Transfering ps cards hd 720 25p into finalcut

Im importing From p2 card DVCPRO HD 720 25p into final cut pro through log and capture. but when you play back the quick time movie or view the footate in the browser the image stobres and flickers and goes out of sink with voice.
what size processor is needed to play this format?
any clues??
cheers

Hi,
welcome to the forum.
You DON'T log and capture DVCPRO HD from P2 cards but use Log&Transfer to ingest P2 content.
Log&transfer is right below Log&Capture.
If you are using an earlier version of FCP like 5.1.4 then go to file>import>Panasonic P2 but I am pretty sure that support for DVCPRO HD 720 25p only came with FCP6.
best,
G.

Similar Messages

HVX 720 25p support - NAB is over

I am a European HVX200 user. When can I cut finally my 720 25p material? Before 3 years I am switched too mac, must I now really switch back to the PC?
http://www.ag-hvx200.de

I know you are in Europe and all, but is there any reason you cannot shot 720p24 24PN? That is the frame rate of film, and this way you can get started and edit.
Or you can shoot 720p24 at 59.94 and convert to PAL later when there is support. I have seen some shows transferred from here to the UK and from the UK to here and they all look good.
I know it is a workaround, but at least you can get started. Apple is tight lipped about release dates for anything.
Dunno about raylight. Other than 720p25 what else does it offer?
Shane

My Olympic camera SD card doesn't fit into the SD card camera reader. Apple advised me to purchase the product in order to import photos to my IPad.

My Olympic camera SD card doesn't fit into the SD card camera reader. Apple advised me to purchase the product in order to import photos to my IPad. How do I over ride this problem. How do I import photos from an Olympus FE-340 directly to my IPad?

Your camera uses an OLympic XD picture card http://www.amazon.com/Olympus-xD-Picture-Memory-202332-package/dp/B002LC2DQ4/ref =pd_sim_sbs_p_1 This card has different dimensions compared to an SD card.
You should be able to plug the cable that came with your camera into the camera connection kit to import the pics.
 Cheers, Tom

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved

I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Varicam footage shot at 720/25p

We are working on a 3 hour minseries. About 2/3rd of the footage is original Panasonic varicam shot at 720/25p. The other third will be stock and stills from a variety of NTSC and PAL sources (it's an historical project). I need to end up with a primary PAL version and also a secondary NTSC version. Because I anticipate a lot of rendering to match formats, I'd like to create an offline version with as small files as possible and then conform to an HD PAL format on our fcp.
No one seems exactly sure about the best way to do this. We've been advised to log and capture at DV quality on the fcp. We anticipate a PAL broadcast, so we've been advised to do the offline at DV/50 instead of DV/25. (PAl tv being 50hz.) I'm assuming we can do this from a Panasonic 1200A deck with a direct firewire connection
Then, we've been told, conform the edl at 1080/50i (instead of at 720/25p because most tv stations prefer a 1080 master. This way we would control the upconvert ourselves rather than let someone else do it.
Because this is a large project with many tapes, we'd like to get started in the right way.
Does our plan make sense? What am I not thinking about?
I would love to hear from someone who has actually done this!
Thanks, Chrisk1

You seem to keep asking the same question over and over, but moving the goal posts.
If you would state the facts (about your footage and FCP application) it would save a lot of time and frustration. The pople who anwer questions here are not Apple employees, they are video editors, doing it in their own time, and for no money.
When you CAPTURE the footage from the camera, the FCP settings should be EXACTLY the same as the footage you are capturing from the camera. This way, there is no compression - the compression was done in the camera. You want to avoid further compression if you can.
When you drop the footage onto a timeline, the timeline settings should be exactly as the footage was shot in-camera.
When you then move the project to FCP X, you use the 7toX application to convert the Final Cut Pro PROJECT for use in FCP X.
You do NOT convert the actual media files (in any way) they will be referenced by FCP X in the same way that FCP6 did. 7toX can be used for FCP 6 projects but there may be issues if you have any speed changes:
Only when you output your final movie, should you consider conversion - and if you have grainy night-time stuff, conversion is best avoided if possible.
Certainly avoid (what you repeatedly say you are doing) going from 1080i (interlaced) to 1080p (progressive).
Andy

Can I paste a 1280 x 720 slide into a 1680 x 1050 presentation?

I'd like to be able to paste samples of various shows in various resolutions into a single presentation without hyperlinks. I'm presenting on my 17", so I'd like to use the full-screen resolution, 1680 x 1050. I'd like to paste a 1280 x 720 show into it, but Keynote automatically resizes every frame, and everything scales inaccurately do to the difference in aspect ratios. I don't want to have to rebuild every slide. I know I can copy the contents of each slide and paste it onto a blank slide in the final presentation, and the animations copy over, but the transitions get lost. Is there a way to either import the file or copy the complete slide show from the navigator and maintain the integrity of the original?

Thanks -
I hadn't thought of 1680 x 945, I'll try that next go-round.
In the meantime, I created a special frame inside my target presentation, and just copied and pasted the elements I wanted from the smaller slides into the frame in a slide-by-slide process. It actually worked perfectly, and allowed me to highlight the samples in a worthwhile way.
But thanks for the hint! It'll come in handy soon.

Importing dvd into finalcut

What is the best way to import a dvd into finalcut? This is not a copywrited disc but personal video that has been put on dvd. Is there anyother way than going through software like handbrake?
Tried handbrake and 2 hours was going to take over 10 hours.

I thought there might be an easier way...When I've needed footage off a previously burned DVD, I play the DVD and record it onto a camcorder using miniDV tapes and the import footage I need into FCP.

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

No matter what i do, my iphone will not recognize any sim card that is put into the phone, and i have tried 3 different networks

Most likely the phone is locked to a carrier that you haven't tried yet.

T420 - fan repaired, but now the SD card won't fit into slot

I'm going to post a couple of the current issues my daughter, freshman ID student is having with her brand new t420 laptop. Here's this one...
My daughter had issues with a very noisy fan. She had it fixed, and I'm not sure what they did. However, now her SD card won't fit into the SD slot (which it used to do). Any ideas on what might be wrong?
Thanks!!
Linda
Solved!
Go to Solution.

@Linda,
Did it get stuck when putting the SD card in? If the SD card is inserted correctly but can't fit in properly then I would suggest to send it support for them to check.
//JameZ
edit note: fix grammar
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

What type of line card can be inserted into 7606 or 6509?

what type of line card can be inserted into 7606 or 6509? Please, differentiate them! Thanks

Hi,
It depend on what IOS version you are running. Older IOS version will not support newer line card. Is there any line card you want to insert between the 7600 and 6500?
Regards,
jerry

Importing 720/25p from P2

Does anybody know if there is already a solution for importing 720/25p IN FCP.
thanks
G5 and powerbook g4 Mac OS X (10.4.1) owner dvx100 and hvx200

OK...UPDATE.
Try this. I have been told (but do not have 720p25 footage to test this with) that if you take the 720p24 Easy Setup, duplicate it and change the framerates to 25, then it will work fine. This answer is so easy and obvious that for some reason I overlooked it.
Please try it and report back. I'd love to know so that I can post it everywhere.
Shane

How do I update my credit card information after logging into my account?

How do I update my credit card info after logging into my account?

Reader doesn't need your credit card. You can sign into your account in the Adobe store and look in at your subscriptions. There may be something there to store your card information if you have a subscription service.

HT3702 I have gift cards that were entered into my account. I since have destroyed the cards and no when i try to purchase music it is asking for the card information. I show a balance, what do i need to do?

I have gift cards that were entered into my account. I since have destroyed the cards and no when i try to purchase music it is asking for the card information. I show a balance, what do i need to do?

See Kappy's great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
 Cheers, Tom

Transfering SIM Card data to new phone?

Hi,
I was wondering if my SIM card holds all my addressbook data? I have just purchased a 6085 and want to transfer the data from my 6061 to my new phone. Will it all be in my SIM card or do I have to re-enter the contents of my old phone data manually to my new one?
Thanks!
Solved!
Go to Solution.

28-Jun-2008 03:55 AM
webgyrl wrote:
I was wondering if my SIM card holds all my addressbook data? I have just purchased a 6085 and want to transfer the data from my 6061 to my new phone. Will it all be in my SIM card or do I have to re-enter the contents of my old phone data manually to my new one?
The 6061 doesn't appear to have any connectivity with the outside. No connection to a computer, no bluetooth etc.
The only way you have of saving yourself any time is to copy your contacts to the SIM card if they're not already there. You can find the commands to do all of this in the "Contacts" menu.
This also assumes that there's enough room on the SIM for all of your numbers. Most SIMs are limited to 200 or 250 numbers, and if you have contacts with multiple numbers (home, mobile, work etc.) they will use up as many slots as there are numbers for those contacts.
Once everything is copied to your SIM, you can insert that SIM into the new phone and most of your data will be accessible. I say "most" because details other than straightforward phone numbers will not have been transferred since the mechanisms on a SIM cannot store them.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Slow data transfere using card reader for PE8 on Win7 machine

I just migrated (reinstall) my PE8 on a new PC (from old WINXP SP2 to a high end WIN7 64 bit) .
I have a ordinary card reader (USB 2.0) for my SD,SDHC, and XD cards.
Everything works excellent on the new machine except for the data transfere rate. When collecting pictures, or videos for that matter, with PE8 Organizer. What takes minutes in my old XP machine takes hours (hours for real) in the new machine.
Since PE8 is a 32 bit app I have also tried on the new machine to change the compatibility for C:\Program Files (x86)\Adobe\Elements Organize\PhotoDownloader.exe. I tested with running PhotoDownloader.exe just as on the old box winXP SP2 and SP3. But it made no difference.
I also looked in performance monitor. Nothing of interest. I had lots and lots of power left.
So..
Now I'm stuck. Both on the problem cause search. Or finding a solution. Anyone got any good ideas to make progress.

My main overall objective is to look at the pictures and films. Not work with them as a hobby as such. (even if it is quite fun, but very time consuming. And time I do not have)
0. The vast majority of files are .mts and .jpg
1. Step one is to get them into PE8 organizer.
2. Batch organizing jobs like renaming, tagging, minor quick enanhcement etc
3. Some hands on changes or add ons like back ground musik.
in short
¬ 70 % are trivial at level. Using mainly the Auto stuff. Want to being in control picturens and films and making them more viewable by removing junk and pain just adding minor enhancement.
¬ 25 % at low-medium level
¬ 5 % at medium level
I hope this answer your question. My question is, do you have any idea how to solve the issue?

Transfering ps cards hd 720 25p into finalcut

Similar Messages

Maybe you are looking for