Transferring files from old Macintosh HD (G4 Power Mac) to replacement

I have had to install a new hard drive on my G4 Power Mac. How do you transfer Address Book and Mail files and Firefox bookmarks from the old hard drive? The old hard drive is still running although it has 4 bad blocks and causes freezing, hence replacing it. I should be very grateful for instruction over this.

the easiest would be to us Migration assistant to transfer all users (including all their user info) from the old HD to the new one. It will also,let you transfer apps if you like. If you insist on transferring only3 things you mentioned then copy the following from the old hard drive to the corresponding locations on the new one
~/Library/Mail
~/Library/Application Support/Address Book
~/Library/Application Support/Firefox
~/Library/Preferences/com.apple.mail.plist
everywhere above ~ means your home directory = /Users/username

Similar Messages

  • New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

    New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

    "guess no one can help me. thanks anyway have a great night everyone"
    Some of us do find time to sleep.

  • Transferring files from old computer with fire wire

    I'm transferring files from my old computer to my new one. The old one has three hard drives. Everything from the startup drive transferred OK over fire wire, but the new computer doesn't see the 2nd and 3rd hard drives on the old one. Is there a way to link these? Thanks!

    Click here and follow the instructions, setting up FireWire networking from System Preferences if desired. FireWire Target Disk mode will only connect to the master ATA drive on the ATA 0 bus, and will shut down the computer if there's nothing at that location.
    (30151)

  • How do I merge transfered files from a PC to my new Mac

    I recently transfered files from a PC to my Mac but they did not merge with the existing Mac files but ended in a different location under a separate password access. How do I merge these new files with the existing Mac files?

    Try to simply copy the files and past them at the location of your Mac files.... you will be notified of duplicate files.
    From here you can click "Keep Both", "Stop" or "Replace"
    Click on "Replace"
    *****WARNING*******
    This process will NOT look at which file is newer of the two, it will simply replace one file for the other so MAKE SURE you are not replace the new files with old once.

  • Transfering files from old MacMook that can no longer draw power to a new MacBook Pro

    I have an old MacMook that can no longer draw power. I want to transfer the files from the old, broken MacBook harddrive to a new MacBook Pro that I just bought. I was curious how to do that since the old MacBook cannot use power.

    Get an exterior enclosure & put the hard drive from your old Mac into it & they attach to your new computer.

  • Help transferring files from old Mac 10.3.9 to new Mac 10.6.1

    Hi - I just bought a new iMac with Snow Leopard and I am trying to transfer my old files from my iMac running 10.3.9. I connected a FireWire cable between the two and restarted the old iMac while holding down the "t" key, using Migration Assistant on the new iMac. Migration Assistant kept saying that it was waiting for the old iMac to restart, even though the old one HAD restarted. I looked on the forums and saw that I should try to run Setup Assistant from the Utilities folder on the old iMac. But there isn't a Setup Assistant in the Utilities folder.
    So I am at an impasse. Any suggestions would be greatly appreciated!

    Some of the items I've found via searching suggest to avoid transfer or migration of older
    files from the ancient 10.3 over to the newer 10.5 or 10.6. And when the old computer is
    a PowerPC, the new Intel-based Mac may not see or be able to use some of the items.
    The older Setup Assistant is supposed to do for Panther 10.3 what the newer Migration
    Assistant does for Tiger 10.4; to an extent. The results from the older system are limited.
    There is a way to have the new computer import some of the older computer's user files
    and account info into it, before its first run; but with a leap so great between 10.3 & 10.6,
    the results overall won't be as satisfactory as just running the new computer totally new;
    going through the setup and upgrade processes independent of the old Mac altogether.
    The Apple Support- Snow Leopard page should have some upgrade and migration help
    info on there which may be helpful: http://www.apple.com/support/snowleopard/
    It would appear that the instructions for migrating from an older Mac to one running 10.5
    or 10.6 apply to the older computer, so the Panther software may be secondary if it really
    matters at all in this process. See this document, and wonder along with me... This is not
    quite the same as a migration assistant; but you don't need FW Target Disk in either case.
    • Mac OS X 10.5, 10.6:
    How to use Migration Assistant to transfer files from another Mac
    http://support.apple.com/kb/HT3322
    The older method may not apply in the path you've chosen, outlined here, below;
    but note there are matters about file and older app compatibility in the newer OS:
    • Mac OS X 10.3, 10.4:
    Transferring data with Setup Assistant - Migration Assistant FAQ
    http://support.apple.com/kb/HT1554
    In the past, I've done a bit of upgrade and some migration action and found that overall,
    the new OS X seemed to work a lot better with nothing old involved. That's just me!
    And I'm sure each individual's mileage may vary...
    Good luck & happy computing!
    { edited for no great reason }

  • Transfering files from old mac to new mac

    I just bought a iMac G5 and started it up and it asked if I wanted to transfer files from my old mac. I selected yes. And it began transferring. It looked like everything was going fine until I checked on it about 30 minutes later and it looked like it hadn't progressed at all. I checked on it another 30 minutes later and it said 1 hour 6 minutes remaining and hasn't moved since. I don't understand why it's not going further. And it's taking forever! Am I just too impatient. I'm transferring 5GB from my old PowerPC G4 mac using a firewire cable. Any help is much appreciated. I have no idea why it's not working.

    A couple of other things to consider Emille,
    1. Make sure your data is really going through the firewire cable and not a wireless network. Going through an ethernet or firewire cable would be much faster. It may have been possible that even though you had a cable connected, It may have tried to do it wirelessly anyway.
    2. Were either of them going to sleep?
    3. Make sure no other firewire devices are plugged in.
    Joe

  • Transferring some files from old hard drive to new mac book pro: How do I do this?  I bought a SATA Wire, and can't figure out how to get my files

    Hi there, my old mac book recently died and I opted to buy a new macbook pro, instead of pouring lots of money into the old computer.  I was able to get my hard drive out, and I bought a 2.5" Sata Nootbook Drive Upgrade Kit.  I have also installed superduper!....but I can't really figure out how to get everything to work.  I just want to be able to take some of my files from my hard drive, not everything...
    Any suggestions?
    Thanks!

    I don't know what a "2.5" Sata Nootbook Drive Upgrade Kit" is but if you have a internal drive you need to connect all you needed was a $20 IDE/SATA to USB adapter
    You don't need Superduper, that's software designed to clone a entire Mac's boot drive to a external drive for bootable backup purposes using the same machine/make/model.
    Since the new Mac is different than the old one you can't clone (well you could but it will break the machine) the old drive to the new one.
    However you can use the adapter above and software Apple provides in the Utilities folder on the NEW MAC, called Migration Assistant to transfer your User to the new machine.
    However this might not be the best course of action as it can transfer unwanted data and cause problems in the Library, old programs that won't run on 10.7, etc.
    You can simply create the same named user on the machine (System Preferences > Accounts) log into it and then connect the external drive with the adapter and copy the contents of your users folders over and place into the same.
    It's always good to have another Admin level user account on the machine in case the primary one has a User based issue and you need to log into the other and grab files. So if either manually or via using Migration Assistant you wind up with two user accounts on the machine, it's really not that big of a deal.

  • Transferring files from old iMac

    Hey,
    I just did the transfer via firewire of my old files from my old iMac to my new macbook.
    I want to scrap everything that came in.
    Wish I hadnt done it. Is there any sort of "undo" feature?
    should I trash everything on the harddrive and reinstall with the discs that came with the macbook?
    thanks!

    1. Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
    2. Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
    3. Click Options. If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings." If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
    4. Click Continue.
    5. Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
     An Apple User Group 
    ITMS: MacOSG Podcast

  • Transferring files from old macbook to new

    I'm trying to transfer files and programs from old macbook pro to new one, but run into problems using Migration Assistant, and time machine.  Not sure what to do differently...

    Probably the most straightforward way to get iTunes onto your new computer is to network the two and copy your iTunes folder across. This works fine if you have been using iTunes to completely manage your music and all your songs are in iTunes Music not in different folders. Connecting two Mac computers using Ethernet
    Another way is to put your original computer into target disk mode and copy the data over Firewire: How to use FireWire target disk mode
    Copying the whole folder brings with it the iTunes Music folder and also the iTunes Library (iTunes Library.itl in Windows) database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
    When you copy the iTunes folder make sure you put it into the same location on the new computer. This has to be the exact same place, on a Mac this would be in Username/Music/. When you open iTunes on the new computer it will be the same as on the original one Songs, Playlists, Play Counts, Ratings etc. When I moved iTunes a while ago for my daughter I was also using the same version of iTunes, not sure how important that is but it's probably worth keeping them the same.

  • Transferring files from old computer freezes on Mac Pro

    Hi everyone-
    I'm new around here and I'm having a problem. I just bought the Mac Pro and right now I am trying to transfer my files from my older computer to this new one. My old computer is a Powerbook G4 Laptop, and I want some files to be on the Mac Pro. So I attached a firewire cable to the Powerbook G4 and to the Mac Pro, and I booted up the Powerbook G4 and held the 'T' button down like you are supposed to. The Powerbook then shows up in the finder window on the Mac Pro, but then all of a sudden the Mac Pro freezes. Even when it didn't freeze, I clicked on the Powerbook G4 Hard Drive icon in the finder window, and some of the drive's contents load but then I just get the spinning colored pinwheel. And nothing happens! Why is this happening, can someone help me out? I tried it earlier and it worked, but now it is repeatedly not working. Thanks!

    If you have both computer connected to the same internet connection there's nothing to do cable-wise. All you need to do is…
    1) Go to the Sharing System Preference and turn in Personal File Sharing on one of the system, preferably the PowerBook
    2) Go to the other system and select the Network menu item from the Go menu (in the Finder)
    3) You should now find your other system here and double click on it
    4) You should now be asked to log in, just use the log in details you would use to start the other system
    5) Now you will be asked which "volume" you want to connect to (select the one that is names you login if you only want to copy documents)
    6) You will now have access to the other computer with a disk mount on yur Desktop

  • Reoccuring HANGING problem with transferring files from old MACBOOK

    ok, so I recently bought a iMac and i wanted to transfer my music and photo files from my older (waterdamaged a while back but still works fine) macbook. I've tried basically every method to try and get this done.
    I've tried migration assistant, transferring the files through a shared wireless network, through firewire/disk target mode, but all of those methods i tried resulted in hanging very early on in the transferring and copying operation.
    I believe it must have something to do with my macbook's hard drive, but i have no idea what to do at this point. Could someone please help me?

    the thing is tho, the hard drive had no problems copying and transferring for over a year after the damage, while i continued to use it. I don't a reason why it wouldn't work now when i finally want to move a larger number of files at once (itunes music folder, iphoto library)

  • Transferring files from old computer to new one

    I just purchased an HP Envy 700 series and am trying to transfer my files from my old computer.  My problem is that the old computer has a fried motherboard so I put the old hard drive in an external case and hooked it up to the new computer to transfer the files.  When I try to access the "users" folder on the old drive I get a message telling me I don't have permission to access the folder.  Is there anything I can do to get past this? 

    The OS on the old computer was Windows 7 Home and the new one is Windows 7 Pro. 
    I have developed a work around for my problem.  I put the old hard drive in an external case and then hooked it up to my laptop.  I then lower the User Account Control setting to its lowest setting (after I turn off my access to the internet) and then I am able to access all the files in the account that was blocked before.  It is tedious trying to transfer many GB's of data using a thumb drive but it is getting done.

  • Transferring files from old Beige G3 machine to new G5 Dual Core (10.4.3)

    Someone please help me. I'm desperately trying to move some files from my old G3 (9.2) to my new G5.
    I have tried to use an ethernet cable. I turned on file sharing on the G3, and the G5 still isn't 'auto-sensing' the cable connection.
    I have usb 2.0 on the old machine. Perhaps I could use a usb cable to transfer the files?

    Welcome to Apple Discussions!
    As the G3 is not autosensing, you need a crossover cable or a router.
    See these instructions I wrote here:
    http://www.macmaps.com/network9X.html
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • Creating a new user account and transferring files from old account

    I am now having more problems than I can handle with my Leopard installation...problems such as applications that refuse quit no matter what ~ even after attempting force quit them and/or attempting to "sudo kill -9 PID", and now that I am having problems with Adobe Lightroom not even being able to remain open on my user account for more than 10 seconds max before it crashes without provocation (yet runs fine on a troubleshooting account I created on the same machine), I would now like to create a new user account on my MacPro Leopard 10.5.6 and transfer my files from the previous (problematic) user account, but I've never done so in the past...
    Can someone give me a basic rundown of how to go about doing this as a means of troubleshooting my current sickly user account (and if you could also please let me know which files I should avoid restoring to the newly created user account so that I don't screw that one up as well, I would appreciate it)
    Any suggestions would be greatly appreciated... Thanks!

    While logged into the troubleshooting account (assuming that it's an admin account—if not create a new one and log into it), backup the bad account's folder, delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.
    See http://discussions.apple.com/thread.jspa?messageID=4703015 for more details on this process.

Maybe you are looking for