Transfering files using drag and drop to Nano P

I havent installed the supplied disks that came with my Nano Plus but am transfering files using drag and drop from "my music" folder on my computer to the Nano. These files are stored on my computer as the Name of the Artist as the folder name with a sub folder named the CD title (default setting when using Windows media to rip) with the individual track files in that folder.
When I drag the main folder over to my Nano it just displays the Album title on the screen but not by artist and there is no way to select by artist (you can just switch "folders" on the Nano which will then display the CD title. If I used the supplied software with my Nano to transfer the files will I be able to choose by artist, CD, Genre, etc or is this not a function of the Nano?
Is it best to just select the individual song tracks and throw them in one large group on the Nano and then it can figure out which artist, album, genre they belong to?

The player will only show directories that contain music files.
The behaviour you want is common on players that manage their content with a database (typically HD-based devices), but Creative's flash players don't work that way (and the software used on the host computer doesn't have any influence on this - the user interface is controlled by the player's firmware).

Similar Messages

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

Start Workflow when Upload File using drag and drop

Hi,
I am working with SharePoint 2013.
I have a workflow needed to be started and run only once after a document is uploaded into the document library. The document library has
required custom columns with default values. If I set workflow starting option as 'On Created', when user got redirected to the edit form and click 'Save', there would be error as
"The <filename> has been modified by <user> on <datetime>". Besides the unwanted error dialog, the metadata entered by users are not reflected. I understand the issue is because the workflow had already started before
the edit form showed and it modified the file.
So I changed the starting option to 'On Changed", created an additional column to record if the workflow has been run or not to avoid running the whole workflow more than once. This works fine for normal upload. However on drag and drop, the
event 'On Changed' is not triggered and the workflow is not started. I checked the version of the file but in both normal upload and drag and drop, there is another version after the first version. But
only the version of normal upload triggers the workflow.
I read an article about some Mode = Upload on the edit form.
https://go4answers.webhost4life.com/Example/workflow-triggered-during-upload-user-149297.aspx
It seems that the Mode = Upload is not there anymore for normal upload, but it's still there for drag and drop. Not sure about this
Is there a solution for my case. Basically I want to start the workflow only once when the document is uploaded normally or via drag and drop. For normal upload, user can
edit the custom metadata right after they browse the file. For drag and drop, the
metadata will be set as default values.
Thank you.

I'm still researching your issue, but as an interesting note... This is an issue only when I use a 2013 style workflow. I do not get the error when using a 2010 style workflow.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Problem Copying Files using Drag and Drop in Finder

When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
I'd love to hear whats going on here!
Ted

tedpratt wrote:
When I try to copy files from a camera's SD disk into a folder in Finder, it always seems to copy the files to some other location other than the folder I drag and dropped to. And then, when I try to redo the drag and drop, I get a message that these files already exist in the desired folder, even though I don't see them there!
What Finder "view" option are you using, List, Icons, Columns, or Cover Flow, for this question and the one below? Are you dragging those photos onto the icon of a closed folder or somewhere else? Please describe the exact process that you're executing.
Also when I create a new folder in Finder, it never places the new folder under the folder I've currently highlighted.
When you say "under", do you mean "within"? A new folder will be placed in the folder that's open.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.

You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too.

Using drag and drop property in forms.

Hi all,
I want to use drag and drop property in a form during
runtime.I am using oracle 7.3.I don't want to call any
another application.
Is there any way?
Thx in advance.

Mona ! First tell your problem in brief ..Actually what you want
on runtime ...would you like to fetching the data from one item
to another or change the position of any item or
pushbutton ...or what..give detail ...obviously i can help you..
there are many commands like set_item_property ,
get_item_property but right now i could not understand your
prob ..tell me in brief..
You can ask me at [email protected]..
-Anwar

How do i drag indicator control type on WPF instead of using Drag and Drop points

In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.

Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Images resizing when using drag and drop

We just recently got PS Elements 7. I have a blank image that is sized at 600 x 1662 pixels. When I want to put a photo into that blank, I make sure that the photo is 600 pixels high. With 6, what I used drag and drop from the bin, the photo fit perfectly. With 7 it is apparently resizing the photo and I have to stretch it to fit. Is this something that I have set wrong? If I am making sure that both items should fit together based on number of pixels, why is one changing size? Something has to be changing size or the items would fit together. I am assuming that something is set wrong, because this just does not strike me a something that should happen, or the program is not a very efficient photo editor. If necessary I will go back to 5.0, although there are things that I like better in 7.
jean @ buffaloworks

I'm frankly surprised you had success with this in PSE 6, since the past two versions create a special kind of smart object from images dragged up from the bin. You can use copy/paste to create a regular layer, or you can drag down to a thumbnail in the bin from an open image, but the project bin doesn't let you drag up anymore, by design.
Did you mean to say PSE 5 rather than 6? It worked normally there.

Programatic Generation and positioning of components using Drag and Drop

Hi,
I am relatively new to ADF and UI Designing. Im trying to generate a flowchart using drag and drop feature in ADF. This involves creation of dragging images such as start,decision .. etc from one panel to another and dynamically creating a flowchart.
Up to now i have managed to drag images from panel1 to panel2 and create them dynamically in the bean class. However im stuck at this point .. Im not able to position the draggable components on the desired position in the panelGroup. They either appear horizontally or vertically.
Is there any way to achieve this. Also is it possible to assign a dropTarget to a a target component which is created dynamically ?
Thanks in anticipation ....
Lyle

Hi Lyle,
I am too only 4 months old to adf ,i use jdeveloper 10g.
In 10g for the components to be placed at desired locations i think is somewhat possible. While you can arrange them by using spaces which causes
f:verbatim tag to appear or you can use ADF Faces Core items like Object Spacer and Object Seperator where you can set their length and width to space objects on page...
Regards
Rohit

Mail doesn't attach files through dragging and dropping the files!

Help please,
Mail doesn't attach files through dragging and dropping the files on OS X ML, it crashes for a while !!

Open Disk Utility and Repair disk permissions on the First Aid tab.
Then, Restart and boot into Recovery Mode by holding down cmd-r on restart until you see a gray screen. When the Mac boots, you will be presented with some options. Choose Disk Utility and select your Hard drive volume (Macintosh HD is the default name). Then, on the First Aid tab, click Repair Disk (not permissions).
If that doesn't help, you could try installing the 10.8.2 combo updater from the Apple Downloads site:
http://support.apple.com/kb/DL1581

Visual Studio opening files when dragged and dropped in WPF app debugging session

I'm working on a WPF app (using VS2013 CE) which is intended to manage media files (TV Shows, movies, etc) and as part of this I am enabling the user to drag and drop media files on to the running app (by adding AllowDrop="True" and PreviewDragEnter="Window_PreviewDragEnter"
to my Window definition).
The problem I have is that when I drag files onto the app in a debugging session Visual Studio then opens the file(s) when I stop debugging... this is seriously annoying as when I am testing with large media files (> 1GB) it just locks up VS for minutes
at a time while it tries to open the file or files. When I run the app outside the debugger this does not happen - it's only when I'm in a VS debugging session. The only way I can stop this happening is to kill VS completely from Task Manager then restart
it - this is also very annoying but often I need to do this as it will freeze up for 5-10 minutes while it insists on loading the files in VS.
I understand the app, whilst debugging, is running in the context of VS but why does VS then have to try to open the files when debugging is finished? I have looked through the options but can't see anything to switch this off and no amount of searching
has turned up anything - can anyone put me out of my misery with a solution to this annoying issue?

Hello nzmike,
Does Visual Studio behaves like the following image shows and just hangs when opening your media file?
Do you have any other computer which installs Visual Studio? Can you reproduce this on it?
In order to troubleshoot this issue I think we need to locate the root reason of your issue. The problem can related to the following:
1. Your project is corrupt and VS then trys to load that file when debug finished.
2. Your VS is corrupt and caused this problem.
So please do something below:
1. Try clean and rebuild your project.
2. Switch to some other PCs and use VS and your project there, check if the problem can be reproduced.
3. You can backup your VS setting and try some commands: devenv /resetsettings and devenv /resetuserdata
Details about VS command:https://msdn.microsoft.com/en-us/library/xee0c8y7.aspx
And based on th research of the above second step, if you can reproduce this issue on more than one PC, the problem is pending on your project and I need you to share a simple sample which can reproduce this issue. We will need to investigate the project
in detail.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to upload a file with Drag and Drop and http

Hello,
I am trying to upload a file through the web interface (Netscape 4.7 and IE 5.0). When I click un upload, Via Drag and Drop, a new window is started, but never completes.
With Netscape, I get a message box: Netscape is unable to locate the server null. Please check the server name and try again.
With IE 5, I get an error: This page can not be displayed.
Are there any files I need to edit on the PC side to get this to work?
Thanks
Scott
PS I think you guys are doing a great job with support on iFS.

WebUI Drag & Drop requires FTP to be running and available.
Drag & Drop is really just uses the browser built in FTP ability.

Using drag and drop in remote desktop on windows server 2008

we running an application on windows server 2008 terminal services .. this application was support drag and drop functionality .. i understand that terminal services on windows 2008 is supported to drag and drop but is not happening !! even when i run remote desktop connection on this server the drag and the drop is not working !
i need to enable the drag and drop for windows 2008 terminal services ..
Thanks in advance

Hello Ayman,
If your requirement is to drag and drop files between local and remote sessions, Danny is right. Drag-and-drop feature is not supported in Windows Server 2008-based Terminal Server, which is a by-design behavior hard-coded in the current version of the Remote Desktop Protocol.
As a workaround, I recommend you to use copy-and-paste function instead of drag-and-drop. To enable the copy-and-paste between local and remote session, please enable the clipboard redirection in Windows Server 2008-based RDC. (In Windows Server 2003 environment, local drive redirection is needed.)
Hope it helps. Thanks.
Best Regards,
Lionel Chen

Is it possible to combine pdfs from software containing the file by dragging and dropping them?

We have a piece of software that we profile PDF files into it and then have a need to combine those PDFs into one file. Is it possible to just drag and drop from the software into the combine files area? I know if you open the files first, you can do that or if you save the documents locally, then you can combine them. It would be ideal to just select the files in the software, then drag and drop them into the combine pdf window. We are using Adobe Pro XI.

Hi Hawk2000,
The workflow you are talking about is very much possible with Acrobat and a good example is Microsoft Outlook from which we can select multiple e-mails and simply drag into Acrobat combine dialog box for combining.
What happens when you drag files from you software? Is it public software?
Can we test your software?
Regards,
Anoop

Unable to use "drag and drop function" from outlook

We are changing from Lotus to outlook and this has made a problem with getting pdf-files into OAWD directly .
Procedure was like this in Lotus
1. We get documents (FI, F-43, aso ) by email
2. We use OAWD function "drag and drop" , document is attached to a document type and workflow is triggered
3. We pick up documents from Business workplace , handle the document and send it to the approver (who earlier got it directly in their mailbox "lotus")
so far so good , everything worked well
Unfortunately we changed to outlook, non attached files can be "drag and dropped" into OAWD (I understand the part about outlook is showing links instead of "real" pdf and know this is part of the problem)
My question, it can not be possible that we have to manually save the documents/attached files from outlook into "desktop" to later use the drag and drop function?
I have read about the programms to solve problem , ex "inPuncto", but our experts says there will be problem with connector to workflow from OAWD.
I have my greatest doubts about that because this must be really two diffrent moduls, one for converting from outlook and the other must be unchange (undependent of the earlier procedure). SAP can not know from what program the documents will be dragged?
Suggestion about some OAWD-adaptor ?
Any suggestions about great solutions ?

it seems there is no way.
See note 1797073
Is there someone with a better solution?

Transfering files using drag and drop to Nano P

Similar Messages

Maybe you are looking for