Transferring contract from SRM to R/3

When I trigger a contract from SRM to R/3, then
1) If there is no material code in BID then, while transferring account assignment gets changed from K(cost centre) to U (unknown).
2) If there is material code in BID then account assignment category comes as blank henceforth contract does not get made and throw an error.
I am tranferring data by IDOC.
While if I make a PO from this bid then it works perfectly fine.
Pls. guide. Thanks
Parag
09881240969

Rajesh,
We are facing the same problem
Is your issue resolved, can send us the solution.
Thanks
Sanjay

Similar Messages

PI setting for transferring Contract from SRM to ECC - Classic scenario

Dear Experts
SRM 702
ECC 6.0 EHP6
SRM - Classic scenario
Need to understand PI setting for transferring Contract from SRM to ECC, as currently document Central Contract document getting created in SRM, but it is not getting transfer to ECC
No XML message getting triggered in ECC systm as well
can you help me in this
if any additional information needed, pls revert
Regards
Prashant K

Fully approve and release the contract. It will trigger the XML Message.
Go to https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_… and download the configuration guide & check the PI setting and required Software Components in PI.

SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

Hi,
We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
We have already configured XI content for MDM Catalog.
We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
Can someone pls help and tell me why is that happening??
Thanks in advance.
Regards,
Jasmeet

Hi Mausam,
yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
We have the Pre delivered content for XI from which we have set up the Interfaces etc.
This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
Regards,
Jasmeet

Creation of backend contract from SRM system?

Dear Experts,
I am bit confused with the scenario of creation of backend contract from SAP SRM system? It says in few cases, based on the BAdi 'BBP_DETERMINE_Logsys', the system creates a backned contract directly in a backend ERP system. Why do we need when we have central contract?
We can meet the same requirement through central contract where we will authorize only purchasing organizations of a backend system and block the contract for local sourcing in SRM?
Secondly, How to find a contract / scheduling agreement created in a backend system when a central contract is distributed to the backend system?
Thanks and regards,
Ranjan

Hello Ranjan
question on contracts?
Note 1476307 - Importing parameter not filled in BADI BBP_DETERMINE_LOGSYS
in classic scenario , The Business wanted to create a contract from cockpit or via BID
this BADI helps
Symptom
You have implemented BAdi BBP_DETERMINE_LOGSYS to control the system in which contract is created in following scenarios:
1. Creation of contract from an accepted quote / bid.
2. Creation of contract from a requisition in SOCO.
In the method IF_EX_BBP_DETERMINE_LOGSYS~CONTRACT_LOGSYS_DETERMINE of the BAdi implementation, importing parameter IT_ORG doesnot have any values.
Other terms
Backend contract
Reason and Prerequisites
some business wants to create a backend contract from SRM . see some Dinesh Powale / Claude threads for more understanding.
Muthu

Searching SAP contracts from SRM 4.0

Hi,
Does any one know what configuration needs to be in place if i want to search SAP contracts from SRM 4.0 in classical scenario. We dont want to copy R/3 contracts in SRM.
Would appericiate your response.
Regards,
MD

Hello ,
In classic scenerio the Backend Contracts will be available in the SOurce of Supply Tab in the Shipping cart screen.
System will propose the Contarcts from BE based on the Product Category in Shopping cart item.
Cheers,
Sid

XPath error while transferring products and contracts from SRM to SRM MDM 2

Hi experts,
I am getting the following error in SXMB_MONI (in XI) when I transferred contracts or products from SRM to SRM MDM. I have maintained xPath entries based on the SAP delivered note but still getting this error. Please help.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem when processing the XPath expression /nr1:CatalogTransmission/Catalog/CatalogContent/ItemList//Item[PropertyValuationList/PropertyValuation/PropertyReference[text()</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks,
Surya

Hi
Are u using any FCC parameters for file adapter?
If so don't do that. I tried with the same. You have to go with xml only. Otherwise there is some package related to that. you need to download.
Go to this note for more details.
SAP Note Number: 962165
Regards,
Pavani

Contract from srm to SAP R/3

I made a account assigned pr(with cost centre) in SAP R/3, then i transferred it to SRM, and made a bid in SRM, after all I selected one bid and triggered a contract in SRM so that contract gets made in SAP r/3.
Now the contract automatically picks account assignment as "U" while account assignment is mandatory for that material so it does not make a contract and gives error that account assignemnt mandatory for that material.
Basically account assignemnt data is not being picked up when i transfer pr feom R/3 to SRM.
So when I make a contract it also does not get transferred from SRM to R/3.
Pls. help and guide.
Thanks
9881240969

Hi Nacho.
Sorry the bad news, but account is not transfers from SRM to ECC or from ECC to SRM in contracts.
The Contracts goes between systems via IDOCs (BLAREL)
As you can see in transaction WE60, IDOC BLAREL02 has not account data.
Regards.
Raúl.

In PDP cycle is it possible to pull back transfered PR (from SRM to ECC)?

Dear Friends,
We are working on PDP cycle where backend ECC Purchase Requisition is transferred to SRM client via program BBP_EXTREQ_TRANSFER so that the procurement activity is carried out in SRM.
Now business decides to discontinue the procurement activity from SRM and continue in R/3 only. Which mean business would like to create Purchase Order in R/3 with reference to PR.
So we delete the shopping cart created in SRM and tried to change the Purchasing group so that system removed the procurement profile tag from PR. But system does not allow.
My question is, is it possible to pull back the PR from SRM to ECC after it has been transferred to SRM?
Or in standard process there is no provision to reverse the situation after a PR is transferred from ECC to SRM.
Can anyone through some light on this?
Regards,
Sandeep Parab

Hi Sandeep,
by standard there is no option to send Reqs back to ECC. A moved Req is
blocked in ECC with a flag in EBAN, that sourcing is carried out externally. This
block is removed, when the PO is created. I implemented a push back mechanism
with an extra button in the sourcing cockpit within a classic environment. The
button first takes the SC information and identifies the Req in ECC, sets the
status on blank and releases the Req for sourcing. Finally the SC is deleted from
the sourcing cockpit. With a good programmer the story can be quickly done.
Cheers,
Claudia
Please reward points for useful answers.

Distributing Central Contract from SRM to ECC

Hi,
We are using SRM 7.0 with ECC 6.0 in backend (no EHP). We're setting up a central contract with IDOCs. From what I read we have made the configuration:
in SRM:
- Assign attribute CT_PROC_TY = CCTR
- Connfigure new condition type PB00 which is the same with ECC price for contract
- activate the BADI BBP_DETERMINE_LOGSYS and coding it so for contract it will always go to backend (in method CONTRACT_LOGSYS_DETERMINE)
- I have activated BADI BBP_CTR_BE_CREATE but writing no code, as there no need for me to do mapping
in ECC:
- Activate inbound IDOC type BLAORD and COND_A and assign it to the logical system of SRM
Then I create the contract in SRM. but:
1. When creating contract, in item overview, i cannot tick 'distribution' indicator. Not sure what is the function
2. In item detail, tab distribution, I cannot put create release-purchasing org. Even when using search help it is not giving any value
Actually dont really understand the usefull of the indicator above, so I let it be empty, then I release the contract
The contract then not appear in ECC. I have checked SMQ1/SMQ2 nothing. Even in WE05 in ECC nothing. The only thing I see is in SLG1 where I see error triggered by user WF-BATCH with message "No recipient found"
Do i miss something in here? Any help will be very appreciated.
Josh

Hi Josh,
Central contract is only possible in SRM 7.0 with ECC 6.0 EHP 4. You can use local contracts or GOA.
Regards.

Transfer additional data together with a contract from srm to srm-mdm

Hi All,
I have a requirement to transfer additional data together with a contract, such as price scales, discounts, and discount scales
If the contract has condition like
scale Discount
0-10 20%
20-30 30%
from SRM to SRM MDM Catalog.
As a standard practice, we use report SRMMDM_CTR_TRANSFER in SRM to send the standard Contracts from SAP SRM system to the SRM-MDM Catalog repository via SAP XI.
But to transfer additional data , we have to use BBP_SAPXML1_OUT_BADI in SRM 7.0.
If any body worked on the same, please let me know the step by step procedure how to implement BBP_SAPXML1_OUT_BADI.
Regards,
Venkat

Hi Venkat,
You can have a look at the Note - 1296876
It gives the step - by -step procedure on what how to Enhance Contract Data Transfer.
For this, you may have to do the implementation in BADI BBP_SAPXML1_OUT_BADI
Change the XI mappings and the MDM Import manager mappings.
Hope this helps.
Regard,
Sherfu

Language conversion while transferring PR from SRM to R/3

We are using EBP 4.0 system
We have entered default langage english.
requirement is some users want the description in local language.
So the users are entering the text in local language and completeing the SC.But when the PR gets created in backend it just shows weird characters. We logged on even in the local language and checked.Still showing some weird characters.
Any idea what is to be done

Hi
Please specify the SRM and R/3 version details ->
<b>Seems like some bug in the system. (unicode/langauage issue)</b>
<u>Also go through the links as well -></u>
http://help.sap.com/saphelp_srm50/helpdata/en/9f/fdd13fa69a4921e10000000a1550b0/frameset.htm
Europe Languages work in Non- Unicode System
Re: Multiple Backends
Re: Language issue
Standard Code Pages in Non-Unicode System
Re: Upgrade from EBP 4.0 to SRM 5.0
http://help.sap.com/saphelp_srm50/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/11/395542785de64885c4e84023d93d93/content.htm
Do let me know.
Regards
- Atul

Transfering Products from SRM to CCM

Dear SRM Gurus,
I have executed the report "BBP_CCM_TRANSFER_CATALOG" in EBP. I got success messages " Catalog transferred". However in SXMB_MONI, I am getting error messages like " No implementing class registered for the interf
(ABAP interface, request message
CatalogUpdateNotification_Out, request message,
namespace http://sap.com/xi/EBP)" . I don't have any idea about this error.
Can some one guide, How can I proceed further?
Thanks & Regards,
Ramkumar

Ramkumar ,
Hi. CatalogUpdateNotification_Out is configuration on XI for the location of the XI server.
When you run report BBP_CCM_TRANSFER_CATALOG this sends the materials to the XI server, when then sends that back to the CCM instalation (on our system this is the same client/box as the SRM application). Once there the catalog can be published through the authoring tool to the respective catalog, or a report could run to send this out.
I would suggest looking at the config guide for CCM2 - it goes through what you need step by step.
Regards
Rob

Help with transferring Contracts from iPhone 4 to my car Phone Book

I have a new Toyota 2010 Highland Hybrid. I successfully connected my iPhone 4 to the car's bluetooth ~ i receive calls. I attempted to 'transfer' my contacts from my iPhone to the car's bluetooth Phone Book, but have not been successful.
HELP! has anybody been successful, and if so, what do I need to do.

It doesn't work in all cars. So, it may not in your Toyota. I have a Mercedes C300 (2010) and while the Bluetooth connection is terrific, my contacts don't transfer to the C300. If I had the upgraded Command system in my Mercedes, my contacts would transfer. So, you should check with Toyota.

POR not transfering from SRM to ERP

Hi Experts,
We are working with extended classic scenario on SRM 7.0 & ERP EHP4.
We are creating POR manually in SRM and also recieving POR from SUS system.
When we accept the POR it is not updating the ERP.
We have enabled the PI scenario for transfering POR from SRM to ERP by using the Proxy and IDOC(ORDRSP) but the XML is not generated when the POR is accepted.
Can any one help me how to transfer the POR created in SRM to ERP.
Is there any way we can generate XML message of POR with status Accepted.
Regards,
B.N.Karthikeyan

Hi,
I have tried this define event option.
Still XML not generated for POR.
Regards,
B.N.Karthikeyan

Badis for Central Contract Replication from SRM to ECC

hi
experts
i am working on a scenario of replicating the central contract from SRM 0.7 to ECC via XI/PI
let me know what are the Badis to be implemented in ECC for the Same
looking forward for your reply

Hi,
You do not need any Badi in ECC to distribute central contract to your backend system.
if your ECC system is on ECC 6.0 enpk 4.0 or more,
you can directly distribute your central contract from SRM to ECC system using standard ESOA services.
Thanks and regards,
Ranjan

Transferring contract from SRM to R/3

Similar Messages

Maybe you are looking for