Transfering from wireless harddrive to new wireless harddrive

I have my music on a harddrive plugged into a USB hub on my airport extreme. I have now upgraded my harddrive, so i need to transfer the music over to a new harddrive that will replace the old.
Any suggestions on the best way to go abouts this? (about 40gigs)
Also, has anyone had problems using the front row with music streaming wirelessly? It doesn't seem to work.

The nice thing about USB is that USB storage devices are VERY standardized and have been for years. They will work with any OS that supports USB storage devices, which is basically anything since Windows 98 for Windows, anything since the original iMac (maybe earlier?) for Macs, etc.
Windows 95 could have USB support added, but it was kind of a pain.
The only compatibility issue is that sometimes the host operating system doesn't understand the filesystem the drive was formatted with. However, Windows has been consistently backwards compatible with previous filesystems supported by Windows, i.e. W7 will read and write all FAT variants and older NTFS variants.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Similar Messages

Getting data transfered from old HD to new ones, leaving 2 slots filled . .

Hello,
*(Below is a thread I started in another forum, but, didn't get my final questions answered (see at bottom of this post in BOLD), and am hoping for further help and suggestions. I know there is a lot to read here, but, I think this information will help other novices, such as myself. Thanks!)*
I have 2 new HDs (each 1T) uninstalled, and I have my old HD (160 gigs) currently residing in one of the two slots in my G5. Any ideas on the best way/process to get the data transfered from the old HD to the new ones, leaving my two slots filled with the 2 new drives AND my data from the old HD transfered and intact, with a RAID0 setup?
OR, are there any other suggestions on a good setup with the 2 new HDs??
I'm open to suggestions.
I always back-up on external HDs, so, is their a need for me to worry about setting up a RAID0??
I'm doing video processing for DVD release.
Should I just max out the 2x1T gig HDs and not worry about a HD failure??
All Suggestions welcomed!!
Thanks, Jack
*FROM THE CUTTERMAN:*
You are limited with only 2 drive slots. In this scenario what usually works best is a small fast drive (eg Velocirapter or SSD) for OSX/Applications and a large drive for video files. It is not advisable to have the operating system running from a striped array.
Since you already have the drives, here is what you can do.
Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions. Be sure that it is GPT-formatted so it can boot.
Use CarbonCopy Cloner to copy your current OSX partition to the new one.
Set the startup disk as the new partition.
Remove the old drive and replace it with the second new one.
Reboot, and partition/format new drive.
*Hey Cutterman,*
Thanks for the advice. That sounds like a good set-up. I'll have to research the process of doing what you've advised, but, should work out ok:
A. Install one new drive and format the partition you wish to use for OSX. You may not want to use the whole drive for OSX, so make 2 partitions:
1. Partitions are done under Disc Utilities correct? Never done it before; will take a look.
B. Be sure that it is GPT-formatted so it can boot.
2. GPT is also done under Disc Utilities, correct? Here I start to get a bit confused, as I've formatted Extended Journal, SO, the partition with the OSX & Applications is formatted GPT, and the rest of the HD is formatted as Extended Journal?
C. Use CarbonCopy Cloner to copy your current OSX partition to the new one.
3. So, I partition the first new HD and use Carbon Copy Cloner (also under Disc Utilities) to copy the OSX & Applications from my original HD to the first new HD, correct?
D. Set the startup disk as the new partition.
4. This will be an option when I setup the partition???
E. Remove the old drive and replace it with the second new one.
F. Reboot, and partition/format new drive.
5. QUESTION: So, you recommend not striping the HDs: If I do a RAID 1, which sets up a mirror of the HDs, and since the first new HD is partitioned with the OSX & Applications, AND is set up as the Startup Disk, then the second new HD will also mirror that?? Another QUESTION: Even if the second new HD does not mirror the OSX & Applications, the second HD will only mirror the space/partition not utilized by the OSX & Applications partition, correct?
Thanks for your help!!
Jack
*FROM THE CUTTERMAN:*
OK I will try to answer your questions. To begin, if you want to mirror the 2 drives then you will need to boot from the SL install DVD or an external (USB/firewire) drive to set it up. IMO for your purposes it is too much hassle and a waste of HD space.
1) Yes partitions are created in Disk Utility
2) Yes, you choose a volume Scheme (ie number of partitions) and size them by dragging the separator bar. Then select the planned boot partition and click Options..., then choose GPT. I think it is usually the default but check and make sure. Extended journaled is the usual format.
3) You need to download Carbon Copy. It is a free tool that will copy the entire image of your current system partition to the new one and make it bootable. Consider making a donation as it is a very useful and frequently updated utility. It is fairly intuitive to use. You can also use the restore feature in Disk Utility but I have had more experience with Carbon Copy.
4) Once the copy process is finished the new boot partition will show up under the startup disk selections (this tool is in System Preferences).
*FROM 666Sheep:*
If may i correct one thing: OP, don't choose GPT (GUID Partition Table). You got PPC Mac (G5), so valid partition type for you is Apple Partition Map (APM).
GPT is for Intel Macs and you will not able to boot from this kind of partition.
*FROM THE CUTTERMAN:*
Thanks for the correction- my bad. No familiarity with non-Intel Macs.
G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD
*Hi All,*
*Since this process will come to a head on Tuesday/Wednesday, and I hope to be successful in transferring Old HD data to new HD/s.*
*A: I'm still a little foggy here, as I thought I'd set up the 2 new T-gig HDs so that if one of them failed, I'd still have the data backed up on the other HD; more ideas concerning this would be reassuring:*
*WHAT DOES "IMO" mean?*
*(IMO for your purposes it is too much hassle and a waste of HD space.)*
*As I understand the points made: After I partition the first new HD, and Carbon Copy data from old HD, I then install second new HD, and this will just act as an overflow from the first partitioned HD, correct? Because, if set up a Raid1/Mirror, the OSX partitioned portion of the first new HD will not copy to the second new HD, and that space on the second new HD will be wasted, correct?*
*Also: I have to set up RAID1 (if I do not set up RAID0), correct?*
*RAID 1*
*From WIKI: RAID 1 mirrors the contents of the disks, making a form of 1:1 ratio real time mirroring. The contents of each disk in the array are identical to that of every other disk in the array. A RAID 1 array requires a minimum of two drives.*
*Carbon Copy is a free tool that will copy the entire image of your current system partition to the new one and make it bootable.*
*1. Is my old HD partitioned? Is that done automatically by MAC prior to PC purchase?*
*2. Do I Carbon Copy the whole old HD or just parts? (eg. OSX, Photo Shop, After Effects, Various Files)*
*3. I read that it is necessary to DEACTIVATE Photo Shop (I have CS3) prior to doing Carbon Copy. Is that correct? If so, does this also apply to other Adobe applications? Such as After Affects, Illustrator??*
*Thanks to all for the help!!*
*G5 PowerMac, 2.5 GHz Dual, Dec. 2004, 6.5 GB RAM, 149 GB HD*

Confusing Information:
A1: You also want to make sure the drive you are backing up to is formatted Mac HFS Extended (HFS+) if using Mac OS 8.1 or above.
A2: On PowerPC Macs, your clone should be partitioned as Apple Partition Map.
*Q? I thought the new HD (1T) should be formatted in Extended Journaled?*
B: Also disable Spotlight (in 10.4 only) on your destination drive using Apple menu -> System Preferences -> Spotlight -> Privacy to add the destination drive to the pane.
*Q? I'm using 10.4.11, so, I should follow these instructions?*
C: If possible, boot into safe mode to perform the backup (holding the SHIFT key at startup). In addition, you can clone while logged into another administrative user that you don't use at all to avoid further complications of changes which may be happening to your regular user (though don't use Fast User Switching to get into that other user, since that other user is still active when fast user switching is used). Otherwise you are going to be running a backup on a live system which could have changes happening while you are attempting to backup. These may yield an imperfect clone, with uncertain success at recovery. It may be possible that your clone will have its own hardware issues, so make at least two copies.
*Q? ?????????????*
*I GOT THE ABOVE INFO. FROM THE FOLLOWING SITE:*
Making a clone/mirror/duplicate backup
http://www.macmaps.com/backup.html#SHORTANDEASY
*ALSO, WHAT DO YOU THINK ABOUT THE ADVICE ON THIS PAGE:*
http://www.levoltz.com/2010/04/21/how-to-transfer-data-to-your-new-hard-drive/

Transferring from old itunes to new

hi - i have an old version of itunes on my PC laptop and am getting a MacBook with the latest version. I want to transfer all my tunes from old itunes to new one - is this possible? my old PC laptop cannot access internet so i can't upgrade it. are old itunes compatible on the 7.6 version?
cheers

How big is your library?
Do you have an iPod or an external hard drive?
How to use your iPod to move your music to a new computer using iTunes7
http://docs.info.apple.com/article.html?artnum=300173
How to use your iPod to move your music to a new computer using iTunes6
http://docs.info.apple.com/article.html?artnum=304304
Patrick

TS3682 apps not transferring from old iPhone to new one

does anyone know why im not able to sync my apps from old iPhone to new one through itunes?

the apps also need to be downloaded into itunes have you checked that?

Fonts- transferring from old Mac to new Mac

I used FontDoctor to check and collect all my fonts from my old MBP and copied them to my new MBP OSX-10.6.4.
But I don't want to install duplicates or older versions of fonts over newer ones. Will FontBook refrain from adding dups, prefer newer fonts to older, and prefer OT over TT over PS fonts. If so, how do I get FontBook to extract from my copied font collection only the appropriate fonts for installation.
If not what font managers will do that.

Will FontBook refrain from adding dups, prefer newer fonts to older, and prefer OT over TT over PS fonts.
No to both. It will let you install anything and then tell you after the fact you have duplicates (conflicts). It will not prefer any font type over another. About the only thing it does on that front is to try and keep conflicting fonts from overriding any system fonts of the same name. But it doesn't always succeed at that, either.
If so, how do I get FontBook to extract from my copied font collection only the appropriate fonts for installation.
You can't. Until it sees the internal names of the fonts you want to activate, it can't know if there will be a conflict.
If not what font managers will do that.
Suitcase Fusion 2 and FontExplorer X Pro are much better for that. As with Font Book, they can't know there will be a conflict until you activate fonts that do. But they are much better as to how they respond to it. Font Book just lets them conflict and then marks them. You have to decide what to do from there.
Suitcase has preferences that will one; tell you when there is a conflict. And then the overall choice of either activating the requested font (automatically turning off the conflicting font), or keeping the current font active (not activating the font you were trying to turn on). FEX Pro will notify you when there are conflicts and present the same choices; leave the fonts on that are already active, or turn them off and activate the new ones. You can do them one at a time, or apply to all instances.

WRT610N disconnects when transfering from wireless client to wired client

based on reviews, I purchased a WRT610N.
Have it setup with wireless N to work with my two laptops, and also have a desktop connected to one of the gig ports.
Whenever I try to transfer any files (or access the desktop) from any of the wireless clients, the wireless radio part of the router seem to reboot itself every 5 to 10 seconds.
If I go from a wireless client to another wireless client, it works fine. If I plug one of the laptops into one of the gig ports and transfer files to the desktop through the wired connection, it works fine. But as soon as either laptop try to access the desktop through the wireless connection, the radio goes into a reboot cycle until I stop trying to access the desktop.
Router has latest firmware. the two laptops has a Intel 5300 and intel 4965AGN card, both running windows 7, desktop is also running windows 7.
Used to be able to do this with a WRT150n without any issues, upgraded to the WRT610N for the gig port speed, but now this issue.
appreciate any assistance.

Ok I disabled IPV6 and now it will go about a minute of transferring files before the wireless dies.
AP Isolation is disabled.
Even tried from within the same room, direct line of sight from the laptop to the Router, about 5 to 7 feet away. Computer shows wireless signal at full strength.
I don't think it's the wireless cards in the laptops because I used the exact same setup with a WRT150N and WRT54GR and both work fine (although slower).
Just as a sanity check, I put the WRT150N back in last night and tested it, it would let me transfer files all night long without disconnecting.

Best Method of Transferring From Old Mac to New Mac

I've got a 27" iMac on order that's supposed to ship sometime in early January, and am wondering what is the best method of transferring everything from this Mac to the new one (once it arrives)?
As I understand it, there are essentially three ways of doing this:
Migration Assistant
Setup Assistant
Time Machine
I've got two user accounts on this Mac, and will need to transfer everything for both accounts. I have about 350GB worth of files, data, and applications to transfer.
Is one of the above methods better than the others for accomplishing this? Are there any "gotchas" I should be aware of before moving everything over?
Advice and assistance is welcomed.

The easiest method is to use Setup Assistant that automatically starts the first time you use a new Mac. It will offer you the opportunity to migrate all users or just those you select.
Mike Osborn wrote:
... Are there any "gotchas" I should be aware of before moving everything over?
If you do not use Setup Assistant, you can always use Migration Assistant later. However, this can easily become confusing if you already created a user account on the new Mac. Most people won't have the patience to use Setup Assistant and understandably want to use their new Mac right away. If you elect to do that, don't create an account with the same name as one you wish to migrate. Instead, create a user account that you plan to erase after you migrate your existing accounts. The reason is that if you create a brand new account named, for example, "Mike Osborn", you will be unable to migrate to another account with that name.
Use a wired connection. Wireless can take an unacceptable amount of time (days).
Don't create a brand new Apple ID either. Have your existing Apple ID and password ready and use it, so you don't make the mistake of creating an Apple ID with no pedigree.
Register your new Mac (and all your other Apple equipment, if you have not yet done so) using this link:
https://supportprofile.apple.com/
This provides for a convenient database of all your Apple equipment's serial numbers, service history, and warranty eligibility.

Transferring from old ipad to new

how do I transfer all my data from my ipad 2 to the new iPad Air?

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
How to Transfer App Data and Game Saves from One iOS Device to Another
http://lifehacker.com/5891964/can-i-transfer-app-data-and-game-saves-from-my-iph one-to-a-new-ipad
How to transfer data from your old iPad to your new iPad
http://www.imore.com/how-transfer-data-your-old-ipad-your-new-ipad-air-or-retina -ipad-mini
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
 Cheers, Tom

Transferring from old Mac to new Mac

Have just purchased an iMac and have transferred data from an old iMac and MacBook Pro so I now have two accounts on my new computer. Can I merge the two accounts and if so, how? Can I have both accounts open at the same time? Preference is to merge in to one.
Adam Birchall

Sounds like you are doing fine. However, there is a bit of a difference between what you describe and what the original topic poster wanted to do. The original question was about how to merge two accounts that are already on the new computer into one account. That's why I suggested using the Shared folder. Your question is about how to transfer from an external drive (the Time Machine backup) to your new MacBook's internal drive; that's different, and you do not need to use the Shared folder. You should be able to transfer the files directly from the external drive to the appropriate location on in your +user home folder+, not the Shared folder.
Also, if you don't want to do it manually using Finder, there is a utility called Migration Assistant, in Applications/Utilities. You can use it to transfer user data from a Time Machine backup drive to your new Mac. Personally, I do it manually using Finder, because I have more control over what gets transferred (and how it is done), but Migration Assistant is certainly convenient. You can post back if you have questions about it.
You CAN copy your data into the Shared folder, and that would make the data accessible to more than one user account on your MacBook. However, if you are the only user, there is no need to use the Shared folder; just copy the files directly from the external drive to the internal drive, into your +user home folder+ (the house icon in the Finder window sidebar).
you mentioned that some files (particularly music files) won't automatically pop up into iTunes
Again, the original topic poster was trying to merge data from two accounts into one account. In that case, you have to pick one account as the master and add the data from the other account to it. That makes it hard to preserve things like iTunes playlists, rating, etc. from the account that is NOT the master account. You can add music easily by dragging and dropping the music files to the iTunes window, but that just adds the songs to the library; it does not preserve supporting data such as ratings, playlists, play count, etc.
In your case, it should be easier. Here's how to do it for iTunes. On the MacBook, quit iTunes if it is running. Open a Finder window to
<user home folder>/Music/
In that folder, there is a folder called iTunes. If you use the default settings for iTunes, that folder has all the data iTunes uses. So what you need to do is copy the iTunes folder from the old Mac to take the place of the iTunes folder on the new Mac. For this to work, on the old iMac, iTunes must also have kept all of its data in the iTunes folder (you can post back if it was set up differently on the old Mac). After replacing the existing iTunes folder with the iTunes folder from the old Mac, when you run iTunes on the new Mac, it will use the data from the iTunes folder you copied over from the old Mac, and iTunes should look like it did on the old Mac. The only concern is that the old Mac was pretty old, so it may have used an older version of iTunes, not the current iTunes 9. However, I think iTunes will convert the data as needed, when it runs for the first time with the data, so it should be OK.
I kind of summarized how to do it instead of writing the steps in detail, so if you have any questions, you can post back.

Lost gmail folder content when transferring from old mac to new

I got a new Mac Pro recently and used Migration Assistant to transfer everything from my old mac to the new one. Everything worked fine except in my gmail account. None of the mailbox folders I set up transferred. How can I get them onto the new machine?

If I activate 2-step verification now, would it somehow allow me to access the "lost" gmail folders?
No. Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Aperture 3 Issues when transferring from old Mac to new Mac

I just bought a new iMac 21.5 yesterday. I transferred all my apps and files from the old 17 inch from my Time Machine Backup.
I am running Ap 3.0.3 - RAW 3.0.2 - all software updates I can find are installed.
Have reinstalled 3.0.3 Aperture update
MOst things seem to have worked fine except Aperture.
Some images in some projects either don't display at all, some just have the white box, some are just black, some are full of odd noise (as if the raw version wasnt supported)...
All displayed perfectly before the move - the files are on my drive.
All are in JPG format.
Help please!

I had this same problem but now I think it is as "solved" as it can be. I tried rebuilding multiple times, and I even created a new library and imported my old one into it. After lengthy discussions with Apple support, it seems the problem is a conflict between Snow Leopard 10.6.3, Aperture 3, and the NVIDIA GeForce 7300 GT graphics card. The good news is that Apple is aware of the problem and is working on it, the bad news is that they haven't yet fixed it.
I followed the Apple tech's recommendation and it seemed to mostly fix the problem. He had me roll back from 10.6.3 to 10.6.2. You'll need to boot from your Snow Leopard install disc and re-install SL (no, this will not do anything to your files). Then, go to the Apple website and download the 10.6.2 combo update and install. (i.e., do not allow the computer to do an automatic software upgrade to 10.6.3 like it wants to).
What I get now is my Aperture 3 working much faster and with none of the strange artifacts I had before. The only exception is when I'm viewing a photo in full screen mode - for some shots I'm still getting the weirdness. However, this is still a huge improvement over what I had before - I can now actually use Aperture again
Good luck!

HT201317 Privacy concerns having files transferred from old Mac to new Mac.

I am buying a new Mac. I was told that all of my files and photos on my old Mac could be transferred to my new Mac if I left both Macs at the Apple Store for a couple of days. To be honest, I am concerned about privacy issues. Is there is a way to remove files and photos to iCloud and off the old Mac before taking it to the Apple Store?

Welcome to the Apple Community.
You can't use iCloud to do this.
Moving information from one Mac to another is quite simple and you could do it yourself.
http://support.apple.com/kb/HT4889

Files transferred from old iMac to new iMac, permission/editing problems

I recently purchased a new iMac this month because my old one was no longer working, I can't keep it on for more than 2 minutes.
I always used Time Machine to back up my files, when I transferred all my files to my new iMac I was given alot of trouble with the permissions problem. I got the files to open by copying the folders to the desktop but, for example, all my iTunes music cannot be edited. I get alot of error messages about not being able to save iTunes library because I don't have write permissions.
How do I authenticate the files/folders so I don't have this problem?
Old iMac was purchased in Dec 2007, it has Leopard OS.
Message was edited by: Mark Rowan

If you want your new computer to be very much like your old, during the startup you would choose to migrate before choosing to create a new user. Then, the migration assistant creates the same user on the new computer. Did you do that?
Or did you do this:
If you first create a new user with the same name as the old one you want to migrate, Migration Assistant won't let you migrate as that username since it already exists.
You could create a new user that you will later use as an admin/test account. Then, while logged into the new account, delete the old account and use the Migration Assistant in the Utilities folder to Migrate from your Time Machine backup--it should create a new user with the old user info.
However, if you didn't get any errors from Migration Assistant, I'm not sure why the file permissions are askew.

Transferring from old pc to new one

does anyone know how to transfer my library from my old pc to my new one?
There are a couple that have gone onto the new one for some reason and not the rest.
Any advice would be appreciated.

There are a few things you could do, from networking the two computers, using an external hard drive or even use an iPod to make the move. Have a look at this User Tip: Migrating iTunes for Windows to a new PC
If you can network the computers there is also this one: Copying songs over a network to use with iTunes for Windows

Transferring from old mac to new using ipod

I was able to get all of my songs from my old macbook onto my ipod (about 3000 songs), but when I try to put all of the songs onto my new macbook, I only end up w/about 1850 songs. Authorized the new computer. Can anyone help me?

see if this post by Zevoneer helps.
JGG

Transfering from wireless harddrive to new wireless harddrive

Similar Messages

Maybe you are looking for