Transfering data through WiFi or GSM

Hi there,
I need some help here..I want to send and receive data through the wiFi or GSM..Is it possible??What module that I have to use?Please assist me...I need some idea how to start my project..
Please..

A Wi-Fi connection replaces the physical part of an IP based network. You need to buy Wi-Fi access points and configure them to form your network (there are all kinds of access points on the market) and then you need to connect one end to the PXI module (assuming it has an Ethernet port) and one end to the PC (usually through an Ethernet port or through USB). Once you do that and you have the IP addresses of at least one device, you can communicate between them.
To learn how to set up a Wi-Fi network I suggest you go to a local computer store and ask them. I'm sure they'll be happy to sell you some equipment.
Try to take over the world!

Similar Messages

Question about transferring data from 3GS to iPhone 5

I upgraded from 3GS to iPhone 5. Before reading any articles on transferring data through iTunes, I configured my 3 email programs, contacts and calendar (Google). The Apple instuctions state that I should backup 3GS FIRST, then restore to iPhone 5. Question is, if I do the backup and restore AFTER having configured my mail programs, will that cause problems, such as creating duplicate accounts and contacts? I am especially concerned about creating duplicates in my contact list, which would be a semi-horror if I had to delete every other one of over 1,700 names. Perhaps I should delete my email accounts and contact list BEFORE restoring to my iPhone 5, basically start from scratch?

When restoring the device, whatever is currently setup on the device is irrelevant. Everything currently setup on the device will be erased.

How to configure SSL in tomcat and transfer data through HTTPS.

Hi all,
I hav an urgent requirement for transfering data through HTTPS.But hav no idea how to achieve that,using SSL.
For that i have to configure tomcat.What and all i hav to do
download and which and all files i hav to alter for configuring the tomcat.
seeking for ur help,
thank you

Multi-posted.
http://forum.java.sun.com/thread.jspa?threadID=591116&messageID=3079266#3079266
http://forum.java.sun.com/thread.jspa?threadID=591062&messageID=3078566#3078566
http://forum.java.sun.com/thread.jspa?threadID=590987&messageID=3077736#3077736

Data Services through WiFi have suddenly stopped working

Hi there,
I own a Blackberry Curve 8900 on o2 UK. I have a data plan and everything was working fine. As I live in a rural part of England where some areas are black spots for signal, I realised that I can use all data services through WiFi.
I am currently in a region of Afghanistan where there is no GPRS/EDGE coverage, my phone only shows as GSM, however untill last week I was still able to use BB Messenger and email through a WiFi connection.
If I open my browser on the phone, I can still use it to access websites, however when I try to send an email or PIN, I straight away get the red clock symbol. It does not even seem to attempt to send, as the red clock is almost simultaneous with pressing send.
The only event that coincides with this problem is the installation of OPEN DNS on the WiFi network I am connecting to. Is it possible that OPEN DNS could be blocking 'data service' or 'blackberry internet service', if I am right in saying that these features use BIS even through WiFi? What would I need to tell my network administrator to look for?
Any help would be much appreciated,
Kind Regards

Okay after some research I have found that;
- The Host Routing Table should have entries in it,
-Mine doesn't.
It certainly used to have them as I remember checking it, I'm thinking this could have been wiped by changing the SIM cards. Therefore I'm going to need to re register next time I'm an area covered by GPRS/EDGE.
So my next question: Is there any way of registering the Host Routing Table through WiFi or manually adding data? I have registered before and I do have the BB data plan.
Thanks again

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple store

I have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.

Upgrading from Snow Leopard to Lion - couldn't complete as disk corrupt - went through everything - disk utulity, install disk etc. can't be fixed - grey screen - transferring data to macbook pro - unable to transfer photos - says locked volume - help

Hello - tried to upgrade to Lion (software all up to date) could not carry out as disk corrupt - tried to fix using disk utility, no luck, tried through install discs, noluck, screen went grey, went through all the troubleshooting steps advised - could get hard drive button up but wouldn't launch - took the last troubleshooting step (before wiping hard drive) and transferred data to MacBook Pro - all fine except for iPhotos - comes up as "locked volume" - have been through all the trouble shooting steps to all read/write access - file info says I have read/write access- any ideas - otherwise I have lost a bucket load of photos :-(
Thanks

See this tip if your data isn't backed up:
https://discussions.apple.com/docs/DOC-1689
In the future always backup your data before updating.

Can I send texts through wifi without using data?

I' m currently out of the US and want to know if I can send and recdive texts through wifi and not use any data. Same question for my emails.

zellerandy wrote:
airplane mode will disable wifi mode
Airplane mode disables all the radios (cellular, wi-fi, bluetooth), but once airplane mode is enabled, you can then turn on wi-fi and use available wi-fi networks without worrying about inadvertently using your mobile data, as SuzyQ stated.

I cannot access my apps through wifi or data usage.After tapping the screen it will start to load then stops.

I cannot access my apps (candy crush or fb) through wifi or data useage. It will start to load then returns back to the home screen.

Answered in your other thread - you only need to post once.

Slow Wifi speed when transfering data from USB drive?

Hello guys,
Am I the only one to get slow WiFi speed when transfering data from USB disks or keys?
This is the new Mac Mini July 2011 (Macmini5,2)
Intel Core i7, 2.7 Ghz
8 Go 1333 MHz DDR3
Mac OS X Lion 10.7 (11A2061)
Thanks
Nicolas.

Hello again,
I'm also having this issue when using a Bluetooth Magic Mouse when downloading file. Is it a problem with the firmware or the BUS?
Anyone have the same issue?
Thanks
Nicolas.

Photos not transferring through wifi from iPhone to iCloud or Photos

I'm partly through a very slow migration to Photos, quite possibly related to being on a very slow and throttled ISP connection. Apparently not much I can do about that … I suspect much of the problem is related to having too many large videos in my slimmed-down Aperture library …
My issue here is that not a single photo has migrated automatically from my iPhone to either iCloud Photos (as seen through the online portal) or to Photos on my iMac.
I can synch photos by plugging my iPhone 6+ into my iMac. But I want the photos to transfer through wifi …
(I've updated everything to the latest version of software, and have lots of open space.)
I'm frustrated by Photos, yet willing to let my photos transfer completely to Photos and the iCloud to see if it actually turns out to be usable. I like the aspect of having my photos summarized on my iPhone — though I'm not sure I actually will use that feature.
Aperture works much better as a cataloguer for me — I may return …

If you are saying that you are waiting for photos that you have taken on your phone to transfer to the photos application on your Mac using the iCloud photo library whilst you are loading photos from the photos application on your Mac to the iCloud photo library, Then yes I believe you will have to wait.

Phone is connecting and transfering data in the ba...

Today at work my Nokia 6710 did start to transfer data in the background without my interaction. I was typing a sms while the symbol for data transfer below the 3G lit up. Did a quick check in the menu->settings->connectivity->Conn.mgr. Yes, one active connection was sending and receiving data, small amounts 3-4kb, then idle.
I ended the connection in the Conn.mgr. Closed all the apps in the phone and waited a minute. Then it started one new connection in the background again! Same procedure, checked and closed it...! This did not stop, every time the phone started a new connection after a minute?
I did try to find what could cause this, but no success. What is going on, any ideas for what to check?
I finally deleted my 3G access point in menu->settings->settings->connection->destinations->internet
This did stopp the phone from connecting and transfering data.
Back home I connected to my WiFi at home, used the browser and closed the connection. Guess what, the phone did now connect via the WiFi in the background doing exactly the same type of small data transfer - without asking!?
What is this? I downloaded the latest F-Secure mobile version to check for virus, but nothing, it was clean.
I did shut down the phone, will not use it until I can stop these unwanted connections and transfers. Please help.

Finally I found the reason for these data transfers. The upgrade of the mentioned files did have something to do with all of this, but the removal of the files did not help.
So, I did go through all the settings in again for Connections and the setting for Share Video were set On...? Turning this setting Off did stop the background data transfers.
Problem solved perhaps. But I still wonder why the Share Video setting did start sending data while the phone was not in use? A bug? A virus? A hacker trying to activate the webcam?

320N Freezes when trying to transfer data over wifi

I have the 320N and I am very frusterated. I would just take it back, but I bought it brand new on Amazon.com, meaning I will have to pay shipping because I threw out the box and the return shipping form for RMA's! I don't even know if Amazon will take it back without that paperwork, but anyway here's the issue...
I don't have any N cards yet, but I upgraded to this router because my home internet service is faster than what my older WRT-54g could route. This new router does route and I can now achieve the rated speeds of my ISP (50/10 mbps).
I can transfer large files 6+ GB WIRED between any of the LAN ports on this device. However if I try to transfer much data over wifi, the router will simply stop working. The lights on the front work fine, they blink like there is activity, and the power LED is solid, but it won't pass traffic and the wifi SSID dissapears. I run a constant ping to the router (ping -t 192.168.1.1) and I get <1ms replies. On my laptop I initiate a download of a 1GB file which is shared in my windows 7 homegroup. Within a minute or two the constant ping to the router starts timing out. Internet access to anything (wired or wireless) instantly ceases. New introduced devices will not grab a DHCP address. Existing PC's whom already have their DHCP address can talk to each other only if wired. The wireless transmitter stops broadcasting the network and devices no longer see it on the airwaves. The only way to fix it is to power cycle it.
It doesn't even have to be a large file over wifi to transfer. Just now as I'm typing this post I noticed the constant ping on my other monitor started timing out. I power cycled the router in time for me to submit this post. In fact I had to do it three times in the time it took me to write this post. This is the most frustrating experience I've had with any wifi ap/router, and I play with Cisco gear at work that run real IOS.
Here's what I tried so far.
Reset factory defaults by holding in the rear reset button for over 30 seconds.
I can confirm this resets the defaults as the password and all other settings are back to default.
I tried WPA2 Personal. I tried WPA. Router still freezes.
I tried it with just the default settings. Router still freezes.
I've reset the router numerous times. Still freezes.
Power cycle it for more than a minute. Still freezes.
Reflash it with Linksys's latest firmware. Still freezes.
What do I do next? I have a feeling it's the same problem as in a lot of the HP Printer firmware boards. That problem is poor solder joints on the BGA processor connection. To fix that you put the formatter board in an oven at 400 degrees for 5 to 8 minutes. After that time you just let it cool to room temperature. The oven heats the poor solder joints enough so that it reseats and gets a better connection. There are hundreds of posts of success on this. I also hear that the solder connection problem exists for many of the older revision Xbox 360 game consoles causing the infamous "Red Ring of Death".
So do I try to fight with Amazon to take this back and eat the shipping?
Do I void my warranty, open the device up and put the board in the oven?
Do I buy another router from a closer store, but then put this one in the box and take it back?
Do I just cut my losses?
Do I just use this as a wired router (disable Wifi) and hook up my WRT-54g and make that act as just an access point?
Thanks for the advice.
Solved!
Go to Solution.

Ok I've had my replacement 320N for almost 1 full week now, and while at first it was fine, come Sunday it appears to freeze during heavy transfers. I was streaming an HD movie to the laptop connected to the TV. 3/4ths of the way through the movie it started skipping. What do you know, the whole network was down. No internet or anything. Power cycle the router and everything was back up. Needless to say, I finished the movie through the wired connection. The next day I tried copying 8GB of data wirelessly. The SSID vanished 1/3rd of the way in during the transfer.
What is wrong with this stuff? Linksys doesn't make things like they used to. This 320N is so cheaply made I don't think I could recommend it to anyone. I might see if I can send this back to Amazon and get a Netgear.

Is there a way of transferring data (music, movies etc) from an external hard drive directly to an iPad Mini?

Hi Guys,
Is there a way of transferring data (music, movies etc) from an external harddrive directly to an iPad Mini?
The reason I ask, is I'm going travelling and don't want to take my macbook with me - but I have a lot of music, movies etc that I want to take.
Is this possible?
Thanks, Fintan

Thanks all.
I've just come across Hyper Drive Cloud FTP - which allows you to connect any external harddrive or USB stick via WiFi.
Looks like a pretty good option.
I've also read that you can use GoodReader app to download files from harddrive to iPad.
Good review on Wired - http://www.wired.com/reviews/2012/07/cloudftp/
Product site - http://www.hypershop.com/iUSBport-by-HyperDrive-formerly-CloudFTP-s/218.htm
Let me know what you think?!

HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

@ melfromvictoria
Have you tried right clicking on the 4s and select "restore from back up"

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Transfering data through WiFi or GSM

Similar Messages

Maybe you are looking for