Transferring data from old hard drive to new computer

The hard drive on my MacBook Pro went bad and had to be replaced.  I was told it would be simple to transfer its contents onto the new installed hard drive, but I have yet to figure it out.  Can anyone tell me what equipment I need and how to do this?  Any help  would be appreciated.

Perhaps I'm missing something here, but if your old hard drive in fact failed, requiring its replacement, unless you have a separate backup, other than using a data recovery service, your data is gone.

Similar Messages

  • Strange iTunes Move from Old Hard Drive to New Computer

    My friend's old computer exploded but the hard drive and its data are fine. He had iTunes on it (not sure what version) and I'm trying to figure out how to move iTunes to the new PC but I'm running into a few problems.
    First of all, I hooked his old hard drive to the computer with an IDE to USB converter so it mounts as just another drive.
    I then installed the latest iTunes on his new PC and when we hooked up his iPod, it asked to blank the thing out (so I hit Cancel).
    So my question is a little more complicated than most since I have two things to accomplish here. I not only want to move his existing iTunes library to his new PC but I also need iTunes to work with his existing iPod. Hopefully, that won't involve wiping it since he has songs on his iPod that he doesn't have on his old iTunes, but perhaps I'll need to somehow get all his songs off his iPod, let iTunes wipe the iPod, then put them all back? I imagine I'd need to bring his iTunes library over first.
    Anyone have any ideas of the steps necessary to make this dance happen? I'm very computer literate, so detailed explanations aren't needed. I just need general directions and what order to do them in.
    Thanks,
    bd
    DELL Dimension E521   Windows XP  

    Chris,
    I'm sorry, I forgot to mention that the music on his iPod isn't completely the same as what's in his iTunes. This is what made this move so strange. I needed to figure out not only how to move his iTunes music collection to a new PC, but also how to keep iTunes from wiping his iPod since he has music on it that isn't in his iTunes.
    Since the new iTunes won't recognize his iPod without wiping it, is there any way to manually pull the music off his iPod, somehow put it in his iTunes folder so iTunes recognizes it, allow iTunes to wipe his iPod so he can synchronize iTunes with it, and finally put all his music back on his iPod?
    Thanks,
    Brian

  • Moving Data from old hard drive to new hard drive

    I'm posting this question in this category , I hope it's the right place.  Here's my situation and general information. I have a Toshiba L35 S2161 laptop, it's about 5 yrs old, running WinXP Service Pack 3.   just got the blue screen, wouldn't boot, tried everything and I only have the factory provided "recovery" disc that will wipe my drive and lose all my data if I use it.  I hadn't been doing regular backups, so I want to save as much if not all of my data as I can.  I don't want to spend time here going over everything I've tried (boot disc like Knoppix, etc) which didn't work, just need to get to the bottom line and make sure I'm doing the next steps correctly.
    Here's my plan:
    l.  Remove old hard drive from laptop
    2.  purchase new hard drive  - I've been told any drive will work, it doesn't have to be designed for a Toshiba.  I've been looking at best prices, etc. mainly Western Digital.  I may purchase a larger drive to at least get more memory , although I really didn't have that much on my old drive, but had a lot of apparent memory-related problems, freezes, etc.
    3.  Install new blank drive into laptop, using the Toshiba factory recovery disc to reformat the disc and get it ready to receive the data.
    4.  Insert the recovery disc into the drive, turn on the computer and HOPE that it boots it up and installs a fresh install on the new drive.  Not sure what the screen willl show at this point - I've never installed a new drive in a laptop, so will be somewhat nervous at this point to see what happens.
    5.  Assuming the new drive is recognized by the recovery disc and installs a clean version of WIN XP (I'm assuming that's what's on the recovery disc that came with my computer, because it had WIN XP pre-installed), I will now be ready to transfer data from the old drive.
    6.  This is the step I'm not sure what or how to do next.  I would like to clone my entire old drive onto the new drive but I'm afraid if I do that it might load damaged files that would mess up my new install.  I purchased a disc enclosure with a USB cable (haven't received it yet), and was going to use that somehow.  I presume I will plug it in and it will show up as an external drive and I can access that drive and transfer my priority files or data first and then try to transfer as much more as I can....
    I need further help and information about this last step...the critical data transfer method.  There are cloning kits that are plug and play and would transfer my entire system as it was before the blue screen, but again, I'm concerned about transferring everything onto a clean install and finding myself with a computer that won't boot again because it transferred a bad file.  Also, would it overwrite or interfere with the clean install on the new drive?   I'm stuck at this point....hopefully someone out there can walk me through this final step with the best option for transfer.  I'm trying to avoid purchasing pricey software like Acronis (which I looked at online and it seemed difficult to use, to figure out what to transfer). 
    My laptop is obviously out of warranty, being five years old, and I am not interested in taking it in to repair tech, I want to do this myself and I think I can with a few helpful tips.  Thanks for any help asap...

    Hi!
    The error message I received on the blue screen was "unmountable boot volume" which leads me to believe i have a corrupted MBR.  This fiasco happened when I turned off my computer when it was running a program (I know, bad thing to do).
    I'm waiting on a new hard drive with a 120 GB (my old drive was 80GB).  I was told not to go above 120 or I'd have partition problems. 
    The SATA drive enclosure powers up the old drive (I can hear the disc spinning) so the disc isn't dead.  If I''d have the full retail vesion of WinXP I would of course have used the recovery console, but I only had the toshiba recovery disc that came with my system.  Also, I couldn't burn a CD boot disc...didn't have access to another computer nor would a tech friend do it for me as he apparently made a disc for someone and their system crashed so I had no choice but to buy a new drive and try to transfer the data via the SATA external drive/usb cable.
    My big question now is:  Will the Toshiba recovery disc actually reformat my new drive?  Someone on another forum with a Toshiba laptop had purchased a new drive, used the recovery disc and the cd just went into a constant loop and never went into a full install.  I'm thinking that maybe on a new drive there isn't enough knowledge base there for the recovery disc to install and reformat a new disc.  That would be a bummer because then I'd have no choice but to purchase a retail version of WinXP which I was hoping not to have to do.  Thats' getting into some $$ when added to all the other thing I've tried to get this laptop up and running .  (A Knoppix live CD boot disc didn't work either).
    I don't know what service pack was on the old disc...possibly SP2, but if it was only SP1, I fear it's not going to have the ability to format a new disc.  The disc does have drivers, etc. but the question is, are they able to install the OS.  I was running XP3 when it crashed, so I know i would have to download that again.  I just want to get the darned system back up and running with my new drive and restore disc.  IF I can do that, then I'll try to transfer the data from the old drive via the external drive enclosure.
    I also decided against the clone....I was afraid I'd be cloning a bad disc or errors onto a new drive, and didnt' want to stress a possibly wonky drive even more than it possibly is. 
    So, that's where I'm at now!  Thanks so much for any further insight into this....something tells me the recovery disc isn't going to format my new drive but fingers crossed...more thoughts/feedback appreciated!

  • Transferring data from external hard drive to new replacement Macbook Pro...

    Hello,
    Apple have arranged to give me a replacement Macbook Pro due to faults with hardware on the one I am currently using. I will be going to pick up the replacement Macbook Pro tomorrow morning.
    As a complete novice I just wanted to check that I have backed up the data from my current laptop onto my Iomega external hard drive properly, as I am slightly nervous about losing all my work and not being able to transfer all my files onto my new Macbook Pro tomorrow.
    I did a back up using time machine earlier today which took quite a long time and seemed to go successfully. Is this the right thing to have done to save all data from my current laptop onto the external hard drive?
    Will transferring data from the external hard drive onto my new Macbook Pro be a simple task?
    Will I have to reinstall all my software such as Logic and Pro Tools? Also will my preferences and settings for music software be changed?
    I'd greatly appreciate any advice.
    Thanks,
    Deena

    Well it's like this.
    If your problem on the Mac didn't affect the software or the TimeMachine backup, then restoring from that using SetupAssistant (when you first set up a new Mac it will ask you to restore) should go fine.
    HOWEVER, if there are software issues on the Mac that also transferred to the TimeMachine drive, that will only transfer them back onto your new computer.
    You can't very easily just pick out the things you want to restore from TimeMachine with, it doesn't give that fine detail of control, and if it's really messed up, it might not restore anything at all.
    The golden rule of backups is to maintain two separate and easily accessible hardware copies of your data off the machine at all times.
    Since you don't know for sure if the TimeMachine restore is going to work as intended, and your only other source is going to disappear, I'd advise a additional backup of your Music, Documents, Pictures and Movie folders etc., to another regular external drive via regular drag and drop copy methods.
    The operating system and programs can all be reinstalled from fresh sources on the new machine, provided you have the AppleID and password, license codes for your programs, email passwords and any other necessary information to re-establish the license on the new machine.
    (In some cases licensed software HAS NOT transferred to a new machine with a TimeMachine restore and had to be reinstalled)
    Some times you have to contact the developer or "uninstall" the licensed program so it sends a signal to their servers that the program has been removed, else your license code may not work on the new machine.
    You might decide the new machine would be better off with a fresh install of your programs that you know are 100% compatible with Lion etc., leaving a lot of older stuff you installed over the years off the new machine, if you restore from TimeMachine, you don't have this option. You pretty much get all the crap along for the ride,
    If your new machine gets all crapped up, then restoring Lion is going to going to be a tough challenge, as you need a strong reliable Internet connection to download a fresh copy of Lion from Apple servers (no more disks). Once you do that, then somehow you have to use third party software ($$) to cherry pick your files out of TimeMachines trap. More headaches than you anticpated, and likely a charge by a specialist.
    So I'd advise another hard drive with a copy of just your files, just in case a crap-up occurs
    You can restore Lion yourself if it craps up, install programs from fresh sources as you know how to do, use the old license codes and then return your files manually exactly back into their same Music, Pictures, Documents, and Movies (etc, not Library) folders as before.
    The key to this manual method is to make sure to use the same user name as before, so all your file location data pathnames retained by program files like iTunes to where the songs are located on the drive, are matched. Once you open these programs and restablish the links in OS X, then you can move them around.
    Some tricks, if you use iPhoto, you can right click "show package contents" and inside is a folder with your Originals, copy that out and you can reimport your pictures into the new iPhoto Library on the new machine.
    So use TM if you dare, but prepared to do things manually is my opinion.
    TM restores have not been all that reliable or dependable, the more messed up your machine is, the worst the restore seems to be.
    Good Luck 

  • How do I transfer data from old hard drive to new mac exactly the same as it was on my old one?

    Unfortunately my 2009 iMac has been written off due to a faulty motherboard. Thankfully the company we got the mac from are providing me with a brand new one at no cost as I am under warranty. My old hard drive had many important documents and applications on it and we have requested for the old hard drive back. What I would like to know is how to I go about transferring all the stuff of my old hard drive to my new iMac? I would like everything to be set out exactly the same as it was on my old mac so basically I would like it cloned identical on my new mac from my old hard drive.
    Thanks Nathan

    In general, most people will recommend Carbon Copy Cloner or SuperDuper! You can find either one easily enough with a web search.
    However, in your case, I imagine you are going to have a hard disk returned to you all by itself, and you will need to install it in an enclosure. Don't let that bother you as this is easy to do and the enclosures are not expensive ($40 or so).
    Once that is done, I would recommend you set up your brand new Mac by answering all the questions during initial setup as usual. Be sure to use your correct Apple ID - probably the same one you used to log into this support forum. When you reach the point in which it asks you if you would like to transfer your old documents and settings, connect the old hard disk and select it as the source. It will take some time as it copies all its contents to your new Mac. All your familiar items will be exactly as they were on the failed Mac.
    After that, you can use the old hard disk as a Time Machine backup. When you are satisfied everything on your new Mac is running as it should, go ahead and erase the old disk. Then, tell Time Machine to designate it as a backup, and the rest is automatic.

  • How to transfer history from old hard drive to new computer

    So my motherboard on my old PC died. I therefore pulled the hard-drive from my old computer and patiently waited on my new toy to come in. Problem is, I didn't have a chance to do my weekly synch before my old system crashed. I'd like to get the history/favorites off of my old hard-drive, but I'm not sure how to go about it. The OS are also different - old PC was Windows 7, new is 8.1.
    Suggestions?

    You need the places.sqlite file to restore history.
    Note that this file stores the bookmarks as well, so you will lose bookmarks that you already have created.
    The file structure in Windows 8 is the same as in Windows 7 and Windows Vista.
    *C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
    The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
    *http://kb.mozillazine.org/Show_hidden_files_and_folders
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How do I transfer data from external hard drive to new computer

    We had been using a PC with XP that had four different users and ITune libraries.   It was attacked by viruses that got deep in op system and could not be fixed.   We purchased a new PC with Windows 8.   I had transfered the itune files by copying them from the hard drive to a external hard drive.    Is there a way to transfer the files from the external hard drive to the iTunes that I just downloaded onto the new computer.   I thought that it would be as easy as copying the files from the external hard drive to the iTunes file on the new computer but this did not work.   If I go into iTunes and select copy file from library it will import the file just file but I really don't want to copy thousands of files one by one.   However, when I try to open those files I get an error message.    We have two iPads and four iPod Touches.   Any help would be greatly appreciated!

    I found a posted answer from someone else who asked the same question and it worked.   It said to copy the entire file that was saved on the external hard drive to the my music folder before ever opening ITunes that was newly installed and it worked.

  • Macbook screen cracked. How to transfer files from old hard drive to new computer?

    I had a 13" white macbook, but the screen cracked, and the computer wouldn't work anymore. I took it to be fixed, but they weren't able to fix it, so they gave me a macbook pro. I asked them to try and transfer the files from my old macbook to the old one, but they said that they couldn't, and gave my the hard drive and said I could have someone else try to fix it for me. How do I connect the old hard drive to my new macbook to see if I can get the files off of it? I don't have the old computer anymore, just the hard drive itself. Thanks!

    Sorry, I don't understand all of this stuff. Do I have to buy a certain one for Mac? Or will any enclosure work?  Would this one do what I need? http://www.bestbuy.ca/en-CA/product/startech-startech-external-hard-drive-enclos ure-with-integrated-usb-cable-sat2510scb-sat2510scb/10192449.aspx?path=9e9804b6f 287edbfe4f83d36c2a6aa71en02

  • Transferring data from crashed hard drive to new?

    My trusty 6 year old mac book crashed.  Took it to apple, they couldn't recover.   Purchased new 15 mac book pro with 1TB. drive.   Removed my HD from the old mac book and trying to transfer files via sata cable to USB directly to my new mac.   Been successful with lots of files.  Problem is, new mac shows old file icons from Applications,  library, users, etc. but not contents.  I tried copying entire hard drive... Wont work. Then went into users, from my main folder with most of my saved stuff.  The largest two folders I want to recover is the Documents folder and the Images folder.   I cant open and see the files inside because for over 24 hours now it has been showing "Preparing to copy files".   When I went to the images folder after about 6 hours it went from preparing, to copying with estimated time of 6 days to complete.    Is there a better way to do this?    If I could see the contents in the folders, I could simply just transfer the main Items needed?   Any help is appreciated!

    I have not tried a recovery program or repairing the HD.  I thought Apple tried to repair at the Genius bar when I brought it there.  They said I should contact a recover company that may cost thousands of dollars because they wont do recovery.     "So far I have copied a ton of files form smaller folders that didn't have so much data".    The problem is that the main documents file is so large, that when you click into the folder, you can't see which files to copy... Kind of like its buffering?  So I clicked on copy entire folder and it been preparing to copy.. so far up to 6,162 files... It has been doing this for over 24 hours.  When I copied the smaller folders, it would say the same thing until it read everything in the folder, then copied them just fine. On some files it transferred in a few hours because there were only a few gigs of data. 
    Maybe a data recover program would help buffer and read the files faster so I could simply choose the files I want... the copy?

  • Tarsnferring data from old hard drive to new hard drive

    Subject:
    I have a 2006 MacBook pro 1,1 with snow leopard 10.6.3 (I think). I have used time machine to backup my initial 80gb internal hard drive but I now want to install a new 1TB hard drive. Do I use time machine to transfer all my data from my old to new drive? If so how do I do this?

    Instead of using Time Machine, I recommend to make a clone with Carbon Copy Cloner on that external disk. Time Machine can fail and leave OS X or your files damaged. To restore the clone:
    1. Install the new hard disk.
    2. Insert the Snow Leopard DVD and press C key while your Mac is starting.
    3. Go to Utilities menu > Disk Utility, select the hard disk at the top of the sidebar and go to Partition tab.
    4. Press "Options" button and choose "GUID Partition Table". Then, press + button to add a volume, format it with "Mac OS Extended (Journaled) and press "Apply".
    5. Go to Restore tab, drag the external disk with the clone to "Destination" box and press Restore.
    6. When it finishes, restart the Mac

  • What is the correct way to transfer data from old hard drive to new Crucial SSD on a mid 2010 13" MBP

    I just bought an Crucial M550 256GB for my mid 2010 MBP. And I'm not clear on the data transfer instructions.
    1) it came with Acronis instalation kit with a blank CD and a usb cable. I'm not sure what this CD is used for?
    2) is it best to install the SSD with a fresh OSX download and then just use time machine to load all my previous settings?
    3) or do I partition the SSD before I install it in the MBP and transfer using a clone?
    Not sure what to do here...

    Well, I am not familiar with the Crucial kit you got - you might want to ask them about that blank CD...... however, I did install an SSD and this is what I did:
    I ordered a kit from OWC which included an external USB hard drive enclosure and tools. When it arrived, I first installed it in the external enclosre, hooked it to my MBP and then used CarbonCopyCloner to make a full bootable clone of my system on the new SSD after formatting it to Mac OS Extended (Journaled) and the GUID partition scheme. I then uninstalled the internal, installed the SSD in its place (following the install video availabe at OWC) and booted up - that was it. I installed the old internal drive into the external enclosure for an instantaneous bootable cbackup.

  • How do i move data from old hard drive to new one?

    Just bought a 750GB Hitachi hard drive for my MacBook Pro.  What is the best way to move the new data to it?  Load it from a time machine backup, or as one source says, install a clean copy of Snow Lepoard, then upgrade to Lion, then copy the data?  Any thoughts?

    I just used this posting from Apple to copy all my Time Macine files from one drive to a new one, using OS 10.8.4  http://support.apple.com/kb/HT5096

  • Transfer data from old hard drive to new G5

    I have an older MAC (IDE) interface and the IO board has gone out. It will no longer power up. I need to somehow copy my data over to a new G5 system. If I understand the specs correctly the new G5 is SATA. Does it also support the IDE drives. What is the easiest way to get my data copied over?
    Please advise...Thanks

    Hi,
    The easiest way is probably to install the old IDE hard drive in an appropriate USB 2.0 or FireWire enclosure, and then connect the unit (externally) to the new computer. There are also USB-to-IDE adapters without a case (but with a power supply). You should find the necessary equipment in most computer stores.
    Jan

  • Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
    How did you import the photos to iPad and iPhone?
    If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
    See this document:  http://support.apple.com/kb/HT4236
    You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
    If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
    http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
    Save photos to your computer using iTunes
    Connect your iOS device to your computer.
    Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
    Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
    Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
    Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
    Select all the photos in an album or event: Tap All.
    In iTunes, click the button for your device and click Apps at the top of the window.
    Below File Sharing, select iPhoto (in Apps).
    Select the Shared Photos folder under iPhoto Documents.
    Click Save To and select the location on your computer where you want to save the items.
    To view your photos, go to the Finder and look in the location you selected above.

  • Changed hard drive... How do I transfer from old hard drive to new hard drive

    hanged hard drive... How do I transfer from old hard drive to new hard drive.
    I have installed the new hardrive on my macbook and reinstalled the software... how do I transfer the information form the old drive to
    the new one.
    ?can I put the old drive in another macbook and connect via firewire???
    Thanks

    Put the old hardrive in an external hardrive case....like this...
    eshop.macsales.com/shop/firewire/on-the-go
    .....this is just an example their are less expensive models....

Maybe you are looking for

  • XML Report Excel Output Numeric & Character value left aligned

    Hi, I want the XML Report Excel ouput both numberic and character values to be left aligned in the report ouput. Currently my report excel ouput prints the number value right aligned and character value left aligned. I have tried to concat a space to

  • Check Refunds Authorization

    Hi All, We have a requirement at our client place- We would like to issue checks to the business partners through automatic payment program FPY1. Clerk should be able to issue the check if the amount is les than $ 500 If the amount is greater than $

  • How do I open a video podcast in a separate window?

    I used to have it set so I can open a video podcast in a separate window and then close it and have the main window STILL open in back of it... Now I don't see and pref for that in 10.4.1 Any idea how to do this?

  • Find Number of Active Calendar Client Sessions?

    What is the "ps" command to find the number of active Calendar clients at any given time? We are using 10.1.2 in an OCS installation on Linux SuSe servers. Also, is there a way to see the individual usernames associated with each active session?

  • Bridge tries to open CS and not CS3

    For 3 months since installing CS3 and Bridge all was well. Suddenly Bridge tries to open files in CS on a different drive, and CS is non working. How do I change the linkage back from Bridge to CS3? Do I need to reinstall CS3?