Transferring a Document w/ an Outline to a "Doc."
I am using the Harvard outline in my document. When I save a copy as a "doc.," however, all of the outline numbering disappears. Is there any way to have to Harvard outline numbering present when opening the pages document as a "doc."?
The English word is "solution" Yvan.
Peter
Similar Messages
-
Error while transferring the document
Hi Friends,
We are getting an Error when we try to create a service confirmation.The error is an 'Error has occurred while transferring the document'.When we see in the transmission log it is telling inconsistent update flags.
How can the error be removed?
Regards,
Jay.Hi Jay,
Try doing this once again and go to Tcode SMW01 and try to locate your Bdoc. First it will be in yellow state and it will turn red (error).
Once you get the error Bdoc, check the error messages in it (there is proper button on the top to get this). You might get the cuase of the error in Bdoc messages itself.
If not, post me the Bdoc status and the Flow Context.
Regards,
Alin -
I TRANSFERED APPLEWORKS DOCUMENTS FROM AN eMAC TO A NEW IMAC AND CAN'T OPEN THEM. THE MESSSAGE STATES THERE AR NO APPS GO TO THE APP STORE. WHAT DO I NEED TO PURCHASE OR GET? I'M NOT A COMPUTER GUY BUT I WANT MY RECEPIES AND STUFF. HELP
Welcome James!
For no cost, you can try the open-source productivy suite LibreOffice. I don't have any AW files here to test but there are reliable reports that LibreOffice can open at least some AW files:
http://www.libreoffice.org/discover/libreoffice/
Please turn off your caps lock key. All-caps text is harder for us to read and is considered "shouting" or "anger" by most internet text conventions. Thanks! -
Short dump in queue while transfering billing document to the ECC.
Hi,
While transferring billing document to ECC we got the error SYSFAIL and The running application consciously caused an abort.
please find the attached ST22 dump and do the needful. Please give th mail id i will send dump.
Information on where terminated
Termination occurred in the ABAP program "SAPLCOINT_TP" - in
"COINT_TPOST_IT_INSERT".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 92
of the (Include) program "LCOINT_TPU03".
62 EXPORTING
63 T006_MSEHI = I_MEINH
64 EXCEPTIONS
65 NOT_FOUND = 1.
66 IF SY-SUBRC = 0.
67 LS_COINT_TPOST_IT-MEHT = I_MEINH.
68 ENDIF.
69 LS_COINT_TPOST_IT-BETRG = I_BETRAG.
70 LS_COINT_TPOST_IT-CURRENCY = I_CURRENCY.
71 * Additional data
72 LS_COINT_TPOST_IT-MANDT = SY-MANDT.
73 IF NOT I_DATE IS INITIAL.
74 LS_COINT_TPOST_IT-BDATE = I_DATE.
75 ENDIF.
76 LS_COINT_TPOST_IT-REVERSE = I_REVERSE.
77 LS_COINT_TPOST_IT-VORGNG = COINT_BILLING.
78 * Derive BUZEI
79 SELECT MAX( BUZEI ) FROM COINT_TPOST_IT INTO LD_BUZEI
80 WHERE GUID = I_GUID.
81 * begin insert note 1003536
82 SELECT SINGLE * FROM COINT_TPOST_IT INTO LS_COINT_TPOST_IT_OLD
83 WHERE GUID = I_GUID
84 AND BUZEI = LD_BUZEI.
85
86 CLEAR LS_COINT_TPOST_IT_OLD-BUZEI.
87 CLEAR LS_COINT_TPOST_IT_OLD-TIMESTMP.
88 CLEAR LS_COINT_TPOST_IT_OLD-PROCESSED.
89 CLEAR LS_COINT_TPOST_IT_OLD-CHANGED.
90
91 IF LS_COINT_TPOST_IT = LS_COINT_TPOST_IT_OLD.
>>>>> MESSAGE TEXT-X01 TYPE 'X'.
93 ENDIF.
94 * end insert note 1003536
95
96 ADD 1 TO LD_BUZEI.
97 LS_COINT_TPOST_IT-BUZEI = LD_BUZEI.
98 * Get TIMESTMP
99 PERFORM GET_TIME_STAMP CHANGING LD_TIMESTAMP.
100 LS_COINT_TPOST_IT-TIMESTMP = LD_TIMESTAMP.
101 * Update COINT_TPOST_HD
102 IF NOT LD_INSERT_HD IS INITIAL.
103 CALL FUNCTION 'COINT_TPOST_HD_INSERT'
104 EXPORTING
105 I_GUID = I_GUID
106 I_OBJNR = LD_OBJNR
107 I_KOKRS = LD_KOKRS
108 I_DATE = LS_COINT_TPOST_HD-BDATE
109 EXCEPTIONS
110 OTHERS = 3.
111 ENDIF.
Best Regards,
PrakeshHi,
Can you plz help in my issue .
Dear Gurus,
Find the below scenario followed by us.
1.Created the service order with the ZSR3 procurement item category.
2.PR created for the service order 35035201 in ECC with no 0070088937.
3.One queue is struck with the below details.
4.If we re process the queue it will process with out any error and then only our document flow of the CRM service order line item.
Plz check the queue name R3AD_CRM_SRV_0035025201 in CRM system from
Tcode SMQ2 which is in SYSFAIL status. The corresponding BDOC in SMW01
tcode has validation error message " Module CRM_SRV_EXT_VAL, BDoc type
CRM_SRV_XTN. Message no. SMW3018 " . Plz advise.
As per my understanding and debugging i think it might be a issue
As a standard CRM any change/update in ECC document 0070088937 should
send back the information to the source CRM document with header GUID
4E6527B4D3070C10E10080000A8C6828 . But system is referring to a
different GUID where there is no document exist in CRM.
Pls find the root cause to trigger different GUID when information is
passed from ECC to CRM system.
Best Regards,
Prakesh -
Problem in transfering the Document from CRM to R/3
Dear CRM Experts,
I am working in CRM 2007.
we connected the CRM 2007 with R/3.
In CRM we creating the Service order -> Service Confirmation -> Return Order.
When we create the Return Order in CRM it Copies the Document and creates the Same Return order in R/3.
But in our case it is not creating the return order in R3 and i am getting the Error message
"An error has occured in the system R22CLNT787 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
Object link not known in CO (Notification E IAOM 019)"
Please help me to solve this problem.
Thanks & Regards,
AshokWe had a similar error in transferring documents in the other direction, from R/3 to CRM. During the transfer, SAP carried out the following steps:
1. Transfer R/3 object to CRM
2. Create 1Order Object in CRM
3. CRM send BOR object (log sys, GUID, obj type) of 1Order Object to the R/3 object
4. R/3 attaches the BOR object under linked objects
5. R/3 sends a response with the success/failure of the operation in Step 4.
6. CRM receives the message and writes it to a log
We were missing Step 4. (We are using Case Modeller in R/3 FSCM Dispute Management, so we had to attach/activate the link between R/3 and CRM in that step).
Check CRM transaction SMW01 to see your message logs. Perhaps they will offer more insight.
Thanks,
Ben
We found that we were missing table entries in the -
Errors have occured while transferring the document into another system.
Hi GURUs,
Please help me to come out from this problem........
An error has occured in the system YDQCLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Refer to the attached log for error messages.
Transmission log
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Please suggest something ASAP....
i'll be highly Grateful to you.....
Regards,
AnkurHi Gangadhar,
Can you plz explain me elaborately, where should i check for partner function of the equipment and how this partner function is related to this issue.
I think partner function will be there only for BP. Can you plz clarify me.
Thanks in advance
Ankur -
While transferring my Documents from my desktop to my new Apple laptop through a memory stick all of my documents were lost. I cannot find them anywhere...What happened?
If I'm reading this right, you copied the Documents folder from your User account to a memory stick? How big was the Documents folder?
How did you carry out the copy?
Drag and drop from user account to stick? - This should copy the data leaving the originals on your desktop Mac.
⌘-drag from user account to stick? - This would move the files - copy them over, then delete the originals.
Entire folder at one go or a few files at a time?
Assuming that you used the memory stick as received (straight out of the pack) it would almost certainly be formatted FAT32 or even FAT16 so it can be used onWindows or Mac. There are file size limits with both those formats, which could cause problems, but I'm not sure complete loss of data would result. -
Transfering old documents and the helvetica bug
Is there any way of avoiding the helvetica bug when transfering old documents?
I have thousands of documents created on an I book power PC G 3, 500 MHz, OS 10.3 and AW 6.2.9. These have chicago script and when transfered to mac book 1.83 GHz, OS10.4 and AW 6.2.9, they now have helvetica text which I find difficult on the eye. It would a pain to individually change them to another text. There does not appear to be chicago text on the macbook. The AW on the I book was upgraded from clarisworks to the latest version but the AW on the macbook was a new version out of the box, then upgraded to 6.2.9.
I aplogise in advance because I think this is question may already be answered but I couldn't find it in discussions.
Eamonn LimHi Eamonn,
I think the key line in your post is this one:
"There does not appear to be chicago text on the macbook."
If that;s the case, then what you're seeing may be font substitution, rather than the Helvetica bug. This could be good news or bad.
If you still have your iBook G3, you may be able to transfer the Chicago font from it to your MacBook. If that's possible, If the MacBook recognizes the font, and If it's not the Helvetica bug, just having the font avbailable should cure the problem.
The bad news? If any of the three conditions above aren't true, you may be stuck with changing them individually.
Even the bad news isn't all bad though, if are set entirely in Chicago. You'll only need to change each document once, and won't need to change it at all until the first time you open it.
Open the document, press command-A to Select All, choose the new font, click anywhere to deselect, then Save the document. Then carry on with reading the document.
If it IS the dreaded Helvetica bug, a search of the forum on "helvetica" will bring up instructions on solving.
And I suspect it's possible to do a batch change of the documents' fonts using an AppleScript, if the 'do as needed' approach doesn't fit your needs.
Regards,
Barry -
I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.
Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara -
"Can I select only one page from a PDF document to convert to an excel doc. ?"
"Can I select only one page from a PDF document to convert to an excel doc. ?"
No, so extract one page, then convert.
-
ME013 Document type RD33 not allowed with doc. ca tegory B
When I try to post an SC, i get the following error: ME013 Document type RD33 not allowed with doc. ca tegory B. I am on SRM 5.0. I have maintained config (V_BBP_TARGET_OBJ) to create a PO if info complete and I have set up BSA in the org structure as ECPO. My SC has a source assigned and looks to be complete, yet the system seems to want to create a PR and it is having difficulty doing so. Any idea on how to troubleshoot this error message?
Hello Richard,
I guess RD33 is a PO doc type in your R/3 system.
In that case, that means your SC tries to create a PR, but with the PO doc type RD33.
But you said that you defined BSA = ECPO. So where comes RD33 from ?
Can you tell me what is RD33 in your R/3: PR or PO doc type ?
And if you have any reference to RD33 in SRM ?
Rgds
Christophe -
today i open page in my iPad there is no my old document at all just 6 newly doc in my iCloud. what happen?, today i open page in my iPad there is no my old document at all just 6 newly doc in my iCloud. what happen?
SonOfTheSouth wrote:
Also, unwanted down volume change, by pressing of the volume button, can happen in many ways such as in a pocket, carrying it in your hand, passing the phone around, lots of ways.
As far as the phone is locked, the volume key will not function .. so this should not affect the volume level.
SonOfTheSouth wrote:
I'm ranting about it to you fellow Lumina users. If you experience this, if it bugs you, if you agree that it's more than a mere tech glich nuisance, that it's causing missed calls for family and business, then please post in on this Lumina Community and demand a fix for it.
This being a User-to-User forum, what you suggest may not have the indended effect. But, you may add your vote HERE to the most appropriate 'feature request' .. -
Hi All,
I have a Macbook Pro, 5,5. It's a few years old and was running slow. My son backed up my Microsoft Office documents and my photos onto a thumb drive and ran 'wiped my computer clean'...using a disc that came with my computer. (I am NOT computer savy at all).
I was able to reinstall the Mac OS X install DVD that came with my Mac, but IPHOTO, ILIFE did not reinstall. I transferred the word documents successfully, and my photos transferred to an icon on a 'library' on the desktop, but I can't use. How do i get IPHOTO back?
Any info would be greatly appreciated.Thank you so much for responding. I will look for the other disks.
One more question - I initially decided to do this because my Mac kept opening with the date changed to 2008, and I keep having to re - enter my Web key. In addition, it was running much slower. Since I 'cleaned' everything out, I thought all would work perfect. This morning, the date changed to 2008; again AND it again asks for my Web key. Does this mean my Mac has reached it's almost end or could I have a 'bug' on it?
Again, thanks so much for your suggestions. -
I transfered all the fcp document files to my windows desktop computer over the network to free up some space on my mac, thinking I would be able to use the files later on on my mac thru the network. The files aren't shown in fcp file types but in exec, it wont open using imovie or final cut pro. Just wondering if there's a way to make it work. In another words can u use a windows computer to store fcp document files and then access it from a Mac over a network?
Mac OS X (10.3.9)For A, that's what you do when you install your PC. I think (but I'm no PC expert) there is a utility to convert from FAT32 to NTSC available in Windows.
For B, I think it's available in server or pro versions of Windows, but I'm not sure.
For C, try Connect to server in the Finder and type: afp:/at/YourPCname
You can also try: afp://YourPCdnsName
Or your PC's IP address (not this address): afp://123.21.43.12
Once you got your files back on the Mac, you can fix the destroyed file info with my File Fixers:
http://www.berga.nu/~usrlt/imovie/index.html -
How can I stop pages from wanting to make every document into an outline?
Every time I try to create a document in Pages, it insists in turning it into an outline. How do I type a staright document?
Have you tried starting from a different template?
As far as I can tell the Outline setting is contained in the document, so this should only happen if you are starting from a template that was saved with Show Document Outline selected.
Maybe you are looking for
-
Firefox crashes on my desktop, how can I get on my internet??
I have tried safe mode and everything else. Can't do much without interenet access. Can I delete firefox and get on my computer??
-
Hi, Inside of a stored procedure I created: - a record type:TYPE gr_rec IS RECORD (contact_id number) - a table of records: TYPE gr_tb IS table of gr_rec INDEX BY BINARY_INTEGER and then I populated the table in a loop: tb(i).contact_id := a.contact_
-
Hi, while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine. ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF serv
-
Playback of canon camcorder on ipad2
How do I playback my camcorder on ipad2? I have it connected using hdmi
-
Hello all - Surprisingly I couldn't find this in searches on the forum, so looking for input. I've got an external monitor hooked up via firewire through an HDV deck. There's the expected sound delay (about 5 frames), but how do I get rid of it? Can