Transfering custom library

HI
I have a lot of custom shapes, behaviour settings etc ..and other content saved in motion 5 on my personal mac, now I need to transfer it to my work mac but I can't find where it is saved.Can anyone tell me where to find it  ?
there is no motion folder in the root > library > application support
there is a final cut pro folder but no content of mine is there
where does motion 5 save your custom content ?
Josh

Look in "Motion Projects" and "Motion Templates" folders in your Movies folder. That is likely where they are located.

Similar Messages

  • Transferred itunes library from Windows XP PC to new Windows 7 PC. plugged in 3rd gen Ipod. Ipod icon appears along with playlists, music etc. Songs are grayed out and won't play. Please help!

    I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?        

    Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
    That "itunes file from the old PC"?  Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
    All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
    That's on the iPod, correct?  Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC?  Are the songs in iTunes still playable?
    This document provides the steps to transfer a complete iTunes library between two computers.  See the section called External drive.
    iTunes: How to move your music to a new computer - Apple Support
    There are many steps, but this is a summary.  (1) On the old PC, consolidate all of your iTunes data into the iTunes folder.  (2) Copy this iTunes folder to the external drive.  (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive).  When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
    If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document.

  • How can i get all the missing artwork after transferring my library

    Help i'm missing a load of artwork after transferring  itunes library from old widows laptop to new imac. I have tried getting album artwork from the advanced menu but it hasn't found all of it only 70 album artwork out of 190 is showing!!!!! been trying for three days to transfer and get it all but to no avail Help!!!!!!!!!!

    You need to transfer your iTunes library, not just the media.
    Copy the entire /Music/iTunes/ folder from your old computer to /Music/ on the new computer.
    Inside this folder, rename the iTunes library.itl file to iTunes library.
    Launch iTunes.

  • I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
    To get all your content off your connect your iPad to your new computer.
    Then use a 3rd party piece of software to transfer your content
    I have found Senuti useful but there are others listed in the article I linked to in a previous post.
    https://discussions.apple.com/docs/DOC-3991
    That will let you transfer your non purchased content
    For Purchased content log in to iTunes on the new computer
    In Itunes Store click on Purchased under the Quick Links section on the right.
    Download any music by clicking on the cloud button

  • How can we setup a prefix namespace for a custom library in FB 4.7

    Using 3.6, we are creating a custom library.
    We need to be able to use a prefix such as "MyLib" when adding library components to an MXML file in an application.
    Right now we get <ns:MyButton. . .> and we need <myLib:MyMyButton . . .>. Any other library used gets <ns1:...<ns2:... etc. Not very usefull to identify the source of the component.
    In the library, we have the manifest.xml and design.xml. The library is functional except for the prefix.
    manifest.xml
    <?xml version="1.0" encoding="utf-8"?>
    <componentPackage>
              <component id="MyButton" class="com.test.MyButton"/>
    </componentPackage>
    design.xml
    <?xml version="1.0"?>
    <design version="2">
              <namespaces>
                        <namespace prefix="myLib" uri="library://flex/myLib"/>
              </namespaces>
              <categories>
                        <category id="MyLib" defaultExpand="true"/>
              </categories>
              <components>
                        <component name="MyButton" namespace="myLIb" category="MyLib" displayName="MyButton"/>
              </components>
    </design>
    When building the SWC, the assets includes the manifest.xml and design.xml files. The Namespace URL library://flex/myLib and manifest file location are also set. The compiler arguments contains -include-namespaces library://flex/myLib
    Is there  fix for this?
    I understand that the "design" part has been removed from 4.7, but why would it affect the mxml prefix?

    Any feedback from Adobe people that worked on FB 4.7 and the removeal of the design mode?
    Are they related? Any suggestions?
    Having random namespace prefix being generated is very annoying.

  • Call Custom Library built in type is not available in form personalization.

    Hello All,
    In our Vision instance(EBS 11.5.10.2 Dev 6i Patchset 15) Call Custom Library built in type is not available in form personalization..
    Please suggest

    probably wiser to post this in the E-Business forum
    General EBS Discussion
    your welcome

  • Transferring Itunes Library from WD Passport to Windows XP

    I have a 250 G WD passport that I used to back up my itunes Music. Transferring itunes library to the WD was successful. I then formatted my C Drive. Once my computer was back up and running I plugged in my WD Passport and then downloaded itunes from your website. Once loaded, itunes immediately started to upload the music from the external drive. Very cool, until I realized that it just copied the names of the songs not the actual files. I thought it was creating a library on the C drive too, but it wasn't. Okay, so I went back to my itunes music file and made sure all of my songs were following the same path as the path within itunes. Everything is there - the paths are the same, or at least they appear to be. I still cannot get itunes to recognize the songs. It says it cannot find the path would I like to find it. I can find the song that way, but I have thousands and thousands of songs. The thought of having to find each and every one seems tasking. Bottom line, itunes is trying to read off of the external drive not my c drive. How do I get itunes to see my itunes library on my c drive? Thank You!!

    Just solved the problem. Needed to launch iTunes on the MBA, then went to File, Add to Library, then marked entire list of songs and clicked "Open."

  • Transferring iPhoto library from old MacBook Pro to new Yosemite Mac Mini

    Please can someone help me figure out how to do this correctly? My old Macbook (4-5 years old) died and I ended up buying a Mac Mini the other day. The store backed my old iPhoto library up for me on an external hard drive. I simply transferred the library across to the new Mac and opened up iPhoto. However, everything is out of sync- no albums etc, plus for some reason tons of photos with people in them now have been duplicated with just close up head shots. Something I have never created. Strange.
    I followed the instructions when prompted with this message....'The photo library needs to be upgraded to work with this version of iPhoto.' But just as I think it has been upgraded, I then get this message 'The photo “edit1.jpg” could not be opened, because the original item cannot be found.' So I press cancel, but then it reappears for so many photos that I just give up.
    What to do?! Any tips would be greatly appreciated. Thank you

    Dd you download and run the iPhoto Library Upgrader?
    And did if then open and upgrade the library?
    The Mac store did a complete back up of my old Mac on an external disk, but I have a feeling that maybe the library backup within this just isn't right.
    There are two ways, your photos could be missing.
    Either the iPhoto library has a corruption, iPhoto cannot find the photos inside the library. Then rebuilding the library can help, see Terence Devlin's post:  iMac iPhoto Media library
    Try both options 1 and 2 from the post, if the first did not solve it.
    The photos may really be missing in the library, but still be somewhere in the home folder backup on your backup drive. First try connecting the missing files by rebuilding as described above. If still files are missing after that, search for them on your backup like this: When you get a warning, that xxxx.jpg is missing, search for that photo on your backup with Find Any File. If you are lucky, all photos are in the same set of folders: You can download Find Any File here: The trial is free: http://apps.tempel.org/FindAnyFile/index.htmlhttp://apps.tempel.org/FindAnyFile/index.php
    Find Any File can search inside packages, where Spotlight will not search.

  • HT4527 I transferred my library to a new laptop and everything appeared on the screen. I turned off the old computer and the library disappeared. How can I make it a permanent transfer as my old computer is being scrapped. Thanks

    I transferred my library to a new laptop and everything appeared on the screen. I turned off the old computer and the library disappeared. How can I make it a permanent transfer as my old computer is being scrapped. Thanks

    Hello Terryfrank,
    Congratulations on your new laptop!  Also, thank you for the details of the issue you are experiencing with transferring your iTunes Library to your new computer. 
    I notice that you are coming from the article “iTunes: How to move your music to a new computer,” and it sounds like you might have used the Home Sharing method outlined in that article. 
    With Home Sharing, you can stream content from another computer, and it sounds like that is how you have it currently set up.  The last step is to import the content to your new computer.  Use these steps on the new computer (while the old computer is on) to import the music to your new computer’s hard drive:
    Once your new computer sees the Home Share from your old computer, click that Home Share on the left side of iTunes on your new computer.
    Select the content in the Home Share that you want to transfer to your iTunes library on your new computer, or choose Edit > Select All to choose all of it. Then, click the Import button in the bottom-right corner of iTunes.
    Wait for the content to finish transferring.
    Additionally, if you want to transfer your playlists, you can export them from the old computer to the new computer:
    Transferring playlists
    If you want not only your content but also your playlists to exist on your new computer, you will want to transfer a copy of all your playlists from your old computer. To do this, choose File > Library > Export Library on your old computer. Save the XML file that is created to your desktop.
    Send the playlists file to yourself as an e-mail attachment, use an external drive, or use file sharing to move the playlists file to your new computer. Once the file is on your new computer, open iTunes and choose File > Library > Import Playlist. The import process will remove any items from the playlists that you didn't share via Home Sharing.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Using Time.expression in a custom library

    Hello All,
    I am trying to write a piece of code in a custom library. Upon trying to save the code, it tries to compile and kicks out a message "...cannot resolve symbol symbol : class Time location..."
    Does any one know which class to import in order to use the Time function?
    I have already imported  com.redwood.scheduler.api.date.*;
    Thanks
    Daniel

    Hello,
    The code in a library works slightly different then the expressions.
    You can use:
      DateTimeZone myDate = DateTimeZone.expressionNow("add 1 day");
    regards Gerben
    Edited by: G. Blom on Feb 24, 2011 12:49 PM

  • Custom Library 'Adobe LiveCycle Workflow Fields'

    Hello,
    I'm just reading through the document 'creating_workflows.pdf' of Workflow 7.0. In the chapter about designing forms for workflow it says that the custom library is available with the SDK, however I was not able to locate the library. There are also some workflow fields in Adobe Designer 7.0, but I think they are for older workflow versions, because the field names don't match the ones in the documentation ('creating_workflows.pdf'). Can somebody help me locate the library or tell me which fields to use for my forms?
    Thanks!
    Regards, Karin Garreis

    Hi Karin
    The library is actually in a file called Adobe LiveCycle Workflow Field.xfo which is part of the Workflow SDK. You will find it in:
    \LiveCycleWorkflow7_SDK\Misc
    See:
    Mike J. Potter, "Adobe LiveCycle Workflow 7.0 SDK (38.3 M file)" #5, 20 Sep 2005 12:48 pm for info on how to get the SDK.
    In order to install this library, you need to create a new Group in the library palette, and then add this file to the directory that gets automatically created to hold this group. The usual location for new groups is:
    C:\Program Files\Adobe\Acrobat 7.0\Designer 7.0\EN\objects\[grpname]
    I hope this helps...
    Howard
    Howard Treisman
    Avoka Technologies
    Specializing in LiveCycle Components and Solutions
    http://www.avoka.com/avoka/qpac_library.shtml

  • When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching.  Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod too.  Can I move these back?

    When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching.  Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod touch too.  Can I move these back?

    weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
    how weird is that?
    oh well JG - maybe you mixed a magic potion for me?
    anyway, thank you for all the help.
    to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
    cheers
    P

  • Transferred my Library to new laptop, but how to associate/sync iPhone with new laptop?

    I got a new laptop. The old laptop is still working. I transferred my library using the Home Sharing method and all of my items were moved except my apps. I plugged in my iPhone to the new computer and used "Transfer Purchases from iPhone" option and all of my apps were added to the library. But, now I don't know how to associate the iPhone with the new computer. When I plug in my iPhone to the new computer. It starts to sync. It says steps 1 through 3, spins for 20 seconds and says complete, but nothing was done. I do not get the "this iPhone is associated with another library" message when I plug it in to new computer, perhaps because I've authorized both computers. All I can find in my searches is how to avoid losing all of your data and how to transfer your library, but none has dealt with this exact situation. I am stumped as to how to get iPhone associated with new computer. Can I transfer my backup from the old computer and restore from backup? Other thoughts? Sorry if the answer is somewhere (I'm sure it is), but I have spent two days looking.

    Randers4, so I carefully followed the directions (only one that confused me was about adding a fake address/calendar entry, is that for Macs, I'm using a PC?.)  I restored it from the backup and everything looked good. I had hope, the final step says to sync it and when I did, I had the exact same problem. It spun, went quickly through only 3 steps (even though there were 7 sync steps with my old laptop) and nothing changed. It clearly didn't sync.
    So, I had an idea that I would back up everything by right clicking in the left pane and forcing a back up on the new computer, and then erasing the entire phone and then restoring from the backup I just made to see if that would make a difference. So, after I tried that and it restored, it was weird. All of my settings were there. Some folders were there, my pictures were there, but all of my apps, folders, music and video was missing and it still wouldn't sync. So, then I had to plug it back into my old laptop and do a restore from there to get that stuff back.
    Shouldn't I get a message when I plug the iPhone into the new laptop saying this phone is connected to another computer? I tried "Reset Warning Messages" but it doesn't do anything. At this point, I don't care if I lose some of the stuff from my iPhone (texts, etc)...but I want it to sync to the new computer because my old laptop is on its death bed.
    So frustrating, all of my iTunes content is on the new computer, the only piece that is missing is getting it to "talk" to the iPhone. Times like this I wish I wasn't a poor teacher and could afford to get a nice Mac laptop.

  • Using filters in custom library/viewer

    I'm building a custom library/viewer using the sample files from Derek Lu's article "Creating an HTML implementation of the DPS default library" as a base. It's a great way to get started! What I would like to do is add functionality to use the filter-functions present in the default library/viewer. Does anyone know if there is a way to get hold of the source-code for the default viewer or if anyone know of any documentation that could assist me in this? Has anyone in here experience in building a custom library/viewer with filter-functionality?
    Big thanks for all help I can get :-)
    / Johan

    I'm building a custom library/viewer using the sample files from Derek Lu's article "Creating an HTML implementation of the DPS default library" as a base. It's a great way to get started! What I would like to do is add functionality to use the filter-functions present in the default library/viewer. Does anyone know if there is a way to get hold of the source-code for the default viewer or if anyone know of any documentation that could assist me in this? Has anyone in here experience in building a custom library/viewer with filter-functionality?
    Big thanks for all help I can get :-)
    / Johan

  • Default Value to Form using Custom Library?

    In Custom Form A, in the global variables i have store the value , How to populate default value to Form B using in custom library.
    I tried using COPY, but its not working?
    COPY('GLOBAL.EXP_PRO',':IT_QF.PROJECT_NUMBER');
    Is their any other way to do it?
    Thanks!

    Zaafran Ahmed  Posted: Oct 26, 2010 2:05 PM
    COPY(:GLOBAL.EXP_PRO,'IT_QF.PROJECT_NUMBER');user12207320 Posted: Oct 26, 2010 2:40 PM
    I tried it throws a error,bad bind variable error >
    This will throw an error because the COPY built-in takes 2 Varchar2 parameters (Source and Destination). When you use the COPY built-in, you pass references to the objects not the objects themselves. Therefore, the reference to the global variable :GLOBAL.EXP_PRO would have to be passed as a string to COPY.
    Looking at your original post, you have a COLAN in the destination string. Try the following:
    COPY('GLOBAL.EXP_PRO',':IT_QF.PROJECT_NUMBER');
    /* Change this statement to: */
    COPY('GLOBAL.EXP_PRO','IT_QF.PROJECT_NUMBER');Craig...

Maybe you are looking for

  • Photoshop Album Starter edition 3.2 abnormal program termination

    I have just logged onto version 3.0 and I was offered an upgrade to 3.2 via the message centre. I followed all instructions and downloaded the files. When I now go to open the Album an error message comes up headed: Microsoft Visual C++ Debug Library

  • Newbie question about undo/redo.

    When Oracle changes a data block it records the before-image in an undo segment block. Both changes (data and undo) are recorded in the redo log. The change to the undo segment block is recorded in the redo log so that Oracle can rebuild the undo seg

  • Creating a LINK in ADF UIX table

    Dear sirs... is it possible to create a link for each row in an adf uix table? the link selects the row and forwards to another page. i have seen this in a JSP page, but uix???? best regards

  • When BPM?

    In which case we can go with BPM,as bpm will effect performance. I mean as merge, split, alert configuration we can do without BPM using advanced SERVICE PACK. So Is there anything  missing which advanced SERVICE PACK doesnt support and for that BPM

  • TS3367 I don't have face time in my phone is IOS 6.1.2

    I don't have face time in my phone is IOS 6.1.2!! How I can get Feac Time ??