Transfering Identification infotype from HR to CRM

Hi
Gurus, I replicated central person from HR to CRM, using message 312090, there are those infotypes what can be transfered:0000, 0001, 0002, 0006, 0009, 0105 and their sub-types, but Infotype 0185 is not mentionated, this infotype contain personal ID, like social security, passport, and so on...
I´m not IDOC expert, but I need to know whether is possible to transfer that infotype without mofification in the estandar Message Type, if don´t, please could you tell me how to modificated to do it??
Thanks a lot

Hi,
Can you share how you have solved this.
Thanks in advance
balu

Similar Messages

When transferring HR data from ECC to CRM via change pointers

When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
paricularly the last name and first name of BUT000
Do you have any idea why this could be happening
Thanks in advance

Hi Kittu,
Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
use this links kittu.
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
Creating a change pointer and subsequently triggering an IDOC
thanks
karthik

Transferring of nmaterial from ECC to CRM using middleware tool (R3AC1)

Hello Forum,
I need to transfer material from ECC to CRM where MARA-MTART = 'ZAWA'
In CRM MARA table do not exist.
I need help in transferring data from ECC to CRM using R3AC1 .
This transaction is not in ECC but it is in CRM.
Thanks & Regards
Lovleen

Hello Lovleen,
In transaction R3AC1 you can define the filters for the adapter object MATERIAL.
THen you can do an initial load for this object via txn. R3AS which'll download materials from ECC to CRM.
Thnx.

Transferring ORg Data From ECC to CRM

Hi,
An ORg structure was maintianed manually in our CRM system. Without deleting the strucutre we tried to generate the ORg strucutre from ECC using the program CRMC_R3_ORG_GENERATE .
Now it created problems and our products and business partners are not picking up the Sales Org Data.
When we tried to regenerate the org using CRMC_R3_ORG_GENERATE a dump error is observed.
We tried deleting the org strucutre using report rhrhdl00 but it didnt worked.
Can you guys help us in bringing the Sales Org Data from the ECC

Hello Vijay,
you can delete the complete org structure in order to copy it again
from the R/3. For that please use report RHRHDL00 to completely
delete all org units.
Enter "O" for object type and the number of your root org unit as ID.
Enter "ORGEH" as evaluation path and execute the program (you can first
check what will happen by leaving the "test" flag set). Kindly refer
to the documentation attached to this report in trx. SE38. You should
repeat this for all other root org units.
Unfortunately this report does not delete the corresponding Business
partners created in role Organisational unit, but they can be deleted
by means of trx. BUPA_DEL.
With report RHCHECKRELATIONS you might delete evetualy remained
relations for these objects.
Before reprocess report CRMC_R3_ORG_GENERATE you need to
refresh the buffer(before note 696229, generated records were
considered as already saved in PPOMA_CRM).
For example this report could be :
REPORT CRM_ORGMAN_R3_ORGDATA_DEL_GEN.
DATA: lv_answer TYPE char1.
START-OF-SELECTION.
popup to confirm
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
    EXPORTING
      defaultoption = 'N'
      titel         = text-001
      textline1     = text-002
    IMPORTING
      answer        = lv_answer.
IF lv_answer = 'J'.
refresh buffer
    DELETE FROM DATABASE indx(st) ID 'KEY'.
ENDIF.
Execute this report and then CRM org data could be created via
trnasaction CRMC_R3_ORG_GENERATE
Regards, Gerhard

CRM BP Identification number entries (Identification tab) from CRM to ECC

Hi,
I have a requirement to map the CRM BP Identification number entries (under Identification tab) from CRM to ECC alongwith BP flow from CRM to ECC.
1. Is it mapped by standard framework and do we have any view in ECC customer master to display the identification numbers?
2. If not, Is it stored in some table in ECC?
Please suggest,
Thanks.

Hi,
Were you able to resolve this as I am looking to do the same thing? From my investigation, I can't see anything standard that would transfer this data, although it does look like the Identification number is held within the BDoc.
I assume the solution would be to map the field into an XD01 field (either a bespoke field or standard - we are planning to use Corporate Group) but i'm not sure how to progress this... I have found some FM's in table CRMSUBTAB which look like the right sort of thing so that is my next area to investigate.
Please let me know if you have managed to solve this some other way!
Cara

Availability transfer from HCM to CRM

Hi,
Could you please help on configuration steps for transferring availabilty of the employee from ECC 6.0 HCM to CRM 7.0 EHP1. We have implemented the Service Resource Planning (Workforce Deployment)
We have successfully transferred employees from HR to CRM with Qualifications.
1. What are the infotypes to transferred for mapping the time allocation types in CRM and where is the mapping in CRM and ECC maintained.
Any pointers to latest configuration guide or good documentation will be appreciated.
Regards,
Shridhar

Hi Salil,
Thanks for the quick response. I have done the integration by referring to the note 550055 and we are able to replicate employees with qualifications.
But we are having issues in assigning the avaialbilities to the employee in service arrangement. In CRM we can create availability template and assign it to resources but with HR integration this is not possible in CRM. The availabilites has to come from HR.
Is there any customization to setup the mapping with CRM availabilty template in HR.

Replication of bp name field from ERP to CRM

Hi experts,
We have a problem in ERP to CRM master data replication.
We have already connected our ERP (ECC 5.0) system to CRM 7.0.
We have made initial master business partners (bp) data load from ERP to CRM without problems.
All bp fields, including NAME (but000-name_org1) are transfered correct from ERP (KNA1-NAME1) to CRM.
We have a z program in ERP that is used by users to change the customers names (KNA1-name1).
When we use our custom program in ERP to change the kna1-name1 field in ERP, the bp name field is not changes in CRM.
Using XD02 or FD02 in ERP to change the name (kna1-name1) field in ERP the replication of this field to CRM is correct.
KNA1 table is updated correctly in ERP using our custom program .
What does transactions XD02 and FD02 has that make name filed replicated in CRM?
Thanks in advanced.

Hi,
First variant:
You have to retry load business partners by request:
Tcode R3AR4, R3AR2, R3AR3
So, system retrive new data from tables and transfer to CRM.
Second variant:
You have to add to your z-program part, there you fill data in the CRM system also (via RFC).
Denis.

Problem in data transfer from BW to CRM

Dear Guys,
I am facing one problem when i am tranfering the data from BW to CRM system (using Analysis Process Designer).
When i am transfering data from standard ODS, data has changed properly.
But in custom ODS, data has not changed.
In both part, upto aggregation data has come.
Any thing i have missed out in custom ODS.
Please anybody give inputs.......
Thanks in advance.
Regards,
Vivek.V

Hi Vivek,
There is no special process for this cube load. Just check the job log and check for any short dump in R/3 while running the extractor.
I checked the datasource help link for this cube but there is nothing special mentioned:
http://help.sap.com/saphelp_nw04/helpdata/en/da/f7bc3961d4f339e10000000a114084/content.htm
Bye
Dinesh

Transferring standard HR Idoc fields to CRM Central Person via ALE

Hello experts!
Here is a description of a scenario I would like some help with please.
We have a fully functioning standard ALE distribution of HRMD_ABA05
IDoc from an HR Instance to a CRM Instance.
The integration is maintaining Central Person data in CRM and then
it maintains the Employee role Business Partner data from the CP.
However it is a requirement to include the additional communication
types and numbers stored in the HR System's PA0006 InfoType.
Our requirement is to transfer fields PA0006-COM01, PA0006-NUM01... etc
from HR to CRM. I understand that the target Central Person InfoType
of PA0006 in CRM is HRP5583. This does not however contain the COM01,
NUM01 fields.
To this end I have tried in vain to implement the instructions
contained in the cookbook attached to SAP Note 758426.
I understand that in order to map this fields to the CRM Employee BP
they must first exist on the Central Person record.
I believe our scenario to be similar to Scenario 2 as described in the
Cookbook in note 758426 except that the data already exists in the
source IDoc.
I have an implementation of Badi HRALEX_INBOUND but am unable to step
into it from debug despite placing external breakpoints with the
correct user... I'm not sure where or when this Badi should trigger?
I would therefore like to know how to extend HRP5583 to include the
extra standard data from PA0006.
Thanks in advance for any help provided.
Jim

hi
you can use PFAL to transfer HR master data.
the data transfer from r/3 to crm is by means of bdoc and not through idoc.
http://help.sap.com/saphelp_crm20c/helpdata/en/3b/e13b38fedcb72de10000009b38f889/frameset.htm
cheers,
hakim

Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.

Hi,
While transferring the data of equipements from R3 to CRM, we want to transfer the status of the equipement (data element J_STACT).
I am using IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_R3D_MBDOC_FILL to update the status before transferring the data to CRM.
Here I am getting status of equipment from R3. Now how do I update the status in ct_bus_trans_msg.
I need to update ct_bus_trans_msg-ORDPRP_OBJL_I_D-IOBJECT_ID.
Thank you.

Hi,
Internal table ct_bus_trans_msg have several segments.
These segments are similar to Bdoc meaasge.
There is segment called STATUS_H. You need to populate this segment with status form R/3.
Please reward points if useful
Murali

Issue with Replication of Bank Account Numbers from ECC to CRM.

Hi,
I am trying to transfer business partners from ECC to CRM, I see errors in SMW01, stating that Bank Key is not valid for US, I have then performed the Initial load for DNL_CUST_BNKA to tranfer Bank Master Data, but again getting error but this time on BANK ACCOUNT NUMBER. How do I transfer the BANK ACCOUNT NUMBER of Business Partners from ECC to CRM. Before starting the initial load for BUPA_MAIN do I need to run any other Initial load to move the BANK ACCOUNT NUMBERS to CRM?
I have already moved Bank Master data using DNL_CUST_BNKA, but can't able to replicate BANK ACCOUNT NUMBERS, can someone please provide me some steps which I need to perform to tranfer BANK ACCOUNT NUMBER.
Now when I ran the initial load for BUPA_MAIN , all Business partners which do not have BANK ACCOUNT NUMBERS are replicated successfully but the one which have Bank Details did not got transferred and gave errors for BANK ACCOUNT NUMBER, Please provide some suggestions.
Thanks.
Jennifer

Willie,
Thanks for the reply:
Error: BANK ACCOUNT NUMBER ******8547 is not valid
Support pack level:
SAP_ABA 701 0003
SAP_BASIS 701 0003
BBPCRM 700 0002
Thanks.
Jennifer

Issues in employee replication from ECC to CRM through ALE/IDOC

Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.

Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George

Data transfer ship-to party from ERP to CRM with role ship-to

We currently have an ERP system and we want to transfer the various customers to CRM but with different roles e.g. we want the ship-to accounts (account group 0002 in ERP) to be created with a role of ship-to in CRM. When we transfer the data at the moment, all accounts are being created in CRM with the role of sold-to.
Does anyone know if this is possible and if so, how?

Hi Johan,
Thank you for your helpful response. Once we have done the initial transfer of data from ERP to CRM, we want the CRM system to be the master system for creating customer records. However, we will create some customers with a role of ship-to in CRM and we want to these to be transferred to CRM with an account group for ship-to customers. Do you know if this is possible?
Regards
Helen

Infotype 0007 integration to CRM

Hi,
I have a requirement to copy infotype 0007 from ECC to CRM using the ALE. I have been able to get the standard infotypes (0000, 0001, 0002, 0006 and 0105) into CRM but 0007 seems to be ignored.
The control table T77S0 is set up as per note 550055.
We are sending only Personel Data through to CRM, no org data.
BP's have created and look fine on CRM however I do not see any fields in CRM (TCode BP) that relate to the info on infotype 0007.
Does CRM allow for this data to be brought across?
Thanks,
Dean

Hi Richard,
I had a chat with a colleague about this and he showed me a chapter 10 in the book "Practical Workflow for SAP".
There you find a description of eventing and exit technologies for CRM, HCM, FIN, ...
Those are all free of modification and allow you not only to use workflow but with a little glue code to also call BRFplus. The glue consists of a call into BRFplus - handing over relevant data and taken back results. This is something that you can also find in several papers in SDN.
BR,
Carsten
P.S. Maybe also the book "BRFplus -- Business Rule Management for ABAP Applications" is interesting for you. Will probably be out Q3 2010.

Identification field in installed Base-CRM Service

We are creating installed base components from ECC to CRM ie, from equipments in CS module to installed base objects in CRM.
The serial number entered in ECC flows in to CRM Service in component details tab in individual obejct automatically.
equipments created in IE01 will flow to CRM and can be viewed in ib53.
We want to copy the serial number field to identification field to enable better search capabilities.

HI Femke Visser
A) Assign the Object family to Install Base Category, Follow the Menu Path to assign
IMG->Customer Relationship Management ->Master Data ->Installed Base ->Individual Objects/ Object Family -> Assign Object family to Installed base Categories
B) Create the categories and hierarchies you require for your object families. At least one of these categories must be created within the base hierarchy for the product type Material and then assigned to the relevant object family.
1) To create Category go to T.code COMM_HIERARCHY and in the Tab "Category" you will find a field called "Object Family", choose the right Object family
2) In the Tab "Set Types" add the set types you want to include
Refer the link below, which will give some insight about the Set Types and Hierarchy and Categories
http://help.sap.com/saphelp_crm50/helpdata/en/71/401e400191f72ee10000000a1550b0/frameset.htm
Regards
Milan
Please reward with points

Transfering Identification infotype from HR to CRM

Similar Messages

Maybe you are looking for