Transferring data from one planning area to other within the same system
Hi,
We have two planning areas setup and the corresponding planning books in the same system. Now I have to save the results of first book and transfer the results in the other. They have common key figures. Is the data saved to the key figure after saving show up immediately in the second one or do I need to load?
Thanks.
Visu,
If I understand your requirement correctly, you should be able to use transaction /SAPAPO/TSCOPY (Copy/Version Mgmt) to send the data from the one planning area to the other. Please let me know if I misunderstood the requirement.
Sean
Similar Messages
-
How to copy data from one planning area to other planning area
Hi ,
I need to copy data from one planning area to other planning area, the MPOS for two planning areas are differant and here my scenario is one planning area having extra key figures.
First i need to release forecast data to CIP planning area and then, i load the data from infocube to MPS planning area and copy the data from CIP planning area. here both MPS and CIP planning areas having different MPOS .
Please help me in this. Please give me the stepls i need to follow.
Thanks in advance.
Regards,
ChanduHi,
You can use the transaction /sapapo/tscopy.
In this you can configure your source plng area and destination plng area. You also have an option to map your KF. There is no problem if the MPOS are different as long as you are able to map the characteristics between the 2 MPOS.
Alternatively, you can create an Infocube which shares common ground between the 2 planning areas and extract data from CIP plng area into the infocube and then copy teh data from infocube to MPS plng area using the the transaction /sapapo/tscube.
Hope this helps.
Thanks
Mani Suresh -
What's the RFC name for BPS to transfer data from one Plan-Area to another?
I created a role for BPS planner.This include all authorization except the RFC authorization for transfering data from one plan-area to another.However, even I set the '*' to the RFC name. Am I missing something? Any suggestion is appreciated.
Best regard,
Gerald HeHi Vlad,
Thanks for your reply. It's helpful.
Finally, I found that this error message will be pop-up when the authorization is not right. For example, if you don't have right authorization to access the corrsponding InfoCube which the BPS is based on. Now, I find the root cause and fixed this issue.
Best regard,
Gerald -
Hello, I have songs that show they are "Waiting" for download from the cloud but they are greyed out. Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible. I have a Match subscription and Match is working. If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them. I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
ThanksI did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?
-
BADI for transfering data from one modal to another modal within single appset
Hallo Experts,
My Business Requirement is Transfer of data from one modal to another in same environment and did this taking reference from below document.(How to custom badi for replicating destination app)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e04b5d24-085f-2c10-d5a2-c1153a9f9346?QuickLink=index&…
Document contains TR for implementing BADI, but this document supports bpc version 7.0 and we are using is bpc 10.0.
So i make all compatible changes in BADI implementation and activate it. Now i am testing using transaction UJKT using following script.
and the result is records successfully written back to application MIS, but when i check data is not moved to target application MIS.
I am facing stuck situation in my project work. Please Suggest. Hope for positive reply.
Script:
*XDIM_MEMBERSET WM_ACCOUNT = WM_041,
*XDIM_MEMBERSET WM_UOM_02 = UOM_004
*XDIM_MEMBERSET WM_UD_2 = WM_07
*XDIM_MEMBERSET WD_EXT_MAT_GRP =CHALK-PH-I,CHALK-PH-II,CHAVN-PH-I,CHAVN-PH-II,NASHIK-WM,RAJASTHAN-WM,TAMILNADU-WM
*XDIM_MEMBERSET CATEGORY= Plan
*XDIM_MEMBERSET AUDITTRAIL=Input
*XDIM_MEMBERSET P_ENTITY = SIL
*XDIM_MEMBERSET RPTCURRENCY = LC
*START_BADI DAPP
DESTINATION_APP ="MIS"
RENAME_DIM ="WD_EXT_MAT_GRP= PRODUCT"
ADD_DIM ="PLANT=NO_PLANT","MIS_ACCOUNTS=CAIN0058040008","COST_CENTER=NO_COST_CENTER","FLOW=Opening","UOM=AMT","CUSTOMER_SALES_2=NO_CUSTOMER","CATEGORY=Plan","AUDITTRAIL=Input"
DEBUG = ON
WRITE = OFF
QUERY = ON
*END_BADI
Please find attached result.
Regards,
Dipesh Mudras.Hello,
Here is the manual to copy data between apps (it works with BPC NW75):
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203?quicklink=index&overridelayout=true
It works me, but now I need to modify the Script Logic to make that a "property" from the origin dimension has to be copied to the destination dimension as "id", like follow:
//*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
//*XDIM_MEMBERSET TIME = %TIME_SET%
//*XDIM_MEMBERSET ENTITY = %ENTITY_SET%
//*XDIM_MEMBERSET RPTCURRENCY = %RPTCURRENCY_SET%
*START_BADI FiltroPD
WRITE = OFF
APPL = $APPLICATION$
ADD_DIM = "ORIGEN = APPVENTAS"
ADD_DIM ="O_COSTE = no_input"
ADD_DIM="CECO = no_input"
RENAME_DIM="P_ACCT = RATIOS.P_ACCT "
*END_BADI -
How to read the value from one context node in other in the same view.
Hi,
I am working on enhanced component ICCMP_BP_CP/BuPaContactPersonCreate , i need to read the partner_guid from Customer context node in contactpersonaddress context node.
Could you please guid me how to achieve this? if possible, please explain me with some sample code.
i am trying this code in GET_FAXFAX method of contactpersonaddress-faxfax, but it is throwing me the type cast exception.
data: lr_entity type ref to cl_crm_bol_entity.
data: lv_test type string.
lr_entity ?= collection_wrapper->get_current( ).
lr_entity = lr_entity->get_related_entity( 'BuilContactPersonAddressRel' ).
Thanks in advance.
Regards,
Kamesh Bathla
Edited by: Kamesh Bathla on Jun 25, 2009 7:46 PMproblem solved by writing the code in context node class CREATE_CONTPERSADDRESSVALNODE method
coll_wrapper = customer->get_collection_wrapper( ).
TRY.
entity ?= coll_wrapper->get_current( ).
CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
CONTPERSADDRESSVALNODE->on_new_focus( focus_bo = entity ).
DATA: lr_collection TYPE REF TO cl_crm_bol_entity,
lv_fax TYPE string,
lv_fax_ext TYPE string,
lv_tel TYPE string,
lv_tel_ext TYPE string,
entity_addr TYPE REF TO if_bol_bo_property_access, "#EC *
coll_wrapper1 TYPE REF TO cl_bsp_wd_collection_wrapper.
lr_parrent type
lr_collection = entity->get_related_entity( 'BuilStandardAddressRel' )."'BuilContactPersonAddressRel' ).
IF lr_collection IS BOUND.
coll_wrapper1 = contpersaddressvalnode->get_collection_wrapper( ).
TRY.
entity_addr ?= coll_wrapper1->get_current( ).
CATCH cx_sy_move_cast_error.
ENDTRY.
getting fax number
CALL METHOD lr_collection->if_bol_bo_property_access~get_property_as_value
EXPORTING
iv_attr_name = 'FAXFAX'
IMPORTING
ev_result = lv_fax.
***setting fax number
CALL METHOD entity_addr->set_property
EXPORTING
iv_attr_name = 'FAXFAX'
iv_value = lv_fax. -
please give with an example if possible to use?
Moderation: Thread Locked. Kindly do not post interview questions hereI'm so sorry I don't have a solution for your problem but would you be able to show how you managed to call an external task-flow inside another application? I'm having some difficulties doing so.
Thanks so much -
How to extract data from SNP Planning Area
Hi All,
I am trying to extract data from SNP Planning Area. i had created the data source as it is given in help document but when i try to test the data source for the data through extractor checker it gives a message "0 data records selected".
So please help me out if some body have some document in the regard pl forward it to my mail id [email protected]
Thanks in Advance.
Best Regards.
rahulHi Ganesh,
In SNP you do not have to go to RSA6 u can create datasource in S&DP Administration>change planning area>Extras-->Data Extraction Tools.
from there u can do all the settings and can as well test.so there is no use of either RSA6 or RSA3.
bets regards,
rahul -
How to show data from one web site to other web site having diffrent domain.
Dear all,
i want to show the selected data from one web site to other web site.
the location of the two web site is geographically seprated (and diffrent domain)
Please tel me in how many ways it can be accomplished.
If it can be done using jquery then please tel me the function or procedure to do it.
Note: ( i have seen the above behavior in many web sites .
like, i was purchasing some thing but finally declined,
after that i visited some other web sites to gets some other data on other area
, and i show my selected items of the first web site on second website as advertisement.)
i would like to know how these things are accomplished and how it can be done in asp.net.
yours sincerelyHello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
BAPI or FM needed to retrive data from SNP Planning Area
Hi All,
There is a planning area created for SNP ,now I need to retrive key figure values present in this SNP Planning area.Does any know of BAPI or FM which can be used to retrive data from SNP Planning Area?
Thanks,
VenuHi Venu,
A) Please try this BADI Implementation
/SAPAPO/EXTRACT_EX Sample implementation
/SAPAPO/SDP_EXTRACT Definition name
/SAPAPO/IF_EX_SDP_EXTRACT Interface name
/SAPAPO/CL_IM_EXTRACT_EX Class name
The Uses of this BADI are;
1) You can interrrupt the data extraction process from the planning area.
2) You can use the CHANGE_INPUT method to override the input parameters for the extractor (sent from the requesting system).
3) You can use the CHANGE_OUTPUT method to alter the extracted data, derive the values of certain InfoObjects , for example.
4) You can use the CHANGE_SELECTION method to modify the selection table that is used for extracting data using a BAdI method. This is particularly useful when extracting data from an SNP planning area because you cannot specify a location product in the standard selection.
B) You can also try the below function modules
/SAPAPO/CL_IM_EXTRACT_EX - Load key figures of Demand Planning
/SAPAPO/CDI_TSDMID_KEYFS_LOAD - Load key figure data from TSDM
Regards
R. Senthil Mareeswaran. -
How to Maintain the MM Master Data from one company code to other co code
Hi Experts,
Can any one pls tell me how to Maintain the MM Master Data from one company code to other co code.
Presently we created New plants,New Purchase Orgs under different company code.
1) Material Master data
2) Vendor MAster data
3) PIR
4) Source List
Is there any standard Transactions...??
Please reply.
Brgds,
KKHi
Check out the link -
http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreateasimpleLSMWusingbatchinput+recording
lsmw for data migration for xk01 transaction
http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
Regards
Anand -
Transfer data from one record typr to other
Hi All,
How can we move data from one record type to other record type in Oracle PL/SQL?
Can any one reply me ASAP.
Thanks in Advance,
DhanaLike this
declare
type rec is record(no integer, name varchar2(10));
rec1 rec;
rec2 rec;
rec3 rec;
begin
rec1.no := 1;
rec1.name := 'karthick';
dbms_output.put_line(rec1.no||'/'||rec1.name);
--Now just assign rec1 to the rec2 by element
rec2.no := rec1.no;
rec2.name := rec1.name;
dbms_output.put_line(rec2.no||'/'||rec2.name);
--Now just asign directly
rec3 := rec2;
dbms_output.put_line(rec3.no||'/'||rec3.name);
end; -
Is there a way I can move movies from one itunes library to another on the same computer?
Is there a way I can move movies from one itunes library to another on the same computer?
Locate them in the Windows Explorer, move or copy those files as you would any other, and drag them into the open iTunes window when the second library is loaded. If you're using two iTunes libraries on one user account, you only need to locate the files; otherwise, they need to be put in a shared area.
(63747) -
How do I move Contacts & Calendar from one User to another User on the same Macbook Pro?
How do I move Contacts & Calendar from one User to another User on the same Macbook Pro? OSX 10.9.5
is this second library in a different account on the computer?
Look at Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iTunes: Setting up Home Sharing on your computer - http://support.apple.com/kb/HT4620
iTunes Home Sharing now works between users on same computer - https://discussions.apple.com/thread/3865597 -
Move DC from one SC to another SC in the same track
Hi colleagues,
I am facing a problem when I try to move a DC from one SC to another SC, in the same track.
This track has all custom applications developed by my team. It happens that our custom applications were all in one Software Component, and we want to have one SC per application.
I followed the steps described in SAP Note 888969(and also this tutorial: http://wiki.sdn.sap.com/wiki/display/JDI/StepbyStepguidetoMoveaDCfromoneSCtoanother).
I could successfully Integrate all components of the DC in the new Software Component. Then I did check-in and activated it. Everything fine so far.
In the last step of copy/create the .dcref file in the TOP-Level DC folder, I did as described: have created an empty file with the same name and extension as the existed file on the old SC (new activity created). Then I checked in and on Activation phase I get an error: "Error! The following error occurred during request processing. /gems/clock' is already active in the compartment 'GEMS' and cannot be activated in the compartment 'ESS_CLOCK_IO'.
Does anyone had this problem before or have an idea how I can fix this problem?
Thank you in advance,
RegardsFor future search:
I can suggest the movedc command of the guide
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30d8e1f6-a372-2b10-65af-8a366b91eba7
Regards,
Ervin
Maybe you are looking for
-
How to Print a View...
Hi I just want to take a print out of my view and i know that in previous version we could write the following code on View's Button: WDPrintService.getPrintService().print(wdControllerAPI); but don't know in CE 7.1. Thanks...
-
Can any one give me answer for these questions
Can any one give me answer for these questions. I got these questions from net plz post the answers you know ABAP CERTIFICATION QUESTIONS 1. If a table does not have MANDT as part of the primary key, it is ____. A: A structure B: Invalid C: Client-i
-
Link between Material Document number & Accounting document number
Hi All, For material document there is a corresponding accounting document number generated.However this is not the rule in all cases. Where is the link between the two(Material Document & Accounting Document) ? In other words i want to list those ma
-
Using time capsule to backup FCP files on External Lacie drives
Has anyone done this with any measure of success? I have my FCP projects on 3 to 4 external Lacie drives and I want to back them up onto my 1 TB TC. It seems TC only backs up the internal HD and not external HD's. Is my only option to drag the data o
-
Changes not showing in other instance of web logic server after deployment
Hi Everyone, My Jdev version is 11.1.2.3.0. I have developed one ADF application and deployed into web logic server from Jdev itself and is working fine with the URL. Now the same EAR file is deployed into other instance of web logic server. it was w