Transferring existing programs (The part I always hate!)

What programs transfer automatically and which ones do I have to re-install when installing mountain lion? Are there any extensive lists available of software re-installation problems? Also, is there any information to help re-install Parallels (Win Xp)

There are no program transfers or removals involved. Mountain Lion replaces only the OS X software when you upgrade. Third-party software is left untouched.
If you need to know if your third-party software is compatible: See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.

Similar Messages

  • I would like to add family members to my existing apple id that is used for my iCloud account.  All of the family members already have existing apple ids.  Can I make these existing apple ids part of my family?

    Adding existing apple id to an iCloud family share
    I would like to add family members to my existing apple id that is used for my iCloud account.  All of the family members already have existing apple ids.  Can I make these existing apple ids part of my family?  I have tried this, but "verifying" the apple id always fails with "existing family member" or an error something to the effect "unable to do at this time, try again later."
    Thanks

    "am I still able to register another phone to the same ID?"
    Yes.
    ") that I do end up creating a new apple ID "
    This will cause complications.  i do not recommend this.

  • How do I find the ports a pre existing program used in DAQ?

    Hi all, 
    I am setting up a laser displacement sensor and trying to utilize a pre existing program that was created by graduate students before me. There are 4 wires coming from the laser displacement sensor that need to be connected to the DAQ but we have no information telling us where these wires are supposed to attach to the DAQ in order to run the pre existing program correctly. 
    Is there any way that we could figure this out? 
    Thank you for your help,
    mccutchen12c

    James, 
    Thank you for your help! Yes, we have looked at a couple different methods on how to tell if the information had been programmed by the previous grad students and we haven't had any success in finding that information. So I believe you are right in assuming its not documented.. We will do a better job of documenting for future grad students after us. 
    I have attached our code. Any insight you could give would be greatly appreciated!
    We have an Acuity AR200-6 laser displacement sensor with green, yellow, black and a wire that isn't wrapped that all lead to the serial port in the back of the computer and ground. We then have white, blue, orange and brown wires that do not have a location.. We did some research and the are as follows:
    white: laser disable
    blue: buttons disable
    orange: voltage output
    brown: voltage RTN
    We are starting to wonder if we are just not supposed to use the DAQ.. Can you confirm the connection is solely through a serial port? 
    Cheers, 
    Carley

  • I'm having some trouble transferring audio books to my iPhone.  It usually takes 3 or 4 tries to get all the parts transferred.  I didn't use to have this problem - all parts would transfer in one try.

    I'm having some trouble transferring audio books to my iPhone.  It usually takes 3 or 4 tries to get all the parts transferred.  I didn't use to have this problem - all parts would transfer in one try.

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

    I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

    They will simply use Migration Assistant to transfer your Home folder, third-party applications and support files, and system preferences. This is something you could do yourself. You would need a Firewire cable to connect between your old computer and your new one. Migration Assistant is installed in the Utilities folder of your new computer.
    See Transferring files between two computers using FireWire and How to use Migration Assistant to transfer files from another Mac.

  • I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the "saved"  ones before I write the new one. What to do to finally/definitely delete the save

    I copied message to SMS field and sent. After that the message still exist all the time in the SMS field. When I open the application I must always first delete the “saved”  ones before I write the new one. What to do to finally/definitely delete the save message?

    sorry it's ios6

  • How to check whether a file exist in the program folder or not?

    Hi guys,
    how to check whether a file exist in the program folder or not? Let is say i recieve a file name from user then i want to know if the file is there not and act on that base.
    abdul

    Look at the class java.io.File and the .exists() method:
    http://java.sun.com/j2se/1.4/docs/api/java/io/File.html

  • How to find if a program really exists in the system?

    Hi,
    I want to find the existing  programs in the system by an abap program. Which table should I use? TADIR or TRDIR? I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table.
    What about trdir? Should I use TRDIR?
    Thanks in advance..
    MERAL

    Thanks for your replies but my main problem is :
    " I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table." .
    In order to find an abap program really exists in the system, I plan to look at both tables, tadir and trdir, and if I find the program in both tables, I will decide that it really exists.
    Is it a right approach? What do you think?

  • If you install the program in Spanish, Can you switch to another language the part indicating the chapter's number?

    The company Aula24Horas has told to write a book in English.
    The part indicating the chapter's number is in Spanish.
    I would like to change it into English.

    Try changing the primary language on your computer to English.

  • The name "Pi" does not exist in the namespace "clr-namespace:PressureVessels".

    Pi is the name of a class. 
    I made some major modification to the program in VS 2013, then after transferring the program to another PC with VS 2012 running, I am getting many errors that says:
    The name "ClassName" does not exist in the namespace "clr-namespace:PressureVessels". 

    Cleaning removes all the stuff out your bin.
    If all this stuff is in the one solution then that's equivalent to manually deleting it.
    If your app is composed from separate dll then I maybe some versioning issue.
    If not and you can't reproduce the issue on your dev machine...
    Tricky.
    You would have mentioned it if you were putting stuff in the GAC.
    Could be a sln or csproj issue.
    They occasionally corrupt.
    What else.
    How did you get your code onto the other pc?
    Is it contained within one folder with no external references beyond .net framework ones?
    If you did something a bit dodgy with your references a dll might be coming from somewhere which is on your pc and not on this other one.
    The only other advice I can think of is to step away for a bit and do something else.
    It's all too easy to get into a flat spin when something drastic happens and one has no idea wtf is going on.
    I used to be a points hound.
    But I'm alright nooooooooooooooooooooooooooooOOOOOWWWW !

  • Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

    Hi There,
    All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
    Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
    Some of the specified files already exist in the target location. The files marked below will be replaced:
    filename.eps
    filename-01.eps
    We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
    All machines are new Quad-core MacPros running:
    - Leopard 10.5.8
    - Illustrator CS4 14.0.0
    We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
    Is anyone else experiencing this behavior?
    Any help or pointers in the right direction would be much appreciated.
    Cheers
    Ben

    Thanks for the reply.
    The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
    Why do we still use eps?
    Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
    Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
    But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
    Cheers, and thanks for the help.

  • What is the part number for the mini gbic?

    I need to replace a mini gbic from a MDS-9124. I tried very hard to find the part number but it is not clear. There are 2 part numbers writen in the gbic, but I could not confirm any of it. The part numbers that is writen are DSSFP4GSW-4 and the other is 102195-01. If someone can help I would really appreciate.

    At the switch, you could use the << show int fc1/x transceiver details >> command which would give you the programmed part-number.
    The DSS... sticker is likely the Cisco partnumber.
    It's perhaps a good habit to do at least once execute a full "show tech" of each (new_ switch and save the output. This would give you all the (least) information for the future. . . reproducing is always difficult if the part or switch is not available (anymore) ;) .
    Regards, Peter.

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Field KONP-KONWA. does not exist in the screen SAPMV13A 0201

    Hi,
    We have one BDC program to change Material Inforecord through transaction ME12. We have executed the BDC and Batch input session got created. When i execute the session, it is giving error "Field KONP-KONWA. does not exist in the screen SAPMV13A 0201 "
    But when i checked in SE51 for Program SAPMV13A and screen 0201, field KONWA exist.  I have checked in Transaction ME12, this field exist in the same screen. But still this error message is appearing.
    Is there any something wrong in BDC program.

    How are you handling the subscripts (row numbers)?  Did you actually record this BDC in SHDB, or just try to write it?  If not recorded, do yourself a favor and ALWAYS record your BDC sessions, then write to match that recording....
    chances are you need to refer to KONP-KONWA(nn) where nn is the row number in the table control....

  • Modify existing program

    Hello friends,
    Can we modify any existing SAP program.
    I heard we need Access key? is it true ?
    What is the difference between Access key and developer key?

    You have to get access key to modify the standard SAP programs. However you can use BADIs, Exits to make some enhancements or modifications.
    BADIs are explained as below:
    Business Add-Ins
    Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
    As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
    &#8226; In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
    &#8226; In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
    In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
    SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
    The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
    In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
    A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
    DEFINING THE BADI
    1) execute Tcode SE18.
    2) Specify a definition Name : ZBADI_SPFLI
    3) Press create
    4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
    multiple use.
    5) Choose the interface tab
    6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
    7) Dbl clk on interface name to start class builder . specify a method name (name,
    level, desc).
    Method level desc
    Linese;ection instance methos some desc
    8) place the cursor on the method name desc its parameters to define the interface.
    Parameter type refe field desc
    I_carrid import spfli-carrid some
    I_connid import spefi-connid some
    9) save , check and activate&#8230;adapter class proposed by system is
    ZCL_IM_IM_LINESEL is genereated.
    IMPLEMENTATION OF BADI DEFINITION
    1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
    2) Specify aname for implementation ZIM_LINESEL
    3) Specify short desc.
    4) Choose interface tab. System proposes a name fo the implementation class.
    ZCL_IM_IMLINESEL which is already generarted.
    5) Specify short desc for method
    6) Dbl clk on method to insert code..(check the code in &#8220;AAA&#8221;).
    7) Save , check and activate the code.
    Some useful URL
    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
    Now write a sample program to use this badi method..
    Look for &#8220;BBB&#8221; sample program.
    &#8220;AAA&#8221;
    data : wa_flights type sflight,
    it_flights type table of sflight.
    format color col_heading.
    write:/ 'Flight info of:', i_carrid, i_connid.
    format color col_normal.
    select * from sflight
    into corresponding fields of table it_flights
    where carrid = i_carrid
    and connid = i_connid.
    loop at it_flights into wa_flights.
    write:/ wa_flights-fldate,
    wa_flights-planetype,
    wa_flights-price currency wa_flights-currency,
    wa_flights-seatsmax,
    wa_flights-seatsocc.
    endloop.
    &#8220;BBB&#8221;
    *& Report ZBADI_TEST *
    REPORT ZBADI_TEST .
    tables: spfli.
    data: wa_spfli type spfli,
    it_spfli type table of spfli with key carrid connid.
    *Initialise the object of the interface.
    data: exit_ref type ref to ZCL_IM_IM_LINESEL,
    exit_ref1 type ref to ZIF_EX_BADISPFLI1.
    selection-screen begin of block b1.
    select-options: s_carr for spfli-carrid.
    selection-screen end of block b1.
    start-of-selection.
    select * from spfli into corresponding fields of table it_spfli
    where carrid in s_carr.
    end-of-selection.
    loop at it_spfli into wa_spfli.
    write:/ wa_spfli-carrid,
    wa_spfli-connid,
    wa_spfli-cityfrom,
    wa_spfli-deptime,
    wa_spfli-arrtime.
    hide: wa_spfli-carrid, wa_spfli-connid.
    endloop.
    at line-selection.
    check not wa_spfli-carrid is initial.
    create object exit_ref.
    exit_ref1 = exit_ref.
    call method exit_ref1->lineselection
    EXPORTING
    i_carrid = wa_spfli-carrid
    i_connid = wa_spfli-connid.
    clear wa_spfli.
    Customer User Exits:
    Customer Exit is a hook and also we have to add our own functionality so we have to write the code in include file and activate that project in CMOD.
    Whereas in User Exit ,we are writing the code in SAP namespace. So am thinking that its no need to create project and activating that project for user exit. Is it right? For User Exit also we have to create project please clarify me
    User Exits:
    User exits allow you to add additional functions to the SAP standard.
    Programs with user exits contain subroutine calls at certain points in their syntax that are identified by the prefix USEREXIT. The actual user exits are located in an include that has been assigned to a module pool. This is where customers can include any changes (enhancements) that they want to make to the system. These includes are always processed during program flow.
    Advantage: In principle, customers can modify anything they want that is found in the include (tables, structures, and so forth).
    Disadvantage: SAP cannot check the individual enhancements themselves which often leads to errors in the enhancement process.
    User exits (Function module exits) are exits developed by SAP. The exit is implemented as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    Customer exits are not available for all programs and screens found in the SAP System. You can only use customer exits if they already exist in the SAP System.
    Customer Exit
    SAP creates customer exits for specific programs, screens, and menus within standard applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
    If you want to enhance the functionality of your SAP System, you should take advantage of the exits available in standard applications. There are two main reasons why you should use exits rather than modifying SAP software yourself. Add-ons attached to exits have the advantage that:
    &#8226; They do not affect standard SAP source code
    When you add new functionality to your SAP System using SAP&#8217;s exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAP&#8217;s standard software package.
    &#8226; They do not affect software updates
    When you add new functionality to your SAP System using SAP&#8217;s exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects&#8217; names ensure that they will not be affected by any changes or new additions to the standard software package.
    Customer exits are not available for all programs and screens found in the SAP System. You can only use customer exits if they already exist in the SAP System. You can find more information about locating applications with pre-defined exits in Locating Applications that have Exits

Maybe you are looking for