Transfering data between R/3 and CRM

I am new to CRM, with Knowledge in SD
I have an Org Structure in R/3.
how can i convert the Org Structure and other data from R/3 to CRM, using Middle ware.
how do you provide the link through middle ware?
The Steps involved it the process? etc.

hey,
In oder to transfer the org from R/3 to CRM u will have to run the transaction r3as1 initial download and use adaptor object DNL_CUST_S_AREA. this will ensure that the division and distribution channel that was created in R/3 is brought to CRM.
Now when u create a org in CRM under the tab basic data select the radio button sales(Depends upon the scenario) and mention the sale org that u have created in R/3 here this will link the CRM org to R/3 also mention the R/3 distribution channle and the R/3 division.
Regards,
Diana Dias
Reward with points!!!!!!!!!!

Similar Messages

Kernel Panic while transfering data between MAC HD and network drives

Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report:          1
Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
      Kernel Extensions in backtrace (with dependencies):
         com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
            dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
         com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet            3.1.3
com.vmware.kext.vmioplug       3.1.3
com.vmware.kext.vmci                3.1.3
com.trendmicro.kext.KERedirect              1.0.0
com.trendmicro.kext.filehook   1.5.0
com.vmware.kext.vmx86            3.1.3
com.thursby.kext.cifs    5.1
com.thursby.kext.NetBIOS         5.1
com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleTyMCEDriver      1.0.2d2
com.apple.driver.AppleHWSensor           1.9.3d0
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleUpstreamUserClient      3.5.7
com.apple.driver.AppleMikeyHIDDriver                1.2.0
com.apple.driver.AppleMCCSControl     1.0.20
com.apple.driver.AppleIntelPenrynProfile           17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver       2.0.5f14
com.apple.kext.ATIFramebuffer              6.3.6
com.apple.driver.AppleBluetoothMultitouch     54.3
com.apple.driver.AppleIntelHDGraphics               6.3.6
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AudioIPCDriver             1.1.6
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleGraphicsControl               2.10.6
com.apple.ATIRadeonX3000       6.3.6
com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros9388   426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
com.apple.driver.AppleLPC         1.5.1
com.apple.driver.AppleBacklight              170.0.46
com.apple.kext.AppleSMCLMU                1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
com.apple.driver.AppleUSBCardReader                2.6.1
com.apple.driver.AppleIRController        303.8
com.apple.iokit.SCSITaskUserClient        2.6.8
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleUSBHub               4.2.4
com.apple.driver.AppleFWOHCI               4.7.3
com.apple.BootCache   31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort             2.1.7
com.apple.driver.AppleUSBEHCI              4.2.4
com.apple.driver.AppleUSBUHCI             4.2.0
com.apple.driver.AppleACPIButtons      1.3.6
com.apple.driver.AppleRTC        1.3.1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleSMBIOS                1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
com.apple.security.sandbox       1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall           2.1.12
com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
com.apple.driver.AppleProfileReadCounterAction           17
com.apple.driver.AppleProfileTimestampAction               10
com.apple.driver.AppleProfileThreadInfoAction               14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface           74.2
com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
com.apple.iokit.IOSerialFamily   10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
com.apple.driver.AppleMultitouchDriver             207.11
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib                1.3
com.apple.driver.AppleSMBusController              1.0.10d0
com.apple.iokit.IOFireWireIP     2.0.3
com.apple.iokit.AppleProfileFamily         41
com.apple.driver.AppleHDAController   2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily      1.10
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI           1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport              2.2
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.AppleThunderboltEDMSink     1.1.1
com.apple.driver.AppleThunderboltEDMSource               1.1.1
com.apple.kext.ATI6000Controller           6.3.6
com.apple.kext.ATISupport        6.3.6
com.apple.iokit.IOGraphicsFamily            2.2
com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
com.apple.driver.AppleUSBHIDKeyboard             141.5
com.apple.driver.AppleHIDKeyboard     141.5
com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
com.apple.iokit.IOBluetoothFamily         2.4.5f3
com.apple.iokit.IOUSBMassStorageClass              2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
com.apple.iokit.IOUSBHIDDriver               4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
com.apple.iokit.IOBDStorageFamily        1.6
com.apple.iokit.IODVDStorageFamily     1.6
com.apple.iokit.IOCDStorageFamily        1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter        402.1
com.apple.iokit.IOAHCISerialATAPI         1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
com.apple.driver.AppleThunderboltNHI               1.2.6
com.apple.iokit.IOThunderboltFamily    1.4.9
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOUSBUserClient             4.2.4
com.apple.driver.AppleFileSystemDriver              2.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime         1.4.0
com.apple.iokit.IOHIDFamily      1.6.6
com.apple.iokit.IOSMBusFamily                1.1
com.apple.security.TMSafetyNet             6
com.apple.kext.AppleMatch      1.0.0d1
com.apple.driver.DiskImages     289
com.apple.iokit.IOStorageFamily              1.6.3
com.apple.driver.AppleACPIPlatform     1.3.6
com.apple.iokit.IOPCIFamily       2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6

There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

Transferring Data between MacBook Pro and iMac

My husband has a MacBook Pro as well as an iMac. He uses the laptop when we travel. when we bought the laptop, we transferred all the data on the iMac to his laptop using a firewire connection. It was months ago and I am having trouble remembering just how we did it. Now, though, he wants to copy data from his laptop to his desktop and I need help working that out. He has Entourage installed and that is what he uses for his mail, documents, etc. Where do I go to find those folders and how do I get them onto his iMac. Thanks in advance for any help you can give me!

It would be a mistake to replace a new fully functioning system on your iMac with a potentially dysfunctional one on your MBP. If you need to transfer personal data then you can connect the two via FireWire cable and use Target Disk Mode to transfer your data manually. If you have a MobileMe account, then you can sync your Mail accounts, iCal calendars, Address Book entries, and Safari bookmarks that way.
You can use ordinary backup software to sync two computers connected by FireWire and using Target Disk Mode. You can use a USB flash drive depending upon the amount of data you need to move between the two computers. You can use an external hard drive as intermediary. However, Time Machine is not a utility intended to keep two computers synced.
You should give thought to what you need synched, as your question seems to imply you think that means everything, but I doubt that's what you had in mind.

Difference between SAP MI and CRM Mobile Sales

hi experts,
we need to understand difference between SAP MI and CRM mobiles sales solutions. what are SAP's recommendations: where to use MI and where to use Mobile sales.
can some of you explain the pros and cons of each solution or let me know the place where i get such info.
thanks in advance.
RH

SAP MI apps are aimed at PDAs while CRM Mobile Sales is aimed (and can only work with) at laptops.
PDA solutions are mostly used by sales agents while the laptop solution is more suitable to account managers. The laptop has much more information available that includes:
- Marketing planning and execution capabilities
- Account Planning
- BW Reporting
Mobile Sales for PDAs has more basic functionalities like order & activity management and business partner data maintenance (which are also included in the laptop version).
Message was edited by: João Sousa

What are the alternate methods of transferring data between apps built on ios

Hi All,
What could be the alternate methods of transferring data between apps built on ios?
Please comment.
Thanks
Pankaj

I'm not aware of any apps that can open pdfs from iBooks, but I could well be wrong. There are a small number of apps that will open pdfs from emails, you can also open pdfs from some applications ike dropbox which has an iOS app so you can access any document you can open on iOS and sync between devices and computers.
Sorry if this is all a little vague, I'm not exactly sure what it is you are asking

Transfering data between mac's

Hi,
I have an iMac & a macbook.
How do I transfer a lot of data between the 2?
I take it I buy a firewire to firewire cable.
How do I then go about transfering data.
Many Thanks,
Jeff

How do I then go about transfering data.
Connect them and start up one Mac with the T key held down. You can also use file sharing over a FireWire, Ethernet, or wireless connection.
(46692)

HT1554 Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Hello,
See if this helps...
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

How do I share data between my MBP and iMac?

I have two Genealogy programs on my iMac that I would like to share data between my MBP and the iMac. I would like to gather the data on the MBP and then share new data to the iMac which is where I basically do all of the Genealogy work from, since it is much easier with the larger screen and better keyboard.
Can someone please explain or direct me to a tutorial or procedures if this is possible? Thank You!

Click Apple>System Preferences>Sharing
Check File Sharing. In File Sharing add the folder you want to share with another computer. Then add users. Then proide access previledges such as Read & Write, Read Only, Write Only or No Access.
Now in the System Preferences, Click iCloud, sign in to iCloud. It's free and you can access your Macs from anywhere.
In iCloud, check Back to My Mac.
Do the same to another computer. You're all set by now.

Stop the Sales Orders flow between R/3 and CRM systems.

Hello Experts,
I am facing one middleware related issue.
I am creating a quotation and Order in Crm system an those are replicated to R/3.
But I am creating some orders in r/3 and those are alos replicating to CRM, I want to stop the flow of Orders between R/3 and CRM.
Please let me know where I have to do the changes.
Thanks

Hi,
What Debolina suggests would stop flow of Orders from CRM to R3.
But what i learn from your post is :
you wanna stop Orders flowing from R3 to CRM.
If m coorect in above, then teh solution for you is different:
You have to filter out the orders.
Goto: R3AC1
Select object : SALESDOCUMENT
Goto Filters tab and set the filter as desired.
This would stop the flow of Orders from R3 to CRM
Kindly reward with points in case helpful
Sharif.

Anybody help on integration between IS-RETAIL and CRM application?

hello experts!!
anybody help on how is the business process (or) functionality between IS-RETAIL and CRM application?
i mean integration between IS-RETAIL and CRM application.......

Hi Subha
Since IS-Retail is an Industrial Solution package which was built above the Baseline package,all the Business processes which were there in 4.7 is supported by IS - Retail. You can access the Retail Menu in W10T and S000 for your normal Menu in ECC6..
Regards
Anis

How the hell does a person share session data between JSP page and a Servle

1. How the hell does one share session data between a servlet and a JSP page without using a bean but rather using a normal string variable.
2. When using session scope to access a bean the application complains about not finding the bean on the specified scope, however when I use an application scope the save the same bean, the application does find it.
Please help!!!!!!!
SERVLET:
HttpSession session = request.getSession(true);
ServletContext servletContext = session.getServletContext();
customerID = result.getString("CustomerID");
userName = result.getString("UserName");
session.setAttribute("UserName",userName);
session.setAttribute("CustomerID",customerID);
System.out.println("Customer UserName = " + session.getAttribute("UserName"));
response.sendRedirect("/economics/subscriptions/default.jsp");
JSP PAGE:
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root xmlns:jsp=http://java.sun.com/JSP/Page mlns:c="http://java.sun.com/jsp/jstl/core" xmlns:sql="http://java.sun.com/jsp/jstl/sql" version="2.0">
<jsp:directive.page isThreadSafe="true" session="true" contentType="text/xml"/><jsp:output omit-xml-declaration="false"/><jsp:scriptlet>response.addHeader("x-xslt-nocache", "true");</jsp:scriptlet><pml>
<page type="web" search="y">
     <pageName>Commercial Banking</pageName>
     <jsp:directive.include file="/economics/header.inc"/>
     <jsp:directive.include file="/login.inc"/>
     <jsp:directive.include file="/economics/leftMenu.inc"/>
     
     <content>
     <searchSum>Commercial - Main Content</searchSum>
     Value = <c:out value="${request.session.getAttribute("UserName")}"/>
     </content>
     <jsp:directive.include file="/economics/rightNav.inc"/>
     <jsp:directive.include file="/footer.inc"/>
</page></pml></jsp:root>

For a start, just "session" instead of "request.session" would work better. But why did you post this here and not in the JSP forum? Doesn't seem to have anything to do with Java programming.

Difference between cross applications and CRM cross applications

Dear All ,
I would like to know the difference between cross aplications and CRM cross applications ?
Please help to understand the difference
Regards,
Srini.

Hi Eswar Ram,
Thanks for your response.i have same question?
I would like to know the difference between the following ( Cross Application compenent/CRM Cross Application component)
1. SPRO> IMG> Cross Application components
2. SPRO> IMG> Customer Relationship Management--> CRM Cross Application componenet.
Regards,
Silpa.
Edited by: silpa reddy on Mar 5, 2009 4:11 AM

Difference between ERP products and CRM products .

Hi to all,
can u please answer to my question,the question is what is the difference between ERP products and CRM products .

Well, a google Search would result in some nice beginner Articles...
for eg:
http://www.lockergnome.com/nexus/technobabble/2005/02/14/the-abcs-of-erp-and-crm/
Cheers.

How can I share data between WinXP Pro and Mac OS 10.8.3 via wifi

How can I share data between WinXP Pro and Mac OS 10.8.3 via home wifi.

MartyP wrote:
Or is there a problem with both OS's writing stuff to the
~/Home/Library folder that may be incompatible?
Yes, big time. Mail, for sure, has a different file/folder structure, and would not be happy.
Plus, a number of apps (Apple and 3rd-party) are "Sandboxed." That's a security feature, to prevent malware or bad coding from affecting things it shouldn't. Some of their files, including the preferences files, aren't even stored in the same places!
Or to other places I'm not aware of?
Probably. If you have two versions of the same app, they may or may not expect the same data setup.
To have one User folder for both OS's would save a lot of drive space
Not if you use some or all of woodmeister50's suggestions.
But I'm also not sure how I'd use Time machine with such a set up.
Just as you do now. By default, Time Machine backs-up everything (except things like system work files, most caches and logs, trash) for all users and all internal drives & partitions. By default, it excludes external drives.
You can change those defaults, of course, via TM Preferences > Options.
See Time Machine - Frequently Asked Question #32 for details and considerations of multiple drives.
Presently I backup with . . . clones to other HD's
Good. Yes, clones are different. You need multiple "tasks" to back up multiple drives/partitions. But once set up, that shouldn't be a big deal.

Replicating data between oracle9i(source) and 10g database

sucessfully replicated data between source and target in 10g
Now I have to replicate the data between oracle9i(source) and 10g database(Target) please help me to solve this issue

sucessfully replicated data between source and target in 10g What sort of Replication you talking about ? Is it Object level , Schema level or DB Level ?
Now I have to replicate the data between oracle9i(source) and 10g database (Target) please help me to solve this issue
http://www.freelists.org/archives/oracle-l/08-2005/msg01260.html
Hare Krishna
Alok

Transfering data between R/3 and CRM

Similar Messages

Maybe you are looking for