Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Similar Messages

  • I am using Mavericks. I had a list of VIPS and used it extensively. Now it has disappeared and VIPs on the menu bar is faded. There is nil response to VIP in help. Can you tell me what has happened?

    I am using Mavericks. In Mail I had a list of VIPS and used it extensively. Now it has disappeared and VIPs on the menu bar is faded. There is nil response to VIP in help. Can you tell me what has happened?

    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData/VIPSenders.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info in Finder (or just Show Info)
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?
    If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • HT201320 When I access my email from the iPhone, hit "inbox", the new messages appear briefly, but then just evaporate.  I can't find them anywhere - not in inbox, not in junk, trash, saved - nowhere.  Can anyone tell me what is happening?

    When I access my email from the iPhone, new messages appear only briefly and then immediately disappear, before I do anything.  Only old messages that were already in my inbox are visible.  I can't find the new messages anywhere -- they have not moved to Saved, Junk, Trash, anything.  IT is like the iPhone just ate them.  Can anyone tell me what I am doing wrong?

    If you have a POP3 account this means that another "client" email program has retrieved the messages and deleted the messages from the server. You need to change the server settings on that device to leave the messages on the server.
    If you have an IMAP or MS Exchange account this means that someone read the messages on another device and either deleted them or moved them to another folder. Or there is an automated script that moved them to another folder.

  • Can anyone tell me what would happen if I left the photo field blank on the Cards app on iOS?

    I like one of the letterpress designs but i'd prefer if the photo did not exist on the inside cover.
    Does anyone know what would happen if I left it blank or of any way to remove it?
    Thanks

    Try here:
    iTunes Store: My credit card's security code or zip code does not match my bank's records
    Then try contacting iTunes
    Apple - Support - iTunes - Contact Us

  • I have been updated to the latest version I believe , since that time I am experencing diffuclties entering some sites , and my name promt doesnt allways work with things like my email account ... can you tell me what has changed

    Is there something I can turn on or off ie cookies ?

    Is there something I can turn on or off ie cookies ?

  • After upgrading to v 3.6.3 I get a "node not found" error whenever I try to exeute a link found by Google. I am running wind 7 64-bit Home Premium. Yahoo works fine. Can anyone tell me what is happening?

    I have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
    == This happened ==
    Every time Firefox opened

    I have recently installed 3.6.3 on a new machine running win 7 64-bit Home Premium. When I do a Google search and click on a link resulting from the search I get a "JavaScript Application Debug Error" followed buy a lengthy description (which I cannot copy to the clipboard). I cannot close the dialog box so the only solution is to close down Firefox and restart it. Any help gratefully appreciated!
    == This happened ==
    Every time Firefox opened

  • HT201303 I received this update from Apple, but I have no record of altering anything, can you tell me what has been updated, who updated anything, and how was it done?  Hello,  The following information for your Apple ID was updated on 03/22/2014:  Phone

    I received this  update from Apple, but I have no record of altering anything, in particular telephone numbers, can anyone tell me what has been updated, who updated it, and how was entry made to my account?
    Hello,
    The following information for your Apple ID was updated on 03/22/2014:
    Phone number(s)
    If these changes were made in error, please CLICK HERE,  to Cancel this changes withing 24hours..
    This is an automated message. Please do not reply to this email. If you need additional help, visit Apple Support.
    Thanks,
    Apple Customer Support

    This is a user to user forum, so no one here can provide an answer.  You should contact iTunes Support directly.
    Here's how you can do that:  http://www.apple.com/support/itunes/contact/

  • TS4009 My iCloud storage is full and I need to delete some stuff.  Can anyone tell me what is important to keep and what not?  I have done all I can but it still says I need to delete before I can back up on iCloud.

    My iCloud storage is full and I need to delete some stuff.  Can anyone tell me what is important to keep and what not?  I'm just not sure what I really should back up each night and what doesn't really matter.  I know my photo's should back up, but other than that, I'm not really sure.
    I have taken some pics off and videos and appt, but it still says I need to delete before I can back up on iCloud.  I'm starting to wonder if its a glitch with my personal phone.  Can anyone help me?
    Thanks!

    Only you can decide what's critical to back up.  One option is to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083), then either delete them from your phone or exclude the camera roll from your backup in settings.
    You might try going to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll), then look at the size of your next backup.  If it doesn't go down significantly, something else is wrong.

  • Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

    Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

    AFP - Apple Filing Protocol
    The Network Attached Storage (NAS) that you are pointing Time Machine at does not have the features needed by Time Machine in order to do its Thing.  Time Machine needs some specific features that are not typically available on generic networked storage devices.
    There are manufactures that support the Mac OS X HFS+ file system formats and implement all the needed AFP protocol packets necessary so that they can be used with Time Machine, but apparently yours does not.
    If you are not using a networked mounted volume for Time Machine, then more information will be needed about your Time Machine setup.

  • HT4108 My ipad has a little padlock upper right hand corner with a circle arrow around it jut appeared a few day ago . Can anyone tell me what it's for and how to remove it thanks

    My ipad in top right corner has a picture of a padlock with w/ circle and arrow on one end of circle it just showed up a few days ago can anyone tell me what it is and how remove it thank you

    Rotation Lock
    Rotation Lock prevents the iPad display from switching between portrait and landscape mode. While Screen Rotation Lock is enabled, the following occurs:
    The display remains in landscape or portrait mode, regardless of how iPad is held.
    The Rotation Lock icon appears in the status bar.
    A padlock appears in the rotation lock button (viewable when you flick to the left on the recently used apps list, after double-clicking the Home button).
    http://support.apple.com/kb/ht4085

  • I have just updated my iphone4 to iOS 5 and unable to restore my back up. The error message that appeared was "an error occurred while restoring this iPhone (-50). Can anyone tell me what the problem is?

    . Can anyone tell me what the problem is?

    I have had the same issue since day 1 of the ios5 installation.  I always hit "Cancel" and then the iPad eventually shows up again in iTunes.  Then a few hours later, I get the same message again.  Annoying, but I've not found a way around it.

  • I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long.  I purchased a 3 banded AV extension but it doesn't work.  Can anyone tell me what the correct extension cable is and where I can find one?  Thanks.

    I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord.  I purchased a 3 banded AV extension but it doesn't work.  I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord.  Can anyone tell me what the correct extension cable is and where I can find one?  Thanks.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Hi people, can anyone tell whether one has the possibility in numbers, the entries in the pop-up menu to sort alphabetically me

    hi people, can anyone tell whether one has the possibility in numbers, the entries in the pop-up menu to sort alphabetically me

    Hi Dieter,
    Your profile shows Mac OS X (10.6.8) so it seems you are using Numbers version 2.x
    Numbers 2 does not have the ability to sort Pop-Up Menu entries (except by a painful process of adding or subtracting entries in Inspector).
    Numbers 3 makes Pop-Up Menus a breeze. But it is your choice whether to update to OS X Mavericks and Numbers 3 . Some features have been lost, other features have been added, and there are some workarounds.
    Have a look at these threads before you decide:
    Features that Apple has promised to reinstate:
    http://support.apple.com/kb/HT6049
    Hints on workarounds here:
    https://discussions.apple.com/message/23622372#23622372
    What has been GAINED in Numbers 3 is here:
    https://discussions.apple.com/thread/5473882?start=75&tstart=0
    What has been lost in Numbers 3 is here (with corrections where Apple has already reinstated some lost features in the Numbers 3.0.1 update):
    https://discussions.apple.com/thread/5470448?start=240&tstart=0
    Regards,
    Ian.

  • I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

    I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

    Unplug your iBook from the AC power, shut it down and take the main battery out for about fifteen minutes. Then you can put the battery back in, plug the power back in and restart. This should reset the USB and FireWire ports.
    If that doesn't help, you could reset the Power Management Unit. Follow the instructions in Knowledge Base Article #14449 for resetting your PMU.
    You probably should also startup from your Mac OS X install disk and run the Disk Utility to "repair disk" on your hard drive. This will determine if you've got some kind of file directory/software problems with the files on your hard drive.
    I'm not much at decoding kernel panic logs, but this line jumps out:
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.filesystems.udf(1.4.1)@0x28a79000
    Did you have a DVD movie in the drive at the time? DVD movie disks are UDF format, but not much else is.
    -Doug

  • I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

    I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

    Hello,
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Classic/OS9 Apps no longer supported.
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
    There are workarounds if the 867MHz CPU is the only hangup...
    http://sourceforge.net/projects/leopardassist/
    http://lowendmac.com/osx/leopard/unsupported.html
    So we know more about it...
    At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

Maybe you are looking for

  • Error invoking Web Service from Java client

    Hi I have created an ALSB Proxy service and exposed it as a web service. I have created a Java Client the code for which is pasted below:      String ENCODING_STYLE_PROPERTY = "javax.xml.rpc.encodingstyle.namespace.uri";      String URI_ENCODING = "h

  • File content  conversion-Document name

    Hi frndz,    i am using the file content conversion to upload the sale order details from flat file to r/3, am using the standard bappi for the same. Here my issue is in Content "conversion parameters" there is a parameter "Document name" usually i f

  • Garbage characters when using CR XI R1 with Sharp M350 printer PCL5e driver

    My application uses CR XI R1. We have a customer who has a Sharp M350 printer. When printing or previewing a report from my application with this printer set as the default, the text is garbled - the characters look like gibberish. If they change the

  • Begginer trying to make 2D to 3D moveie clip.

    I have watched some Youtube videos on making a 2D still picture into a 3D animation. I have a picture that I cut out 2 images from and filled in the background, but I can't get the images to stand out in 3D. Does Adobe or anyone else have a step by s

  • Query Areas on SQ01

    Hi experts, I am performing an upgrade from r3 4.6 to 6.0. On the new version; everytime we enter on the transacction SQ01 we have to change the parameter Enviroment/ Query Areas from value Global area to standard Area. Is there any way to set this a