Transferring itunes to new itunes via ethernet cable

I want to transfer the music from my old itunes to the itunes on my new computer. As my old computer is pretty much knackered, the easiest way for me to do this i figure is via ethernet cable. can this be done, and if so, how do i go about doing it?

Sure, get a crossover ethernet cable.
Windows has built-in utilities to get this done. You didn't say which OS you are using, but here is an example for XP
http://www.microsoft.com/windowsxp/using/setup/getstarted/bott_fstw.mspx

Similar Messages

How to use Migration Assistant when trying to transfer from MacBook to a new iMac via Ethernet cable

I've been trying to transfer data from my MacBook to my new iMac via Ethernet cable and I get to the point of the transfer starting. Then on my iMac the Migration Assistant shuts down and takes me back to my desktop. Any ideas on why this keeps happening?

Start over, restoring the OS on the new machine, and follow the steps outlined in Pondini's Setup New Mac guide using the Setup Assistant.

I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable. I was confused about consolidating my accounts, so I continued to use my old MacBook. Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively? How do I consolidate my existing accounts?
Thank you.

Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts ?

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?

Yes, you ran into a very understandable problem.
When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account.

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

I am transferring to a new itunes account

- I know how to use the transfer apps tab but will it also pull through all the purchase history (useful if it does because I often delete and then reinstall apps!). It helps with memory management this way but the point is does transferring to a new itunes account only transfer current apps or let you have a record of the old apps purchased as well? Thanks all!!!

You can't "transfer" any purchased iTunes content from one iTunes account to another. That's basically merging iTunes accounts, which cannot be done at the present.

How to migrate PowerBook G4 Tiger to new MacBook Pro 15" Lion via ethernet cable? Migration Assistant to old to update, apparently.

How to migrate PowerBook G4 Tiger to new MacBook Pro 15" Lion via ethernet cable? Migration Assistant to old to update, apparently.

Ah, a Powerbook. I miss that. Anyways, I believe that the Powerbook G4 has an Firewire 400/800 port. Why don't you do that? It's fast, and you don't have to set up one of those funky reverse wire ethernet cables. I wouldn't use Migration Assistant, but that's just me. Too many issues. I'd start up your brand new MacBook Pro and during the setup assistant, it'll ask you to transfer data from an older Mac. Using firewire with a Target Disk Mode, it's pretty fast.
If you have already opened up your new Mac and are using it, then use Migration assistant, but also with the Firewire (preferably 800).

Transfering files from PC to Mac via ethernet cable

I have been unable to connect my Mac for file transfer. I followed the directions on the following sites:
http://docs.info.apple.com/article.html?artnum=304721
http://docs.info.apple.com/article.html?artnum=106471
I connected both computer via an ethernet cable and used the 'Connect to Server' option in the finder. It searches for a while and then gives me the following error:
The Finder cannot complete the operation because some of the data in "smb://5.173.180.164/SharedDocs" could not be read or written. (Error code -36).
The folder i specified is open for sharing and i've run the network wizard on the PC. I can't seem to figure out what's wrong.
I appreciate any help you can give.
Message was edited by: jaboc77

You can connect them via ethernet cable. It will work fine.
No special software needed on either side.
What is it you are trying to do? Share files? Printers? Internet?
This article from iFelix may offer some help to you:
http://www.ifelix.co.uk/tech/3020.html

Setting Up Time Capsule Via Ethernet Cable only no wireless involved.

I've just got TC to act just as a hard drive for my PowerBook(its got all the latest softwear)
It seams like all the setup details are in relation to a wireless net works. I don't want it to have anything to do with my wireless net work, that sounds like a accident waiting to happen.
All I want to do is copy my Itunes library on to it via a ethernet cable. I was assured I would be able to do this very easily at the Apple store, well after they stopped trying to sell me a new computer that is.
Any advise would be greatly appreciated, as it just sate there with a flashing amber light on it now.
there was me expecting/hoping it would be as easy as plugging in a new Ipod.
Cheers ..

I also have my time capsule connected via ethernet cable to my i-Mac the ethernet cable from my dsl modem goes into the WAN port. The gurus on the site may correct me but I don't think that you will ever get a green light unless your internet is plugged into the WAN port. Even with the flashing amber light the time capsule should function as a backup drive if everything else is setup right.

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

Not without a player..
The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!!

My Apple TV will not update to the latest software, dose anyone know what the problem is, I've reset, tried to do it wirelessly as well as while connected via Ethernet cable.. Both have resulted in the same message!! Update unsuccessful, current software version is 5.1 (5201) . I've rented a movie recently and does not appear in my movie list, but I have been charged for this movie, can someone help me out with these issues.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
If when you choose restore you get a message that the device cannot be found, download the file below
Apple TV Software Restore 5.1.1 (2nd generation)
Apple TV Software Restore 5.1.1 (3rd generation)
Then hold down the option key while choosing restore and select the downloaded file when prompted.

I have an HP LaserJet 8150N that I am trying to get connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer.

I have an HP LaserJet 8150N that I use for my work and I have had this printer for ever and it is one heck of a work horse! I am trying to get it connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer. I have tried to reconfigure the printer using the JetDirect menu giving it a new IP address but still no luck. If anyone could help me through this issue I would appreciate it.

moonlightcaravan wrote:
Second, seeing "connecting" and connection failed is normal. You must click on "Connect As" in the Finder window and then enter the username and password for the admin account on the other computer. That should fix things.
Thanks for responding.
When does clicking on "Connect As" happen in the process above?
After step six? Seven?
After the connection has failed?
Is this the FInder window that shows the icon of the computer you want to copy the file from?
You should see "Connect As" in the Finder near the top right of the window as shown below:
!http://blog.brothersoft.com/wp-content/uploads/2008/11/howto_copy_files_to_or_from_your_iphone02.jpg!

Time capsule to tether a DVD player via Ethernet cable?

I've bought a new time capsule for my main wireless network. Can I use an old time capsule to connect to the network and then tether a DVD player via Ethernet cable?

Yes, but keep in mind that the "Ethernet" connection from the old Time Capsule to the DVD player will only be as good as the quality of the wireless connection between the two Time Capsules.....assuming you plan to connect the older TIme Capsule wirelessly to the network.
If you plan to connect the old Time Capsule to the new using a wired Ethernet connection, then things will be just fine.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know). What gives? It works fine when the PC is off.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of). What gives? When the PC is turned off, everything is totally fine. I\m stumped.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
I suspect a problem with your router. Try changing the security. First use no security as a test.
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

AirPort Express via ethernet cable/Wireless.

I have an iMac upstairs, and want to stream music to my HI-Fi downstairs. My new AirPort Express has a green light and is found via Airport Utility on the iMac when connected to my modem (BT HomeHub, downstairs)) via ethernet cable. But once unplugged from the modem so I can use it near the Hi-Fi it is not found via wireless, and has a flashing amber light. I only want to stream music from iMac to Hi-Fi. I set it up to join the existing network - the guy in the Apple store assured me I didn't need to be connected by ethernet to the modem, that it would work via WiFi. What am I doing wrong?

Thanks to edex67 for providing the info that the Home Hub will work with WPA/WPA2 Personal security.
Please locate the Express temporarily in the same room or an adjacent room as the Home Hub.
Perform a Factory Default Reset on the Express to get everything back to a known state as follows:
Pull the Express from power
Wait a few minutes
Hold in the reset button first, and keep holding it for an additional 9-10 seconds while you simultaneously plug the power back into the Express
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
Click the AirPort icon at the top of the Mac's screen and make sure that you are connected to Apple Network xxxxxx. No password is required.
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Click on the AirPort Express and then click Manual Setup
Click the Base Station tab below the row of icons to assign a device name to the Express, device password, and adjust Time Zone Settings. The settings should look like this:
Next, click the Wireless tab located next to the Base Station tab. Adjust settings as follows:
Wireless Mode = Join a wireless network (You might have to hold down the option key on the Mac while you click on the selection box to see the "Join" setting appear)
Wireless Network Name = Name of the Home Hub Network
Enter a check mark next to Allow Ethernet Clients if you want to enable the Ethernet port
Wireless Security = WPA/WPA2 Personal
Wireless Password = Home Hub wireless network password
Verify Password
Click the Update button at the lower right
Close AirPort Utility as soon as you see the message that the configuration has been stored on the Express
Wait 45-60 seconds for a green light
Move the Express to the desired location and power it back up, connect speakers, etc.

Transferring itunes to new itunes via ethernet cable

Similar Messages

Maybe you are looking for