Transfering pictures from memory card to computer

I have a new HP Photosmart 7529e all in one. I put my memory card in the slot but the printer screen does not show my computer as a destination. I'm using Windows 7. Nothing at the computer end acknowlages that the card is in the printer slot. How do I transfer pictures from the card to the computer?

Thank you for clarifying Stainless909,
In order to access the network card through the wireless network, you will need to map a networf folder to access the printer.
Follow these steps to map a network path:
From the printer front anel go to Setup, then open the Wireless menu.
Select Display Network Configuration , then go to Display Network Summary and write a not of the printer IP address.
Open the Computer window by choosing Start → Computer.
Click the Map Network Drive button on the toolbar to open the Map Network Drive dialog box.
Type the printer's IP address with 2 trailing back slashes in front (e.g. \\10.0.0.1), then click on Browse and select the Memory Card folder.
Click OK to confirm, ensure that Reconnect at Logon is checked and click on Finish.
From now on you will have a drive to access the memory card ready under Computer.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Transfering pictures from memory card to computer

Re: Transfering pictures from memory card to computer
Options
‎12-08-2014 05:04 PM
Here’s my question,
I have a new HP Photosmart 7520e all in one. I put my memory card in the slot but the printer screen does not show my computer as a destination option. I'm using Windows 7. Nothing at the computer end acknowledges that the card is in the printer slot. The computer is wireless hook up. How do I transfer pictures from the card to the computer?
Thanks support team. My old HP Printer pooped out on me and I just got this new one hooked up. I have a card full of pictures I need to move into “My Pictures” but so far, my new HP doesn’t want me to. Stainless909

My computer does NOT have a card slot or I would have use it to start with. Next: This sentence doesn't make any sense to me. (youyr answer) "You can map the card to network drive but why you have to do that hard ?" I don't understand "maping net works".
All my previous (4) HP printers had card slots (as this one does) but when I put my card in the computer would read it and ask me if I was ready to import them and I picked the destination ... click on "import" and it happened. This one.. nothing happens on the computer but the printer screen gives me a choice of destinations (snapfish & usb cord) but does not offer an option of moving them to the computer. Are you not understanding my problem???? Would this be better resolved with a phone call? 951 769-8420 Thanks Bruce aka... Stainless909

ImageBrowser EX unable to download pictures from memory card

I'd been able to download pictures and videos from ImageBrowser up until now. It didn't open when I connect the camera (ELPH) and when I manually open the software to import the images, it said "No images to download to the memory card". Can anyone help me solve this please?

Hi cherrycow!
Welcome to the Canon Community and thank you for your post!
So that the Community can help you better, we will need to know exactly which PowerShot ELPH you're using, if you're seeing any error messages, and the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac OS X 10.x), as well as the way you connect to your PowerShot (USB or WiFi).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone during the week or email anytime!
Thanks and have a great day!

How to upload photos from memory card to computer on new Officejet 8500A Plus?

I recently replaced an older HP psc 2410 photosmart printer with a new Officejet Pro 8500A Plus printer. The installation went fine without error messages, and it prints, scans and copies just fine. When I insert a memory card into the slot, the printer itself recognizes the files and displays them on the LCD screen and offers to print them. BUT ... what I want to do is upload the files to my PC (running Windows XP), and I can't figure out how to do it! There is no HP program that pops up and offers to transfer the photos like with my old printer. I was also expecting to see the card slots shown as a removeable drive like I did with my old printer, but I don't see them. Also, my Photoshop Elements program doesn't recognize the card slots either.
Then it dawned on me that my computer doesn't "see" the card slots because it's not connected directly to the printer! I set this up as a wireless printer and I am totally new to this, so pardon if this is a dumb question... but is there no way to transfer files from the card slot to the PC in a wireless setup?? I'm totally confused...
This question was solved.
View Solution.

Hi,
If your printer is connected thru network or wireless network, you have to access it thru the IP address.
Find out the IP address of the printer. You can do this by clicking on the network icon on the front panel of your printer.
Open Windows explorer and type \\xxx.xxx.xxx.xxx" where xxx.xxx.xxx.xxx is the ip address of the printer.
You'll see the memory card slot there.
You can do a "map network drive" to it if you want your printer card slot to be listed there permanently.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Toshiba Gigaframe Q80 - no pictures from memory card

Hi all,
my Gigaframe Q80 doesn't recognize a Memory Stick Pro (Sandisk Ultra II 1GB) and doesn't load any pictures. Nearly the same problem with a Sandisk micro SD (6 GB) which is in a SD adapter. The frame recognizes the card but doesn't load the pictures and the menu entry "copy pictures to memory" is inactive.
Is there anything else I did forget? The pictures are in the root directory of the memory card. Any memory cards that work?
Thank you for any hint
Best regards
Frank

Hi
On this Toshiba page http://www.toshiba-multimedia.com/ you can find some info regarding this Gigaframe Q80.
It seems that the Gigaframe Q80 supports only jpeg and bmp as picture standard.
Furthermore the frames memory card slot seems to support -SD, SDHC, MMC, MS, MS Pro, xD cards.
Did you test other cards? If not check it!

I cannot find my pictures in iphoto after downloading and delating from memory card....

I downloaded my pictures from memory card, and once it was done, iphoto asked me if I wanted to keep the pictures into the memory cart, I pressed no, and now I cannot find my pictures anywhere... Is there a way to find them back ?

Hard to say
Are they in last import?
do not use your memory card until you resolve this - you may want to use software like Media Recover to recover the images on the card
You can try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
For the future a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
LN

Problem transferring pictures from camera memory card to computer.

Problem transferring pictures from my camera memory card to my computer. When asked where to save them, it only gives me the option of saving to "Snapfish". There is no option to save the pictures to my computer???

I have a new HP Photosmart 7529e all in one. I put my memory card in the slot but the printer screen does not show my computer as a destination. I'm using Windows 7. Nothing at the computer end acknowlages that the card is in the printer slot. How do I transfer pictures from the card to the computer?

Delete from memory card after import

Hi,
I'm a fresh Lightroom newbie, and I am missing how to delete pictures from a memory card as I am importing them into Lightroom. This seems a glaringly obvious feature, so it must be hiding somewhere.
The only options I can see in the "Import Photos" dialog are
- Copy photos to a new location and import
- Copy photos as Digital Negative (DNG) and import
There doesn't seem to be an option to delete files after import, just various ways to eject the card.
I've found one way if I choose "Import Photos from Disk" while in Lightroom, there I have a Move option, but why not from device? Every other photo importer has this.
Thanks,
Zak

Thanks for your responses. I'll go ahead and use "Import photos from disk" and change to my card reader. I personally had no problems in my years reading & immediately deleting files from memory cards. I had a few instances where I inadvertently deleted a fresh imported picture on the computer, I used undelete utilities on the card in these cases.
That said, I still think it would be a good feature. If the users want to do it (2 years of questions), just let them.

Transferring images from memory card in printer to iMac.

My camera just broke, and I am unable to download the pictures from my camera's memory card onto my Mac (I am using version 10.6.8). I usually just plug my camera into my Mac via the USB port, but I am now unable to do that. My printer has a memory card slot to use to print from, but I'm not sure I can transfer pictures from my card to my computer. I have a Canon MP560 multi-function printer. I just came back from a 2 week vacation and would like to see my pictures! Please help!

Glad that worked for you!!!
bethcrna wrote:
Thanks, everybody! It's all good. I had my printer set up wirelessly and it didn't work, but as soon as I plugged the USB port into my Mac instead of the wireless router, iPhoto came right up. Whew! Now I can see and edit my pictures. Thanks again.

Confusion re: photostream, import from memory card, events, etc.

confusion re: photostream, import from memory card, events, etc.
Up until a few weeks ago, my travel-photo-handling went like this:
Each night, I download photos to my iPad for safekeeping. They, of course, wind up in Photostream.
When I return home, I connect my camera card to my iMac (where I have my iPhoto library), and I can "see" the photos on my memory card - the photos which, although in Photostream, I have not yet manually downloaded.
I select and ownload them.
New Events are created in my Library automatically, as I have my preference set to Autosplit Events.
This week, I came home from a trip during which I had downloaded to iPad during my time away.
I connected my memory card to the iMac.
iPhoto did not "see" any photos to import - as far as iPhoto was concerned, those photos were already in my Library.
I had iPhoto show all photos on my card, selected the photos from my trip (I shot over 1000) and clicked "Import Selected"
iPhoto says they're duplicates.
However, the photos have NOT been downloaded manually and there are NO Events in my Library for those days.
Note: yeah, they're in Photostream, but IN THE PAST - and I mean literally up until 3 weeks ago - the photos have ALWAYS been "visible" and importable even if in Photostream, as long as I had not yet manually downloaded to the computer.
So my question, I guess, is multi-part:
What changed in iPhoto and/or Photostream in the past couple of weeks?
Why are Photostream photos suddenly considered to be the same as the photos on my card which have not yet been manually downloaded to the computer?
What the heck is going on?
I hate having duplicates, but I also hate being confused by something that used to be really easy, then - with Photosream - became annoying, and is now simply perplexing and sometimes imcomprehendable.

Check iPhoto's Photo Stream preference pane to see if the highlighted checkbox in the screenshot below is checked. If it is then all photos taken by the iPad are automatifdally being imported into your library.
Go the the Events mode and check the View ➙ Sort menu option to verify where new Evens will be located, at the top of the window or the bottom. Then check to see if your PS pictures are there.
As a test launch iPhoto with the Option key held down and create a new, test library. Connect your iPad and import all photos. Dismount the iPad, close and reopen the test library, connect the iPad again and test to see if the same problem persists. Does it?
If it does'nt then your current library is damaged and needs to be repaired.
OT

Photos did not download and I deleted them from memory card. how to recover?

Photos did not download to computer. I deleted them from memory card. Is there a way to retrieve them from memory card.

If all you did was delete them it should be relatively easy to recover them BUT don't use the card until you've done it. Even after a format it's fairly easy but not after re use because you write over them. For more help read the replies here.
http://forums.usa.canon.com/t5/PowerShot/How-do-I-recover-photos-deleted-from-the-memory-card/m-p/84...
You will need a card reader because I don't think it can be done in camera using the usb cable.
"A skill is developed through constant practice with a passion to improve, not bought."

Just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

Perhaps the type of file on the camera card is not supported by elements 9 (I have elements 12 and all of my pictures are jpegs so I wouldn't know). You might have to save the pictures you want to your computer as jpegs.

I was uploading photos to iPhoto from memory card and the program froze

I was uploading photos to iPhoto from memory card and the program froze.
I can't get rid of it and it won't respond to anything.
Even restarted computer and it's still there.
I can continue using computer for other things, but can't get out of iPhoto.
Version 9.3
iPhoto 11
Thank you for any help.
Herb Jones
TheOnlyOblong

WOW.................we do learn something everyday.........
Thank you very much Terence
Herb Jones

Import as DNG from Memory card to PC using Win 7?

I import images into My Pictures (Win 7) then convert to DNG when I import into them into Lightroom where I delete and edit. The DNGs are deleted from Lightroom, but CR2 files now on my hard drive are not. Can I import as DNG from memory card to hard drive on PC so they will be deleted as well? Thanks

AFAIK Win 7 does not have any features to Copy/Convert to DNG from your Memory Card to your hard drive.
The import function in Lightroom certainly has this ability within the import dialog menu. Just select the appropriate settings.
This is done from the Library Module in Lightroom.

X2 how to copy files from memory card to phone?

I would like to copy a picture and a song from memory card to phone memory of my Nokia x2, but I don't know how to. If I take out memory card from the phone now the picture I chose as my screen background disapears I want to have it all the time on the screen no mater if the card is in or out of the phone.
I will be greatefull for advise

I do not have the cable to conect phone with my laptop I just bought this Nokia x2
and I dont know why but my bluetoth laptop conection isn't cooperating with the phone.
Is there a different way to copy these filesfrom memory card to memory of the phone?
On my old SamsungSGH 250E it was very easy to do?
How come a newer phone is so compicated?

Transferin​g pictures from memory card to computer

Similar Messages

Maybe you are looking for

Transfering pictures from memory card to computer