Transfering 0CUSTOMER from R/3 and activating in Business Content

Hi all,
New to BW. Trying to learn Data Transfer. Need help activating infoobject 0CUSTOMER in Business Content. I transferred 0CUSTOMER from R/3 without any problem. When i try to activate it in Business Content I get the following errors:
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
Any suggestions would be greatly appreciated.
Thanks,
Prabhu.

Prabhu,
The error messages you got are for those InfoObjects that are already activated, and whose active version is different from the business content version. When you are installing 0CUSTOMER, you need to be very careful as to NOT INSTALL those objects that are already active, unless you specifically want to.
in the BC scrren, Right click on the 0CUSTOMER, and select "remove optional objects". Then the system will not select the active objects for installation again. Even after you do this, expand 0CUSTOMER tree to the lowest level and see what objects are prompted for installation. And remove the check marks for those objects which are alrady active
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
0CITY has been modified and the flag "attribute only" has been removed from it. You are trying to install it again, which puts the flag back. But, since it is being used as a NAV attibute, you can not do that. hence the eror.
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
Same reason as above. When you mark something as 'attribute only' it can't be used in InfoCubes or ODS objects.
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
0CURTYPE in active version is different from the business content version. You are trying to change that again.
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
same reason as above.
Good Luck
Gova

Similar Messages

HT1554 Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Hello,
See if this helps...
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

HT4527 How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

How can move the apps and playlists on my iPad to my Mac? Whenever I attempt to sync, I get a message stating that all apps and music on my iPad will be replaced by content from my Mac and there are no content. Thanks.

the apps will not be deleted if the itunes is authorised for the apple id from which you downloaded the apps.
for the songs if you have downloaded it from a store other than itunes an app "TuneAid" will help you. download the full version then you can copy all the songs on the ipad to ur itunes library

Error in Activating the Business Content Infocube 0CRM_C08

Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUN

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error during activation of business content

Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!

Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance!

Question on activation of Business content.

Hi friends,
Our client is implementing BW , and we are in the process of activation of business content, I already some content activated already , for Porcurement, right not I see , in Administrator work bench > Infoprovider TAB>0MMPUR_IO and all the master data objects under neath it and the same under Infosources tab also , so what is the grouping they might have follwed in installing and with what activation they must have started with ( IO, Infoarea, Insource..data targets ..)?
Once we know what they have followed with , we want to continue the same for others .
thank you.

You can still activate content with grouping as required but in the process just make sure you set/flag the Match(x)or Copy and Installation will not impact/overwrite already activated objects.

Transferring files from original imac AND external CD for old imac

I have an original iMac that has tons of files on it I would like to save. I created a LOT of materials when I was teaching and they are all on the old iMac. It also has two games I bought on floppy discs that I would really like to keep. I tried to load files on a Passport, but the iMac won't recognize it. I have two other old iMacs (not quite originals) as well, but they won't take the Passport either. They will both take a flash drive. I can take word processing files (I can't even remember the application at the moment) off the older one and convert them to Apple Works on the other one, then take the converted files to our iMac 9.1 and convert them to Pages. Then I put them on the Passport. It is a pain, but at least it works. I can also save the documents as pdfs and put them directly on the newer iMac and copy and paste in a Pages document.
The original iMac does not lend itself to any of this. What is the best way to transfer files? It seems like a very long time ago I tried to connect it to my newer iMac with an Ethernet cable but it wouldn't accept the cable. If I am remembering correctly I called Apple Support and they said it lacked something that would allow it to connect. I do not remember if I have tried a flash drive on it or not. I believe I did and it would not recognize it.
Also, does anyone know how I can manage to save a copy of the games? Since I bought them on floppies I can't reinstall them if something happens, but I believe it is within the law to make a backup copy. Someone please correct me if I am wrong. I do have an external floppy reader for the original iMac, but it only works on user created floppies, not commercial ones. If I can manage to hook up to a flash drive or another computer and I simply save the game application, will that be enough? Or is it not possible to know until I try? Will saving the application get all the necessary files?
My second question concerns the newer (but still really old) iMacs. My daughter would love to play some of the games she used to play on them, but the CD drives do not work. Does anyone know where I can get an external CD drive that we can attach to these old iMacs so she can enjoy her games? The computers work fine; she just can't insert the CDs, because it's next to impossible to get them out again.
I believe on the "newer" two we are running OS 9, at least on one of them. I do not recall the OS on the original, but it is whatever it came with. OS 8, perhaps? It has been probably half a year since we fired it up.
I appreciate any advice and help anyone can give me. We really like these old iMacs, which is why we still have three of them. If we can save the files off the original iMac, we would still keep it so we could play our two old games from time to time. :-) I would part with one of the other old iMacs, but I really need to get the files first, and since it won't take a Passport I'm wondering if I'm stuck putting files a few at a time on a flash drive. Do you think it would take an ethernet cable? It seems like I tried to connect to my newer iMac but I couldn't get the computers to recognize each other. I followed all the steps for sharing, but I still couldn't get it to work.
Thank you so much.

Have you formatted the Western Digital Passport drive as a Mac OS Extended (HFS+) volume, or is it factory-formatted for PCs? If the oldest iMac is only running OS 8, it can't recognize HFS+ volumes. It was OS 8.1 that introduced that feature. Additionally, the version of the USB support files (which is somewhat OS-dependent) on the iMacs hard drives affects what will or will not be recognized by those older computers. With each successive release of the USB Adapter Support, the database of supported devices was broadened. The easiest way to transfer the contents of the iMac's hard drive is to physically remove it from the computer and connect a USB-to-IDE adapter directly to it. These adapters come with an external power supply to provide the 12 & 5 volts needed to power the drive. The data connection block is designed to fit either a 3.5" hard drive or the smaller 2.5" laptop drive, as well as newer drives that connect via SATA. It has an included USB cable that connects to a standard USB port, enabling direct reading/writing/file transfers from the hard drive to the computer to which it's connected. These adapters are not Mac-specific in terms of design, so you can buy one at a PC store and use it. For the purpose of identifying such an adapter, here's one that's often recommended in these Forums, carried by Other World Computing. As I mentioned, this adapter is not platform-specific, so you can buy/use a less expensive one sold by PCs stores. I bought one for $15 from Micro Center (PC store), and it has worked with Macs and PCs. As for removing the hard drive from the old iMac - and I assume that it's one of the original models with a tray-loading optical drive (as opposed to the slightly newer ones that have a slot-loading optical drive), you can find directions for accomplishing that if you do a web search. The link that I had for one site (that was good for years) is no longer valid. The iMacs that have a problem ejecting disks are undoubtedly slot-loading models. There are two wide rubber rollers inside those optical drives that grip the disk to pull it in or feed it out. Over time, the rubber dries out, causing the rollers to lose their natural gripping capabilities. If those iMacs have a FireWire port on the side, I'd suggest an external FireWire optical drive. Today, the only type you'll find is a DVD±RW drive, which is more than you need for your intended purpose. A basic CD-ROM drive isn't manufactured/sold anymore. Other World Computing has a few FireWire optical drives, but their least expensive model sells for about $100. Obviously, that costs more than the value of the entire iMac at this point, but the drive will also have USB connectivity as well. You may find other uses for it with your other computers (Macs & PCs), especially if they don't have a CD-R, CD-RW, DVD-ROM, or DVD±RW drive. As for transferring a program itself, there could be other associated files. You'd want to check the Extensions and Control Panels folders for any that are named to likely indicate being a part of the program's installed files. The Preferences folder will probably have a file that has saved game settings, but a new one would be created when you run the program in another supported computer. Depending on the age of the program - and you indicated that it was on floppy disks - its compatibility with newer, pre-OS X releases might be limited. The external USB floppy drive that you use with the older iMac should read commercial floppy disks, but it will not recognize the older 800K (Double-Density) Mac-formatted floppy disks. They're disks that typically format as 720K floppies in a PC, but the variable-speed FDD in older Power Macs was able to fit an extra 80K of data onto those disks. A standard 720K "PC" floppy disk should be read by that drive, but it can't recognize an 800K "Mac" disk. A 720K/800K Double-Density floppy disk only has the slide-lock hole at one corner, while a High-Density (1.44 MB) floppy disk has an additional hole at the opposite corner to differentiate it from the older type.

How to get activity description from network number and activity numbet

Hiiii....
I have the activity number and network number obtained from AFPO table which is order detail (Network Detail) table. Now i need to get the actvity dexcription... Kindly help me to get that..
Thanking you,

Hi,
the short text of the activity is stored in table AFVC. The key of this table AUFPL and APLZL i. e. the internal network number and activity number. The external position number is field VORNR.
Kind regards
Peter

Transfering data from older machine and upgrading to Leopard

Like an idiot I bought two new iMacs just a week before Leopard was announced. So I am getting the $9.95 up-to-date offer on Leopard.
My question is a matter of sequence. Does it make any difference if I fire up the new machines and transfer all my data from the older (G5) iMac first, then upgrade to Leopard when it arrives? Or should I wait and do the upgrade first, then transfer everything?

Welcome to Apple Discussions!
You are probably going to get all kinds of opinions on this, and I don't know how the $9.95 upgrade works. I got my MBP about a month or so before Leopard came out because my iBook died and I needed a replacement. I decided to put very little on the MBP until I was able to install Leopard. Just as well. I tried an Archive and Install, and it was immediately apparent that there were some differences--the mailbox fonts were different and the internet access settings kept changing so I had to keep resetting them to get on line. I tried loading 36 photos from a CD and got multiple copies and some other junk. After deleting all the extras, all the mail vanished from my mailboxes along with the printers and printer drivers. No telling what I did to do that! I did get my mail back, but since everything was backed up on my external HD, I decided to just do an erase and install. Things are much better now, although it was a pain to get mail working again.
But I think if I were in your shoes, I would like to upgrade first and when you feel that everything is working properly, import your data. I started with just my address book and bookmarks, and still haven't gotten everything else imported. I decided to get all the software up to date first, which will take a while with dial up.
Hope this helps!

I just reformatted my Windows XP computer and need help transfering everthing from my iPad and iPhone back into iTunes

I recently had to format my Windows XP Pro computer and need to transfer all the iTunes information from my iPad1 and iPhone4 back to my PC. I could use some help, everytime I try it it says it will delete everything on my iPhone/Pad and reload everything from the new iTunes (now only 54 songs instead of the 342 that I have on my iPhone right now.)

You have a backup of your computer, or at the very least of your iTunes media, correct?
Simply copy your backup of your iTunes media into the iTunes library on your new computer.
Connecting and syncing your device to the new computer without first recovering your iTunes media is a really, really, really bad idea. iDevices are designed to ONLY sync with one computer. When you plug your device into a new computer, it will wipe all media on the device when it syncs. The only media you may be able to salvage and transfer to the new computer would be anything bought directly on the device.
If you do not have a backup of your iTunes media, then you will want to look at a way (using software from a third party company) to extract the media from you iDevice.

Creating pdf files from word document and allow copying of content

I generate word documents and then save them in PDF format before sending out to clients. Sometimes these documents contain quite a lot of data in table format and I want my clients to be able to copy the data from the tables and be able to paste it into excel. How do I save as PDF and still allow copying of content?
Thanks

Open such a PDF in Adobe Reader: File | Properties | tab Security. It will tell you if copying is allowed or not.
I don't know if you can change these security options from Word; you'll have to ask Microsoft. To change them after the PDF was created, you will need Acrobat.

Activation of Business Content Datasources in CRM Source system

Hi,
      My Requirement is to activate all Datasources in CRM Develoment server.I have select the entire node in RSA5 and click "Activate Datasources".But for each Datasources system is askin for develoment request.Is there any procedure to activate all Datasources with single Development Request.
Regards
Vishal

This section describes the general settings necessary for BW Integration in CRM.
If CRM is not involved in your scenario skip this section.
Transferring Application Component Hierarchy (CRM)
Procedure
This step has to be carried out in the CRM system.
IMG Menu     Integration with Other mySAP Components  Data Transfer to the SAP Business Information Warehouse  Business Content DataSources  Transfer Application Component Hierarchy
Transaction code     RSA9
Confirm the security check: Do you want the content application Transfer Component Hierarchy? with YES.
If a dialog box appears requesting the user to enter a development class, enter a development class in the customers namespace and choose Save or choose Local object.
If no error message is sent the application component hierarchy has been transferred successfully.
Cross Connectivity:
It describes all settings that are necessary to connect the components of the SAP.system landscape with each other. The settings for each combination of two components to be connected are described in a separate structure node. The separate section headings make it possible to identify the activities required to connect certain components with each other. The section headings for components that are not part of the installation can be skipped
Connecting SAP BI with SAP ERP, SAP CRM
Procedure
To carry out the activity, choose one of the following navigation options in the SAP BI system:
Transaction Code     RSA1
SAP BI Menu     Modeling  Data Warehousing Workbench: Modeling
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Field     Entry
Target computer (server)                            Server of the SAP ERP, SAP CRM or SAP SRM system
System ID     System ID of the SAP ERP, SAP CRM or SAP SRM system
System number     System number of the SAP ERP, SAP CRM or SAP SRM system
Background user in source system     RFCUSER
Password for source system     welcome
Background user in BI     RFCUSER (can not be changed in this activity)
Password for BI user     welcome
9.     On the dialog box Please log on as an administrator in the following screen choose Continue.
10.     Log on to the Source System with your administrator user. Choose the correct client.
11.     On the dialog box New Source System Connection choose Continue.
12.     On the Replicate Metadata dialog box, choose Only Activate.
The building block CRM Lead Analysis describes the all the required activities to analyze the Marketing Lead Analysis data from SAP CRM in SAP Business Information Warehouse.
The analysis is carried out with the following queries of the InfoCube 0MKTG_C01 CRM - Lead Management (SAP BW Business Content).
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
1.     Channel Analysis: This query is used to determine the best channels by which business partners are contacted in the context of a marketing campaign. Following each marketing campaign, the lead manager can compare the success of a given channel to those of others.
2.     Efficiency Reporting: This query is used to analyze the efficiency with which leads are qualified. By navigating to the sales organizations and the responsible employees for the leads, it is possible to assess how efficiently lead teams are working and to identify areas for improvement.
3.     Historical Evaluation: Use to help analyze and compare leads over different intervals (comparison of different quarters or years for example) to see if general characteristics in the processing of leads can be identified for these periods.
4.     Lost Leads: Provides an overview of the number of lost leads in a particular period and the reasons (implemented as a navigation characteristic) for the loss of the leads. This query is used to analyze the main reasons why leads might be lost, with a view to developing new strategies for overcoming these weaknesses.
5.     Channel Mgmt.: Top-n Lost Leads (Current Year): In a Channel Manager Portal, this query provides an analysis of the leads lost by a Channel Manager over the past 12 months. Channel Managers can also view the leads lost by their Channel Partners. In a Partner Portal, this query shows the top-n unsuccessful leads distributed by a Channel Manager to a Channel Partner. Partner Manager can see the lost leads of the Partner Employees over the year. Partner Employee can view his lost leads over the year.........
Before starting activities in this building block, you need to perform or check the following steps:
1.     From the BW Connectivity building block the following activities have to be completed:
a.     Local Settings è SAP CRM: all activities have to be completed.
b.     Local Settings è SAP BW: all activities have to be completed.
c.     Cross Connectivity è Connecting SAP BW with SAP R/3, SAP CRM, SAP SRM: Connect your CRM System.
2.     From the General Settings for BW Integration building block the following activities have to be completed:
a.     In section General Settings in CRM all activities have to be completed.
b.     In section General Settings in SAP BW all activities have to be completed.
Hope it will helps you........

Error in transfer structure while activating the business content

Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.

Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Error InfoObject inactive while activation of Business content for cube

I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM

Hi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye

Transfering 0CUSTOMER from R/3 and activating in Business Content

Similar Messages

Maybe you are looking for