Transfering fcp 5 multiple audio tracks to soundtrack pro/ and 3 other ????

1. i wonder how to import multiple tracks from fcp 5 to stp and maintain these tracks in the multitrack format, not mixed down to two tracks.
2. i can't open a multitrack stp project i created in fce hd, into stp with fcp 5. i get the message, can't fine file??? when i click the file from the scratch drive, i also get the message that i need the apg ATI 9800 graphic card i used in my g4 with final cut express hd, but now i updated to g56 mac duel pro. do i have to att the ati card to my g5? and use this card instead of the g5 graphic card?
or can i use both the ati card with the gr graphic card, since i think that two graphic cards can be added to the g5?
3. i have a waveform file in stp that was made with final cut express hd, now i cant convert it to multi track, and i want to keep it since i filtered out background noise. how can i export it to fip 5 and reimport in into stp?
4. im a little bit confused about the mixer in fcp vs the mixer in stp. which is better to even out the sound from one sequence to another. also, to mix for tv sound, ( - 12 db), how do i do that with accuracy since the waveform varies... and jumps around from say - 15 db to -8 db? how does one find the average with consistancies, if possible.
i new to all this and would appreciate any help. thanks for any help any one can give me. ron hansing.

First up, learning STP is a great thing to do. You'll handle audio much better with it. Apple Pro Training Series, SoundTack Pro, by Mary Plummer, is the best way to learn it.
Back to your question. I did a basic tutorial that may help. It won't be out until December, but if you email me off board I'll send you an advanced copy of it. Shows how the work flow for editing multitrack sound from FCP into STP works. A bit to get into here, but it'll be a great start for you.

Similar Messages

Multiple Audio tracks in Premire Pro

I have an interview that is done and now I'm trying to clean up the background noise in Soundbooth. I've done a good job cleaning it up but now how do I apply that same series of effects to multiple audio tracks in the same sequence? I'm currently just right clicking on the audio of the clip and selecting edit in Soundbooth>render and replace. But I have so many clips in my sequence it would take forever to do each one.
Is there a work around for this?
Thanks -

This may not be the only way, or best way, but if you have a bunch of clips in a row that all need the same treatment, you could export your Work Area as a .wav file, import and drop into timeline, then do the Soundbooth business on the new clip all at once.
Jeff

Premiere pro: multiple audio tracks in a single take. (Workflow for audio mixing outside premiere)

Hi I am an editor from Finland.
I need to sync multiple audio tracks (like 2 stereo and 4 mono) to different takes before i start to edit. You see, after the editing I will create an OMF file for the sound editor who needs all the audio tracks to work with. I have noticed however by just nesting (puttin video and audio clips in a single sequence) the resulting sequence placed on in the main sequence is flattened into stereo (not multichannel). You see my problem here? I am surprised, because i have always taught that this is a very normal workflow and so far i haven't found a single tutorial or a guide for this problem.
Just to make sure we're on the same page: I know how to sync video and audio, just not so that the 6different audio tracks in all my 120 different takes that i edit into a single sequence will have the 6different audio tracks in the audio post production (which is done in protools, maybe...)
Oh yeah, Premiere Pro CS5

Hi!
This is the case when i get a master clip with all the audio tracks in it. I however got separate files, a bunch of different video files (with stereo track), for every take a boom mic audio track, and a few tracks for all the microphones on the actors. Now after i import these into premiere, how will i proceed so that after i have synced all the audioclips to all the video clips (by nesting?) I will still have all the audio clips intact in the OMF file I will create.
Last time i created omf, all the clips had turned into stereo because of nesting. Is the only way to avoid this by joining the video and audio clips into multichannel audio clips with another program before importing into premiere?
I am not very good at explaining... Problem: I get a video and 10 audio tracks. I join them by putting them into a sequence. I repeat this about a hundred times (for every take). Now i start to edit. I create the main sequence in which i clip pieces from all the hundred takes. In the main sequence the clips have only one stereo track. When the movie is finished I create an OMF for the sound guy. The sound guy asks me why are there only 2 tracks per clip? Where are all the 10 separate audio tracks?

Video with Multiple Audio Tracks-- IOS 4.2 Removes Way to Select Them

After upgrading to IOS 4.2 on my iPhone 4, I've found it no longer lets me select from among multiple audio tracks. The option and button is completely gone.
I encode my videos with AC3 audio as the first track (for my home media devices), and stereo audio as the second track (for the iPhone). Now the iPhone will just play the video, with no audio, and no way to select another track. This is extremely frustrating as I've encoded all my DVDs this way, and never had any issue with playback like this on any IOS device going back to the first gen iPod Touch.
Anyone else have this issue, and know of a work around? Thanks!

I too have the exact same problem for the exact same reason. Did you ever figure out a workaround (other than reencoding all your videos)?

No audio on files with multiple audio tracks

All my files that have multiple audio tracks (e.g. stereo and surround) no longer have audio when I initially start up my Apple TV 2. When I manually change the audio track in the menu (from stereo to surround or vice versa), I get the sound back but I would have to do this with every single file and do this each time I start up my Apple TV. Anyone else notice this problem. This only started happening after the most recent update.

Hi,
AC'97 Audio for Vista/Win7 here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Best workflow for editing Logic Pro 8 regions/tracks in Soundtrack Pro?

I've searched for a solution for the below question in several forums and to no avail. Thanks in advance for any help!
What is the easiest workflow for editing Logic Pro 8 audio files with Soundtrack Pro 2? And I'm thinking of a process very similar to the Final Cut Pro timeline audio-to- Soundtrack Pro Audio File project workflow.
I'd imagine that a good amount of the time, I'd be editing regions rather than full audio files -- as in, once in a while, while mixing sessions that another engineer has tracked, I'll hear clicks and pops from pre-amps clipping; or I'll hear an air conditioner blower running or something.
Basically, I occasionally hear noise in the arrange window while mixing that I'd like to edit out with Soundtrack Pro, and I need to know the easiest way to send that audio clip to Soundtrack Pro and then back to Final Cut Pro.

Connecting your FS Mobile to powered speakers will not increase latency. Latency is simply the fixed amount of time it takes for your computer to process sounds. Once the sound is processed and available at the outputs of the FS Mobile, it can go anywhere; to a PA mixer, a separate monitor mixer, headphones, etc. One thing you will want to consider when playing live is to have a personal monitor very close to you and pretty loud. The reason being is that the physical distance between you and the main PA speakers will itself induce a type of latency since sound travels at about 1126 ft/sec or 1000 msec of delay for every 1126 feet. Adding this delay to your latency could make holding a groove or pitch for that matter nearly impossible. The delays add up pretty quickly. For example, if your speakers are say 50 feet away from you, you would likely have around 20 msec of delay right there. Add this to your system latency of 20 msec and your up to 40 msec which is like trying to play a rubber guitar underwater. Even if your PA speakers are closer, the delays add up quickly. So having that nice loud monitor right up next to you will insure that you only have to get the feel of your system latency.

Working with multiple audio tracks

Hello,
I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
BTW I'm working in FCP 7.
Thanks,
Thien

One way:
Lock the video track.
Use the Edit Selection Tool to Select the audio transition points
This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
which gives me the displacement of all the tracks that I wanted:
You can use this quite quickly once you get used to it.
MtD

Question about multiple audio tracks

Hello,
I see that imovie has only 2 audio tracks available when creating a movie. I need more than two since I will be working with a voiceover track, a soundtrack and at least one background/environment track all at one time. I won't be able to use the sound recorded with the video so that "track" is not an option.
My question is; Am I out of luck here and need to spend the 1K for studio pro to add more multiple audio tracks?
Also, I tried working with garageband but since all of my audio tracks import in at a minimum of 40 beats per minute, the voiceovers are all sped up and sound chipmunky.
Thanks for any help!

Well I didn't mean to irritate you...LOL And yes, I realize that this is the iM 6 forum but the gist of my question was related to multiple audio tracks in iM and thought I would ask about it in the forum pertaining to the latest release.
I had already posted a question in the GB forum regarding the bpm problem and found no answers so I was pretty much about to shelve that idea and forgo the whole garageband thing; this without knowing about the new "swap" features. I just updated to iM 6 yesterday.
As far as the "on-tape" raw audios: I was working on my movie in iM4. I wanted to add more audio bits but I don't have a proper mic for my G5 so I recorded the audio bits on dv8 tape through my camcorder. I imported the video (the image was the inside of my lens cap!), extracted the audio, took those audio files and imported them into GarageBand. That's when I noticed the bpm problem.
I'm sorry about the lack of info I originally gave but like I said, I had pretty much gave up on the idea of using GarageBand. I'm pretty new at this and I'm trying to decide what I need in terms of software to get what I want out of my movie. I'd be willing to pay for FCxp but still looking into whether I need to do just that or whether I can get by by using imovie and now it looks like GarageBand too.
ah, thanks for that
what irritates me, Prince wrote:
The audio tracks were voiceovers that came from my
dv8tape, imported into imovie4.
... ehm, but this is the iM 6(six) section, as said,
iM 6 allows now "swapping" files with GB3... (I'm way
back in the 90ies.... see my specs... )
so, video is in some iM, and he wants to use the
actual "on-tape" raw audios...
I thnik we need a little more detail...

Export to Quicktime with multiple Audio Tracks?

Hi all --
I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
Can anyone help?
Thanks!

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Any way to export QuickTime w/ multiple audio tracks?

I remember seeing QuickTime movies where on playback you can select which audio tracks to listen to. Kind of like director's commentary or different language versions for the same video stream...
Is there a how-to guide for making a movie like this in FCP? We have one video file and multiple audio files that we've placed in different tracks in the timeline but when we export to a QuickTime movie they get all merged together. We tried setting it up with multiple audio channels and then control-clicking to get that menu with each audio track and putting them into the different channels, but there must be something we're missing...
Is this something only FCP 6 can do? I think we have version 5.
thanks!

I'm a little rusty on this - and without access to FCP 5 at the immediate moment - but I think the key is to set your sequence to have multiple (as in more than 2) audio outputs, then select Channel-Grouped for audio during the Export via QT Conversion.
If that doesn't work, you could always paste additional audio tracks onto your movie in QT Pro. After all, you'll need to tweak your language settings for audio track in QT Pro.
But where have you seen this implemented to do a Director's commentary-type option? I've read that multiple (discrete) audio tracks work only if they're tagged as different languages and the user's playback system is setup for one of those languages. (But I've been wrong before...)
And welcome to the forums.

Multiple Audio Tracks

Hey guys,
My main profession is a composer, although I'm quite comfortable with various video tools as well and have done video production and post professionally for some time.
often when I compose a piece for a trailer or something, I might have a couple of different versions, or at least a couple of different mixes to A-B on various systems, and show the client.
Is there a way to have a quick time movie with multiple audio tracks? so that I would be able to switch from track A, to B, to C , etc...?
I know how to do this for DVD authoring, but I was wondering if there is a way to do this for web and/or other formats, so that I can put the video on my iphone, or ipad and be able to plug it in and show the client option A, B, C, etc... or at least upload a video online and the client can choose the various audio tracks.
any help would be much appreciated.
thanks
David

Whilst FCP can create QuickTime movies with up to 24 audio tracks (so you could easily have a single video with 12 different stereo mixes) I don't know of any way to actually handle choosing which tracks to monitor other than by doing so directly in the Movie Properties window inside of the QuickTime Player app or similar ... but I'm not a web code monkey so it may possible nonetheless, hopefully some clever clogs will pop by and educate us
Best
Andy

Multiple audio tracks playout from FCPX.

Hi, How do i handle multiple audio tracks to play directly from FCPX. Previous versions of FCP gave the freedom of assigning an audio pair to an sdi pair.

Aside from the possible legal ramifications of what you are doing with other people's copyrighted property, some of the trailers are obviously plain old stereo while others are Dolby 5:1 Surround.
Message was edited by: Nick Holmes -spelling

How do I import multiple audio tracks?

Hi there...
I have a number of video files that have multiple audio tracks in them. The problem is I can not work out how to get prem to see multiple audio tracks. The files import fine and I have also tried various other formates with multi-track audio.. but only audio "stream 1" is visible in prem.
What I was hoping is that the video would come in with a 2 audio tracks instead of 1 each in its own "lane".. so I can then use the mixer and the audio files are linked to the video file and in perfect sync.. (just like when you import with 1 track)
NOTE: I am not talking about channels.. but complete 2 completely different audio tracks.. and I know that I could extract these audio streams into wavs and then re-sync them but this seams overkill and a duplication of effort... surly there is a way to have prem support more than 1 audio track on a video file?
--Me

Well, if PP doesn't bring them in, then best guess is they just don't exist.
There's really no trick or user adjustment for this that I'm aware of. You import the file, PP sees what's in it. I've never observed or read about any other behavior than that.

Is it possible to retain multiple audio tracks when exporting?

While ripping my DVD collection, I've wanted to add a purchased RiffTrax (see www.riftrax.com) to the movie as another audio track. I've been successful, but it took the following steps:
1. Encode the movie using Handbrake, open the resulting m4v file in Quicktime Pro
2. Also in Quicktime Pro, open the Rifftrax aac file I created and add it as another audio track in the m4v
3. Save the m4v as a Quicktime mov file
4. Use Handbrake again to encode the mov file into an m4v file, including my added audio track
The reason I have to do step 4 is because if I were to export an m4v file directly from Quicktime Pro, it would compress all of the audio tracks into a single audio track. It would save a lot of time if Quicktime could export multiple audio tracks, at least when exporting to formats that can handle them. Does anyone know if this is possible?
BTW, if anyone wants more details into how I create the RiffTrax aac, just ask.
- Jake

I've answered my own question, it was a lot easier than I thought. After the first encoding by Handbrake, there's really no difference between calling it a mov file or m4v file. I can change the file extension at will and there's no need to do an export that mashes the audio tracks. It's only AppleTV that needs to see the m4v file extension, Quicktime and iTunes doesn't seem to care one way or the other.
Thanks for letting me think out loud.
Jake

How to play multiple audio tracks simultaneously?

Hi there,
I am having problem with playing multiple audio tracks. I want to play 2 or more audio tracks at exact time (without delay) - is it possible? how can it be done?

So, essentially, you're trying to take a recording of say, a singer and a guitar player, and end up with the singer in one file and the guitar in the other. Got it.
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Merge.html]
That sample will merge multiple input files into a single file. Because you want to play the files together rather than save them, just take the sample and strip out all of the DataSink stuff, and add the following line right after the Processor "outputProcessor" is realized...
outputProcessor.setContentDescriptor(null);
So, it'll make the following revision to the code:
     // Create the output processor
     ProcessorModel outputPM = new MyPMOut(merger);
     try {
         outputProcessor = Manager.createRealizedProcessor(outputPM);
                    outputProcessor.setContentDescriptor(null);
         outputDataSource = outputProcessor.getDataOutput();
     } catch (Exception exc) {
         System.err.println("Failed to create output processor: " + exc);
         System.exit(-1);
     }That'll make the outputProcessor play the file, as if it was a Player object. You won't have any visual controls, but if you need visual controls, then don't do that, and just create a Player object to play the outputDataSource.

Transfering fcp 5 multiple audio tracks to soundtrack pro/ and 3 other ????

Similar Messages

Maybe you are looking for