Transfering clips from one 'project library' project to another

When I copy and paste clips from one 'project library' project to another 'project library' project it somehow brings along all the deleted material that was taken out of the finished product. Can't even figure out how this is happening... I'm trying to make different versions of a music video with most of the same clips and transitions. (imovie '09)

Thank you soooooo much! I don't know if this is possible, but I wanted to add beat markers to the music first before I added the clips from the other project. When I duplicate the project,it also brought along the music. I know you have to add beat markers to the music before you add clips. So is there anyway to lay the music down first then add the duplicated project (minus it's original music).
THANKS for your time!

Similar Messages

  • I can't get clips from one imovie 4 project to another.

    Why can't I have two imovie project open at once? I have an imovie that I want to copy some clips from and when I open another imovie, the original close so I can't drag them in. I also cannot copy a clip and then paste it into another imovie.
    According to the imovie help I should be able to have up to 10 imovie projects open at one time. I cannot get two.
    Help????

    That is the expected behaviour for iMovie 4. In iMovie 6 you can do what you want. (I don't remember if you can do it in iMovie 5.)

  • Transferring images from one iPhoto library to another.....

    I recently went on holiday and took lots of photos and loaded them daily onto my MBP, however now I am back home and I would like to transfer the holiday photos to my iMac which holds my master iPhoto library.
    What is the best way to go around this to ensure that I do not lose any images and/or image quality.
    Thanks in advance.

    Ideally just plug your camera into the other computer and import the pictures.
    If the pictures are no longer on the camera then put both your Macs on the same network and turn on Photo Sharing: http://docs.info.apple.com/article.html?path=iPhoto/8.0/en/6371.html
    __You can then drag the photos from the one computer's iPhoto Library to the other.
    Alternatively you can highlight the pictures you want on the other computer and go to File > Export > File Export > Kind > Original and export to a folder on the desktop. You can then move that folder using File Sharing or an external drive to the other computer and import them there.
    And Finally, you could burn them to a disk and then bring the disk over.
    All these methods give you the exact same image you imported to iPhoto originally. No loss of image quality.
    Hope that helps.

  • Help for transfering data from one user' all tables to another

    Hello guys,
    I have trim the extra sizes of columns in almost all tables of my database. Before doing this, I saved the data of tables by creating another user "User1" with the same objects and importing dmp file in it. After this I cleared my original objects and reduced the extra sizes of columns alomost in all tables.
    Now I want to transfer data from backup user "User1" into my original user's "User" tables.
    Can any one guid me with the way of doing so, so that I could do it just through 3 or 4 lines of code instead of individualy table wise transfering the data...??
    regards
    Kashif

    SQL> select 'insert into '||table_name||' as select * from user1.'||table_name ||' ;' from user_tables where table_name in ('EMP', 'DEPT') ;
    'INSERTINTO'||TABLE_NAME||'ASSELECT*FROMUSER1.'||TABLE_NAME||';'
    insert into DEPT as select * from user1.DEPT ;
    insert into EMP as select * from user1.EMP ;
    2 rows selected.
    SQL>You could spool the output of the query above to a .SQL script file and then just run it within the same script using @@script_name.SQL.

  • Transferring MUsic from Iphone to Library when using another computer

    Hi
    Is there a way to transfer the existing music on the iphone to itunes library when using a second computer?
    Cheers

    Not really.
    You can transfer itunes purchases:
    File>Transfer Purchases
    You can only sync with ONE computer at a time

  • Transferring Playlist from one PC laptop computer to another

    How do I save my existing playlists on my old PC laptop and transfer them to the new PC laptop? I lost my playlists the last time I upgraded to a new PC laptop and don't want to suffer that loss again. Can anyone help? Thanks

    You have to burn the playlist to a CD, flash drive or hard drive. Those are the only ways. You will have to type in your iTunes passowrd on your desktop.

  • Can I copy clips from one project to another?  The clips are still frames captured within a video event.

    Can I copy clips from one project to another?  The clips are frames saved as stills from a video event.  I try the copy & paste but it does not seem to work.

    The video was converted into MP4 and then I could get it into iMovie events.  I had right clicked and saved farmes as stills.  ABout 50 of them,  When I tried to copy and paste those stills into another project I couldn't. They came up blank.
    I ended up going to a Genius appointment at my APPLE store this afternoon and was told that those "stills" aren't really anything. Not a .jpg or video, so the program doesn't recognize them.  So instead I'm using the Project with the 50 stills and copying other .jpgs and video into it.  (This is for a 1961 Class Reunion, so it's old stuff).  Seems to work so far.
    So bottom line seems to be I can use these stills created from a video in the project in which they were created, but no where else.  Do you know a way around this?

  • I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

    I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

    You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

  • How do i select a clip from one project and enter it into another?

    how do I select a clip from one project and enter it in another?

    This doesn't seem to relate to Adobe Reader. Please let us know the product you are using so we may redirect you or refer to the list of forums at http://forums.adobe.com/

  • How do I transfer a clip from one project to another?

    How do I transfer a clip from one project to another?
    [Title edited to remove personal information... Mod]
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]

    Gene
    Thanks for the reply.
    For now assuming that you are using Premiere Elements 11, 12/12.1, or 13/13.1 on Windows 7, 8, or 8.1 64 bit....
    I am not sure that Left and Right channel audio editing is the answer to your DVD echo issue, but the opportunities for audio channel editing in Premiere Elements would include (before burn to)
    1. Audio Mixer - Balance.
    2. fx Effects/Audio Effects
    Please refer to https://helpx.adobe.com/premiere-elements/using/effects-reference.html#audio_effects
    for explanations of the Audio Effects.....
    Balance
    Channel Volume
    Left Fill, Right Fill
    Invert
    Swap Channels
    And, there is the free audio editor, Audacity Audacity: Free Audio Editor and Recorder for channel editing.
    Do you hear the echo before the burn to disc?
    Is any of the Timeline video content from your cell phone? If so, did you have any issues with a variable frame rate when you were preparing the video in Edit area for burn to in Publish+Share?
    What audio effects, if any, did you apply to the Timeline audio content prior to burn to?
    Please consider.
    ATR

  • Moving a Clip From One Project to Another

    How do you move a clip from one project to another keeping the sound clip and title that was used on that clip?

    As far as I can tell, you can COPY all, or some, of the video clips (and stills) with transitions and FX and PASTE into a different Project. But you can't copy titles or audio tracks.
    However, you can make a QT movie of the segment you want and import it. If it's short use 8-biy uncompressed or ProRes 422.
    Or you can DUPLICATE what you need, and and new clips to the duplicate.

  • Navigating from one Web Dynpro app to another not belonging to same project

    Hi All,
    I wanted to know is it possible to navigate from one Web Dynpro app to another which does not belong to the same project. if yes how.
    Regards
    Sid

    Hi Siddarth,
    If you want provide the interaction between two Web Dynpro applications then you must develop those projects as Development Components as DCs provides the reusability of the components created.
    You can  through these link to find out more information:
    Where to start DC creation  ?
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd0e0401-0801-0010-aaab-d0e1742da383">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd0e0401-0801-0010-aaab-d0e1742da383</a>
    Server Side Eventing:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/19e6e990-0201-0010-eca6-a62e342eaad3">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/19e6e990-0201-0010-eca6-a62e342eaad3</a>
    Regards,
    Jhansi

  • How can I move clips from one library to another? Clips are still in original drive and not in new drive.

    I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
    I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
    Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
    I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
    Thanks in advance.

    Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
    Thanks for your help!

  • I transferred my iTunes library from one external hard drive to another and added more music on the same day. How do I get rid of my duplicate files without going through them one by one which would take forever?

    Please help. I have transferred my iTunes library from one external hard drive to another plus added additional music now I have duplicates of the same music in many albums. How do I delete the duplicates without going through them one by one which would take forever? I understand how to get the "show exact duplicate" feature up on iTunes but, because they were added to the library on the exact day I can't seperate them I'm that manner. So each duplicate is right next to eachother in the exact duplicate screen.

    My DeDuper script is designed to help clean up. See this thread for background.
    tt2

  • How can I import Canon GPS location from one picture in project to remaining pictures in project?

    How can I import Canon imbeded GPS location from one picture in project to remaining pictures in project?

    If you have several photos taken at the same location you can use the Lift&Stamp tool to copy the GPS data to the other images.
    Seelct the image, press the "Lift" button, deselect all tags in the Lift&Stamp HUD but the GPS coordinates, then select all photos taken at the same place and and press the "Stamp" tool. (marked by the down arrow)
    Alternately use the "Places View". You will see the photos with a GPS location marked by a pin. Drag the photos you want to assign to the same place simply to that pin on the map and they will be assigned to the same place.
    Regards
    Léonie

Maybe you are looking for