Transferring a 20 minute video clip from DVD to Mac

Hi
I would loke to transfer an old 20 minute clip from a DVD to my Mac. How do I do this?

I'm assuming you have an external DVD drive. You can use Handbrake to 'rip' the DVD to your computer, assuming the DVD isn't copy-protected.
http://handbrake.fr/

Similar Messages

Is it possible to export a video clip from DVD player to iMovie '09?

If I load a homemade DVD onto my iMac using Disk Utility and then import either the entire disc or portions of the disc into iMovie, that works just fine. However I noticed that some clips are missing in iMovie, even though they are on the iMac in form of a .dmg file on the desktop. The same file that was used to import in to iMovie. If I look at this file using DVD player, everything is there, but some of these clips are missing in the event window. So I created a video clip in DVD player of those pieces missing in iMovie and now how can I get these into iMovie?

Hey, best way to import video from a DVD video disc for editing is to acctually have a simple video file. Use Handbrake or MPEG StreamClip to read the disc and create a video file off the video stream.
You could also set in and out points anc manually create several clips, which may help with playback and rendering for editing. I don't know how extensive you're going to get in your editing with iMovie...
Hope that helped.

Import video clip from DVD

Can anyone help me learn what I need to import video clips from my family video DVD's? I created the DVD's from tapes through Pinnacle Studio 8 (before becoming a Mac fan).
Thanks for any help you can give me,
Ann

Welcome to the  Discussion Forums.
My personal choice would be to edit them to a compatible format such as DV, you can do this with mpegstreamclip (free) provided you have the QT mpeg2 playback component installed (think it's $30), there are other third party software solutions, no doubt others will have their favourites.

Inport video clips from dvd

Hi
I like to know how to import video clips from a DVD? I tried and i could not figure out.
thanks

The VOB files must be demuxed.
When they are, there two generation losses involved.
If you edit and reencode to DVD, that's three generation losses.

Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

First: How are you exporting? Are you using the Share feature or Send to Compressor?
Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
Russ

Video Clips from DVD Player

While watching a personal DVD, converted from a VCR tape, I wanted to create & Save a clip.
I performed a set start time and set stop time, followed by "Add". I then named the clip.
Now I can't find the clip, which is supposed to be in my "clip collection". I haven't established a clip collection. Where would such a collection be established and later found? Thank you.

In order to edit a DVD you have to make another one, in other words: bring the video into iMovie, edit, and burn a new DVD.
You need to convert the VOB files on the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, as well as the the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Transferring video clips from iPad

I transferred MP4 (MPEG-4) video clips from a GoPro camera to my 1st gen. iPad. Now I am trying to figure out how to transfer them to my PC so I can edit them. I can watch them on the iPad, but when I try to view them from my PC they do not show up (the still photos do). Apple has not been any help. Any ideas or recommended software?
The files are too big to email from the iPad.
Thanks!

You could try whether apps such as Simple Photo & Video Transfer Lite (free app, there is also a paid version called Simple Transfer) work - they transfer via wifi, though I don't know whether they'll work for your clips.

How do i email a video clip from my iphone

How do i email a 6 minute video clip from my iphone

Open Photos > select video > tap forward icon (rectangle with arrow) > Email Video. If the video file is too large for your, or the recipient's email server, it may not get delivered.
You need this - it's all in there:
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
Message was edited by: modular747

Can not upload video clips from mini dvd

When I try to upload video clips from mini DVD recorded on Sony Handycam it stats the files are read only. I have tried finalized and un-finalized clips.

golfer709
Thank you for the reply.
Although what I posted in my post numbered 2 is interesting and useful information in the Premiere Elements ripping of VOBs from DVD-VIDEO, it is not answering your issue regarding a "read only" issue and did not target your specific "read only" message. Sorry about that.
The VOBs are typically read only files on the disc.
I have never run into a "read only" issue with regard to the Premiere Elements 10 Windows 7 64 bit Add Media/"DVD Camcorder or PC DVD Drive"/Video Importer. For that matter, not with any version of Premiere Elements with this particular feature.
When are you getting this message.
a. When you click on DVD Camcorder or PC DVD Drive after Get Media
b. When you click on Get Media in the Video Importer or other
Do you ever get a thumbnail for the VTS_01_1.VOB in the Video Importer? Is your burner drive recognized in the Source field of the Video Importer?
If you open and explore the DVD disc, go to the VTS_01_1.VOB in the VIDEO-TS Folder, go to the VOB's properties, can you remove
the mark next to "read only" and then have the Video Importer route work for you?
Also, if you copy the VTS_01_1.VOB from the opened DVD disc and paste it to the computer desktop and remove the "read only" marking, can you then import
the VTS_01_1.VOB into Premiere Elements with its Get Media/Files and Folders?
ATR

HT4061 I have video clips from a stills camera on my computer. When I sync my iPad to my computer and ask for the photo files to be transferred (including videos) it does not transfer them

I have video clips from a stills camera on my computer mixed in with still pictures in various files. When I sync my iPad to the computer and ask for the files to be transferred to the iPad the video clips are not included (even when I tick the box to include videos). How do I rectify this.

How to use your iPod to move your music to a new computer

How can I capture video clips from you tube or my own DVD's

How can I capture video clips from my own DVD's or You Tube type of media, I am trying to create a presentation using Key Note

As long as you are using the clips with copyright permission (the organisation I work for has this for some distributers) try Wondershare (I am sure other converters are available). You can install an extension for Safari (I use FastestTube 2.2.9.3) to download from YouTube. However, please be aware that you could be breaking copyright laws when so doing.

How do I import video clips from iPhoto if it doesn't recognize the video clips in iMoive

I'm trying to make a movie using iMovie and I recorded some clips using a Sony Digital Camera and iMovie won't let me upload the video clips from iPhoto. I try to import them but when i try to click on the file, it won't let me. Like its not bold like other files (It will let me upload video that were taken with my iPhone) I have iMovie 09.
What do I need to do?
Thanks!
Ayca

Do you plan to put each video clip in iDVD to be playes separately? If so then here's how:
1 - open iDVD and select your theme.
2 - click on the Media button at the bottom right and then on the Photo button at the top.
3 - in the search window type in ".mov" (or the extension of the video clips you plan to use).
4 - all of the video clips with the extension you entered will be displayed and you can drag them into the menu area at the left.
Another way would be to put all of the video clips in an Album and click on that album to view and drag the clips:
Remember, the order that they are added to the menu will be the order that the buttons will highlight when you scroll thru the buttons with a DVD player remote.
This will give you a menu with a separate button for each video clip (up to 12 in a menu with some themes).
If you want to play all of the clips one after another you could create a slideshow in iDVD with the "+" button at the bottom and drag the video clips into the slideshow as you would still photos. Set the slide duration to anything but manual and don't apply any transition.
That will let you play all of the clips sequentially.
OT

I took a 15 minute video clip on my phone and now I can't import it into iphoto. I've been able to import clips to iphoto in the past. How do I fix this? How can I get it imported onto my MacBook and ultimately iMovie?

I took a 15 minute video clip on my phone and now I can't import it into iphoto. I've been able to import clips to iphoto in the past. How do I fix this? How can I get it imported onto my MacBook and ultimately iMovie?

Maybe try one of the WiFi transfer Apps? There are several to choose from. I use Photosynch quite often to send photos and videos between my computer(s), my iPhone, and iPad.

Problem importing video clips from Panasonic SDR-S10

Hi, can anyone help? In iMovie I try to import my video clips from my Panasonic Camcorder SDR-S10 and it shows clips there, but when you click on them the clip icon disappears. Try to import and it doesn't import anything? Any ideas.
Anyone know a workaround for importing clips from this camera I get a lot of problems with a Mac when using this one.
Thanks
Hayley

I have the same camcorder and have used Visual Hub to convert the .mod clips to .dv files which work just fine with iMovie. You can try out Visual Hub for clips less than 2 minutes in length in the trial mode. I think it costs about $20. Also, I've heard you can buy an mpeg2 plug in for Quicktime Pro that will let you use those files. I think that is also about $20.
Also, search the apple discussions for ".mod" and you'll find a lot of other similar questions to the one you asked.
Hope this helps.

Transferring a 20 minute video clip from DVD to Mac

Similar Messages

Maybe you are looking for