Transferring Data from Hierarchy

Hi Experts,
We have a complex bespoke hierarchy in system, consisting of several/different levels of granularity. Hierarchy looks like as follows:
- Root
-- Level 1.1
----Level 1.1.1
------Level 1.1.1.1
Leaf 1
Leaf 2
------Level 1.1.1.2
Leaf 1
Leaf 2
----Level 1.1.2
Leaf 1
Leaf 2
Leaf 3
----Level 1.1.3
Leaf 1
-- Level 1.2
Leaf 1
Data is posted on Leaf level so that in queries it can be obtained at any level in reports.
Im working on transformation routines to transfer data from one cube to another. In the target cube I need consolidated figures at levels which are highlighted as bold in above example. And I would do this consolidation in the start routine. The idea for solution is to use the same method as standard BI system uses to club/consolidate values posted at most granular level of hierarchy.
Does anybody know the name of function module/program used by standard BI system to do the task? Or is there any better idea to do the task?
Your urgent help would be highly appreciated.
Regards,
Shabbar

If you were still using Mountain Lion back to Snow Leopard, I would recommend Mark Space's Missing Sync for Palm application. It does not support Mavericks, and there is a question whether they support devices as old as the Pilot. Here are the System Requirements.
Otherwise, I think you are out of luck, unless someone else offers another solution.

Similar Messages

How do you stop 'Transferring Data from...' in toolbar on first page of a website - eventually stops but takes a minute then loases some images on a site when complete - other browsers are fine.

Only happens on index page of website - Firefox repeatedly says 'connecting to site/transfering data from site in the status bar for about a minute before finally 'done', then some images on the index page are missing. All other browsers are fine - how do you turn off this problem in Firefox - there is nothing to download on the index page, already displayed but can't continue unless you jump to another page in the site. Searched web and many references to this but no definate answer. Code is same on all pages of site, just the index page which hangs.

You can check for recently installed suspicious or unknown extensions.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

HT1554 Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Apparently, I don't know my "com.apple.smig keychain" password. And I'm in the middle of setting up my new Mac mini. I transferred data from my MacBook and what I thought was the password isn't working! Help!!

Hello,
See if this helps...
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Transferring data from external hard drive to new replacement Macbook Pro...

Hello,
Apple have arranged to give me a replacement Macbook Pro due to faults with hardware on the one I am currently using. I will be going to pick up the replacement Macbook Pro tomorrow morning.
As a complete novice I just wanted to check that I have backed up the data from my current laptop onto my Iomega external hard drive properly, as I am slightly nervous about losing all my work and not being able to transfer all my files onto my new Macbook Pro tomorrow.
I did a back up using time machine earlier today which took quite a long time and seemed to go successfully. Is this the right thing to have done to save all data from my current laptop onto the external hard drive?
Will transferring data from the external hard drive onto my new Macbook Pro be a simple task?
Will I have to reinstall all my software such as Logic and Pro Tools? Also will my preferences and settings for music software be changed?
I'd greatly appreciate any advice.
Thanks,
Deena

Well it's like this.
If your problem on the Mac didn't affect the software or the TimeMachine backup, then restoring from that using SetupAssistant (when you first set up a new Mac it will ask you to restore) should go fine.
HOWEVER, if there are software issues on the Mac that also transferred to the TimeMachine drive, that will only transfer them back onto your new computer.
You can't very easily just pick out the things you want to restore from TimeMachine with, it doesn't give that fine detail of control, and if it's really messed up, it might not restore anything at all.
The golden rule of backups is to maintain two separate and easily accessible hardware copies of your data off the machine at all times.
Since you don't know for sure if the TimeMachine restore is going to work as intended, and your only other source is going to disappear, I'd advise a additional backup of your Music, Documents, Pictures and Movie folders etc., to another regular external drive via regular drag and drop copy methods.
The operating system and programs can all be reinstalled from fresh sources on the new machine, provided you have the AppleID and password, license codes for your programs, email passwords and any other necessary information to re-establish the license on the new machine.
(In some cases licensed software HAS NOT transferred to a new machine with a TimeMachine restore and had to be reinstalled)
Some times you have to contact the developer or "uninstall" the licensed program so it sends a signal to their servers that the program has been removed, else your license code may not work on the new machine.
You might decide the new machine would be better off with a fresh install of your programs that you know are 100% compatible with Lion etc., leaving a lot of older stuff you installed over the years off the new machine, if you restore from TimeMachine, you don't have this option. You pretty much get all the crap along for the ride,
If your new machine gets all crapped up, then restoring Lion is going to going to be a tough challenge, as you need a strong reliable Internet connection to download a fresh copy of Lion from Apple servers (no more disks). Once you do that, then somehow you have to use third party software ($$) to cherry pick your files out of TimeMachines trap. More headaches than you anticpated, and likely a charge by a specialist.
So I'd advise another hard drive with a copy of just your files, just in case a crap-up occurs
You can restore Lion yourself if it craps up, install programs from fresh sources as you know how to do, use the old license codes and then return your files manually exactly back into their same Music, Pictures, Documents, and Movies (etc, not Library) folders as before.
The key to this manual method is to make sure to use the same user name as before, so all your file location data pathnames retained by program files like iTunes to where the songs are located on the drive, are matched. Once you open these programs and restablish the links in OS X, then you can move them around.
Some tricks, if you use iPhoto, you can right click "show package contents" and inside is a folder with your Originals, copy that out and you can reimport your pictures into the new iPhoto Library on the new machine.
So use TM if you dare, but prepared to do things manually is my opinion.
TM restores have not been all that reliable or dependable, the more messed up your machine is, the worst the restore seems to be.
Good Luck

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it

I have recently transferred data from my old Mac to my new one. The result was good, but I have 2 users now, whose data I want to merge into 1 single user, so to avoid having to switch from one user to the other to view and use certain files. How to do it?

Here's an easy way:
Pick the user that you want to eliminate (making sure that the remaining user has administrator privileges) and move all of the data that you want to keep into the Shared folder. Reboot or log out and login to the user you want to keep. Copy all the data from the Shared folder into your account - placing it neatly in folders (Documents, Music, Movies, etc.).
Once the data is moved, log into the account you want to delete just once more to make certain that you've grabbed all the data you want to keep. Log out and log back into your admin account and go to System Preferences>Users & Groups and delete the 'old' user.
That should do it.
Clinton

Just bought a new macbook w/ mtn lion. transferred data from my old macbook over n it created another user name. that's actually good--xcept for music, which i want on my new acct. How do i move files from my "old comp" acct to my new one?

i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good--I'm not going to be accessing old files frequently--except for music, which i want on my new user name. How do i move files from my "old comp" account to my new one? Is there a way to easily move large #'s of files, or just one by one? I've googled extensively but can only find instructions for OSX 10.6 and previous, which talks about the "Shared folder," which I can't seem to find.

jesster03 wrote:
i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good
That's actually bad. Peruse Pondini's Setup New Mac guide and seriously consider starting over.

I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data. How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)

I transferred data from my Macbook Pro to my Mac mini but it forced me to make a new user for my old data. How do I transfer my music, pics, and docs from the "old" user to the new user (so that I only have one user instead of 2?)

Unless you transfer the files from Setup Assistant, Migration Assistant creates a new user with the data.
To transfer the files to your first user, you have to log on this new user, and copy all your files to /Users/Shard folder. This is a folder where you can put the files you want to share between two or more users, and all users can read and write in it.
After copying the files, go to your first user, open /Users/Shared folder, and copy the files to your user folders. If you migrated applications, you must know that they are stored in a common folder (/Applications), so you don't have to transfer them. To open /Users/Shared folder, open Go menu (in the menu bar) > Go to Folder, and type the folder

HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

@ melfromvictoria
Have you tried right clicking on the 4s and select "restore from back up"

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Transferring Data from old iMac to new iMac via Firewire

I am having difficulty transferring data from my old iMac to my new iMac via firewire. Per the instructions contained in migration assistant, when I hold down the letter "T" key during startup of the "old" mac the firewire symbol does not appear. Given that the firewire symbol does not appear I am unable to proceed with the transfer. Of note, my new Mac is the '09 24" iMac and my old iMac is the early 2006 model with the 17" screen. Incidentally, I am using the following cable contained in the attached link along with the adaptor (400) with respect to my old iMac.
http://www.bestbuy.com/site/olspage.jsp?skuId=8846387&st=firewire&lp=10&type=pro duct&cp=1&id=1215819175946
Can anyone help?

Hi Todd
Not sure why that wouldn't work, but it could be that cable and adapter setup as the Early Core Duo only supports firewire 400.
You should try a 9 to 6 Pin Bilingual FireWire Cable:
http://www.monoprice.com/products/product.asp?cid=103&cp_id=10301&cs_id=1030105&pid=3542&seq=1&format=2
http://www.firefold.com/6-Foot-9pin-6pin-IEEE1394B-Firewire-Cable-P965.aspx
Dennis

Problems transferring data from MacBook Pro to MacBook Pro

I just bought a new MacBook Pro and I am having problems transferring data from my old MacBook Pro. I am using an Apple Thunderbolt to FW adapter to hook both computers and I am using the Migration Assistant. Everything looked ok until the "Transferring Your Information" screen got stuck. It says that it is "Transferring your Application folder..." And it has been stuck for at least the last two hours giving a message that says "About 3 minutes remaining..." This is starting to get ridiculously annoying. Options?

I guess I am finding my own way as time progresses and frustration increases but these are two things that I have found so far:
1. Transfering from one machine to another does not seem to be the most efficient way to do this so using the TimeMachine backup must be the way to go...
HOWEVER
2. In this process I also found another "complication" called: Legacy FaultVault - My computer is encripted and I used this now so called "Legacy FaultVault" app to do it (when it was no a Legacy!). The thing is that you can not transfer documents from your TimeMachine backup to your new Mac if the Legacy Fault Valut is active on your old machine so you first need to desactivate the encription. HOWEVER, this brought another issue...when I tried to desactivate the encription using the Legacy FaultVault screen I got a message saying that I did not have enough disk space to allow me to do that....Isn't that great??? This is a problem by itself and it seems to have some sort of solution I was reading about (not straight forward at all). What I am trying to do now is to copy the folder that contains my files and just paste them on my new machine to see if that works....it looks like my apps are on my new machine, unsure if they are working...need to test this next....
I guess the transfer machine to machine could have sorted out the conflict eventually...after tens of hours or maybe not! Who knows....
A very frustrated Apple fan...
I love Apple products but this is an ISSUE...I feel like there is lack of adecuate documentation around to deal with this or the data transfering apps should be able to deal with this on a more efficient way....just saying...

How to transform data from hierarchy table to taxonomy table?

Hi Friends
Regarding my issue:
1) I am having data in the hierarchy table which contains two fields(i.e. code, description) , now we have created another taxonomy table which contains two fields(i.e. code,description) same as hierarchy table.
2) hierarchy table only contains data, which we have imported data into hierarchy table using import manager. we don't have data in the taxonomy table.
3) now my issue is,we have to move that hierachical data in the hierarchy table to taxonomy without using import manager, only through the data manager using validations and assignments.
4) If any one have solution to this issue, please help me out.
Thanks in Advance
bharat.chinthapatla

Hi Ganesh,
Thanks for your reply,
I need to move data from hierarchy table to taxonomy table using validations and assignments.
Thanks in Advance
bharat.chinthapatla

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
- I downloaded and installed the Windows Migration Assistant from Apple
- My Mac recognized PC and displays passcode
- The sasscode does not show / display on my PC
- My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
- Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
Any ideas? If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

Transferred data from ipad3 to new mini

Got Mini for Christmas. Transferred data from iPad3 to new Mini. Want to move data from iPad1 to iPad 3, but iPad3 is "disabled" & won't recognize old passcode. Tried to restore, but still can't get past old passcode login screen.

Hi,
Delete the service books you see under Options -> Advanced Options -> Service Books and resend the new service books from the new Virgin Site.
Peace,
BBTechSupport
Don't forget to CLICK that BLACK or GRAY Kudos square if some one was helpful.
Also please mark it as a solution if your problem is solved.

Transfering Data from SQL Server 2 Oracle

Hellow All,
Even the subject is not here, but i'm trying to transfere data from SQL Server to Oracle 8 (8.0.6) .. using the Wizard that ships with MS SQL Server. All Connections (ODBC or OLE DB) are alright, but still have problems in moving Data .. and Failure.
Failure in Data Movement and not in Table structures.
I have tried using most of the Valid and consistent ODBC and OLE Providers from Microsoft & From Oracle... but still have problems.
Even The Oracle Migration Assitiant from Access 97 dose not work properly.
Any commenets please ???
Regards
Tariq
null

Anil,
OMWB has an inbuilt collision manager, that will check for conflicting words and aptly replaces them with an alternative word.
OMWB also allows users to change these words once you finish performing capture. In this particular case, when you capture the view with the name 'rule', you can go to the oracle model in omwb and change the name to "rule1" or anything that is desirable, preferably those words that do not conflict with the oracle d/b's reserved words.
Regards,
Srinivas

Transferring Data from Hierarchy

Similar Messages

Maybe you are looking for