Transferring DAQ name on new installation

Dear Labview forum,
I have an M-series USB DAQ.
I have built in Labview 8.0 an executible version of software to interact with the DAQ, plus an installation disk with a setup.exe program which installs my executible, a runtime version of labview, and MAX.
However, after installation on a new PC, when plugging in the DAQ, Windows XP must do its own additional hardware installation to recognise the DAQ and then one needs to use MAX to rename the DAQ from Dev1 to my more meaningful name. Is it possible for the installation setup program to complete these additional steps too so that after installation both the software and DAQ are ready for use?
This would reduce the setup complexity for the non-technical user.
Regards,
Jamie
Using Labview version 8.0

You can use the VI "MAX Copy Configuration.vi" to reload the configuration in MAX on a new system and save it on a development system.
You can use "File->Export" in MAX to export the system configuration to file.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Similar Messages

CHGRDBDIRE change rdb name for new installation.

In the installation guide, SAP advices us to change the *LOCAL relational database name to match the hostname.
However, currently my system already has an *LOCAL rdb name entry which follows the default machine/serial number name . The command using CHGRDBDIRE advised by SAP doesnt allow changing the name for *LOCAL entry.
The only method to change the name is to delete the default *LOCAL rdb name and recreate a new *LOCAL entry. Is it safe do to so ? IT contains the objects the QGPL and QTEMP schema now.

Hi kikco
no problem with that - I did this several times already ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

My Name and New Installs

My Name is {edited for privacy}
A neighbor behind me on DOOL COURT had a new install of Verizon done about 6 months ago and the Fiber Cable is still coiled up in MY yard. This cable should have been buried and properly attached the box that was REGRETFULLY installed in my yard. I pick it up every time I try to mow my lawn but next weekend, May 18th I believe that it will just lay there and I will HAPPILY mow over it and possibly chop it into pieces. There is NO reason why this cable is still cluttering my yard!!!
Get it fixed!! You got 6 days!!!
Sincerely,
{edited for privacy}

It has been 3 days since I submitted my IDEA of properly doing your job in a timely manner.
I see that IDEA has been removed!!!!
So the count down continues and there has been nothing done!!!!!
I will be mowing in 3 days!!!!!
Sincerely,
{edited for privacy}
you can't even fix the name!!! How long does that take???

Transferring iTunes account to new name

I just bought a new iMac Intel and a Mac Book Pro. I successfully transferred my iTunes libraries, but I have one problem/question.
With my purchase, I also bought an .Mac account for the first time. I have an iTunes account already, but would like to use the .Mac account for ITunes instead of the older account. How can transfer the authorization from the first account to the new account, and do I need to reauthorize the songs I have on my various Macs? I have two desktops (one is my wife's) and a laptop.
Thanks in advance!

You need to contact Apple here -> http://www.apple.com/fi/support/itunes/store/email/
"I just signed up for .Mac. How do I convert my existing iTunes account to my new .Mac account?
We'll be happy to convert your account for you. Please provide your old account name, your new .Mac account name and your billing address in your email. We will also need your explicit permission to reset your password to complete the conversion."

Can't open Raw files after transferring CS5 to my new computer

I just transferred cs5 to my new imac computer using my time machine backup. I now get a "photoshop does not recognize this file type" when I try to open a raw file from photoshop. When I try to open my raw files through bridge I get the message "you do not have permission to open the document. I have checked my permission preferences and have reading and writing permissions and updated to 6.7 ACR. I dont know what to do next?

Curt,
I have an imac OSX 10.8.2. So is the application folder the correct location for the CS5 folder? There is a lot of unclear information about this out on the web.
Everything I loaded today has a CS5.1 name to it. I assumed that it was an updated version from my original CS5? If I click on the CS5 folder located in my user file it opens photoshop (probally means its not uninstalled... hum). I cant access it through utilities/adobe installers/uninstall CS5. So maybe I should do the Script cleaner like you mentioned? Or maybe CS5 and CS5.1 are the same program like you mentioned?
When I follow the path to camera raw you mentioned I get to a photoshop raw "pop up" but ACR doesnt open up. Are you asking for me to locate the Camera Raw plug in folder or look for multiples of the file inside my plugins folder? Their isnt a ACR file in my CS5 file that I found in my user folder or the CS5.1 file in my applications folder. Where would I typically find it? Im having a hard time finding it at all.
Im on my 2nd day of troubleshooting and Ive read so many articles and help threads. Ive had a call back order requested from adobe... Im still waiting 3 hours later. Im afraid they might just reject my request for help since I dont have CS6. You have by far been the best help Ive found. Thank you very much! If you can think of anything else to resolve this please let me know. Im so frusterated at this point... trying to be positive though, Im learning alot.
Jennifer

"Untitled" as default document name for new documents

I have one installation of Adobe Illustrator CS2 in a Mac with which I have the following problem:
Whenever I go to File->New, to create a new document, the default document name is blank, and it should be "untitled".
Is there a way (without reinstalling) to correct this? (turn the default blank document name to "untitled" default document name, for new documents)
Thank you.
Juan Poniachik

On what Mac? If it's on a new Mac with Snow Leopard, I would guess it is one of those compatibility issues of new OS vs. legacy software. If so, you can't change any of that. Other than that I can only think of trying to edit the document templates...
Mylenium

How can I copy a custom workspace to new installation? CS5 PC

How can I copy a custom workspace to new installation? CS5 PC
Must be a prefs file somewhere?

It'll be in this list somewhere
Preference file functions, names, locations | Photoshop CS5

Problems with new installation of iAS on Windows

This is a new installation of iAS 10.1.2.0.2 on Windows. The application server doesn't come up properly after reboot. The log file D:\Oracle\ora101_infra\opmn\logs\OC4J~OC4J_SECURITY~default_island~1 contains an error stack that begins with:
SSO: DB Error. Please make sure the database is available and restart SSO Server
Obviously, the database (service name OracleServiceIAS472F) is started after the rest of the services (service names similar to Oracleora101_XXX). I have found documentation on how to make the ProcessManager service of the OracleAS Infrastructure before it starts up the ProcessManager service of the middle tier, but no notes on starting the database service in an order different from Windows default. Extensive googling doesn't give me that others have had similar problems. I would like to verify before starting to mess around with the order of services starting at boot time.
The person doing the installation (I don't have direct access to the machine) maintains that installation of WebUtil is causing these problems, and that the problems disappear if he reverts the configuration of WebUtil. I have limited experience with forms configuration and cannot see the connection.
Any input would be greatly appreciated!
Regards,
Maria

Maria, we have numerous installations of both 10gDB 10.1.0.5/10gAS 9.0.4.2 and 10gDB 10.2.0.3/10gAS 10.1.2.0.2 here. The environments are all two server configurations: 1 server has DB + AS Infrastructure, 1 server has AS Middle Tier. I have not had an issue with a DB server reboot causing the Infrastructure to not come up, although we have a strict rule of always rebooting these two servers in pairs: first DB then AS Middle Tier. And since there are gazillion MS patches, they do get rebooted frequently. Regards, John

Mdadm boot slow to assemble drives with newer installs

I had a problem where my raid1 installs from this year would pause about 5 seconds per mdadm entry yet my old installs from March 2014 would go through all 4 mdadm entries in less than a second. After fussing for a long time on the new installs I finally broke (slowed) one of my old installs which immediately revealed what the problem was.
I didn't forget to pick partition type FD or FD00. I have my install sequence in a text file so I rarely forget things. I install through PuTTY pasting all the way so it's fast and mistakes are rare.
devices of the form /dev/md/* take about 5 seconds to create.
devices of the form /dev/md{0..127} create very fast.
"mdadm -E --scan" always creates devices of the form /dev/md/{0..127}. In the past I was very meticulous about fixing the device names to the more compact form. I never missed so I never found out there was a substantial speed difference. I just like the the more compact look of /dev/md1 in my boot menu. Eventually I progressed to UUID and LABEL but persisted with the compact form. Then I discovered "mdadm --name" so I left mdadm do it's own thing. What could possibly go wrong?
I also noticed that the mdadm instructions changed from using "mdadm" to "mdadm_udev". mdadm_udev seems to assemble faster than mdadm.
To fix, boot once to see if you're slow, fix any usage of /dev/md*/* in your boot scripts or fstab, fix the form in /etc/mdadm.conf, and mkinitcpio...
I still see that the new installs pause at udev more than old installs, but instead of 20s vs >1s, it's now 5s vs >1s, which is much better.
Looking further I compared mkinitcpio.conf and noticed that autodetect is now installed by default. I took that out and though my list of drivers went way down the pause didn't change. Then I compared "lsinitcpio -a /boot/initramfs-linux.img" and I saw that fsck.zfs was loading so ZFS being a data drive only I uninstalled it and remade mkinitcpio. The pause didn't change.
Now "lsinitcpio -a /boot/initramfs-linux.img" and "lsinitcpio /boot/initramfs-linux.img | sort" compare the same yet the pause remains. I know something is lying because the slow pause computer has a SAS controller and the fast pause computer doesn't, and I know that I must remake mkinitcpio when the SAS controller brand changes or it won't boot without Fallback. The mptsas driver is hiding in there somewhere. So then I unpack both initrd files and by-content compare all files with Total Commander.
Only one difference: mdadm.conf
I can't boot without the SAS controller so I can't check to see if that's the source of the pause. I suspect it is because I can see the NumLock blink halfway through the pause and I know the SAS controller isn't concerned with that.
To solve this quandary I made a quickie install on a SATA only computer. I used the fast form of /dev/md* in mdadm.conf and left autodetect in mkinitcpio.
It's fast, but there's still about a half second pause right there at udev. Out goes autodetect. Still about a half second.
Then, back at the slow pause computer, I swapped the Marvell AOC-SASLP-MV8 for the LSI SAS2008 9211-8i. See Zorinaq for what makes this possible. The pause at udev dropped to about 1s which is only a bit slower than SATA. Not really a win since the LSI BIOS boot takes much longer. The good news is that I didn't need to rebuild mkinitcpio to change controllers. autodetect is toast and I get one more degree of freedom!
I guess that's as good as it gets. Fortunately the mdadm --name option doesn't create /dev/md/* entries so I don't need to fix that.
The Internet is strangely silent on this issue. I guess you're all just used to slow boots with mdraid.
This is a bug and needs to be reported. Either mdadm scan needs to stop producing the slow form or needs to make the slow form fast.

severach wrote:I didn't forget to pick partition type FD or FD00.
I wouldn't use this partition type anymore. (raid autodetect is deprecated)
severach wrote:Then I discovered "mdadm --name" so I left mdadm do it's own thing.
mdadm --name never worked well for me. I don't see many people using it.
I prefer a minimal mdadm.conf that only specifies the md number and UUID.
ARRAY /dev/md0 UUID=627125a5:abce6b82:6c738e49:50adadae
I don't notice any delays but, in my case the raid is assembled in the background while in the foreground LUKS is waiting for me to type a passphrase.

Oracle Portal 11g - New Installation

Hello,
I have worked a lot of with IAS 10.1.2.3. Now I want to install Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0). But I need the Portal for my old applications.
I have found the document 1364497.1 "New Direction for Oracle Fusion Middleware 11g with Single Sign-On 10g". In the document is a section "Oracle Portal 11g - New Installation" from 23-MAY-2012. This describe in Part 1 that I have to install the Infrasturcture of Oracle Identity Management 10g (10.1.4.0.1) . But I can't find the needed sources in the given donlaod path (http://www.oracle.com/technetwork/middleware/ias/downloads/101401-099957.html).
I found only Oracle Identity Management 10g (10.1.4.3). This version seems to me does not have an Infrasturcture.
I don't know which sources I have to download to install the temporary needed Infrasturcture. Can anybody help to find the right sources?
Thanks,
Frank

Hi Frank,
I'd prefer to get the document published first. Also a few comments with regards to the OAM installation path.
The benefits are :
<li>You will be using OAM straight from the beginning, no SSO in the picture
<li>You can install Oracle Portal with an 11g OID instead of a 10g OID (which you would get when installing IDM 10.1.4)
<li>You can use an 11.2 database for both the Portal and OID repository. With IDM 10.1.4 you are restricted to an 10.1 or 10.2 database as the installer does not support 11g.
There are some drawbacks as well :
<li>There will be no DAS solution (oiddas). Both User/Group creation should be done with different tools (ldif files, dbms_ldap API, provisioning from a 3rd party LDAP server) as well as User and Group LOVs in the access tabs of several Portal components won't work. You can still enter the name of the user and group in the input field to grant privileges
<li>The seeded login portlet does not work
Thanks,
EJ

1434891 - Consolidation fails in BOFC 7.5 (new installation)

Hello,
maybe someone can help me. There's a error in the consolidation of my Business Objects Financial Consolidation application:
Failed to run database query:"..
The SAP recommended solution (1434891 - Consolidation fails in BOFC 7.5 (new installation) is:
Force the migration
1. Increase the version in the WTCVERSION database table.
2. Migrate database via CtAdmin console.
What are the required entries in the WTCVERSION database table?
Best Regards

Hello Udo,
the question was answered by SAP. For our settings, we run a script, which solved the problem. Please contact SAP. In our case the script was:
Your issues are due to the fact that the ct_datasource_dim row is missing in your database.
In order to insert the missing row, you can run the following script:
IMPORTANT: Before running these queries
- please make sure you have a recent backup of your 7.5 database.
- stop the data source.
Then run the following script :
if not exists (select * from ct_datasource_dim where datasource = -524286 and dimension = -524233)
insert into ct_datasource_dim (datasource,dimension,nullable,optional,aggregatable,header,header_rank,particular,hidden,interlaced_with,phys_name,ct_order,detail) values (-524286,-524233,1,0,1,1,7,0,0,0,N'eversion',23,0);
BEGIN
DECLARE @tablename_xxxx varchar(50)
DECLARE @sqlAddColumnQuery varchar(100)
DECLARE tables_cursor CURSOR FOR
SELECT name FROM sysobjects
WHERE type = 'U' AND (name LIKE 'ct_pc____') AND NOT (name LIKE 'ct_pc_entry') AND NOT (name LIKE 'ct_pcdref') AND NOT (name LIKE 'ct_pcref')
OPEN tables_cursor
FETCH NEXT FROM tables_cursor INTO @tablename_xxxx
WHILE (@@FETCH_STATUS <> -1)
BEGIN
IF NOT EXISTS (select 1 from syscolumns where name = 'eversion' and id = (select id from sysobjects where name = @tablename_xxxx))
begin
select @sqlAddColumnQuery = 'ALTER TABLE ' + @tablename_xxxx + ' ADD eversion INT NOT NULL DEFAULT 1'
exec(@sqlAddColumnQuery)
end
FETCH NEXT FROM tables_cursor INTO @tablename_xxxx
END
CLOSE tables_cursor
DEALLOCATE tables_cursor
END;
update ct_pc_entry set historic_status = 0 where historic_status is null and status = 0;
update ct_pc_entry set historic_status = 1 where historic_status is null and (status = 1 or status = 2);
Please do not forget to make a recent backup of your database before running this script.

I transferred CS5 to a new computer using PC transfer program. CS5 started up on the new computer OK, but now does not recognize raw files. Should I uninstall and reinstall again?

I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly. I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?

Transferring programs does not work well with Adobe applications. You should install them.
As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space.

Transferred files to a new MacBook Pro, but I don't see my old iPhoto library!!

I recently transferred all my files from my 2008 MacBook Pro 15" to my new 2010 MacBook Pro 15" (with a firewire). As far as I can see everything has transferred, except for my iPhoto library. When I tried to look for a photo it was completely blank and iPhoto asked if I wanted to create a new library. I also have a Time Capsule which all my files from my 2008 MBP should be backed up on, but I can not find them!! I'm seriously going to cry if I lost the last 5 years of my photos and videos!! PLEASE HELP!!
THANK YOU!!

Download and use Find Any File to search for a file named "Library6.iPhoto". It's a file that exists in every iPhoto library regardless of what the library has been named. If you find more than one you can open them to see if the other library has your photos.
If there is only one library make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Tmxgta, a new installer including the guide in ncurses

tmxgta, a new installer made for comfortably reading instructions alongside your terminal.
The included guide covers the complete archwiki page "Beginners' Guide/Installation".
Everything is written in bash, and is licensed under GNU Free Documentation License.
Instead of showing a wall-of-text information is split up into sections. Read helpful information about your setup like partition layout and mountpoints. There is no need to switch virtual consoles and remember long commands. This is achieved by splitting up a virtual console into two windows using tmux. If you are familiar with tiling window managers you will feel right at home.
Features:
* non-destructive, does not overwrite anything
* complete content of Beginners' Guide/Installation
* dialog for displaying text
* progressbar
* load keymap from menu
* colorful markup of commands
* reflector for sorting mirrors with one keypress
* shows network interface names
* shows partition layout and mountpoints
* list of timezones and keymaps
* guide for UEFI autodetection of kernels
* ~2000 lines for scrolling saved in terminal
* all archiso features
Screenshot:
More screenshots
Download:
Download the latest iso release from Sourceforge:
https://sourceforge.net/projects/tmxgta … rce=navbar
Architecture:
tmxgta.iso is now working on x86_64 and i686 architecture.
The image can be burned to a CD, mounted as an ISO file, or be directly written to a USB stick using a utility like `dd`.
See the following links.
https://wiki.archlinux.org/index.php/Be … ion_medium
https://wiki.archlinux.org/index.php/US … tion_Media
Keyboard shortcuts:
There are only two keyboard shortcuts you need to know:
control-a + control-a : switches from the terminal to the guide and back
control-a : go to copy mode for scrolling up and down with the arrowkeys
or pageup / pagedown
Run tmxgta:
There are two possibilities to run tmxgta, it is recommended to download the .iso file.
Or get the script on github.
Known limitations: Looks bad on very small screens as in 600x800 pixels. The script is set to run only if 120 columns or more are available. Check 'tput cols' in the kernel console.
Thanks for reading and testing. Please submit bugs and your ideas on github or in this thread.
Last edited by teateawhy (2013-06-01 13:48:08)

The new iso 06-01 is released, including updates from the beginner's guide. There is now a menu to select from various options for wireless network configuration. ( wifi-menu, netctl-profiles, netctl-auto). Also you can use the mouse for copy-pasting commands (with gpm), if you have a usb-mouse.
HalosGhost wrote:I have to say, you should really throw a PKGBUILD together for this.
I don't think a PKGBUILD is all that useful, because this is about arch installation, whereas the aur is primarily used after installation. That said, if somebody wants to create a PKGBUILD, you are welcome.
mhertz wrote:Well, the standard iso dosen't have a problem either with you opening a new vt and firering up elinks on the arch wiki
Still, it's nice imho to have tmux available in the iso, which I also myself add to my own archiso-made rescue/install iso's... That and vim of course...
Only works with internet connection. With tmxgta it is no problem to read how to use netctl etc. without having internet connection.
I plan adding vim, if it does not take much space.
HalosGhost wrote:Obviously, this is just my opinion (and I have no idea what the Arch devs would think about this), but this may actually be a viable candidate to become a default installer.
I think it is a good idea to keep both iso seperate for the moment, so i have more room for changes.
fakedrake wrote:How far/realistic is the possibility of some of these features moving to the mainline iso?
I want to second tomk, please make a very specific bug report, or just use tmxgta instead.
Thank you for your ideas so far.

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

Transferring DAQ name on new installation

Similar Messages

Maybe you are looking for