Transfering to new hard drive

I just purchased a 160gb hd to replace the stock hd in my macbook. Also have an external enclosure and an external hd that is backing up my current 60gb drive. My question is what is the best way to get all of the data from my current drive to the new one. Is it best to take the opportunity to put a clean install of OS X on the new drive, then migrate everything over? Or should I just put the new drive in the enclosure and copy the current drive to the new drive using SuperDuper, then swap it out? Any help and step by step instructions would be greatly appreciated.

It is better to start a new topic rather than adding a question to a three month old topic. That way your question gets the attention it deserves.
Use SuperDuper to clone your current internal drive to the external drive. Test it to make sure that it will boot your Mac and if it does, then you can install your new HD. Then, startup from the clone in the enclosure and clone it back to the new internal drive. Disconnect your external and boot your Mac from the internal as you always have and all should work fine.

Similar Messages

If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
tt2

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
If the library contains any rented movies, they won't play on a different computer.
(109334)

Transferring Purchased Music from iPhone to new hard drive

Hard-drive burned up and has been replaced. Most music was backed up, but not all. And most of the new music (that hasn't been backed-up) is on the iPhone. But I can't copy the files on my iPhone back to my new hard drive. Obviously there are security measures to keep folks from transferring files all over the place. But it seems that if it's on my iPhone, I must have obtained it legally, and there must be some accommodation for a dead hard drive.
Same question for my iPhone apps. I'd rather not pay for apps twice, and iTunes won't let me copy them from my iPhone back onto my 'puter. As soon as I sync apps, they'll all disappear, unless there's some way to convince the phone that it's looking at the old, pre-burned-up-hard-drive.
File>Transfer Purchases sort of worked, but not completely. I have about 600 songs on my iPhone, and it copied about 200 of them to my new hard drive. I have music purchased from iTunes, music copied from purchased CDs, and free downloads (Starbucks, Paste, etc). And there's no trend in what got copied and what didn't. Some of each category was copied, but not all. Very confusing that I can't find a pattern.
OS X 10.5.8, iPhone 3G with 3.1.3

Apps issue solved. Or, more accurately, it's a non-issue. iTunes prompts you that you already bought the app and can download it for free. Not so with music, I'm afraid.

Transferring Itunes data and Library to new hard-drive question

Hello,
First I want to state that I made a mistake when I transferred my music to a new bigger harddrive. My bad.
I look here for some guidance, I read this article after the fact: http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive so it was too late for me and I got these "!" signs on all my song. I have over 5000 songs (not including podcasts, movie and TV shows.
I tried to move my library (succesfully) in my new hard drive so I could keep my laptop clean of all music.
I though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
My question: Does anybody knows what else should be done to fix this issue (if fixable)? I would try to avoid linking all my music one at the time by using the "locate" function that ITunes pop up when you try to start a song.
It is also too bad that you must do it one song at the time, I calculated that if I do 20 songs a day it's going to take me 250 days and more...
Thanks for any idea/solutions you may have
Thierry

I though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
iTunes does not use these files.
They are created only for other apps to access the iTunes library.
Does anybody knows what else should be done to fix this issue (if fixable)?
See this -> iTunes Track CPR v1.3
"This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx). Any correct files found will be added to iTunes and will replace the "dead track" in each playlist it appears in (except Smart Playlists). Most tag data will also be rescued."

HT4413 When migrating from time machine to my new hard drive, only some files and applications and setting are transferred, not all of them. In my latest back up I have them all. How can I fix that?

When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.

sohs wrote:
When migrating from time machine to a new hard drive, not all is transferd, only partial documents, applications , settings etc. How can I migrate the latest back-up with all the content.
If you want to use Time Machine to recover the contents of one of its a backups to a new drive, follow the instructions in Mac OS X 10.6: Recovering your entire system. Note that you must select the "Restore System From Backup" option from the Utilities menu of the Installer disc to do this.
Also note that if you are transferring files to a hard drive to be used with a different computer, you should use Migration Assistant instead. This intentionally will not copy everything because some settings, applications, etc. are not compatible computer-to-computer. Migration Assistant will copy everything that is.

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
How did you import the photos to iPad and iPhone?
If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
See this document: http://support.apple.com/kb/HT4236
You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
Save photos to your computer using iTunes
Connect your iOS device to your computer.
Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
Select all the photos in an album or event: Tap All.
In iTunes, click the button for your device and click Apps at the top of the window.
Below File Sharing, select iPhoto (in Apps).
Select the Shared Photos folder under iPhoto Documents.
Click Save To and select the location on your computer where you want to save the items.
To view your photos, go to the Finder and look in the location you selected above.

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Help with installing new hard drive and transferring data?

I have a MacBook Pro 13-inch mid 2009 that is running OS X version 10.6.8. The hard drive is full and I have a new one I'd like to install, but I am awfly intimidated. I'm hoping that someone could shed some light on kindergarten-style step-by-step instructions on how to make the switch. I'm mostly concerned about the data transfer part. I've found a handy video about physically installing the drive, so I think I'll be ok there.
Here are the items I have in preperation for the switch:
• 1.0 TB Hitachi Travelstar 7200RPM Hard Drive
• Portable bus-powered USB 3.0 storage solution (to turn my old hard drive into an external hard drive)
• Tools including a small phillips screwdriver and some Torx Screwdrivers
• Time Machine Extermal Hard Drive with all of my backups
Here are some things I have read that I find to be confusing
• Some suggest I should transfer my data from the old hard drive to new new one BEFORE I install the new one. (I'm not sure how that works.)
• Some suggest upgrading to the latest OS X before transferring any data. (Would that be Mavericks? I haven't upgraded to that yet. Is that necissary?)
• Some suggest that I will need the MacBook Pro's installation disk to make the switch. (I don't know where that disk is. Do I really need it?)
If anyone can clarify any of the above issues that I've listed as confusing, that would be great. Also, if anyone can help me figure out what steps to do first, second, third, etc., that would be great.
Thanks!

Also,
Will I need the install disks for the Adobe Creative Suite and Microsoft office when I put in the new hard drive?

I have had a new hard drive installed. On start up I transferred all my settings and documents from my time capsule. Once complete I have two user accounts. Mine and guest. I cannot access either. Mine says password incorrect even though its not.

I have had a new hard drive installed. On start up I transferred all my settings and documents from my time capsule. Once complete I have two user accounts. Mine and guest. I cannot access either. Mine says password incorrect even though its not. Any idea what is wrong here and how I can reset my password. I don't have a start up disc. Thanks very much

From System Preferences/Help:
Reset your login password using your Apple ID
Before you can use your Apple ID to reset your login password, make sure that FileVault isn’t enabled on your computer.
Also make sure that an Apple ID is associated with your user account, and that an administrator has given you permission to reset your own password using an Apple ID. For more information, see this help topic:
Associate Apple IDs with your user account
Make sure your computer is connected to the Internet.
In the login window, click the question mark in the password field, and then click the arrow in the dialog that appears.
Enter an Apple ID and password, and then click Reset Password.
I don't know if it works.

Problems "transferring" files from time machine to new hard drive

I was experieincing the spinning beach ball of death so I replaced my hard drive with a new one. I am running mountain lion (10.8.2) and the new Hard drive has two partions - one for "start up" which I was able to use migration assisant to move over my applications from my time machine. The problem I am having is that I can't figure out how to get my user account data transferred to my the data partition (journal extended) on my new hard drive.
When I enter time machine I can't "see" my last back updates before I changed hard drives.
I put my old hard drive in a case and it "isn't working" so I can't just copy data from my old hard drive. It did work initially but now it doesn't mount and I can't see it in disk utility.
Any Ideas on how I can get my user data off my time machine back up?
I forgot to mention that when I go into my external hard drive containing my time machine via finder and click on the folder with my user data I'm not able to open the various files - they have a red "-" and it says, The folder “Desktop” can’t be opened because you don’t have permission to see its contents. In disk utility I can't run repair disk permision on my time machine drive because it is grayed out.
Thanks - Dave

I see. Don't do that. I do not believe using Migration Assistant is a valid method of accomplishing what you intend.
Furthermore, unless you are using the "Enter Time Machine" feature, you really shouldn't pick and choose what you want to copy from a Time Machine backup... "no user serviceable parts inside". You can certainly find and individual files and folders in the Finder, but you will run into the permissions problems you describle. I would not attempt to circumvent those protections.
As I understand Time Machine, you must either restore a volume from a Time Machine backup, thereby erasing the volume first, or restore individual files and folders by using "Enter Time Machine" when the backup has already been properly designated for the source.
Since your replacement hard disk - the source, now - is technically new, the latter is not an option. It's as if you were trying to restore to a different computer. This can't be done.

Transferring songs from iPod to computer (new hard drive)

My hard drive crashed and won't be able to backup all my music/songs that are not purchased from iTunes. How would I transfer all the songs from my iPod to my new hard drive (PC)? Is there any possibility?

Be very careful when connecting an iPod full of music to an empty iTunes library.There is very real risk of permanently losing all the music.
To prevent auto sync, before you connect the iPod go to the iTunes preferences and select "devices", then select "disable automatic syncing for iPhones and iPods".
An alternative method is to connect the iPod whilst holding down the 'control+shift' keys and do not let them go until your iPod appears in iTunes.
If you see a message that your iPod is associated with a different library and asks if you want to link to a new one, make sure you press "Cancel".
If you should click on "Erase and Sync" will erase all the content currently on your iPod and it will be replaced with the content of the iTunes library you just connected to.
When you've pressed cancel your iPod should appear in the iTunes source list under "devices" and allow you to change the update setting to manage the iPod content manually, and that will let you use your iPod for the time being without the risk of accidentally erasing the contents.
Then do any of the following to transfer your music from iPod back to the computer/iTunes.
For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod or iPhone to a computer.
For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola and iDump and iPodRobot.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
More information is contained here.
Copying content from your iPod to your computer - The Definitive Guide.

MDD freezes when transferring files to new Hard Drive.

I am using a G4 MDD Dual Processor Tower with 1 GB DDR SDRAM, Dual 1 GHz and an 80 GB hard Drive on an ATA/100 controller, using a cable select cable (OEM). I just installed an additional PATA Western Digital WES-WD3200JB 320 GB hard drive. Both drives are on the ATA/100 and on Cable Select mode. The 80GB hard drive (which has the system installed on it) was originally installed in the slave position (and still is). I zeroed the drive and did a PRAM reset before I partitioned and formatted the drive.
I have had freeze up troubles when I try to transfer files from the old 80GB Hard Drive to this new 320 GB one. I have tried transferring files from a DVD to this new Hard Drive without a problem. I have tried transferring that same load of files from the new Hard Drive to the old one without a problem. The only time it seems to freeze up is when I try to transfer a large number of files from the old Hard Drive to the new one. The problem doesn’t occur with large files, just with a large number of files. For example, I have transferred a single 917MB file without a problem, but when I try to transfer a folder that has 158 items totaling 38.6 MB, that is when my computer freezes up. However, I have frequently transferred folders containing a few (under 20) files that are under 5 MB without a problem.
I have considered putting the new drive on the ATA-66 controller instead of the ATA-100 (as several Apple forum posts recommend), but I would rather figure out why the freeze up occurs in only this specific set of circumstances.
Any theories on what is causing this freeze up, or suggestions on how to fix it would be greatly appreciated. Thanks!

ATA doesn't share a bus very nicely, you can always put the WD 320 over to ATA/100 or do that now, but yes, isolate them.
You may have directory problem or bad sectors, so eliminating that would be another step.
Some people even recommend zeroing a new drive right off the bat.
PATA should not have the problems of SATA, but you might want to look into whether this drive has come up in other problems. OWC includes it in one of the FW cases also.
And you could move your OEM to FW case, can't imagine continuing to use the OEM drive at this point (they were slow and had only 2MB cache then, I use mine for an emergency FW backup system).

Transferring data from iPhone to new hard drive

If I get a new hard drive on my MacBook, how do I go about transferring my data on my iPhone to the new hard drive without losing the data?

What data?
The iphone is not a back up device. Where is your back up? Using your back up is the simplest way.
If you have at least one unique contact and calendar entry in your computer, you should get the option to merge the data when you first sync.
You can transfer itunes purchases: File>Transfer Purchase
The other music and pics cannot be synced back to the computer -it is a one way sync -computer to iphone.

Transfering Adobe Acrobat 9 Pro to a new hard drive

I had to change hard drives and now need to re-install all my application programs. I was able to download Acrobat 9 Pro, but my licensed copy has now turned in to a 30 day trial and I don't know how to get a permanent licensed version. When I call up the software, I get a Software Setup screen that gives me two options. The first option, which is checked by default, is: "I have a serial number for this product." and a serial number is listed below. It is the same serial number I was issued when I purchased Acrobat 9 Pro.
So far so good. Then I click on next, and here is where the trouble begins. I get an Upgrade Check window with the following text:
The serial number you entered indicates that your setup is for a upgrade version of Adobe Acrobat Pro
To be eligible for this upgrade, you must already own qualifying product.
We looked in the default locations for qualifying products installed on this machine, but none were found.
You may verify upgrade eligibility without installing your previous software by completing the fields below.
Select a product you already own
Enter the serial number for this product
Acrobat 9 Pro is not listed in the drop down menu of product selections, so I am unable to get rid of my trial status.
Please help me. I am not trying to upgrade. I am just trying to download a replacement copy of Acrobat 9 Pro, which I already have a license for, on my new hard drive.
Thanks.

The message is indicating you are trying to install an upgrade version of the software, meaning when you purchased it, you purcjhased it as an upgrade to an earlier version. You need to provide proof that you meet the eligibility requirements by specifying the earlier version and submitting its serial number. If you believe you purchased the software as a full version and not an upgrade then you will need to contact Adobe Support directly by chat or phone to work things out.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Transfering to new hard drive

Similar Messages

Maybe you are looking for