being pre-installed. Maybe your Dad has the boxes.

Last edit for "Final Cut Express: Basic Troubleshooting" tip

Hi again,
I'd like to propose a final edit to my previous tip [Final Cut Express: Basic Troubleshooting|http://discussions.apple.com/thread.jspa?threadID=2662419]. This edit adds post anchor points to allow for easy linking in the future.
The final version will be submitted in the post below.
Thanks for your help!
- Sasha
Edit: Example link = [Trash your preferences|http://discussions.apple.com/message.jspa?messageID=12689228#TrashP refs]

Final Cut Express: Basic Troubleshooting
There are many problems that can occur in any version of Final Cut Express and each one is generally best treated with a solution specifically tailored to it. However, you will generally get the best results if you follow a simple step-by-step approach to troubleshooting outlined here.
1. Quit the application.
2. Is your computer supported by the version of FCE you are running?
Final Cut is particularly susceptible to problems when being used in conjunction with hardware, operating systems, and versions of Quicktime other than those that are supported. Always check before updating to see if the version you are running will continue to be supported. You can view the hardware requirements for FCE4 [here|http://www.apple.com/finalcutexpress/specs.html]. Note that FCE4 is the only version of the program supported by Snow Leopard. It is generally a good idea when working with Pro Apps to do a complete erase and install when updating to a new OS and then reinstall the program afterwards. Never update any critical software such as Quicktime or your OS when you are in the middle of an important project. Always keep a backup in case something goes wrong when you do.
3. Is your software fully updated to the current version?
In the upper menu bar, select the  symbol and click +Software Update+ in the contextual menu that appears. Make sure to download any Final Cut Express, Quicktime (if supported by the version of FCE you are running) , ProKit, and other important updates that the system recommends. Updated versions provide critical bug fixes and improvements that may solve the problem you were experiencing.
4. Are you using supported external hardware?
FCE can capture using FireWire from camcorders recording in DV-NTSC, DV-PAL, or HDV and can ingest using USB from AVCHD camcorders. Make sure that your recording device is compliant with one of these formats and not some related variant (such as AVCHD Lite). External USB drives are not supported by Apple for video editing - if you are experiencing problems while using one try disconnecting it and see if the issue persists.
5. Trash your preference files and repair disk permissions.
Whenever you have trouble in Final Cut Express it is almost always a good idea start by trashing your preference files. These can easily get corrupted and many problems can be quickly fixed by giving them a dump. The Apple Knowledge Base article found [here|http://support.apple.com/kb/TS2611] outlines how to do this - [Tom Wolsky|http://discussions.apple.com/profile.jspa?userID=342090] also describes a good method [here|http://fcpbook.com/Misc1.html]. It is also a good idea to repair any permissions issues that may have arisen, and you can find a good description of the process [here|http://support.apple.com/kb/HT2963?viewlocale=en_US].
6. Search the discussion forums for solutions to similar problems.
You may be experiencing a common problem with the application or one that has been addressed when brought up by other users. Enter your query in the search bar on Apple Discussions and narrow your question to the [FCE forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] to get the most accurate results. Unless something very strange is going on it’s likely that you will find an answer or proposed solution has already been posted.
7. Start a new topic.
If you are unable to find an already posted solution on the forum that works for you and trashing your preference files has not fixed your problem, post a new topic in the FCE forum describing what is going on. Be as descriptive as possible and make sure to include pertinent information such as the specifications of your computer, OS, Quicktime version, the sequence you are editing in within the program, and the clip you are placing in it if this relates to the problem you are experiencing. Refer to [Eric W.|http://discussions.apple.com/profile.jspa?userID=337386]’s announcement [How to Post a new Topic|http://discussions.apple.com/ann.jspa?annID=650] for more information.
8. Perform a complete removal of the application and reinstall.
If you are not receiving working answers to your problem or it appears that your dilemma has not been reproduced in the past, try reinstalling FCE. You should first completely remove all traces of the program. Digital Rebellion has a nice free application called [FCS Remover|http://www.digitalrebellion.com/fcs_remover.htm] which automatically does this - alternatively you can manually do it by moving all components listed [here|http://support.apple.com/kb/TA47818?viewlocale=en_US] to the trash and emptying it. Note that the files listed may be named something slightly different if you are using a different version of Final Cut.
9. Contact Apple.
If all else fails, you should go ahead and contact Apple. It’s possible that you received a faulty disc or that they will have a solution to the problem that no one else has thought of. You can find pertinent contact information [here|http://www.apple.com/contact>.

Seperate Video Monitor for Final Cut Express HD 3.5

Hey guys. I was just wondering if it was possible for me to connect my iMac Intel to a seperate video monitor. The thing is--I know you could possibly connect a dvi to composite or s-video adapter and walla...have a mirror of your desktop right there on your sony trinitron. But here's the thing. I want JUST the Viewer from Final Cut Express to be playing through it. Basically...I want my tv to be my viewer. Back when I was in school learning this stuff I remember all the setups I used had a little broadcast quality monitor connected, and ONLY the viewer window would be playing through it. Now I didn't use Final Cut then. I used something called Media 100. But the computers we used were like at least 10 year old powermacs. I dunno. I just have always wanted to copy that setup with my own computer. It was soo much nicer to edit on. I figured after this many years the newer macs would allow that sort of setup to be had a lot easier. Thanks for your time you guys.
Branden

It goes this way: Firewire out>camera (aka A/DV coverter)>S-VHS (or composite) to NTSC monitor. The audio goes line out from the A/DV converter to speakers.
Hook everything up when the computer is off.
Turn on the camera, monitor and speakers
Turn on the computer
Launch final cut
it the image does not automatically show up on the external monitor
go to View>Refresh A/V Devices
then
Set View>Video Playback>Apple Firewire
Set View>External Video>All frames
Set View>Audio Playback>Audio follows video
all should be happy. there is probably a big section in your user manual about this stuff.
good luck.
x

Importing Video Files from DVD and the net onto final cut express 4

2 questions:
1st: Ive imported a video file downloaded from the net to practice editing, but once I have done that, the video file has no audio? how do I get the audio for those files?
2nd: I had ripped some video files from my university film project onto my laptop, but I cant Import the files into final cut express to further edit it (because it was a group project), because its the wrong format and stuff. How do I fix this and allow it to be imported?
Any help is greatly appreciated
Cheers

ohk cool, wat about my first problem with the sound not being imported?
Most likely the file is multiplexed. That means the audio and video are rolled into one. Same thing applies as the other post, the file needs to be in a format that FCE recognizes. Streamclip may do it, depending on the type of file of course.
Al

Serial Number for Final Cut Express 3.5 upgrade is lost in melt down

After a major melt down of logic board, internal and external hard drives I am trying to reload programs. I have loaded final cut express 3.0 and when I try to load my 3.5 upgrade it asks for a serial number. Even though I have the packaging it came in I can not find the number. I registered the software and would like to know if there is a location with Apple I can find the software I have registered and get the serial number from that. Or any other way to find it.

Apple customer service was very good and had the serial number within 2 days. Thank you for the suggestion.

Transfer vision from DVC PRO 50 to XDCAM for Final Cut Express

Similar Messages

Maybe you are looking for