Transfered audio cd, put tracks are placed in songs section, not audiobook

My ipod has been placing all of the audio tracks i have into the songs section instead of placing them in the audiobook section. Also, when i just want to listen to a specific audiobook, all of the chapters are out of order. Why is this happening and what can i do to fix this?

Now that we've established that you have the CD correctly imported into iTunes, we can move on from there.
Connect the iPod to iTunes. When it shows up as a Device (in the left window of iTunes) select it. You will be looking at the Summary tab (or pane).
On this pane, my choice is to have the option to Sync only ticked songs and videos selected. I recommend this option for you. This is relevant to the next step.
At the top of the pane select Music. On this pane, check the options for Syncing. You need to have Sync Music selected and then choose either Selected Playlists (which will only put your choice of Playlists onto your iPod) or Entire Music Library. If you select "Entire Music Library" then all your songs (one exception) will be transferred to your iPod.
The exception is: if you un-tick a song in your iTunes Library, then at the next Sync, it will be removed from the iPod but kept in your Library.
Any luck?

Similar Messages

  • My Audio And Software Tracks are quiter when Record Enabled with Plugins on

    When my tracks are armed to record the volume seems much quieter...Then after I record the take and playback its full volume;;; I think its a preference I accidently set??...Example..
    If I have a piano software plug on, its quiter during recording then playback..But even during playback, if that track is highlighted on Arrange its quite,,,I have to un highlight the track...Even when recording audio if Im perhaps using channel strip settings??...Ideas>>>????? Anyone??/

    Bee Jay wrote:
    I do tend to assume a certain level of experience some times...
    I think everybody tends to do that - including the questioners. So don't be too hard on yourself...

  • Why are photos that are placed on the page not showing up in links panel?

    seems really random, I have 2 files that have several photos on them, but one photo on each is not showing in the links panel

    not sure, just checking on errors from other co-workers, but I tried copying and
    pasting from Quark and got the same result, so that is probably what they did.
    thanks

  • On itunes everytime I try and play a track the warning 'the song could not be played because the original files could not be found' please can anyone help me? Thanks

    Hi. I have been having problems with my PC and recently removed a lot of rubbish to clear it somewhat. I dont know if that is relavant however on top of that I have just received my replacement iPad2 which i had a proble with and  thought I would just tidy up my tunes before  sycing.  The problem is that everytime I click to play a track in iTunes on my PC, whilst the track is showing on my itunes, it comes up with a warning 'the song cannot be used because the original file could not be found. Would you like to find it'. I have tried clicking 'locate', but all that appears is 'music Library' 4 different dates. Help i am very confused, can any shed any light on this
    Thank you

    Sounds like you have somehow moved your itunes music library to a different location to where iTunes thinks they should be. Your music should be in a folder called "iTunes Media>Music". If they are located there, try going into iTunes, right clicking on one of the songs and then "get info". When the box pops up, on the first screen it should give a location line where it thinks the music is located. If it is differen't to where you music is stored, try and match it up to the location line that was in the "get info" box.

  • Podcasts are stuck in "song" section....

    I noticed all of a sudden I was losing space on my 2gb nano. I have had the same songs on for years, but I am a daily podcast listener. I could get 7 or 8 half hour long podcasts. Now I have no room left at all, but it is showing no podcasts. So I shuffled through my "songs" and found a bunch of podcasts (played podcasts, not unplayed). When plugged into PC with itunes, click on ipod>music, those podcasts are not visible. So, I cannot access them to delete them manually. Any ideas? I do not want to restore, because I have music from my old PC that crashed that I no longer have access to.

    There are programs out there that can rip music from your iPod. Maybe if you get one of those you can get the music off to do a restore. It sounds like that is what it needs.

  • I'm loathed to ask the same question again about the ITunes library not syncing with my iPod but having just done a complete restore, ensuring the tracks are in AAC format.. There are still problems.. Apple are there with the tutorials..but no solvings!!!

    I'm using iPod 4th Gen iOS 6.1.3 and an iMac with 11.3 .. All latest versions. I have 23.4gb music according to the file but when I attached the iPod the bar at the foot of the page says 18.3gb. Some tracks are missing. Most if not all have been ripped from cd's into iTunes which is creating AAC format for each track. Other tracks play fine, some show the song but not the Artist and vice versa.
    I have tried dragging the tracks from the Mac library to the IPod music file..nothing. So I go to Safari, type the question in and read the same problems over.. Are Apple aware of their Tutorials without troubleshooting pages ?    Do they care? 
    My Pioneer DDJ/T1 is set up with Traktor and only wants to work with iTunes..  So iTunes are edging themselves in everywhere for everything... But it's still not working as it should..
    Anyone have any clues please... Tried most all the ideas so far...

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • How can I put all of my songs under artist. Some are only under songs?

    Some of my songs are listed under songs and not by artist.  How can I put them all under the artist category?

    Thank you, thank you THANK YOU Roger! You truly made my week! I would have never found thgat without you. Again, thanks a million!

  • Video & Audio Tracks are not connected

    For some reason my video and audio tracks are no longer conneted. It used to be when I would click on the video track that the 2 audio tracks that match it would also be highlighted so I could move them together, trim them together, etc. but for some reason now all my video clips that I put on the timeline are seperate (1 video and 2 audio) so I have to highlight all 3 lines to have them stay together, and it will not let me trim or apply transitions to all 3 at the same time. Is there a setting for this?

    Make sure the "Link" button is on-- it's the small chain at the top right of the timeline, next to snapping. Once turned on, though, your clips already on the timeline may still lack cohesion; if so, select a video clip and the audio clip(s) that you want to link, and go Modify>Link.

  • Audio Tracks Are Destructive?

    I'm quite new to Premiere, but not so very new to NLEs. The biggest hurdle I'm having with my switch to Premiere is that when I drop a new video+audio file on the timeline, or if I drag an already existing file around on the timeline, and that file's audio track should land on top of any other file's audio clip, the audio clip that was there is suddenly truncated. I would expect that the audio clips would just be stacked on top of one another, but it appears that any audio clip that gets all or partially "hidden" by another track is actually destroyed.
    I've tried dragging the audio clip back out to be the same length as its associated video clip, but no matter what I do, the audio clip always remains shorter than its associated video clip.
    Is there some command to "restore this video track's audio?" A command that would either bring it back if it got totally destroyed, or allow me to "stretch" the audio clip back to the same length as its video track?
    I hope that makes sense to someone...
    Thanks,
    -joe

    I would expect that the audio clips would just be stacked on top of one another
    Not automatically (and rightly so).  You have to 'stack' them manually, placing the second clip on Audio 2, or 3, or whatever.
    the audio clip always remains shorter than its associated video clip.
    Hold down the ALT key when you drag the audio portion.
    These are both pretty basic items available in the Help file.  I suggest a thorough read before actually using the software.  You'll become much more proficient and have far fewer issues.

  • Audio Tracks are silent after Narration PE12

    Audio Tracks are silent after Narration. Mixer is at 0.0dB on all channels. Audio plays fine when double clicked but is silent when played back on timeline. Narration is fine. Any ideas as to what's happening and how to correct this?

    c.s.radiation
    What you described is a known issue with Premiere Elements 12/12.1. I have not been able to reproduce the problem which has been encountered by
    several. But....
    Please read about the fix offered by Llamadude99. That specific fix as well as modifications of it have resolved this problem for several.
    http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html
    After reading the above link content, determine if it works for you, and then let us know the outcome.
    Thank you.
    ATR

  • HT2375 Using logic 9: play back of all project files now has problems:  Track volumes are way off - if panning is set to center then you cant hear that track? Even if pan is adjusted tracks are low and or distorted I have looked at core/built in audio

    Been having project play back problems for about a month.  Sometimes when I open a project the volume of certain tracks is low and or distorted.  Oddly if a midi track is panned to the center (0) its volume is too low and if I pan right or left the track becomes louder.  Sometimes this doesn't help and if it is an audio track things become distorted. 
    Although things have been working good for about a year now I think it has something to do with the fact that I have to take the laptop to work and use headphones/built in audio for play back and then take it home and use different audio interface but I can't be sure.  The settings in preferences/audio/devises seem to be correct.
    I have not added any plug-ins recently.  I have not downloaded any new programs recently other than a NI tutorial video (shouldn't have any affect) but I am trying to use a new midi controller but again that shouldn't have any affect on play back of existing track?
    Any suggestions?

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Audio Tracks are not linked when imported

    I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
    Adam

    There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

  • Audio tracks are not nesting

    So all of a sudden, when I select the audio and video clips and right click > Nest....only the video tracks are being replaced by the nested sequence on the timeline while the audio clips stay intact on the timeline.  When I look at the nested sequence all the audio clips have been copied there. 

    Ok, I'm officially upgrading this bug. Now, in Adobe Premiere Pro CC 2014, when I use the "Nest" command I get the same behavior as mentioned above. Except now when I drag the nest into a time line, it acts like the nest is not there and instead drags all the tracks in (6 tracks). Even if I try to drag a sequence into another sequence, it instead drags it in not as a nest, which is something I definitely do every day in CS6, but instead as all the separate tracks.
    At this point, I'm starting to feel a bit like a beta tester on an unreleased product. Just a few more of these bugs and I'm going to have to go back to "last years model" CC until an update for 2014 is released.

  • 2 audio downloads have funny sounding audio, As if the tracks are running through a fan? Any help?

    i have 2 audio downloads (entire albums!) that have funny sounding audio,
    As if the tracks are running through a fan? Any help?
    it hought it was my car speakers, but it sounds that way on every thing!
    help?
    thanks!

    Not that is not the cause. I would contact iTunes. Tell them what you did and the results.
    Refunds from the App Store or iTunes - Apple Club

  • I don't load music, only audio books.  When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2  are named 1a, 1b, etc.) , so  when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

    I don't load music, only audio books.  When I have a book that is more than 1 disk, the tracks are named different, (eg track 01 etc., on disk 1, then disk 2  are named 1a, 1b, etc.) , so  when synced it is all jumbled 01, 1a, 02, 2a ect. Help?

    See this page from another forum member turingtest2. He might even chime in here if he sees it to offer any additional advice.
    Audiobooks on iPods
    B-rock

Maybe you are looking for