Transferring data using migrant assistant

I have a white macbook with snow leopard, i have purchased a new aluminum macbook with leopard. upgraded the new one to snow leopard and now want to transfer files (music,photos,settings,apps etc) from mac to mac.
I was using migrant assistant, after completion it it transferred a small portion of photos about 10%, and thats it. I was using an ethernet cable to connect them together. none of my settings or documents transferred either. Is this the only way to complete this transfer and if so, has anyone got any tips or had this problem?
Otherwise I'm looking at using a memory stick and doing it the long way.
thanks

You might get better advice asking in the Snow Leopard set-up forum, here:
http://discussions.apple.com/forum.jspa?forumID=1337

Similar Messages

HT4889 I just transferred data using migration assistant from a macbook prop to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect.

I just transferred data using migration assistant from a macbook pro to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect?

Suggest you try the password for the Macbook, not the previous one.

Transfering data using switch device manager from old palm to new curve 8330....please help!!!

Trying for hours to import data using switch device manager from old Palm Treo and Palm Desktop 4.2 to my new Blackberry Curve 8330. Blackberry seem to connect...but second step of choising Palm or Mircrosort will not allow me to select anything. I do not believe Palm is connecting...Is my palm to old? If I cannot tranfer data this way, especially contacts is there any other way besides entering it into Blackberry one by one?

Hi there!
If the device switch wizard is not working, check this KB to be sure all of your Palm things are compatible and that you are using the correct process:
KB05459 How to use the Switch Device Wizard to switch from another smartphone to a BlackBerry smartphone
And then see this KB for some troubleshooting help
KB10722 BlackBerry Desktop Manager does not detect the Palm software when using the Switch Device Wizard
And if it happens that it will not work, then you will have to find out how to export from your Palm to an ASCII or CSV file...then you can import it with this process:
KB11194 How to import contacts from an CSV file to the BlackBerry device
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Acquiring pressure data using daq assist

Hi all,
I want to use DAQ Assist to measure the pressure.When i select DAQ Assist>Acquire Signals>Analogue Input>Pressure>Pressure(Bridge) then is says 'no supported devices found'
What should i do?
thanks

I have Trafag pressure sensor anyway i give up doing it by daq assistant.I did it by using another daq tools.But now i have a new problem in calibration of sensor so i will post a new question

Transferring data using interactive lists

can anybody explain how to transfer data using interactive list with a good example. points would be rewarded.
regards,
sri.

Hi,
If you are using non-alv report..Then
Use HIDE..and then use SET PARAMETER..
Ex..
DATA: ITAB TYPE STANDARD TABLE OF MARA WITH HEADER LINE.
* Get the data.
SELECT * FROM MARA
              UP TO 10 ROWS
              INTO TABLE ITAB.
* Display
LOOP AT ITAB.
WRITE: / ITAB-MATNR.
HIDE ITAB-MATNR.
ENDLOOP.
AT LINE-SELECTION.
* Go to MM03 when double clicked on the line.
IF SY-UCOMM = 'PICK'.
    SET PARAMETER 'MAT' FIELD ITAB-MATNR.
    CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDIF.
Thanks
Naren

Transferring Data Using Ext Drives

Can you transfer data from one ext. drive to another once they are connected to your iMac ?

Thanks for the affirmative answer, but what I should of added originally was.....'and if so how'. To be clearer with my original question I would have two ext. drives connected to my iMac, then would ideally like to transfer data from one drive to the other.
To add...when I open one drive I then try to open the other to be able to view both together, but when doing so it closes the original screen I opened.
I was able to do this with my PC and have seen a Youtube help video saying that when you connect a drive it appears on your Desktop, then all you need to do is drag the files across (as i used to do with my PC)
I can only see my drives via Finder.
Thanks again.

Transfering Settings with Migration Assistant

Can anyone tell me what "settings" are transferred when using migration assistant to set up a MacBook Pro (by either migrating from another MacBook Pro or from a time machine backup)? It always asks if you want to transfer 1) applications, 2) documents, 3) settings
Here is the background:
1) Applications: I am setting up a new machine (OS 10.6.6) from an almost identical machine that I barely finished setting up (also OS 10.6.6). I had only a few programs installed but because of known transfer problems due to licensing issues (Office 2011, Adobe CS5) was advised by colleagues just to install my applications fresh on the new machine, which I did.
2) Documents: I would like to use migration assistant to copy all my documents, I don't see a problem with that and I was planning to do that next.
3) Settings: What I don't know is whether I should restore/migrate "settings". Are these things like my folder display preferences or power settings (which may have taken some time to get just the way I like and would like to replicate)? Are these settings that pertain to my applications, which may not link up with the newly installed (un-migrated) applications and then cause problems? Or are these things like internet settings, which I've already gotten in place and working for the new machine?
So the big question is: what "settings" are these and will they overwrite or interfere with anything that I already have set up on the new machine?

what "settings" are these and will they overwrite or interfere with anything that I already have set up on the new machine?
Using Migration Assistant, all of your settings will be transferred: system settings, application settings, even .ds_store files: your windows will all be in the same place as they are on your other machine; your custom icons will still be there, your file structures, your desktop picture, your passwords, pretty much everything.
If you use Migration Assistant on the initial setup, the account you transfer from your old machine will be the main admin account on the new machine. If you wait and use Migration Assistant after the initial setup, a new account will be created to contain the migrated data.

Using Migration Assistant from iMac G5 to Intel Core Duo

I've developed a problem while transferring files using Migration Assistant.
I've inadvertently created two accounts. I misunderstood what was going to happen when renaming one of them. I thought I had to change the old home folder/user name to avoid a conflict when creating a new Admin/user acct on the new computer .... don't ask!! So, I now have several folders: some that came on the new iMac, the others that read 'from the old Mac'. It's apparently the new login/acct name that's linked to the 'from the old Mac' files . Hope this is making sense.
If I go up to the top right menu and select the newly named acct., it rotates and brings up all the settings and preferences I wanted transferred and obviously were. If I use the old login name, it's just the basic iMac settings without my settings, prefs,etc..
How can I delete the basic acct. and use the imported settings/preferences? I want only one Admin Acct./log in with my imported settings/prefs. Do I delete folders and rename the 'from the old Mac' to just the folder name? I've read some of what Kappy has said aout migrating files from the G5 to the Intel, and I know he's an expert, he's helped me before, but in truth, I don't really understand what he's saying about how to migrate to the Intel.
Can someone offer some advice? I'd appreciate it.

You may not want to keep the Home folder you've migrated. See the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

HT4796 after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?

after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?

Welcome to the Apple Support Communities
By default, Migration Assistant creates a new user account where it puts all the transferred data. Just go to  > Log Out, and log in the new user that Migration Assistant has created, so you will be able to access to the transferred data.
If you want to merge the data into the first user account, use the Shared folder (it's in /Users/Shared) to put the transferred files there, and then, on the first user, go to the Shared folder and put all the data in the folders you want

I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8. Not all my files transferred (or I can't find them). Help

I used migration assistant and my ethernet cable to move data and apps from my 5-yr old Intel-based iMac to my brand new Intel-based iMac running OS Lion. The old machine was running OS 10.5.8. Not all my files transferred (or I can't find them). I've seen recommendations to select the old computer in System Preferences, but that didn't work. Help. Thanks!

IMO, wrong choice. Start over, using a FireWire cable and following the steps in Pondini's Setup New Mac guide.

I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but it doesn't show on Finder. How can I locate my data?

I transferred about 400 gigs of data from my MacBook Pro to my new iMac using Migration Assistant, but can't find any of my data on Finder. I'm thinking that the data got transferred but not cataloged. Finder shows about 400 gigs of my hard drive being used, but the files it shows don't come anywhere close to 400 gigs. How can I find out what is really on the hard drive and how can I access my MacBook files I transferred?

I suggest that you start over, boot into Internet recovery mode, launch Disk Utility, erase and reformat the HD with one partition and GUID option, quit Disk Utility, restore the OS, and on first boot, use the Setup Assistant to migrate from the MacBook, following the steps in Pondini's Setup New Mac guide. If that doesn't solve your problem, contact Apple's Support. If they recommend the same steps, I'd opt to return the machine and get another (you can do that the first 14 days you own it, no questions asked).
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack of an ethernet port on MacBook air does not help.

William ..
Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the my new iPhone number is OS. Any ideas?

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS. Any ideas?
<Personal Information Edited by Host>

Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
- I downloaded and installed the Windows Migration Assistant from Apple
- My Mac recognized PC and displays passcode
- The sasscode does not show / display on my PC
- My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
- Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
Any ideas? If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this,

Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this?

I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
Anybody has an answer?

Transferring data using migrant assistant

Similar Messages

Maybe you are looking for